#!/bin/sh -e

set -euo pipefail

OPTS="bmcstate,bootprogress,chassiskill,chassisoff,chassison,chassisstate,hoststate,\
osstate,power,poweroff,poweron,state,status,rebootoff,rebooton,recoveryoff,recoveryon"

USAGE="Usage: obmcutil [-h] [--wait] [--verbose]
                {$OPTS}"

INTERFACE_ROOT=xyz.openbmc_project
STATE_INTERFACE=$INTERFACE_ROOT.State
CONTROL_INTERFACE=$INTERFACE_ROOT.Control

OBJECT_ROOT=/xyz/openbmc_project
STATE_OBJECT=$OBJECT_ROOT/state
CONTROL_OBJECT=$OBJECT_ROOT/control

HOST_TIMEOUT_TARGET=obmc-host-timeout@0.target
HOST_CRASH_TARGET=obmc-host-crash@0.target

## NOTE: The following global variables are used only in the run_timeout cmd.
## By declaring these globally instead of passing them through the
## intermediary functions, which may not be "best practice", the readability
## and cleanliness of the code should at least be increased.

# The command passed in to be executed (e.g. poweron/off, status, etc.)
# This will be be used in some instances of error reporting
G_ORIG_CMD=
# The state an interface should be in after executing the requested command.
G_REQUESTED_STATE=
# The query to run during a poweron/off or chassison/off to check that
# the requested state (G_REQUESTED_STATE) of the interface has been reached.
G_QUERY=
# Wait the set period of time for state transitions to be successful before
# continuing on with the program or reporting an error if timeout reached.
G_WAIT=
# Print the journal to the console
G_VERBOSE=

print_help ()
{
    echo "$USAGE"
    echo ""
    echo "positional arguments:"
    echo "  {$OPTS}"
    echo ""
    echo "Examples:"
    echo ""
    echo "obmcutil rebootoff    Disable auto reboot from Quiesce state"
    echo "obmcutil rebooton     Enable auto reboot from Quiesce state"
    echo ""
    echo "obmcutil recoveryoff  Disable handling boot watchdog timeout and host crash"
    echo "                      Also, disable auto reboot from Quiesce state"
    echo "obmcutil recoveryon   Enable handling boot watchdog timeout and host crash"
    echo "                      Also, enable auto reboot from Quiesce state"
    echo ""
    echo "optional arguments:"
    echo "  -h, --help          show this help message and exit"
    echo "  -w, --wait          block until state transition succeeds or fails"
    echo "  -v, --verbose       print the journal to stdout if --wait is supplied"
    exit 0
}

run_timeout ()
{
    local timeout="$1"; shift
    local cmd="$@"
    local verbose_child=

    if [ -n "$G_VERBOSE" ]; then
        journalctl -f &
        verbose_child=$!
    fi

    $cmd

    # Run a background query for the transition to the expected state
    # This will be killed if the transition doesn't succeed within
    # a timeout period.
    (
        while ! grep -q $G_REQUESTED_STATE <<< $(handle_cmd $G_QUERY) ; do
            sleep 1
        done
    ) &
    wait_child=$!

    # Could be bad if process is killed before 'timeout' occurs if
    # transition doesn't succeed.
    trap -- "" SIGTERM

    # Workaround for lack of 'timeout' command.
    (
        sleep $timeout
        kill $wait_child
    ) > /dev/null 2>&1 &

    if ! wait $wait_child; then
        echo "Unable to confirm '$G_ORIG_CMD' success" \
        "within timeout period (${timeout}s)"
    fi

    if [ -n $verbose_child ]; then
        kill $verbose_child
    fi
}

run_cmd ()
{
    local cmd="$@";

    if [ -n "$G_WAIT" ]; then
        run_timeout $G_WAIT "$cmd"
    else
        $cmd
    fi
}

set_property ()
{
    run_cmd busctl set-property "$@"
}

get_property ()
{
    G_WAIT=""
    run_cmd busctl get-property "$@"
}

state_query ()
{
    local state=$(get_property "$@" | cut -d '"' -f2)
    printf "%-20s: %s\n" $4 $state
}

