Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 1 | /** |
| 2 | * Copyright © 2020 IBM Corporation |
| 3 | * |
| 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| 5 | * you may not use this file except in compliance with the License. |
| 6 | * You may obtain a copy of the License at |
| 7 | * |
| 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
| 9 | * |
| 10 | * Unless required by applicable law or agreed to in writing, software |
| 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
| 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 13 | * See the License for the specific language governing permissions and |
| 14 | * limitations under the License. |
| 15 | */ |
| 16 | #include "action.hpp" |
| 17 | #include "chassis.hpp" |
| 18 | #include "config_file_parser.hpp" |
| 19 | #include "config_file_parser_error.hpp" |
Bob King | f617f89 | 2020-03-30 19:03:35 +0800 | [diff] [blame] | 20 | #include "i2c_interface.hpp" |
| 21 | #include "i2c_write_bit_action.hpp" |
Bob King | 87ff9d7 | 2020-03-31 14:02:55 +0800 | [diff] [blame] | 22 | #include "i2c_write_byte_action.hpp" |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 23 | #include "pmbus_utils.hpp" |
| 24 | #include "pmbus_write_vout_command_action.hpp" |
| 25 | #include "rule.hpp" |
Shawn McCarney | 80c0b04 | 2020-03-27 12:08:53 -0500 | [diff] [blame] | 26 | #include "tmp_file.hpp" |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 27 | |
Shawn McCarney | 80c0b04 | 2020-03-27 12:08:53 -0500 | [diff] [blame] | 28 | #include <sys/stat.h> // for chmod() |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 29 | |
| 30 | #include <nlohmann/json.hpp> |
| 31 | |
| 32 | #include <cstdint> |
| 33 | #include <cstring> |
| 34 | #include <exception> |
| 35 | #include <filesystem> |
| 36 | #include <fstream> |
| 37 | #include <memory> |
| 38 | #include <optional> |
| 39 | #include <stdexcept> |
| 40 | #include <string> |
| 41 | #include <tuple> |
| 42 | #include <vector> |
| 43 | |
| 44 | #include <gtest/gtest.h> |
| 45 | |
| 46 | using namespace phosphor::power::regulators; |
| 47 | using namespace phosphor::power::regulators::config_file_parser; |
| 48 | using namespace phosphor::power::regulators::config_file_parser::internal; |
| 49 | using json = nlohmann::json; |
| 50 | |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 51 | void writeConfigFile(const std::filesystem::path& pathName, |
| 52 | const std::string& contents) |
| 53 | { |
| 54 | std::ofstream file{pathName}; |
| 55 | file << contents; |
| 56 | } |
| 57 | |
| 58 | void writeConfigFile(const std::filesystem::path& pathName, |
| 59 | const json& contents) |
| 60 | { |
| 61 | std::ofstream file{pathName}; |
| 62 | file << contents; |
| 63 | } |
| 64 | |
| 65 | TEST(ConfigFileParserTests, Parse) |
| 66 | { |
| 67 | // Test where works |
| 68 | { |
| 69 | const json configFileContents = R"( |
| 70 | { |
| 71 | "rules": [ |
| 72 | { |
| 73 | "id": "set_voltage_rule1", |
| 74 | "actions": [ |
| 75 | { "pmbus_write_vout_command": { "volts": 1.03, "format": "linear" } } |
| 76 | ] |
| 77 | }, |
| 78 | { |
| 79 | "id": "set_voltage_rule2", |
| 80 | "actions": [ |
| 81 | { "pmbus_write_vout_command": { "volts": 1.33, "format": "linear" } } |
| 82 | ] |
| 83 | } |
| 84 | ], |
| 85 | "chassis": [ |
| 86 | { "number": 1 }, |
| 87 | { "number": 2 }, |
| 88 | { "number": 3 } |
| 89 | ] |
| 90 | } |
| 91 | )"_json; |
| 92 | |
| 93 | TmpFile configFile; |
| 94 | std::filesystem::path pathName{configFile.getName()}; |
| 95 | writeConfigFile(pathName, configFileContents); |
| 96 | |
| 97 | std::vector<std::unique_ptr<Rule>> rules{}; |
| 98 | std::vector<std::unique_ptr<Chassis>> chassis{}; |
| 99 | std::tie(rules, chassis) = parse(pathName); |
| 100 | |
| 101 | EXPECT_EQ(rules.size(), 2); |
| 102 | EXPECT_EQ(rules[0]->getID(), "set_voltage_rule1"); |
| 103 | EXPECT_EQ(rules[1]->getID(), "set_voltage_rule2"); |
| 104 | |
| 105 | // TODO: Not implemented yet |
| 106 | // EXPECT_EQ(chassis.size(), 3); |
| 107 | // EXPECT_EQ(chassis[0]->getNumber(), 1); |
| 108 | // EXPECT_EQ(chassis[1]->getNumber(), 2); |
| 109 | // EXPECT_EQ(chassis[2]->getNumber(), 3); |
| 110 | } |
| 111 | |
| 112 | // Test where fails: File does not exist |
| 113 | try |
| 114 | { |
| 115 | std::filesystem::path pathName{"/tmp/non_existent_file"}; |
| 116 | parse(pathName); |
| 117 | ADD_FAILURE() << "Should not have reached this line."; |
| 118 | } |
| 119 | catch (const ConfigFileParserError& e) |
| 120 | { |
| 121 | // Expected exception; what() message will vary |
| 122 | } |
| 123 | |
| 124 | // Test where fails: File is not readable |
| 125 | try |
| 126 | { |
| 127 | const json configFileContents = R"( |
| 128 | { |
| 129 | "chassis": [ { "number": 1 } ] |
| 130 | } |
| 131 | )"_json; |
| 132 | |
| 133 | TmpFile configFile; |
| 134 | std::filesystem::path pathName{configFile.getName()}; |
| 135 | writeConfigFile(pathName, configFileContents); |
| 136 | |
| 137 | chmod(pathName.c_str(), 0222); |
| 138 | |
| 139 | parse(pathName); |
| 140 | ADD_FAILURE() << "Should not have reached this line."; |
| 141 | } |
| 142 | catch (const ConfigFileParserError& e) |
| 143 | { |
| 144 | // Expected exception; what() message will vary |
| 145 | } |
| 146 | |
| 147 | // Test where fails: File is not valid JSON |
| 148 | try |
| 149 | { |
| 150 | const std::string configFileContents = "] foo ["; |
| 151 | |
| 152 | TmpFile configFile; |
| 153 | std::filesystem::path pathName{configFile.getName()}; |
| 154 | writeConfigFile(pathName, configFileContents); |
| 155 | |
| 156 | parse(pathName); |
| 157 | ADD_FAILURE() << "Should not have reached this line."; |
| 158 | } |
| 159 | catch (const ConfigFileParserError& e) |
| 160 | { |
| 161 | // Expected exception; what() message will vary |
| 162 | } |
| 163 | |
| 164 | // Test where fails: Error when parsing JSON elements |
| 165 | try |
| 166 | { |
| 167 | const json configFileContents = R"( { "foo": "bar" } )"_json; |
| 168 | |
| 169 | TmpFile configFile; |
| 170 | std::filesystem::path pathName{configFile.getName()}; |
| 171 | writeConfigFile(pathName, configFileContents); |
| 172 | |
| 173 | parse(pathName); |
| 174 | ADD_FAILURE() << "Should not have reached this line."; |
| 175 | } |
| 176 | catch (const ConfigFileParserError& e) |
| 177 | { |
| 178 | // Expected exception; what() message will vary |
| 179 | } |
| 180 | } |
| 181 | |
| 182 | TEST(ConfigFileParserTests, GetRequiredProperty) |
| 183 | { |
| 184 | // Test where property exists |
| 185 | { |
