#pragma once

#include "power_supply.hpp"
#include "types.hpp"
#include "utility.hpp"

#include <phosphor-logging/log.hpp>
#include <sdbusplus/bus/match.hpp>
#include <sdbusplus/server/manager.hpp>
#include <sdbusplus/server/object.hpp>
#include <sdeventplus/event.hpp>
#include <sdeventplus/utility/timer.hpp>
#include <xyz/openbmc_project/State/Decorator/PowerSystemInputs/server.hpp>

struct sys_properties
{
    int powerSupplyCount;
    std::vector<uint64_t> inputVoltage;
    bool powerConfigFullLoad;
};

using namespace phosphor::power::psu;
using namespace phosphor::logging;

namespace phosphor::power::manager
{

using PowerSystemInputsInterface = sdbusplus::xyz::openbmc_project::State::
    Decorator::server::PowerSystemInputs;
using PowerSystemInputsObject =
    sdbusplus::server::object_t<PowerSystemInputsInterface>;

// Validation timeout. Allow 30s to detect if new EM interfaces show up in D-Bus
// before performing the validation.
// Previously the timer was set to 10 seconds was too short, it results in
// incorrect errors being logged, but no real consequence of longer timeout.
constexpr auto validationTimeout = std::chrono::seconds(30);

/**
 * @class PowerSystemInputs
 * @brief A concrete implementation for the PowerSystemInputs interface.
 */
class PowerSystemInputs : public PowerSystemInputsObject
{
  public:
    PowerSystemInputs(sdbusplus::bus_t& bus, const std::string& path) :
        PowerSystemInputsObject(bus, path.c_str())
    {}
};

/**
 * @class PSUManager
 *
 * This class will create an object used to manage and monitor a list of power
 * supply devices.
 */
class PSUManager
{
  public:
    PSUManager() = delete;
    ~PSUManager() = default;
    PSUManager(const PSUManager&) = delete;
    PSUManager& operator=(const PSUManager&) = delete;
    PSUManager(PSUManager&&) = delete;
    PSUManager& operator=(PSUManager&&) = delete;

    /**
     * Constructor to read configuration from D-Bus.
     *
     * @param[in] bus - D-Bus bus object
     * @param[in] e - event object
     */
    PSUManager(sdbusplus::bus_t& bus, const sdeventplus::Event& e);

    /**
     * Get PSU properties from D-Bus, use that to build a power supply
     * object.
     *
     * @param[in] properties - A map of property names and values
     *
     */
    void getPSUProperties(util::DbusPropertyMap& properties);

    /**
     * Get PSU configuration from D-Bus
     */
    void getPSUConfiguration();

    /**
     * @brief Initialize the system properties from the Supported Configuration
     *        D-Bus object provided by Entity Manager.
     */
    void getSystemProperties();

    /**
     * Initializes the manager.
     *
     * Get current BMC state, ...
     */
    void initialize();

    /**
     * Starts the timer to start monitoring the list of devices.
     */
    int run()
    {
        return timer->get_event().loop();
    }

    /**
     * Write PMBus ON_OFF_CONFIG
     *
     * This function will be called to cause the PMBus device driver to send the
     * ON_OFF_CONFIG command. Takes one byte of data.
     */
    void onOffConfig(const uint8_t data)
    {
        for (auto& psu : psus)
        {
            psu->onOffConfig(data);
        }
    }

    /**
     * This function will be called in various situations in order to clear
     * any fault status bits that may have been set, in order to start over
     * with a clean state. Presence changes and power state changes will want
     * to clear any faults logged.
     */
    void clearFaults()
    {
        setPowerSupplyError("");
        for (auto& psu : psus)
        {
            psu->clearFaults();
        }
    }

    /**
     * Get the status of Power on.
     */
    bool isPowerOn()
    {
        return powerOn;
    }

  private:
    /**
     * The D-Bus object
     */
    sdbusplus::bus_t& bus;

