commit | ff4814381b6c39ec9a235d5633d639586e6e2a57 | [log] [tgz] |
---|---|---|
author | Shawn McCarney <shawnmm@us.ibm.com> | Thu Feb 13 10:38:44 2020 -0600 |
committer | Shawn McCarney <shawnmm@us.ibm.com> | Thu Feb 13 15:21:38 2020 -0600 |
tree | 9a3dfed211f558852b2134d623b8d7a1f0a3d8ee | |
parent | 8f0d14284e2aada592f3a59c26d2a0df02e6e8cf [diff] |
Only build tests if -Dtests=enabled specified A meson build option named 'tests' is defined for this repository. It indicates whether gtest/gmock tests should be built. However, some tests are currently always built even if -Dtests=enabled isn't specified. This causes build errors in some environments where gtest and gmock are not available. Modify meson.build files to only descend into 'test' subdirectories and build test cases if -Dtests=enabled was specified. Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com> Change-Id: Ic0da2326e3d9c273ff76d54b5ac27cbe00d78876
Code for detecting and analyzing power faults on Witherspoon.
To build this package, do the following steps: 1. meson build 2. ninja -C build To clean the repository again run `rm -rf build`.
Several applications in this repository require a PSU JSON config to run. The JSON config file provides information for:
There is an example psu.json to describe the necessary configurations.
inventoryPMBusAccessType
defines the pmbus access type, which tells the service which sysfs type to use to read the attributes. The possible values are:/sys/bus/i2c/devices/3-0069/
/sys/bus/i2c/devices/3-0069/hwmon/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/cffps1/
fruConfigs
defines the mapping between the attribute file and the FRU inventory interface and property. The configuration example below indicates that the service will read part_number
attribute file from a directory specified by the above pmbus access type, and assign to PartNumber
property in xyz.openbmc_project.Inventory.Decorator.Asset
interface."fruConfigs": [ { "propertyName": "PartNumber", "fileName": "part_number", "interface": "xyz.openbmc_project.Inventory.Decorator.Asset" } ]
psuDevices
defines the kernel device dir for each PSU in inventory. The configuration example below indicates that powersupply0
's device is located in /sys/bus/i2c/devices/3-0069
."psuDevices": { "/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0" : "/sys/bus/i2c/devices/3-0069", }