| 186 | const json element = R"( { "format": "linear" } )"_json; |
| 187 | const json& propertyElement = getRequiredProperty(element, "format"); |
| 188 | EXPECT_EQ(propertyElement.get<std::string>(), "linear"); |
| 189 | } |
| 190 | |
| 191 | // Test where property does not exist |
| 192 | try |
| 193 | { |
| 194 | const json element = R"( { "volts": 1.03 } )"_json; |
| 195 | getRequiredProperty(element, "format"); |
| 196 | ADD_FAILURE() << "Should not have reached this line."; |
| 197 | } |
| 198 | catch (const std::invalid_argument& e) |
| 199 | { |
| 200 | EXPECT_STREQ(e.what(), "Required property missing: format"); |
| 201 | } |
| 202 | } |
| 203 | |
| 204 | TEST(ConfigFileParserTests, ParseAction) |
| 205 | { |
| 206 | // Test where works: comments property specified |
| 207 | { |
| 208 | const json element = R"( |
| 209 | { |
| 210 | "comments": [ "Set output voltage." ], |
| 211 | "pmbus_write_vout_command": { |
| 212 | "format": "linear" |
| 213 | } |
| 214 | } |
| 215 | )"_json; |
| 216 | std::unique_ptr<Action> action = parseAction(element); |
| 217 | EXPECT_NE(action.get(), nullptr); |
| 218 | } |
| 219 | |
| 220 | // Test where works: comments property not specified |
| 221 | { |
| 222 | const json element = R"( |
| 223 | { |
| 224 | "pmbus_write_vout_command": { |
| 225 | "format": "linear" |
| 226 | } |
| 227 | } |
| 228 | )"_json; |
| 229 | std::unique_ptr<Action> action = parseAction(element); |
| 230 | EXPECT_NE(action.get(), nullptr); |
| 231 | } |
| 232 | |
| 233 | // Test where works: and action type specified |
| 234 | // TODO: Not implemented yet |
| 235 | |
| 236 | // Test where works: compare_presence action type specified |
| 237 | // TODO: Not implemented yet |
| 238 | |
| 239 | // Test where works: compare_vpd action type specified |
| 240 | // TODO: Not implemented yet |
| 241 | |
| 242 | // Test where works: i2c_compare_bit action type specified |
| 243 | // TODO: Not implemented yet |
| 244 | |
| 245 | // Test where works: i2c_compare_byte action type specified |
| 246 | // TODO: Not implemented yet |
| 247 | |
| 248 | // Test where works: i2c_compare_bytes action type specified |
| 249 | // TODO: Not implemented yet |
| 250 | |
| 251 | // Test where works: i2c_write_bit action type specified |
Bob King | f617f89 | 2020-03-30 19:03:35 +0800 | [diff] [blame] | 252 | { |
| 253 | const json element = R"( |
| 254 | { |
| 255 | "i2c_write_bit": { |
| 256 | "register": "0xA0", |
| 257 | "position": 3, |
| 258 | "value": 0 |
| 259 | } |
| 260 | } |
| 261 | )"_json; |
| 262 | std::unique_ptr<Action> action = parseAction(element); |
| 263 | EXPECT_NE(action.get(), nullptr); |
| 264 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 265 | |
| 266 | // Test where works: i2c_write_byte action type specified |
Bob King | 87ff9d7 | 2020-03-31 14:02:55 +0800 | [diff] [blame] | 267 | { |
| 268 | const json element = R"( |
| 269 | { |
| 270 | "i2c_write_byte": { |
| 271 | "register": "0x0A", |
| 272 | "value": "0xCC" |
| 273 | } |
| 274 | } |
| 275 | )"_json; |
| 276 | std::unique_ptr<Action> action = parseAction(element); |
| 277 | EXPECT_NE(action.get(), nullptr); |
| 278 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 279 | |
| 280 | // Test where works: i2c_write_bytes action type specified |
| 281 | // TODO: Not implemented yet |
| 282 | |
| 283 | // Test where works: if action type specified |
| 284 | // TODO: Not implemented yet |
| 285 | |
| 286 | // Test where works: not action type specified |
| 287 | // TODO: Not implemented yet |
| 288 | |
| 289 | // Test where works: or action type specified |
| 290 | // TODO: Not implemented yet |
| 291 | |
| 292 | // Test where works: pmbus_read_sensor action type specified |
| 293 | // TODO: Not implemented yet |
| 294 | |
| 295 | // Test where works: pmbus_write_vout_command action type specified |
| 296 | { |
| 297 | const json element = R"( |
| 298 | { |
| 299 | "pmbus_write_vout_command": { |
| 300 | "format": "linear" |
| 301 | } |
| 302 | } |
| 303 | )"_json; |
| 304 | std::unique_ptr<Action> action = parseAction(element); |
| 305 | EXPECT_NE(action.get(), nullptr); |
| 306 | } |
| 307 | |
| 308 | // Test where works: run_rule action type specified |
| 309 | // TODO: Not implemented yet |
| 310 | |
| 311 | // Test where works: set_device action type specified |
| 312 | // TODO: Not implemented yet |
| 313 | |
| 314 | // Test where fails: Element is not an object |
| 315 | try |
| 316 | { |
| 317 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 318 | parseAction(element); |
| 319 | ADD_FAILURE() << "Should not have reached this line."; |
| 320 | } |
| 321 | catch (const std::invalid_argument& e) |
| 322 | { |
| 323 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 324 | } |
| 325 | |
| 326 | // Test where fails: No action type specified |
| 327 | try |
| 328 | { |
| 329 | const json element = R"( |
| 330 | { |
| 331 | "comments": [ "Set output voltage." ] |
| 332 | } |
| 333 | )"_json; |
| 334 | parseAction(element); |
| 335 | ADD_FAILURE() << "Should not have reached this line."; |
| 336 | } |
| 337 | catch (const std::invalid_argument& e) |
| 338 | { |
| 339 | EXPECT_STREQ(e.what(), "Required action type property missing"); |
| 340 | } |
| 341 | |
| 342 | // Test where fails: Multiple action types specified |
| 343 | // TODO: Implement after another action type is supported |
| 344 | |
| 345 | // Test where fails: Invalid property specified |
| 346 | try |
| 347 | { |
| 348 | const json element = R"( |
| 349 | { |
| 350 | "remarks": [ "Set output voltage." ], |
| 351 | "pmbus_write_vout_command": { |
| 352 | "format": "linear" |
| 353 | } |
| 354 | } |
| 355 | )"_json; |
| 356 | parseAction(element); |
| 357 | ADD_FAILURE() << "Should not have reached this line."; |
| 358 | } |
| 359 | catch (const std::invalid_argument& e) |
| 360 | { |
| 361 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 362 | } |
| 363 | } |
| 364 | |
| 365 | TEST(ConfigFileParserTests, ParseActionArray) |
| 366 | { |
| 367 | // Test where works |
| 368 | { |
| 369 | const json element = R"( |
| 370 | [ |
| 371 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } }, |
| 372 | { "pmbus_write_vout_command": { "volts": 1.03, "format": "linear" } } |
| 373 | ] |
| 374 | )"_json; |
| 375 | std::vector<std::unique_ptr<Action>> actions = |
| 376 | parseActionArray(element); |
| 377 | EXPECT_EQ(actions.size(), 2); |
| 378 | } |
| 379 | |
| 380 | // Test where fails: Element is not an array |
| 381 | try |
| 382 | { |
| 383 | const json element = R"( |
| 384 | { |