    /**
     * The timer that runs to periodically check the power supplies.
     */
    std::unique_ptr<
        sdeventplus::utility::Timer<sdeventplus::ClockId::Monotonic>>
        timer;

    /**
     * The timer that performs power supply validation as the entity manager
     * interfaces show up in d-bus.
     */
    std::unique_ptr<
        sdeventplus::utility::Timer<sdeventplus::ClockId::Monotonic>>
        validationTimer;

    /**
     * Let power control/sequencer application know of PSU error(s).
     *
     * @param[in] psuErrorString - string for power supply error
     */
    void setPowerSupplyError(const std::string& psuErrorString);

    /**
     * Create an error
     *
     * @param[in] faultName - 'name' message for the BMC error log entry
     * @param[in,out] additionalData - The AdditionalData property for the error
     */
    void createError(const std::string& faultName,
                     std::map<std::string, std::string>& additionalData);

    /**
     * Analyze the status of each of the power supplies.
     *
     * Log errors for faults, when and where appropriate.
     */
    void analyze();

    /**
     * @brief Analyze the set of the power supplies for a brownout failure. Log
     * error when necessary, clear brownout condition when window has passed.
     */
    void analyzeBrownout();

    /** @brief True if the power is on. */
    bool powerOn = false;

    /** @brief True if power control is in the window between chassis pgood loss
     * and power off. */
    bool powerFaultOccurring = false;

    /** @brief True if an error for a brownout has already been logged. */
    bool brownoutLogged = false;

    /** @brief Used as part of subscribing to power on state changes*/
    std::string powerService;

    /** @brief Used to subscribe to D-Bus power on state changes */
    std::unique_ptr<sdbusplus::bus::match_t> powerOnMatch;

    /** @brief Used to subscribe to D-Bus power supply presence changes */
    std::vector<std::unique_ptr<sdbusplus::bus::match_t>> presenceMatches;

    /** @brief Used to subscribe to Entity Manager interfaces added */
    std::unique_ptr<sdbusplus::bus::match_t> entityManagerIfacesAddedMatch;

    /**
     * @brief Callback for power state property changes
     *
     * Process changes to the powered on state property for the system.
     *
     * @param[in] msg - Data associated with the power state signal
     */
    void powerStateChanged(sdbusplus::message_t& msg);

    /**
     * @brief Callback for inventory property changes
     *
     * Process change of the Present property for power supply.
     *
     * @param[in]  msg - Data associated with the Present change signal
     **/
    void presenceChanged(sdbusplus::message_t& msg);

    /**
     * @brief Callback for entity-manager interface added
     *
     * Process the information from the supported configuration and or IBM CFFPS
     * Connector interface being added.
     *
     * @param[in] msg - Data associated with the interfaces added signal
     */
    void entityManagerIfaceAdded(sdbusplus::message_t& msg);

    /**
     * @brief Adds properties to the inventory.
     *
     * Reads the values from the devices and writes them to the associated
     * power supply D-Bus inventory objects.
     *
     * This needs to be done on startup, and each time the presence state
     * changes.
     */
    void updateInventory()
    {
        for (auto& psu : psus)
        {
            psu->updateInventory();
        }
    }

    /**
     * @brief Helper function to populate the system properties
     *
     * @param[in] properties - A map of property names and values
     */
    void populateSysProperties(const util::DbusPropertyMap& properties);

    /**
     * @brief Update inventory for missing required power supplies
     */
    void updateMissingPSUs();

    /**
     * @brief Perform power supply configuration validation.
     * @details Validates if the existing power supply properties are a
     * supported configuration, and acts on its findings such as logging errors.
     */
    void validateConfig();

    /**
     * @brief Flag to indicate if the validateConfig() function should be run.
     * Set to false once the configuration has been validated to avoid running
     * multiple times due to interfaces added signal. Set to true during power
     * off to trigger the validation on power on.
     */
    bool runValidateConfig = true;

