Gitiles
Code Review Sign In
gerrit.openbmc.org / openbmc / phosphor-power / 768d22693b116f343a476d3f4f9a1dca86555d6e
commit768d22693b116f343a476d3f4f9a1dca86555d6e[log] [tgz]
authorShawn McCarney <shawnmm@us.ibm.com>Tue Jul 09 15:02:59 2024 -0500
committerShawn McCarney <shawnmm@us.ibm.com>Wed Jul 10 14:21:39 2024 +0000
treeee632e22790b4c343e1ae5f260d05f8979ac5770
parentdd6c3661c5e9a0d2790a0494c58117fa9e37dd2b [diff]
Move to std::format

The OpenBMC project is moving from the fmt project to the built-in
std::format() support.

Update source files and meson files to move to std::format().

Tested:
* Verified builds cleanly in local CI
* Verified all automated tests run successfully
* Verified builds cleanly in bitbake
* Verified an affected phosphor-psu-monitor journal message still works
  correctly.
* Verified an affected phosphor-power-sequencer journal message still
  works correctly.

Change-Id: I97b63cf9d132e2b6f173afb30953a9083d68133f
Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>
8 files changed
tree: ee632e22790b4c343e1ae5f260d05f8979ac5770
  1. cold-redundancy/
  2. example/
  3. org/
  4. phosphor-power-sequencer/
  5. phosphor-power-supply/
  6. phosphor-regulators/
  7. power-sequencer/
  8. power-supply/
  9. services/
  10. subprojects/
  11. test/
  12. tools/
  13. .clang-format
  14. .gitignore
  15. .shellcheck
  16. compatible_system_types_finder.cpp
  17. compatible_system_types_finder.hpp
  18. dbus_interfaces_finder.cpp
  19. dbus_interfaces_finder.hpp
  20. device.hpp
  21. device_monitor.hpp
  22. elog-errors.hpp
  23. file_descriptor.hpp
  24. gpio.cpp
  25. gpio.hpp
  26. LICENSE
  27. meson.build
  28. meson.options
  29. names_values.hpp
  30. OWNERS
  31. pmbus.cpp
  32. pmbus.hpp
  33. README.md
  34. temporary_file.cpp
  35. temporary_file.hpp
  36. temporary_subdirectory.cpp
  37. temporary_subdirectory.hpp
  38. types.hpp
  39. utility.cpp
  40. utility.hpp
README.md

Overview

This repository contains applications for configuring and monitoring devices that deliver power to the system.

Actively-maintained applications:

  • cold-redundancy: Application that makes power supplies work in Cold Redundancy mode and rotates them at intervals.
  • phosphor-power-sequencer: JSON-driven application that powers the chassis on/off and monitors the power sequencer device.
  • phosphor-power-supply: Next generation power supply monitoring application.
  • phosphor-regulators: JSON-driven application that configures and monitors voltage regulators.
  • tools/power-utils: Power supply utilities.

Legacy applications:

  • power-sequencer: Original power sequencer monitoring application.
  • power-supply: Original power supply monitoring application.

Build

To build all applications in this repository:

  meson setup build
  ninja -C build

To clean the repository and remove all build output:

  rm -rf build

You can specify meson options to customize the build process. For example, you can specify:

  • Which applications to build and install.
  • Application-specific configuration data, such as power sequencer type.
  • Whether to build tests.

Power Supply Monitor and Util JSON config

Several applications in this repository require a PSU JSON config to run. The JSON config file provides information for:

  • Where to access the pmbus attributes
  • Which attribute file in pmbus maps to which property and interface in D-Bus
  • Which kernel device directory is used on which PSU

There is an example psu.json to describe the necessary configurations.

  • inventoryPMBusAccessType defines the pmbus access type, which tells the service which sysfs type to use to read the attributes. The possible values are:
    • Base: The base dir, e.g. /sys/bus/i2c/devices/3-0069/
    • Hwmon: The hwmon dir, e.g. /sys/bus/i2c/devices/3-0069/hwmon/hwmonX/
    • Debug: The pmbus debug dir, e.g. /sys/kernel/debug/pmbus/hwmonX/
    • DeviceDebug: The device debug dir, e.g. '/sys/kernel/debug/./`
    • HwmonDeviceDebug: The hwmon device debug dir, e.g. /sys/kernel/debug/pmbus/hwmonX/cffps1/
  • fruConfigs defines the mapping between the attribute file and the FRU inventory interface and property. The configuration example below indicates that the service will read part_number attribute file from a directory specified by the above pmbus access type, and assign to PartNumber property in xyz.openbmc_project.Inventory.Decorator.Asset interface.
      "fruConfigs": [
    {
      "propertyName": "PartNumber",
      "fileName": "part_number",
      "interface": "xyz.openbmc_project.Inventory.Decorator.Asset"
    }
  ]
  • psuDevices defines the kernel device dir for each PSU in inventory. The configuration example below indicates that powersupply0's device is located in /sys/bus/i2c/devices/3-0069.
      "psuDevices": {
    "/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0" : "/sys/bus/i2c/devices/3-0069",
  }