| 385 | "foo": "bar" |
| 386 | } |
| 387 | )"_json; |
| 388 | parseActionArray(element); |
| 389 | ADD_FAILURE() << "Should not have reached this line."; |
| 390 | } |
| 391 | catch (const std::invalid_argument& e) |
| 392 | { |
| 393 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 394 | } |
| 395 | } |
| 396 | |
Bob King | f617f89 | 2020-03-30 19:03:35 +0800 | [diff] [blame] | 397 | TEST(ConfigFileParserTests, ParseBitPosition) |
| 398 | { |
| 399 | // Test where works: 0 |
| 400 | { |
| 401 | const json element = R"( 0 )"_json; |
| 402 | uint8_t value = parseBitPosition(element); |
| 403 | EXPECT_EQ(value, 0); |
| 404 | } |
| 405 | |
| 406 | // Test where works: 7 |
| 407 | { |
| 408 | const json element = R"( 7 )"_json; |
| 409 | uint8_t value = parseBitPosition(element); |
| 410 | EXPECT_EQ(value, 7); |
| 411 | } |
| 412 | |
| 413 | // Test where fails: Element is not an integer |
| 414 | try |
| 415 | { |
| 416 | const json element = R"( 1.03 )"_json; |
| 417 | parseBitPosition(element); |
| 418 | ADD_FAILURE() << "Should not have reached this line."; |
| 419 | } |
| 420 | catch (const std::invalid_argument& e) |
| 421 | { |
| 422 | EXPECT_STREQ(e.what(), "Element is not an integer"); |
| 423 | } |
| 424 | |
| 425 | // Test where fails: Value < 0 |
| 426 | try |
| 427 | { |
| 428 | const json element = R"( -1 )"_json; |
| 429 | parseBitPosition(element); |
| 430 | ADD_FAILURE() << "Should not have reached this line."; |
| 431 | } |
| 432 | catch (const std::invalid_argument& e) |
| 433 | { |
| 434 | EXPECT_STREQ(e.what(), "Element is not a bit position"); |
| 435 | } |
| 436 | |
| 437 | // Test where fails: Value > 7 |
| 438 | try |
| 439 | { |
| 440 | const json element = R"( 8 )"_json; |
| 441 | parseBitPosition(element); |
| 442 | ADD_FAILURE() << "Should not have reached this line."; |
| 443 | } |
| 444 | catch (const std::invalid_argument& e) |
| 445 | { |
| 446 | EXPECT_STREQ(e.what(), "Element is not a bit position"); |
| 447 | } |
| 448 | } |
| 449 | |
| 450 | TEST(ConfigFileParserTests, ParseBitValue) |
| 451 | { |
| 452 | // Test where works: 0 |
| 453 | { |
| 454 | const json element = R"( 0 )"_json; |
| 455 | uint8_t value = parseBitValue(element); |
| 456 | EXPECT_EQ(value, 0); |
| 457 | } |
| 458 | |
| 459 | // Test where works: 1 |
| 460 | { |
| 461 | const json element = R"( 1 )"_json; |
| 462 | uint8_t value = parseBitValue(element); |
| 463 | EXPECT_EQ(value, 1); |
| 464 | } |
| 465 | |
| 466 | // Test where fails: Element is not an integer |
| 467 | try |
| 468 | { |
| 469 | const json element = R"( 0.5 )"_json; |
| 470 | parseBitValue(element); |
| 471 | ADD_FAILURE() << "Should not have reached this line."; |
| 472 | } |
| 473 | catch (const std::invalid_argument& e) |
| 474 | { |
| 475 | EXPECT_STREQ(e.what(), "Element is not an integer"); |
| 476 | } |
| 477 | |
| 478 | // Test where fails: Value < 0 |
| 479 | try |
| 480 | { |
| 481 | const json element = R"( -1 )"_json; |
| 482 | parseBitValue(element); |
| 483 | ADD_FAILURE() << "Should not have reached this line."; |
| 484 | } |
| 485 | catch (const std::invalid_argument& e) |
| 486 | { |
| 487 | EXPECT_STREQ(e.what(), "Element is not a bit value"); |
| 488 | } |
| 489 | |
| 490 | // Test where fails: Value > 1 |
| 491 | try |
| 492 | { |
| 493 | const json element = R"( 2 )"_json; |
| 494 | parseBitValue(element); |
| 495 | ADD_FAILURE() << "Should not have reached this line."; |
| 496 | } |
| 497 | catch (const std::invalid_argument& e) |
| 498 | { |
| 499 | EXPECT_STREQ(e.what(), "Element is not a bit value"); |
| 500 | } |
| 501 | } |
| 502 | |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 503 | TEST(ConfigFileParserTests, ParseBoolean) |
| 504 | { |
| 505 | // Test where works: true |
| 506 | { |
| 507 | const json element = R"( true )"_json; |
| 508 | bool value = parseBoolean(element); |
| 509 | EXPECT_EQ(value, true); |
| 510 | } |
| 511 | |
| 512 | // Test where works: false |
| 513 | { |
| 514 | const json element = R"( false )"_json; |
| 515 | bool value = parseBoolean(element); |
| 516 | EXPECT_EQ(value, false); |
| 517 | } |
| 518 | |
| 519 | // Test where fails: Element is not a boolean |
| 520 | try |
| 521 | { |
| 522 | const json element = R"( 1 )"_json; |
| 523 | parseBoolean(element); |
| 524 | ADD_FAILURE() << "Should not have reached this line."; |
| 525 | } |
| 526 | catch (const std::invalid_argument& e) |
| 527 | { |
| 528 | EXPECT_STREQ(e.what(), "Element is not a boolean"); |
| 529 | } |
| 530 | } |
| 531 | |
| 532 | TEST(ConfigFileParserTests, ParseChassisArray) |
| 533 | { |
| 534 | // TODO: Not implemented yet |
| 535 | } |
| 536 | |
| 537 | TEST(ConfigFileParserTests, ParseDouble) |
| 538 | { |
| 539 | // Test where works: floating point value |
| 540 | { |
| 541 | const json element = R"( 1.03 )"_json; |
| 542 | double value = parseDouble(element); |
| 543 | EXPECT_EQ(value, 1.03); |
| 544 | } |
| 545 | |
| 546 | // Test where works: integer value |
| 547 | { |
| 548 | const json element = R"( 24 )"_json; |
| 549 | double value = parseDouble(element); |
| 550 | EXPECT_EQ(value, 24.0); |
| 551 | } |
| 552 | |
| 553 | // Test where fails: Element is not a number |
| 554 | try |
| 555 | { |
| 556 | const json element = R"( true )"_json; |
| 557 | parseDouble(element); |
| 558 | ADD_FAILURE() << "Should not have reached this line."; |
| 559 | } |
| 560 | catch (const std::invalid_argument& e) |
| 561 | { |
| 562 | EXPECT_STREQ(e.what(), "Element is not a number"); |
| 563 | } |
| 564 | } |
| 565 | |
Bob King | f617f89 | 2020-03-30 19:03:35 +0800 | [diff] [blame] | 566 | TEST(ConfigFileParserTests, ParseI2CWriteBit) |
| 567 | { |
| 568 | // Test where works |
| 569 | { |
| 570 | const json element = R"( |
| 571 | { |
| 572 | "register": "0xA0", |
| 573 | "position": 3, |
| 574 | "value": 0 |
| 575 | } |
| 576 | )"_json; |
| 577 | std::unique_ptr<I2CWriteBitAction> action = parseI2CWriteBit(element); |
| 578 | EXPECT_EQ(action->getRegister(), 0xA0); |
| 579 | EXPECT_EQ(action->getPosition(), 3); |
| 580 | EXPECT_EQ(action->getValue(), 0); |
| 581 | } |
| 582 | |
| 583 | // Test where fails: Invalid property specified |
| 584 | try |
| 585 | { |
| 586 | const json element = R"( |
| 587 | { |
| 588 | "register": "0xA0", |
| 589 | "position": 3, |
| 590 | "value": 0, |
| 591 | "foo": 3 |
| 592 | } |
| 593 | )"_json; |
| 594 | parseI2CWriteBit(element); |
| 595 | ADD_FAILURE() << "Should not have reached this line."; |
| 596 | } |
| 597 | catch (const std::invalid_argument& e) |