    /**
     * @brief Check that all PSUs have the same model name and that the system
     * has the required number of PSUs present as specified in the Supported
     * Configuration interface.
     *
     * @param[out] additionalData - Contains debug information on why the check
     *             might have failed. Can be used to fill in error logs.
     * @return true if all the required PSUs are present, false otherwise.
     */
    bool hasRequiredPSUs(std::map<std::string, std::string>& additionalData);

    /**
     * @brief Returns the number of PSUs that are required to be present.
     *
     * @return required number of PSUs, or 0 if the number could not be
     *         determined.
     */
    unsigned int getRequiredPSUCount();

    /**
     * @brief Returns whether the specified PSU is required to be present.
     *
     * @param[in] psu - Power supply to check
     * @return true if PSU is required, false otherwise.
     */
    bool isRequiredPSU(const PowerSupply& psu);

    /**
     * @brief Helper function to validate that all PSUs have the same model name
     *
     * @param[out] model - The model name. Empty if there is a mismatch.
     * @param[out] additionalData - If there is a mismatch, it contains debug
     *             information such as the mismatched model name.
     * @return true if all the PSUs have the same model name, false otherwise.
     */
    bool validateModelName(std::string& model,
                           std::map<std::string, std::string>& additionalData);

    /**
     * @brief Set the power-config-full-load GPIO depending on the EM full load
     *        property value.
     */
    void setPowerConfigGPIO();

    /**
     * @brief Map of supported PSU configurations that include the model name
     * and their properties.
     */
    std::map<std::string, sys_properties> supportedConfigs;

    /**
     * @brief The vector for power supplies.
     */
    std::vector<std::unique_ptr<PowerSupply>> psus;

    /**
     * @brief The libgpiod object for setting the power supply config
     */
    std::unique_ptr<GPIOInterfaceBase> powerConfigGPIO = nullptr;

    /**
     * @brief PowerSystemInputs object
     */
    PowerSystemInputs powerSystemInputs;

    /**
     * @brief Implement the ObjectManager for PowerSystemInputs object.
     *
     * Implements the org.freedesktop.DBus.ObjectManager interface used to
     * communicate updates to the PowerSystemInputs object on the
     * /xyz/openbmc_project/power/power_supplies root D-Bus path.
     */
    sdbusplus::server::manager_t objectManager;

    /**
     * @brief Implement the ObjectManager for the input voltage rating.
     *
     * Implements the org.freedesktop.DBus.ObjectManager interface used to
     * communicate updates to the input voltage ratings on the
     * /xyz/openbmc_project/sensors root D-Bus path.
     */
    sdbusplus::server::manager_t sensorsObjManager;

    /**
     * @brief GPIO to toggle to 'sync' power supply input history.
     */
    std::unique_ptr<GPIOInterfaceBase> syncHistoryGPIO = nullptr;

    /**
     * @brief Toggles the GPIO to sync power supply input history readings
     *
     * This GPIO is connected to all supplies.  This will clear the
     * previous readings out of the supplies and restart them both at the
     * same time zero and at record ID 0.  The supplies will return 0
     * bytes of data for the input history command right after this until
     * a new entry shows up.
     *
     * This will cause the code to delete all previous history data and
     * start fresh.
     */
    void syncHistory();

    /**
     * @brief Tells each PSU to set its power supply input
     *        voltage rating D-Bus property.
     */
    inline void setInputVoltageRating()
    {
        for (auto& psu : psus)
        {
            psu->setInputVoltageRating();
        }
    }

    /**
     * @brief Build the device driver name for the power supply.
     *
     * @param[in] i2cbus - i2c bus
     * @param[in] i2caddr - i2c bus address
     */
    void buildDriverName(uint64_t i2cbus, uint64_t i2caddr);

    /**
     * @brief Find PSU with device driver name, then populate the device
     *        driver name to all PSUs (including missing PSUs).
     */
    void populateDriverName();

    /**
     * @brief The device driver name for all power supplies.
     */
    std::string driverName;
};

} // namespace phosphor::power::manager