Gitiles
Code Review Sign In
gerrit.openbmc.org / openbmc / phosphor-power / ce1aaddda1d926711e31c4c944a75fbd8719b9e0
commitce1aaddda1d926711e31c4c944a75fbd8719b9e0[log] [tgz]
authorShawn McCarney <shawnmm@us.ibm.com>Thu Jun 27 12:59:33 2024 -0500
committerShawn McCarney <shawnmm@us.ibm.com>Thu Jun 27 13:40:11 2024 -0500
tree3fe22fa60cff44be8a16bd346f1c242bf3c331e4
parent16275831b63e2df21eed140b26810f9591b00c35 [diff]
pseq: Update STATUS_VOUT checks in config files

Update the phosphor-power-sequencer JSON configuration files for the
following systems:
* Rainier
* BlueRidge
* Everest
* Fuji

Add STATUS_VOUT checking for voltage rails connected to digital monitors
(DMONs) on the UCD90320 power sequencer.  Checking STATUS_VOUT is more
accurate than other methods in some scenarios.

Also remove STATUS_VOUT and READ_VOUT checking for the PSU rails on
Everest and Fuji.  PMBus information is not available for the PSU rail
due to the way it is configured in the power sequencer device.

Change-Id: If5e630b2c17e0a34e240b1df512a9662a5370289
Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>
4 files changed
tree: 3fe22fa60cff44be8a16bd346f1c242bf3c331e4
  1. cold-redundancy/
  2. example/
  3. org/
  4. phosphor-power-sequencer/
  5. phosphor-power-supply/
  6. phosphor-regulators/
  7. power-sequencer/
  8. power-supply/
  9. services/
  10. subprojects/
  11. test/
  12. tools/
  13. .clang-format
  14. .gitignore
  15. .shellcheck
  16. compatible_system_types_finder.cpp
  17. compatible_system_types_finder.hpp
  18. dbus_interfaces_finder.cpp
  19. dbus_interfaces_finder.hpp
  20. device.hpp
  21. device_monitor.hpp
  22. elog-errors.hpp
  23. file_descriptor.hpp
  24. gpio.cpp
  25. gpio.hpp
  26. LICENSE
  27. meson.build
  28. meson.options
  29. names_values.hpp
  30. OWNERS
  31. pmbus.cpp
  32. pmbus.hpp
  33. README.md
  34. temporary_file.cpp
  35. temporary_file.hpp
  36. temporary_subdirectory.cpp
  37. temporary_subdirectory.hpp
  38. types.hpp
  39. utility.cpp
  40. utility.hpp
README.md

Overview

This repository contains applications for configuring and monitoring devices that deliver power to the system.

  • cold-redundancy: Application that makes power supplies work in Cold Redundancy mode and rotates them at intervals.
  • phosphor-power-sequencer: Applications for configuring and monitoring power sequencer and related devices that support JSON-driven configuration.
  • phosphor-power-supply: Next generation power supply monitoring application.
  • phosphor-regulators: JSON-driven application that configures and monitors voltage regulators.
  • power-sequencer: A power sequencer monitoring application.
  • power-supply: Original power supply monitoring application.
  • tools/power-utils: Power supply utilities.

Build

To build all applications in this repository:

  meson setup build
  ninja -C build

To clean the repository and remove all build output:

  rm -rf build

You can specify meson options to customize the build process. For example, you can specify:

  • Which applications to build and install.
  • Application-specific configuration data, such as power sequencer type.
  • Whether to build tests.

Power Supply Monitor and Util JSON config

Several applications in this repository require a PSU JSON config to run. The JSON config file provides information for:

  • Where to access the pmbus attributes
  • Which attribute file in pmbus maps to which property and interface in D-Bus
  • Which kernel device directory is used on which PSU

There is an example psu.json to describe the necessary configurations.

  • inventoryPMBusAccessType defines the pmbus access type, which tells the service which sysfs type to use to read the attributes. The possible values are:
    • Base: The base dir, e.g. /sys/bus/i2c/devices/3-0069/
    • Hwmon: The hwmon dir, e.g. /sys/bus/i2c/devices/3-0069/hwmon/hwmonX/
    • Debug: The pmbus debug dir, e.g. /sys/kernel/debug/pmbus/hwmonX/
    • DeviceDebug: The device debug dir, e.g. '/sys/kernel/debug/./`
    • HwmonDeviceDebug: The hwmon device debug dir, e.g. /sys/kernel/debug/pmbus/hwmonX/cffps1/
  • fruConfigs defines the mapping between the attribute file and the FRU inventory interface and property. The configuration example below indicates that the service will read part_number attribute file from a directory specified by the above pmbus access type, and assign to PartNumber property in xyz.openbmc_project.Inventory.Decorator.Asset interface.
      "fruConfigs": [
    {
      "propertyName": "PartNumber",
      "fileName": "part_number",
      "interface": "xyz.openbmc_project.Inventory.Decorator.Asset"
    }
  ]
  • psuDevices defines the kernel device dir for each PSU in inventory. The configuration example below indicates that powersupply0's device is located in /sys/bus/i2c/devices/3-0069.
      "psuDevices": {
    "/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0" : "/sys/bus/i2c/devices/3-0069",
  }