| 598 | { |
| 599 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 600 | } |
| 601 | |
| 602 | // Test where fails: Element is not an object |
| 603 | try |
| 604 | { |
| 605 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 606 | parseI2CWriteBit(element); |
| 607 | ADD_FAILURE() << "Should not have reached this line."; |
| 608 | } |
| 609 | catch (const std::invalid_argument& e) |
| 610 | { |
| 611 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 612 | } |
| 613 | |
| 614 | // Test where fails: register value is invalid |
| 615 | try |
| 616 | { |
| 617 | const json element = R"( |
| 618 | { |
| 619 | "register": "0xAG", |
| 620 | "position": 3, |
| 621 | "value": 0 |
| 622 | } |
| 623 | )"_json; |
| 624 | parseI2CWriteBit(element); |
| 625 | ADD_FAILURE() << "Should not have reached this line."; |
| 626 | } |
| 627 | catch (const std::invalid_argument& e) |
| 628 | { |
| 629 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 630 | } |
| 631 | |
| 632 | // Test where fails: position value is invalid |
| 633 | try |
| 634 | { |
| 635 | const json element = R"( |
| 636 | { |
| 637 | "register": "0xA0", |
| 638 | "position": 8, |
| 639 | "value": 0 |
| 640 | } |
| 641 | )"_json; |
| 642 | parseI2CWriteBit(element); |
| 643 | ADD_FAILURE() << "Should not have reached this line."; |
| 644 | } |
| 645 | catch (const std::invalid_argument& e) |
| 646 | { |
| 647 | EXPECT_STREQ(e.what(), "Element is not a bit position"); |
| 648 | } |
| 649 | |
| 650 | // Test where fails: value value is invalid |
| 651 | try |
| 652 | { |
| 653 | const json element = R"( |
| 654 | { |
| 655 | "register": "0xA0", |
| 656 | "position": 3, |
| 657 | "value": 2 |
| 658 | } |
| 659 | )"_json; |
| 660 | parseI2CWriteBit(element); |
| 661 | ADD_FAILURE() << "Should not have reached this line."; |
| 662 | } |
| 663 | catch (const std::invalid_argument& e) |
| 664 | { |
| 665 | EXPECT_STREQ(e.what(), "Element is not a bit value"); |
| 666 | } |
| 667 | |
| 668 | // Test where fails: Required register property not specified |
| 669 | try |
| 670 | { |
| 671 | const json element = R"( |
| 672 | { |
| 673 | "position": 3, |
| 674 | "value": 0 |
| 675 | } |
| 676 | )"_json; |
| 677 | parseI2CWriteBit(element); |
| 678 | ADD_FAILURE() << "Should not have reached this line."; |
| 679 | } |
| 680 | catch (const std::invalid_argument& e) |
| 681 | { |
| 682 | EXPECT_STREQ(e.what(), "Required property missing: register"); |
| 683 | } |
| 684 | |
| 685 | // Test where fails: Required position property not specified |
| 686 | try |
| 687 | { |
| 688 | const json element = R"( |
| 689 | { |
| 690 | "register": "0xA0", |
| 691 | "value": 0 |
| 692 | } |
| 693 | )"_json; |
| 694 | parseI2CWriteBit(element); |
| 695 | ADD_FAILURE() << "Should not have reached this line."; |
| 696 | } |
| 697 | catch (const std::invalid_argument& e) |
| 698 | { |
| 699 | EXPECT_STREQ(e.what(), "Required property missing: position"); |
| 700 | } |
| 701 | |
| 702 | // Test where fails: Required value property not specified |
| 703 | try |
| 704 | { |
| 705 | const json element = R"( |
| 706 | { |
| 707 | "register": "0xA0", |
| 708 | "position": 3 |
| 709 | } |
| 710 | )"_json; |
| 711 | parseI2CWriteBit(element); |
| 712 | ADD_FAILURE() << "Should not have reached this line."; |
| 713 | } |
| 714 | catch (const std::invalid_argument& e) |
| 715 | { |
| 716 | EXPECT_STREQ(e.what(), "Required property missing: value"); |
| 717 | } |
| 718 | } |
| 719 | |
Bob King | 87ff9d7 | 2020-03-31 14:02:55 +0800 | [diff] [blame] | 720 | TEST(ConfigFileParserTests, ParseI2CWriteByte) |
| 721 | { |
| 722 | // Test where works: Only required properties specified |
| 723 | { |
| 724 | const json element = R"( |
| 725 | { |
| 726 | "register": "0x0A", |
| 727 | "value": "0xCC" |
| 728 | } |
| 729 | )"_json; |
| 730 | std::unique_ptr<I2CWriteByteAction> action = parseI2CWriteByte(element); |
| 731 | EXPECT_EQ(action->getRegister(), 0x0A); |
| 732 | EXPECT_EQ(action->getValue(), 0xCC); |
| 733 | EXPECT_EQ(action->getMask(), 0xFF); |
| 734 | } |
| 735 | |
| 736 | // Test where works: All properties specified |
| 737 | { |
| 738 | const json element = R"( |
| 739 | { |
| 740 | "register": "0x0A", |
| 741 | "value": "0xCC", |
| 742 | "mask": "0xF7" |
| 743 | } |
| 744 | )"_json; |
| 745 | std::unique_ptr<I2CWriteByteAction> action = parseI2CWriteByte(element); |
| 746 | EXPECT_EQ(action->getRegister(), 0x0A); |
| 747 | EXPECT_EQ(action->getValue(), 0xCC); |
| 748 | EXPECT_EQ(action->getMask(), 0xF7); |
| 749 | } |
| 750 | |
| 751 | // Test where fails: Element is not an object |
| 752 | try |
| 753 | { |
| 754 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 755 | parseI2CWriteByte(element); |
| 756 | ADD_FAILURE() << "Should not have reached this line."; |
| 757 | } |
| 758 | catch (const std::invalid_argument& e) |
| 759 | { |
| 760 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 761 | } |
| 762 | |
| 763 | // Test where fails: Invalid property specified |
| 764 | try |
| 765 | { |
| 766 | const json element = R"( |
| 767 | { |
| 768 | "register": "0x0A", |
| 769 | "value": "0xCC", |
| 770 | "mask": "0xF7", |
| 771 | "foo": 1 |
| 772 | } |
| 773 | )"_json; |
| 774 | parseI2CWriteByte(element); |
| 775 | ADD_FAILURE() << "Should not have reached this line."; |
| 776 | } |
| 777 | catch (const std::invalid_argument& e) |
| 778 | { |
| 779 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 780 | } |
| 781 | |
| 782 | // Test where fails: register value is invalid |
| 783 | try |
| 784 | { |
| 785 | const json element = R"( |
| 786 | { |
| 787 | "register": "0x0Z", |
| 788 | "value": "0xCC", |
| 789 | "mask": "0xF7" |
| 790 | } |
| 791 | )"_json; |
| 792 | parseI2CWriteByte(element); |
| 793 | ADD_FAILURE() << "Should not have reached this line."; |
| 794 | } |
| 795 | catch (const std::invalid_argument& e) |
| 796 | { |
| 797 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 798 | } |
| 799 | |
| 800 | // Test where fails: value value is invalid |
| 801 | try |
| 802 | { |
| 803 | const json element = R"( |
| 804 | { |
| 805 | "register": "0x0A", |
| 806 | "value": "0xCCC", |
| 807 | "mask": "0xF7" |
| 808 | } |
| 809 | )"_json; |
| 810 | parseI2CWriteByte(element); |
| 811 | ADD_FAILURE() << "Should not have reached this line."; |
| 812 | } |
| 813 | catch (const std::invalid_argument& e) |
| 814 | { |
| 815 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 816 | } |
| 817 | |
| 818 | // Test where fails: mask value is invalid |
| 819 | try |
| 820 | { |
