blob: 1d1e105b4f105f4663705f1acb522a3aa89f5280 [file] [log] [blame]
#pragma once
#include "pmbus.hpp"
#include "types.hpp"
#include "util.hpp"
#include "utility.hpp"
#include <gpiod.hpp>
#include <sdbusplus/bus/match.hpp>
#include <filesystem>
#include <stdexcept>
namespace phosphor::power::psu
{
#if IBM_VPD
// PMBus device driver "file name" to read for CCIN value.
constexpr auto CCIN = "ccin";
constexpr auto PART_NUMBER = "part_number";
constexpr auto FRU_NUMBER = "fru";
constexpr auto SERIAL_HEADER = "header";
constexpr auto SERIAL_NUMBER = "serial_number";
constexpr auto FW_VERSION = "fw_version";
// The D-Bus property name to update with the CCIN value.
constexpr auto MODEL_PROP = "Model";
constexpr auto PN_PROP = "PartNumber";
constexpr auto SPARE_PN_PROP = "SparePartNumber";
constexpr auto SN_PROP = "SerialNumber";
constexpr auto VERSION_PROP = "Version";
// ipzVPD Keyword sizes
static constexpr auto FL_KW_SIZE = 20;
#endif
constexpr auto LOG_LIMIT = 3;
constexpr auto DEGLITCH_LIMIT = 3;
/**
* @class PowerSupply
* Represents a PMBus power supply device.
*/
class PowerSupply
{
public:
PowerSupply() = delete;
PowerSupply(const PowerSupply&) = delete;
PowerSupply(PowerSupply&&) = delete;
PowerSupply& operator=(const PowerSupply&) = delete;
PowerSupply& operator=(PowerSupply&&) = delete;
~PowerSupply() = default;
/**
* @param[in] invpath - String for inventory path to use
* @param[in] i2cbus - The bus number this power supply is on
* @param[in] i2caddr - The 16-bit I2C address of the power supply
* @param[in] gpioLineName - The gpio-line-name to read for presence. See
* https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md
*/
PowerSupply(sdbusplus::bus::bus& bus, const std::string& invpath,
std::uint8_t i2cbus, const std::uint16_t i2caddr,
const std::string& gpioLineName);
phosphor::pmbus::PMBusBase& getPMBus()
{
return *pmbusIntf;
}
GPIOInterfaceBase* getPresenceGPIO()
{
return presenceGPIO.get();
}
std::string getPresenceGPIOName() const
{
if (presenceGPIO != nullptr)
{
return presenceGPIO->getName();
}
else
{
return std::string();
}
}
/**
* Power supply specific function to analyze for faults/errors.
*
* Various PMBus status bits will be checked for fault conditions.
* If a certain fault bits are on, the appropriate error will be
* committed.
*/
void analyze();
/**
* Write PMBus ON_OFF_CONFIG
*
* This function will be called to cause the PMBus device driver to send the
* ON_OFF_CONFIG command. Takes one byte of data.
*
* @param[in] data - The ON_OFF_CONFIG data byte mask.
*/
void onOffConfig(uint8_t data);
/**
* Clears all the member variables that indicate if a fault bit was seen as
* on in the STATUS_WORD or STATUS_MFR_SPECIFIC response.
*/
void clearFaultFlags()
{
inputFault = false;
mfrFault = false;
statusMFR = 0;
vinUVFault = false;
cmlFault = false;
voutOVFault = false;
ioutOCFault = false;
voutUVFault = false;
fanFault = false;
tempFault = false;
pgoodFault = 0;
psKillFault = false;
ps12VcsFault = false;
psCS12VFault = false;
}
/**
* Write PMBus CLEAR_FAULTS
*
* This function will be called in various situations in order to clear
* any fault status bits that may have been set, in order to start over
* with a clean state. Presence changes and power state changes will
* want to clear any faults logged.
*/
void clearFaults();
/**
* @brief Adds properties to the inventory.
*
* Reads the values from the device and writes them to the
* associated power supply D-Bus inventory object.
*
* This needs to be done on startup, and each time the presence
* state changes.
*
* Properties added:
* - Serial Number
* - Part Number
* - CCIN (Customer Card Identification Number) - added as the Model
* - Firmware version
*/
void updateInventory();
/**
* @brief Accessor function to indicate present status
*/
bool isPresent() const
{
return present;
}
/**
* @brief Returns the last read value from STATUS_WORD.
*/
uint64_t getStatusWord() const
{
return statusWord;
}
/**
* @brief Returns the last read value from STATUS_INPUT.
*/
uint64_t getStatusInput() const
{
return statusInput;
}
/**
* @brief Returns the last read value from STATUS_MFR.
*/
uint64_t getMFRFault() const
{
return statusMFR;
}
/**
* @brief Returns the last read value from STATUS_CML.
*/
uint64_t getStatusCML() const
{
return statusCML;
}
/**
* @brief Returns the last read value from STATUS_VOUT.
*/
uint64_t getStatusVout() const
{
return statusVout;
}
/**
* @brief Returns the last value read from STATUS_IOUT.