print_usage_err ()
{
    echo "ERROR: $1" >&2
    echo "$USAGE"
    exit 1
}

mask_systemd_target ()
{
    target="$@"
    systemctl mask $target
}

unmask_systemd_target ()
{
    target="$@"
    systemctl unmask $target
}

handle_cmd ()
{
    case "$1" in
        chassisoff)
            OBJECT=$STATE_OBJECT/chassis0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.Chassis
            PROPERTY=RequestedPowerTransition
            VALUE=$INTERFACE.Transition.Off
            G_REQUESTED_STATE=$INTERFACE.PowerState.Off
            G_QUERY="chassisstate"
            set_property $SERVICE $OBJECT $INTERFACE $PROPERTY "s" $VALUE
            ;;
        chassison)
            OBJECT=$STATE_OBJECT/chassis0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.Chassis
            PROPERTY=RequestedPowerTransition
            VALUE=$INTERFACE.Transition.On
            G_REQUESTED_STATE=$INTERFACE.PowerState.On
            G_QUERY="chassisstate"
            set_property $SERVICE $OBJECT $INTERFACE $PROPERTY "s" $VALUE
            ;;
        poweroff)
            OBJECT=$STATE_OBJECT/host0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.Host
            PROPERTY=RequestedHostTransition
            VALUE=$INTERFACE.Transition.Off
            G_REQUESTED_STATE=$INTERFACE.HostState.Off
            G_QUERY="hoststate"
            set_property $SERVICE $OBJECT $INTERFACE $PROPERTY "s" $VALUE
            ;;
        poweron)
            OBJECT=$STATE_OBJECT/host0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.Host
            PROPERTY=RequestedHostTransition
            VALUE=$INTERFACE.Transition.On
            G_REQUESTED_STATE=$INTERFACE.HostState.Running
            G_QUERY="hoststate"
            set_property $SERVICE $OBJECT $INTERFACE $PROPERTY "s" $VALUE
            ;;
        bmcstate)
            OBJECT=$STATE_OBJECT/bmc0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.BMC
            PROPERTY=CurrentBMCState
            state_query $SERVICE $OBJECT $INTERFACE $PROPERTY
            ;;
        chassisstate)
            OBJECT=$STATE_OBJECT/chassis0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.Chassis
            PROPERTY=CurrentPowerState
            state_query $SERVICE $OBJECT $INTERFACE $PROPERTY
            ;;
        hoststate)
            OBJECT=$STATE_OBJECT/host0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.Host
            PROPERTY=CurrentHostState
            state_query $SERVICE $OBJECT $INTERFACE $PROPERTY
            ;;
        osstate)
            OBJECT=$STATE_OBJECT/host0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.OperatingSystem.Status
            PROPERTY=OperatingSystemState
            state_query $SERVICE $OBJECT $INTERFACE $PROPERTY
            ;;
        state|status)
            for query in bmcstate chassisstate hoststate bootprogress osstate
            do
                handle_cmd $query
            done
            ;;
        bootprogress)
            OBJECT=$STATE_OBJECT/host0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.Boot.Progress
            PROPERTY=BootProgress
            state_query $SERVICE $OBJECT $INTERFACE $PROPERTY
            ;;
        power)
            OBJECT=/org/openbmc/control/power0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=org.openbmc.control.Power
            for property in pgood state pgood_timeout
            do
                # get_property can potentially return several
                # different formats of values, so we do the parsing outside
                # of get_property depending on the query. These queries
                # return 'i VALUE' formatted strings.
                STATE=$(get_property $SERVICE $OBJECT $INTERFACE $property \
                    | sed 's/i[ ^I]*//')
                printf "%s = %s\n" $property $STATE
            done
            ;;
        chassiskill)
            /usr/libexec/chassiskill
            ;;
        rebootoff)
            OBJECT=$CONTROL_OBJECT/host0/auto_reboot
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$CONTROL_INTERFACE.Boot.RebootPolicy
            PROPERTY=AutoReboot
            VALUE=false
            set_property $SERVICE $OBJECT $INTERFACE $PROPERTY "b" $VALUE
            ;;
        rebooton)
            OBJECT=$CONTROL_OBJECT/host0/auto_reboot
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$CONTROL_INTERFACE.Boot.RebootPolicy
            PROPERTY=AutoReboot
            VALUE=true
            set_property $SERVICE $OBJECT $INTERFACE $PROPERTY "b" $VALUE
            ;;
        recoveryoff)
            handle_cmd rebootoff
            mask_systemd_target $HOST_TIMEOUT_TARGET
            mask_systemd_target $HOST_CRASH_TARGET
            ;;
        recoveryon)
            handle_cmd rebooton
            unmask_systemd_target $HOST_TIMEOUT_TARGET
            unmask_systemd_target $HOST_CRASH_TARGET
            ;;
        *)
            print_usage_err "Invalid command '$1'"
            ;;
    esac
}

for arg in "$@"; do
    case $arg in
        -w|--wait)
            G_WAIT=30
            continue
            ;;
        -h|--help)
            print_help
            ;;
        -v|--verbose)
            G_VERBOSE=y
            ;;
        -*)
            print_usage_err "Unknown option: $arg"
            ;;
        *)
            G_ORIG_CMD=$arg
            handle_cmd $arg
            break
            ;;
    esac
done