| 821 | const json element = R"( |
| 822 | { |
| 823 | "register": "0x0A", |
| 824 | "value": "0xCC", |
| 825 | "mask": "F7" |
| 826 | } |
| 827 | )"_json; |
| 828 | parseI2CWriteByte(element); |
| 829 | ADD_FAILURE() << "Should not have reached this line."; |
| 830 | } |
| 831 | catch (const std::invalid_argument& e) |
| 832 | { |
| 833 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 834 | } |
| 835 | |
| 836 | // Test where fails: Required register property not specified |
| 837 | try |
| 838 | { |
| 839 | const json element = R"( |
| 840 | { |
| 841 | "value": "0xCC", |
| 842 | "mask": "0xF7" |
| 843 | } |
| 844 | )"_json; |
| 845 | parseI2CWriteByte(element); |
| 846 | ADD_FAILURE() << "Should not have reached this line."; |
| 847 | } |
| 848 | catch (const std::invalid_argument& e) |
| 849 | { |
| 850 | EXPECT_STREQ(e.what(), "Required property missing: register"); |
| 851 | } |
| 852 | |
| 853 | // Test where fails: Required value property not specified |
| 854 | try |
| 855 | { |
| 856 | const json element = R"( |
| 857 | { |
| 858 | "register": "0x0A", |
| 859 | "mask": "0xF7" |
| 860 | } |
| 861 | )"_json; |
| 862 | parseI2CWriteByte(element); |
| 863 | ADD_FAILURE() << "Should not have reached this line."; |
| 864 | } |
| 865 | catch (const std::invalid_argument& e) |
| 866 | { |
| 867 | EXPECT_STREQ(e.what(), "Required property missing: value"); |
| 868 | } |
| 869 | } |
| 870 | |
| 871 | TEST(ConfigFileParserTests, ParseInt8) |
| 872 | { |
| 873 | // Test where works: INT8_MIN |
| 874 | { |
| 875 | const json element = R"( -128 )"_json; |
| 876 | int8_t value = parseInt8(element); |
| 877 | EXPECT_EQ(value, -128); |
| 878 | } |
| 879 | |
| 880 | // Test where works: INT8_MAX |
| 881 | { |
| 882 | const json element = R"( 127 )"_json; |
| 883 | int8_t value = parseInt8(element); |
| 884 | EXPECT_EQ(value, 127); |
| 885 | } |
| 886 | |
| 887 | // Test where fails: Element is not an integer |
| 888 | try |
| 889 | { |
| 890 | const json element = R"( 1.03 )"_json; |
| 891 | parseInt8(element); |
| 892 | ADD_FAILURE() << "Should not have reached this line."; |
| 893 | } |
| 894 | catch (const std::invalid_argument& e) |
| 895 | { |
| 896 | EXPECT_STREQ(e.what(), "Element is not an integer"); |
| 897 | } |
| 898 | |
| 899 | // Test where fails: Value < INT8_MIN |
| 900 | try |
| 901 | { |
| 902 | const json element = R"( -129 )"_json; |
| 903 | parseInt8(element); |
| 904 | ADD_FAILURE() << "Should not have reached this line."; |
| 905 | } |
| 906 | catch (const std::invalid_argument& e) |
| 907 | { |
| 908 | EXPECT_STREQ(e.what(), "Element is not an 8-bit signed integer"); |
| 909 | } |
| 910 | |
| 911 | // Test where fails: Value > INT8_MAX |
| 912 | try |
| 913 | { |
| 914 | const json element = R"( 128 )"_json; |
| 915 | parseInt8(element); |
| 916 | ADD_FAILURE() << "Should not have reached this line."; |
| 917 | } |
| 918 | catch (const std::invalid_argument& e) |
| 919 | { |
| 920 | EXPECT_STREQ(e.what(), "Element is not an 8-bit signed integer"); |
| 921 | } |
| 922 | } |
| 923 | |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 924 | TEST(ConfigFileParserTests, ParsePMBusWriteVoutCommand) |
| 925 | { |
| 926 | // Test where works: Only required properties specified |
| 927 | { |
| 928 | const json element = R"( |
| 929 | { |
| 930 | "format": "linear" |
| 931 | } |
| 932 | )"_json; |
| 933 | std::unique_ptr<PMBusWriteVoutCommandAction> action = |
| 934 | parsePMBusWriteVoutCommand(element); |
| 935 | EXPECT_EQ(action->getVolts().has_value(), false); |
| 936 | EXPECT_EQ(action->getFormat(), pmbus_utils::VoutDataFormat::linear); |
| 937 | EXPECT_EQ(action->getExponent().has_value(), false); |
| 938 | EXPECT_EQ(action->isVerified(), false); |
| 939 | } |
| 940 | |
| 941 | // Test where works: All properties specified |
| 942 | { |
| 943 | const json element = R"( |
| 944 | { |
| 945 | "volts": 1.03, |
| 946 | "format": "linear", |
| 947 | "exponent": -8, |
| 948 | "is_verified": true |
| 949 | } |
| 950 | )"_json; |
| 951 | std::unique_ptr<PMBusWriteVoutCommandAction> action = |
| 952 | parsePMBusWriteVoutCommand(element); |
| 953 | EXPECT_EQ(action->getVolts().has_value(), true); |
| 954 | EXPECT_EQ(action->getVolts().value(), 1.03); |
| 955 | EXPECT_EQ(action->getFormat(), pmbus_utils::VoutDataFormat::linear); |
| 956 | EXPECT_EQ(action->getExponent().has_value(), true); |
| 957 | EXPECT_EQ(action->getExponent().value(), -8); |
| 958 | EXPECT_EQ(action->isVerified(), true); |
| 959 | } |
| 960 | |
| 961 | // Test where fails: Element is not an object |
| 962 | try |
| 963 | { |
| 964 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 965 | parsePMBusWriteVoutCommand(element); |
| 966 | ADD_FAILURE() << "Should not have reached this line."; |
| 967 | } |
| 968 | catch (const std::invalid_argument& e) |
| 969 | { |
| 970 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 971 | } |
| 972 | |
| 973 | // Test where fails: volts value is invalid |
| 974 | try |
| 975 | { |
| 976 | const json element = R"( |
| 977 | { |
| 978 | "volts": "foo", |
| 979 | "format": "linear" |
| 980 | } |
| 981 | )"_json; |
| 982 | parsePMBusWriteVoutCommand(element); |
| 983 | ADD_FAILURE() << "Should not have reached this line."; |
| 984 | } |
| 985 | catch (const std::invalid_argument& e) |
| 986 | { |
| 987 | EXPECT_STREQ(e.what(), "Element is not a number"); |
| 988 | } |
| 989 | |
| 990 | // Test where fails: Required format property not specified |
| 991 | try |
| 992 | { |
| 993 | const json element = R"( |
| 994 | { |
| 995 | "volts": 1.03, |
| 996 | "is_verified": true |
| 997 | } |
| 998 | )"_json; |
| 999 | parsePMBusWriteVoutCommand(element); |
| 1000 | ADD_FAILURE() << "Should not have reached this line."; |
| 1001 | } |
| 1002 | catch (const std::invalid_argument& e) |
| 1003 | { |
| 1004 | EXPECT_STREQ(e.what(), "Required property missing: format"); |
| 1005 | } |
| 1006 | |
| 1007 | // Test where fails: format value is invalid |
| 1008 | try |
| 1009 | { |
| 1010 | const json element = R"( |
| 1011 | { |
| 1012 | "format": "linear_11" |
| 1013 | } |
| 1014 | )"_json; |
| 1015 | parsePMBusWriteVoutCommand(element); |
| 1016 | ADD_FAILURE() << "Should not have reached this line."; |
| 1017 | } |
| 1018 | catch (const std::invalid_argument& e) |
| 1019 | { |
| 1020 | EXPECT_STREQ(e.what(), "Invalid format value: linear_11"); |
| 1021 | } |
| 1022 | |
| 1023 | // Test where fails: exponent value is invalid |
| 1024 | try |
| 1025 | { |
| 1026 | const json element = R"( |
| 1027 | { |