*/
uint64_t getStatusIout() const
{
return statusIout;
}
/**
* @brief Returns the last value read from STATUS_FANS_1_2.
*/
uint64_t getStatusFans12() const
{
return statusFans12;
}
/**
* @brief Returns the last value read from STATUS_TEMPERATURE.
*/
uint64_t getStatusTemperature() const
{
return statusTemperature;
}
/**
* @brief Returns true if a fault was found.
*/
bool isFaulted() const
{
return (hasCommFault() || vinUVFault || inputFault || voutOVFault ||
ioutOCFault || voutUVFault || fanFault || tempFault ||
(pgoodFault >= DEGLITCH_LIMIT) || mfrFault);
}
/**
* @brief Return whether a fault has been logged for this power supply
*/
bool isFaultLogged() const
{
return faultLogged;
}
/**
* @brief Called when a fault for this power supply has been logged.
*/
void setFaultLogged()
{
faultLogged = true;
}
/**
* @brief Returns true if INPUT fault occurred.
*/
bool hasInputFault() const
{
return inputFault;
}
/**
* @brief Returns true if MFRSPECIFIC occurred.
*/
bool hasMFRFault() const
{
return mfrFault;
}
/**
* @brief Returns true if VIN_UV_FAULT occurred.
*/
bool hasVINUVFault() const
{
return vinUVFault;
}
/**
* @brief Returns true if VOUT_OV_FAULT occurred.
*/
bool hasVoutOVFault() const
{
return voutOVFault;
}
/**
* @brief Returns true if IOUT_OC fault occurred (bit 4 STATUS_BYTE).
*/
bool hasIoutOCFault() const
{
return ioutOCFault;
}
/**
* @brief Returns true if VOUT_UV_FAULT occurred.
*/
bool hasVoutUVFault() const
{
return voutUVFault;
}
/**
*@brief Returns true if fan fault occurred.
*/
bool hasFanFault() const
{
return fanFault;
}
/**
* @brief Returns true if TEMPERATURE fault occurred.
*/
bool hasTempFault() const
{
return tempFault;
}
/**
* @brief Returns true if there is a PGood fault (PGOOD# inactive, or OFF
* bit on).
*/
bool hasPgoodFault() const
{
return (pgoodFault >= DEGLITCH_LIMIT);
}
/**
* @brief Return true if there is a PS_Kill fault.
*/
bool hasPSKillFault() const
{
return psKillFault;
}
/**
* @brief Returns true if there is a 12Vcs (standy power) fault.
*/
bool hasPS12VcsFault() const
{
return ps12VcsFault;
}
/**
* @brief Returns true if there is a 12V current-share fault.
*/
bool hasPSCS12VFault() const
{
return psCS12VFault;
}
/**
* @brief Returns the device path
*
* This can be used for error call outs.
* Example: /sys/bus/i2c/devices/3-0068
*/
const std::string getDevicePath() const
{
return pmbusIntf->path();
}
/**
* @brief Returns this power supplies inventory path.
*
* This can be used for error call outs.
* Example:
* /xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply1
*/
const std::string& getInventoryPath() const
{
return inventoryPath;
}
/**
* @brief Returns the firmware revision version read from the power supply
*/
const std::string& getFWVersion() const
{
return fwVersion;
}
/**
* @brief Returns the model name of the power supply
*/
const std::string& getModelName() const
{
return modelName;
}
/** @brief Returns true if the number of failed reads exceeds limit
* TODO: or CML bit on.
*/
bool hasCommFault() const
{
return ((readFail >= LOG_LIMIT) || (cmlFault));
}
/**
* @brief Reads the pmbus input voltage and returns that actual voltage
* reading and the calculated input voltage based on thresholds.
* @param[out] actualInputVoltage - The actual voltage reading, in Volts.
* @param[out] inputVoltage - A rounded up/down value of the actual input
* voltage based on thresholds, in Volts.
*/
void getInputVoltage(double& actualInputVoltage, int& inputVoltage) const;
private:
/** @brief systemd bus member */
sdbusplus::bus::bus& bus;
/** @brief Will be updated to the latest/lastvalue read from STATUS_WORD.*/
uint64_t statusWord = 0;
/** @brief Will be updated to the latest/lastvalue read from STATUS_INPUT.*/
uint64_t statusInput = 0;
/** @brief Will be updated to the latest/lastvalue read from STATUS_MFR.*/
uint64_t statusMFR = 0;
/** @brief Will be updated to the latest/last value read from STATUS_CML.*/
uint64_t statusCML = 0;
/** @brief Will be updated to the latest/last value read from STATUS_VOUT.*/
uint64_t statusVout = 0;
/** @brief Will be updated to the latest/last value read from STATUS_IOUT.*/
uint64_t statusIout = 0;
/** @brief Will be updated to the latest/last value read from
* STATUS_FANS_1_2. */
uint64_t statusFans12 = 0;
/** @brief Will be updated to the latest/last value read from
* STATUS_TEMPERATURE.*/
uint64_t statusTemperature = 0;
/** @brief True if an error for a fault has already been logged. */
bool faultLogged = false;
/** @brief True if bit 1 of STATUS_WORD low byte is on. */
bool cmlFault = false;
/** @brief True if bit 5 of STATUS_WORD high byte is on. */
bool inputFault = false;
/** @brief True if bit 4 of STATUS_WORD high byte is on. */
bool mfrFault = false;
/** @brief True if bit 3 of STATUS_WORD low byte is on. */
bool vinUVFault = false;
/** @brief True if bit 5 of STATUS_WORD low byte is on. */
bool voutOVFault = false;
/** @brief True if bit 4 of STATUS_WORD low byte is on. */
bool ioutOCFault = false;
/** @brief True if bit 7 of STATUS_WORD high byte is on and bit 5 (VOUT_OV)
* of low byte is off. */
bool voutUVFault = false;
/** @brief True if FANS fault/warn bit on in STATUS_WORD. */
bool fanFault = false;
/** @brief True if bit 2 of STATUS_WORD low byte is on. */
bool tempFault = false;
/**
* @brief Incremented if bit 11 or 6 of STATUS_WORD is on. PGOOD# is
* inactive, or the unit is off.
