commit | d97aa516d69ca8a0d3880af4b1d775e62a6dd5dd | [log] [tgz] |
---|---|---|
author | Shawn McCarney <shawnmm@us.ibm.com> | Thu Mar 24 19:02:32 2022 -0500 |
committer | Shawn McCarney <shawnmm@us.ibm.com> | Thu Mar 24 19:02:32 2022 -0500 |
tree | e41bea977cb1ee8eca0d37b09458a7ddfa88a8dc | |
parent | 33d492f47572a6f396a2e7eda123a4cb81cd9094 [diff] |
regulators: Add rules and devices to Rainier JSON Add rules and devices to the Rainier JSON voltage regulator configuration file. The JSON rule objects define sequences of actions to configure and read sensors from Rainier voltage regulators. The JSON device objects define the regulator devices and what rules should be run to configure and monitor them. Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com> Change-Id: I07210080e67131c157806235baf7be4b7c33f9fd
This repository contains applications for configuring and monitoring devices that deliver power to the system.
To build all applications in this repository:
meson build ninja -C build
To clean the repository and remove all build output:
rm -rf build
You can specify meson options to customize the build process. For example, you can specify:
Several applications in this repository require a PSU JSON config to run. The JSON config file provides information for:
There is an example psu.json to describe the necessary configurations.
inventoryPMBusAccessType
defines the pmbus access type, which tells the service which sysfs type to use to read the attributes. The possible values are:/sys/bus/i2c/devices/3-0069/
/sys/bus/i2c/devices/3-0069/hwmon/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/cffps1/
fruConfigs
defines the mapping between the attribute file and the FRU inventory interface and property. The configuration example below indicates that the service will read part_number
attribute file from a directory specified by the above pmbus access type, and assign to PartNumber
property in xyz.openbmc_project.Inventory.Decorator.Asset
interface."fruConfigs": [ { "propertyName": "PartNumber", "fileName": "part_number", "interface": "xyz.openbmc_project.Inventory.Decorator.Asset" } ]
psuDevices
defines the kernel device dir for each PSU in inventory. The configuration example below indicates that powersupply0
's device is located in /sys/bus/i2c/devices/3-0069
."psuDevices": { "/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0" : "/sys/bus/i2c/devices/3-0069", }