| 1028 | "format": "linear", |
| 1029 | "exponent": 1.3 |
| 1030 | } |
| 1031 | )"_json; |
| 1032 | parsePMBusWriteVoutCommand(element); |
| 1033 | ADD_FAILURE() << "Should not have reached this line."; |
| 1034 | } |
| 1035 | catch (const std::invalid_argument& e) |
| 1036 | { |
| 1037 | EXPECT_STREQ(e.what(), "Element is not an integer"); |
| 1038 | } |
| 1039 | |
| 1040 | // Test where fails: is_verified value is invalid |
| 1041 | try |
| 1042 | { |
| 1043 | const json element = R"( |
| 1044 | { |
| 1045 | "format": "linear", |
| 1046 | "is_verified": "true" |
| 1047 | } |
| 1048 | )"_json; |
| 1049 | parsePMBusWriteVoutCommand(element); |
| 1050 | ADD_FAILURE() << "Should not have reached this line."; |
| 1051 | } |
| 1052 | catch (const std::invalid_argument& e) |
| 1053 | { |
| 1054 | EXPECT_STREQ(e.what(), "Element is not a boolean"); |
| 1055 | } |
| 1056 | |
| 1057 | // Test where fails: Invalid property specified |
| 1058 | try |
| 1059 | { |
| 1060 | const json element = R"( |
| 1061 | { |
| 1062 | "format": "linear", |
| 1063 | "foo": "bar" |
| 1064 | } |
| 1065 | )"_json; |
| 1066 | parsePMBusWriteVoutCommand(element); |
| 1067 | ADD_FAILURE() << "Should not have reached this line."; |
| 1068 | } |
| 1069 | catch (const std::invalid_argument& e) |
| 1070 | { |
| 1071 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 1072 | } |
| 1073 | } |
| 1074 | |
| 1075 | TEST(ConfigFileParserTests, ParseRoot) |
| 1076 | { |
| 1077 | // Test where works: Only required properties specified |
| 1078 | { |
| 1079 | const json element = R"( |
| 1080 | { |
| 1081 | "chassis": [ |
| 1082 | { "number": 1 } |
| 1083 | ] |
| 1084 | } |
| 1085 | )"_json; |
| 1086 | std::vector<std::unique_ptr<Rule>> rules{}; |
| 1087 | std::vector<std::unique_ptr<Chassis>> chassis{}; |
| 1088 | std::tie(rules, chassis) = parseRoot(element); |
| 1089 | EXPECT_EQ(rules.size(), 0); |
| 1090 | // TODO: Not implemented yet |
| 1091 | // EXPECT_EQ(chassis.size(), 1); |
| 1092 | } |
| 1093 | |
| 1094 | // Test where works: All properties specified |
| 1095 | { |
| 1096 | const json element = R"( |
| 1097 | { |
| 1098 | "comments": [ "Config file for a FooBar one-chassis system" ], |
| 1099 | "rules": [ |
| 1100 | { |
| 1101 | "id": "set_voltage_rule", |
| 1102 | "actions": [ |
| 1103 | { "pmbus_write_vout_command": { "format": "linear" } } |
| 1104 | ] |
| 1105 | } |
| 1106 | ], |
| 1107 | "chassis": [ |
| 1108 | { "number": 1 }, |
| 1109 | { "number": 3 } |
| 1110 | ] |
| 1111 | } |
| 1112 | )"_json; |
| 1113 | std::vector<std::unique_ptr<Rule>> rules{}; |
| 1114 | std::vector<std::unique_ptr<Chassis>> chassis{}; |
| 1115 | std::tie(rules, chassis) = parseRoot(element); |
| 1116 | EXPECT_EQ(rules.size(), 1); |
| 1117 | // TODO: Not implemented yet |
| 1118 | // EXPECT_EQ(chassis.size(), 2); |
| 1119 | } |
| 1120 | |
| 1121 | // Test where fails: Element is not an object |
| 1122 | try |
| 1123 | { |
| 1124 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 1125 | parseRoot(element); |
| 1126 | ADD_FAILURE() << "Should not have reached this line."; |
| 1127 | } |
| 1128 | catch (const std::invalid_argument& e) |
| 1129 | { |
| 1130 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 1131 | } |
| 1132 | |
| 1133 | // Test where fails: chassis property not specified |
| 1134 | try |
| 1135 | { |
| 1136 | const json element = R"( |
| 1137 | { |
| 1138 | "rules": [ |
| 1139 | { |
| 1140 | "id": "set_voltage_rule", |
| 1141 | "actions": [ |
| 1142 | { "pmbus_write_vout_command": { "format": "linear" } } |
| 1143 | ] |
| 1144 | } |
| 1145 | ] |
| 1146 | } |
| 1147 | )"_json; |
| 1148 | parseRoot(element); |
| 1149 | ADD_FAILURE() << "Should not have reached this line."; |
| 1150 | } |
| 1151 | catch (const std::invalid_argument& e) |
| 1152 | { |
| 1153 | EXPECT_STREQ(e.what(), "Required property missing: chassis"); |
| 1154 | } |
| 1155 | |
| 1156 | // Test where fails: Invalid property specified |
| 1157 | try |
| 1158 | { |
| 1159 | const json element = R"( |
| 1160 | { |
| 1161 | "remarks": [ "Config file for a FooBar one-chassis system" ], |
| 1162 | "chassis": [ |
| 1163 | { "number": 1 } |
| 1164 | ] |
| 1165 | } |
| 1166 | )"_json; |
| 1167 | parseRoot(element); |
| 1168 | ADD_FAILURE() << "Should not have reached this line."; |
| 1169 | } |
| 1170 | catch (const std::invalid_argument& e) |
| 1171 | { |
| 1172 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 1173 | } |
| 1174 | } |
| 1175 | |
| 1176 | TEST(ConfigFileParserTests, ParseRule) |
| 1177 | { |
| 1178 | // Test where works: comments property specified |
| 1179 | { |
| 1180 | const json element = R"( |
| 1181 | { |
| 1182 | "comments": [ "Set voltage rule" ], |
| 1183 | "id": "set_voltage_rule", |
| 1184 | "actions": [ |
| 1185 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } }, |
| 1186 | { "pmbus_write_vout_command": { "volts": 1.03, "format": "linear" } } |
| 1187 | ] |
| 1188 | } |
| 1189 | )"_json; |
| 1190 | std::unique_ptr<Rule> rule = parseRule(element); |
| 1191 | EXPECT_EQ(rule->getID(), "set_voltage_rule"); |
| 1192 | EXPECT_EQ(rule->getActions().size(), 2); |
| 1193 | } |
| 1194 | |
| 1195 | // Test where works: comments property not specified |
| 1196 | { |
| 1197 | const json element = R"( |
| 1198 | { |
| 1199 | "id": "set_voltage_rule", |
| 1200 | "actions": [ |
| 1201 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } }, |
| 1202 | { "pmbus_write_vout_command": { "volts": 1.03, "format": "linear" } }, |
| 1203 | { "pmbus_write_vout_command": { "volts": 1.05, "format": "linear" } } |
| 1204 | ] |
| 1205 | } |
| 1206 | )"_json; |
| 1207 | std::unique_ptr<Rule> rule = parseRule(element); |
| 1208 | EXPECT_EQ(rule->getID(), "set_voltage_rule"); |
| 1209 | EXPECT_EQ(rule->getActions().size(), 3); |
| 1210 | } |
| 1211 | |
| 1212 | // Test where fails: Element is not an object |
| 1213 | try |
| 1214 | { |
| 1215 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 1216 | parseRule(element); |
| 1217 | ADD_FAILURE() << "Should not have reached this line."; |
| 1218 | } |
| 1219 | catch (const std::invalid_argument& e) |
| 1220 | { |
| 1221 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 1222 | } |
| 1223 | |
| 1224 | // Test where fails: id property not specified |
| 1225 | try |
| 1226 | { |
| 1227 | const json element = R"( |
| 1228 | { |
| 1229 | "actions": [ |
| 1230 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } } |
| 1231 | ] |
| 1232 | } |
| 1233 | )"_json; |
| 1234 | parseRule(element); |