*
* Considered faulted if reaches DEGLITCH_LIMIT.
*/
size_t pgoodFault = 0;
/**
* @brief Power Supply Kill fault.
*/
bool psKillFault = false;
/**
* @brief Power Supply 12Vcs fault (standby power).
*/
bool ps12VcsFault = false;
/**
* @brief Power Supply Current-Share fault in 12V domain.
*/
bool psCS12VFault = false;
/** @brief Count of the number of read failures. */
size_t readFail = 0;
/**
* @brief Examine STATUS_WORD for CML (communication, memory, logic fault).
*/
void analyzeCMLFault();
/**
* @brief Examine STATUS_WORD for temperature fault.
*/
void analyzeTemperatureFault();
/**
* @brief Examine STATUS_WORD for pgood or unit off faults.
*/
void analyzePgoodFault();
/**
* @brief Determine possible manufacturer-specific faults from bits in
* STATUS_MFR.
*
* The bits in the STATUS_MFR_SPECIFIC command response have "Manufacturer
* Defined" meanings. Determine which faults, if any, are present based on
* the power supply (device driver) type.
*/
void determineMFRFault();
/**
* @brief Examine STATUS_WORD value read for MFRSPECIFIC bit on.
*
* "A manufacturer specific fault or warning has occurred."
*
* If it is on, call the determineMFRFault() helper function to examine the
* value read from STATUS_MFR_SPECIFIC.
*/
void analyzeMFRFault();
/**
* @brief D-Bus path to use for this power supply's inventory status.
**/
std::string inventoryPath;
/**
* @brief The libgpiod object for monitoring PSU presence
*/
std::unique_ptr<GPIOInterfaceBase> presenceGPIO = nullptr;
/** @brief True if the power supply is present. */
bool present = false;
/** @brief Power supply model name. */
std::string modelName;
/** @brief D-Bus match variable used to subscribe to Present property
* changes.
**/
std::unique_ptr<sdbusplus::bus::match_t> presentMatch;
/** @brief D-Bus match variable used to subscribe for Present property
* interface added.
*/
std::unique_ptr<sdbusplus::bus::match_t> presentAddedMatch;
/**
* @brief Pointer to the PMBus interface
*
* Used to read or write to/from PMBus power supply devices.
*/
std::unique_ptr<phosphor::pmbus::PMBusBase> pmbusIntf = nullptr;
/** @brief Stored copy of the firmware version/revision string */
std::string fwVersion;
/**
* @brief The file system path used for binding the device driver.
*/
const std::filesystem::path bindPath;
/* @brief The string to pass in for binding the device driver. */
std::string bindDevice;
/**
* @brief Binds or unbinds the power supply device driver
*
* Called when a presence change is detected to either bind the device
* driver for the power supply when it is installed, or unbind the device
* driver when the power supply is removed.
*
* Writes <device> to <path>/bind (or unbind)
*
* @param present - when true, will bind the device driver
* when false, will unbind the device driver
*/
void bindOrUnbindDriver(bool present);
/**
* @brief Updates the presence status by querying D-Bus
*
* The D-Bus inventory properties for this power supply will be read to
* determine if the power supply is present or not and update this
* object's present member variable to reflect current status.
**/
void updatePresence();
/**
* @brief Updates the power supply presence by reading the GPIO line.
*/
void updatePresenceGPIO();
/**
* @brief Callback for inventory property changes
*
* Process change of Present property for power supply.
*
* This is used if we are watching the D-Bus properties instead of reading
* the GPIO presence line ourselves.
*
* @param[in] msg - Data associated with Present change signal
**/
void inventoryChanged(sdbusplus::message::message& msg);
/**
* @brief Callback for inventory property added.
*
* Process add of the interface with the Present property for power supply.
*
* This is used if we are watching the D-Bus properties instead of reading
* the GPIO presence line ourselves.
*
* @param[in] msg - Data associated with Present add signal
**/
void inventoryAdded(sdbusplus::message::message& msg);
};
} // namespace phosphor::power::psu