tree 23d2e36c8330e780823f777901502db309b5233e
parent ba2241c636735fbc12a870a316b8b0d9a850557e
author Thang Tran <thuutran@amperecomputing.com> 1644311051 +0700
committer Thang Tran <thuutran@amperecomputing.com> 1644313034 +0700

set requested state to off when power policy is always-off

Issue:
Step 1: Set the power policy to "always-on" then turn off/on the chassis
power. HOST shall be turned on after BMC has been rebooted.
Step 2: Set the power policy to "always-off" then turn off/on the
chassis power. HOST shall be turn off after BMC has been rebooted.
Step 3: Set the power policy to "previous" then turn off/on the chassis
power. Wait until BMC has been rebooted.
Expect: At step 3, HOST should be turned off due to BMC turned off HOST
in step 2.
Actual: At step 3, HOST is turned on.

Root cause: In step 1, BMC updated the requested state to "On". But in
step 2, BMC did not update requested state to "Off", it is still "On".
Therefore, in step 3, when BMC check the requested state (it is being
"On"), BMC turns on the HOST.

Solution: When power policy is "always-off", set the requested state to
"Off".

Tested:
       Repeat 3 above steps, at step 3, HOST state is "Off"

Signed-off-by: Thang Tran <thuutran@amperecomputing.com>
Change-Id: Ib50de99ae935f2ccb777226d78848e33e5db9906