| 1235 | ADD_FAILURE() << "Should not have reached this line."; |
| 1236 | } |
| 1237 | catch (const std::invalid_argument& e) |
| 1238 | { |
| 1239 | EXPECT_STREQ(e.what(), "Required property missing: id"); |
| 1240 | } |
| 1241 | |
| 1242 | // Test where fails: id property is invalid |
| 1243 | try |
| 1244 | { |
| 1245 | const json element = R"( |
| 1246 | { |
| 1247 | "id": "", |
| 1248 | "actions": [ |
| 1249 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } } |
| 1250 | ] |
| 1251 | } |
| 1252 | )"_json; |
| 1253 | parseRule(element); |
| 1254 | ADD_FAILURE() << "Should not have reached this line."; |
| 1255 | } |
| 1256 | catch (const std::invalid_argument& e) |
| 1257 | { |
| 1258 | EXPECT_STREQ(e.what(), "Element contains an empty string"); |
| 1259 | } |
| 1260 | |
| 1261 | // Test where fails: actions property not specified |
| 1262 | try |
| 1263 | { |
| 1264 | const json element = R"( |
| 1265 | { |
| 1266 | "comments": [ "Set voltage rule" ], |
| 1267 | "id": "set_voltage_rule" |
| 1268 | } |
| 1269 | )"_json; |
| 1270 | parseRule(element); |
| 1271 | ADD_FAILURE() << "Should not have reached this line."; |
| 1272 | } |
| 1273 | catch (const std::invalid_argument& e) |
| 1274 | { |
| 1275 | EXPECT_STREQ(e.what(), "Required property missing: actions"); |
| 1276 | } |
| 1277 | |
| 1278 | // Test where fails: actions property is invalid |
| 1279 | try |
| 1280 | { |
| 1281 | const json element = R"( |
| 1282 | { |
| 1283 | "id": "set_voltage_rule", |
| 1284 | "actions": true |
| 1285 | } |
| 1286 | )"_json; |
| 1287 | parseRule(element); |
| 1288 | ADD_FAILURE() << "Should not have reached this line."; |
| 1289 | } |
| 1290 | catch (const std::invalid_argument& e) |
| 1291 | { |
| 1292 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 1293 | } |
| 1294 | |
| 1295 | // Test where fails: Invalid property specified |
| 1296 | try |
| 1297 | { |
| 1298 | const json element = R"( |
| 1299 | { |
| 1300 | "remarks": [ "Set voltage rule" ], |
| 1301 | "id": "set_voltage_rule", |
| 1302 | "actions": [ |
| 1303 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } } |
| 1304 | ] |
| 1305 | } |
| 1306 | )"_json; |
| 1307 | parseRule(element); |
| 1308 | ADD_FAILURE() << "Should not have reached this line."; |
| 1309 | } |
| 1310 | catch (const std::invalid_argument& e) |
| 1311 | { |
| 1312 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 1313 | } |
| 1314 | } |
| 1315 | |
| 1316 | TEST(ConfigFileParserTests, ParseRuleArray) |
| 1317 | { |
| 1318 | // Test where works |
| 1319 | { |
| 1320 | const json element = R"( |
| 1321 | [ |
| 1322 | { |
| 1323 | "id": "set_voltage_rule1", |
| 1324 | "actions": [ |
| 1325 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } } |
| 1326 | ] |
| 1327 | }, |
| 1328 | { |
| 1329 | "id": "set_voltage_rule2", |
| 1330 | "actions": [ |
| 1331 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } }, |
| 1332 | { "pmbus_write_vout_command": { "volts": 1.11, "format": "linear" } } |
| 1333 | ] |
| 1334 | } |
| 1335 | ] |
| 1336 | )"_json; |
| 1337 | std::vector<std::unique_ptr<Rule>> rules = parseRuleArray(element); |
| 1338 | EXPECT_EQ(rules.size(), 2); |
| 1339 | EXPECT_EQ(rules[0]->getID(), "set_voltage_rule1"); |
| 1340 | EXPECT_EQ(rules[0]->getActions().size(), 1); |
| 1341 | EXPECT_EQ(rules[1]->getID(), "set_voltage_rule2"); |
| 1342 | EXPECT_EQ(rules[1]->getActions().size(), 2); |
| 1343 | } |
| 1344 | |
| 1345 | // Test where fails: Element is not an array |
| 1346 | try |
| 1347 | { |
| 1348 | const json element = R"( { "id": "set_voltage_rule" } )"_json; |
| 1349 | parseRuleArray(element); |
| 1350 | ADD_FAILURE() << "Should not have reached this line."; |
| 1351 | } |
| 1352 | catch (const std::invalid_argument& e) |
| 1353 | { |
| 1354 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 1355 | } |
| 1356 | } |
| 1357 | |
| 1358 | TEST(ConfigFileParserTests, ParseString) |
| 1359 | { |
| 1360 | // Test where works: Empty string |
| 1361 | { |
| 1362 | const json element = ""; |
| 1363 | std::string value = parseString(element, true); |
| 1364 | EXPECT_EQ(value, ""); |
| 1365 | } |
| 1366 | |
| 1367 | // Test where works: Non-empty string |
| 1368 | { |
| 1369 | const json element = "vdd_regulator"; |
| 1370 | std::string value = parseString(element, false); |
| 1371 | EXPECT_EQ(value, "vdd_regulator"); |
| 1372 | } |
| 1373 | |
| 1374 | // Test where fails: Element is not a string |
| 1375 | try |
| 1376 | { |
| 1377 | const json element = R"( { "foo": "bar" } )"_json; |
| 1378 | parseString(element); |
| 1379 | ADD_FAILURE() << "Should not have reached this line."; |
| 1380 | } |
| 1381 | catch (const std::invalid_argument& e) |
| 1382 | { |
| 1383 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 1384 | } |
| 1385 | |
| 1386 | // Test where fails: Empty string |
| 1387 | try |
| 1388 | { |
| 1389 | const json element = ""; |
| 1390 | parseString(element); |
| 1391 | ADD_FAILURE() << "Should not have reached this line."; |
| 1392 | } |
| 1393 | catch (const std::invalid_argument& e) |
| 1394 | { |
| 1395 | EXPECT_STREQ(e.what(), "Element contains an empty string"); |
| 1396 | } |
| 1397 | } |
| 1398 | |
Bob King | f617f89 | 2020-03-30 19:03:35 +0800 | [diff] [blame] | 1399 | TEST(ConfigFileParserTests, ParseStringToUint8) |
| 1400 | { |
| 1401 | // Test where works: "0xFF" |
| 1402 | { |
| 1403 | const json element = R"( "0xFF" )"_json; |
| 1404 | uint8_t value = parseStringToUint8(element); |
| 1405 | EXPECT_EQ(value, 0xFF); |
| 1406 | } |
| 1407 | |
| 1408 | // Test where works: "0xff" |
| 1409 | { |
| 1410 | const json element = R"( "0xff" )"_json; |
| 1411 | uint8_t value = parseStringToUint8(element); |
| 1412 | EXPECT_EQ(value, 0xff); |
| 1413 | } |
| 1414 | |
| 1415 | // Test where works: "0xf" |
| 1416 | { |
| 1417 | const json element = R"( "0xf" )"_json; |
| 1418 | uint8_t value = parseStringToUint8(element); |
| 1419 | EXPECT_EQ(value, 0xf); |
| 1420 | } |
| 1421 | |
| 1422 | // Test where fails: "0xfff" |
| 1423 | try |
| 1424 | { |
| 1425 | const json element = R"( "0xfff" )"_json; |
| 1426 | parseStringToUint8(element); |
| 1427 | ADD_FAILURE() << "Should not have reached this line."; |
| 1428 | } |
| 1429 | catch (const std::invalid_argument& e) |
| 1430 | { |
| 1431 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 1432 | } |
| 1433 | |
| 1434 | // Test where fails: "0xAG" |
| 1435 | try |
| 1436 | { |
| 1437 | const json element = R"( "0xAG" )"_json; |
| 1438 | parseStringToUint8(element); |
| 1439 | ADD_FAILURE() << "Should not have reached this line."; |
| 1440 | } |
| 1441 | catch (const std::invalid_argument& e) |
| 1442 | { |
| 1443 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 1444 | } |
| 1445 | |
| 1446 | // Test where fails: "ff" |
| 1447 | try |
| 1448 | { |
| 1449 | const json element = R"( "ff" )"_json; |
| 1450 | parseStringToUint8(element); |
| 1451 | ADD_FAILURE() << "Should not have reached this line."; |
| 1452 | } |
| 1453 | catch (const std::invalid_argument& e) |
| 1454 | { |
| 1455 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 1456 | } |
| 1457 | |
| 1458 | // Test where fails: "" |
| 1459 | try |
| 1460 | { |
| 1461 | const json element = ""; |
| 1462 | parseStringToUint8(element); |
| 1463 | ADD_FAILURE() << "Should not have reached this line."; |
| 1464 | } |
| 1465 | catch (const std::invalid_argument& e) |
| 1466 | { |
| 1467 | EXPECT_STREQ(e.what(), "Element contains an empty string"); |
| 1468 | } |
| 1469 | |
| 1470 | // Test where fails: "f" |
| 1471 | try |
| 1472 | { |
| 1473 | const json element = R"( "f" )"_json; |
| 1474 | parseStringToUint8(element); |
| 1475 | ADD_FAILURE() << "Should not have reached this line."; |
| 1476 | } |
| 1477 | catch (const std::invalid_argument& e) |
| 1478 | { |
| 1479 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 1480 | } |
| 1481 | |
| 1482 | // Test where fails: "0x" |
| 1483 | try |
| 1484 | { |
| 1485 | const json element = R"( "0x" )"_json; |
| 1486 | parseStringToUint8(element); |
| 1487 | ADD_FAILURE() << "Should not have reached this line."; |
| 1488 | } |
| 1489 | catch (const std::invalid_argument& e) |
| 1490 | { |
| 1491 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 1492 | } |
| 1493 | |
| 1494 | // Test where fails: "0Xff" |
| 1495 | try |
| 1496 | { |
| 1497 | const json element = R"( "0XFF" )"_json; |
| 1498 | parseStringToUint8(element); |
| 1499 | ADD_FAILURE() << "Should not have reached this line."; |
| 1500 | } |
| 1501 | catch (const std::invalid_argument& e) |
| 1502 | { |
| 1503 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 1504 | } |
| 1505 | } |
| 1506 | |
| 1507 | TEST(ConfigFileParserTests, ParseUint8) |
| 1508 | { |
| 1509 | // Test where works: 0 |
| 1510 | { |
| 1511 | const json element = R"( 0 )"_json; |
| 1512 | uint8_t value = parseUint8(element); |
| 1513 | EXPECT_EQ(value, 0); |
| 1514 | } |
| 1515 | |
| 1516 | // Test where works: UINT8_MAX |
| 1517 | { |
| 1518 | const json element = R"( 255 )"_json; |
| 1519 | uint8_t value = parseUint8(element); |
| 1520 | EXPECT_EQ(value, 255); |
| 1521 | } |
| 1522 | |
| 1523 | // Test where fails: Element is not an integer |
| 1524 | try |
| 1525 | { |
| 1526 | const json element = R"( 1.03 )"_json; |
| 1527 | parseUint8(element); |
| 1528 | ADD_FAILURE() << "Should not have reached this line."; |
| 1529 | } |
| 1530 | catch (const std::invalid_argument& e) |
| 1531 | { |
| 1532 | EXPECT_STREQ(e.what(), "Element is not an integer"); |
| 1533 | } |
| 1534 | |
| 1535 | // Test where fails: Value < 0 |
| 1536 | try |
| 1537 | { |
| 1538 | const json element = R"( -1 )"_json; |
| 1539 | parseUint8(element); |
| 1540 | ADD_FAILURE() << "Should not have reached this line."; |
| 1541 | } |
| 1542 | catch (const std::invalid_argument& e) |
| 1543 | { |
| 1544 | EXPECT_STREQ(e.what(), "Element is not an 8-bit unsigned integer"); |
| 1545 | } |
| 1546 | |
| 1547 | // Test where fails: Value > UINT8_MAX |
| 1548 | try |
| 1549 | { |
| 1550 | const json element = R"( 256 )"_json; |
| 1551 | parseUint8(element); |
| 1552 | ADD_FAILURE() << "Should not have reached this line."; |
| 1553 | } |
| 1554 | catch (const std::invalid_argument& e) |
| 1555 | { |
| 1556 | EXPECT_STREQ(e.what(), "Element is not an 8-bit unsigned integer"); |
| 1557 | } |
| 1558 | } |
| 1559 | |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 1560 | TEST(ConfigFileParserTests, VerifyIsArray) |
| 1561 | { |
| 1562 | // Test where element is an array |
| 1563 | try |
| 1564 | { |
| 1565 | const json element = R"( [ "foo", "bar" ] )"_json; |
| 1566 | verifyIsArray(element); |
| 1567 | } |
| 1568 | catch (const std::exception& e) |
| 1569 | { |
| 1570 | ADD_FAILURE() << "Should not have caught exception."; |
| 1571 | } |
| 1572 | |
| 1573 | // Test where element is not an array |
| 1574 | try |
| 1575 | { |
| 1576 | const json element = R"( { "foo": "bar" } )"_json; |
| 1577 | verifyIsArray(element); |
| 1578 | ADD_FAILURE() << "Should not have reached this line."; |
| 1579 | } |
| 1580 | catch (const std::invalid_argument& e) |
| 1581 | { |
| 1582 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 1583 | } |
| 1584 | } |
| 1585 | |
| 1586 | TEST(ConfigFileParserTests, VerifyIsObject) |
| 1587 | { |
| 1588 | // Test where element is an object |
| 1589 | try |
| 1590 | { |
| 1591 | const json element = R"( { "foo": "bar" } )"_json; |
| 1592 | verifyIsObject(element); |
| 1593 | } |
| 1594 | catch (const std::exception& e) |
| 1595 | { |
| 1596 | ADD_FAILURE() << "Should not have caught exception."; |
| 1597 | } |
| 1598 | |
| 1599 | // Test where element is not an object |
| 1600 | try |
| 1601 | { |
| 1602 | const json element = R"( [ "foo", "bar" ] )"_json; |
| 1603 | verifyIsObject(element); |
| 1604 | ADD_FAILURE() << "Should not have reached this line."; |
| 1605 | } |
| 1606 | catch (const std::invalid_argument& e) |
| 1607 | { |
| 1608 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 1609 | } |
| 1610 | } |
| 1611 | |
| 1612 | TEST(ConfigFileParserTests, VerifyPropertyCount) |
| 1613 | { |
| 1614 | // Test where element has expected number of properties |
| 1615 | try |
| 1616 | { |
| 1617 | const json element = R"( |
| 1618 | { |
| 1619 | "comments": [ "Set voltage rule" ], |
| 1620 | "id": "set_voltage_rule" |
| 1621 | } |
| 1622 | )"_json; |
| 1623 | verifyPropertyCount(element, 2); |
| 1624 | } |
| 1625 | catch (const std::exception& e) |
| 1626 | { |
| 1627 | ADD_FAILURE() << "Should not have caught exception."; |
| 1628 | } |
| 1629 | |
| 1630 | // Test where element has unexpected number of properties |
| 1631 | try |
| 1632 | { |
| 1633 | const json element = R"( |
| 1634 | { |
| 1635 | "comments": [ "Set voltage rule" ], |
| 1636 | "id": "set_voltage_rule", |
| 1637 | "foo": 1.3 |
| 1638 | } |
| 1639 | )"_json; |
| 1640 | verifyPropertyCount(element, 2); |
| 1641 | ADD_FAILURE() << "Should not have reached this line."; |
| 1642 | } |
| 1643 | catch (const std::invalid_argument& e) |
| 1644 | { |
| 1645 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 1646 | } |
| 1647 | } |