diff --git a/platform.cpp b/platform.cpp
index 015a1db..15f4948 100644
--- a/platform.cpp
+++ b/platform.cpp
@@ -3,6 +3,7 @@
 
 #include "gpio.hpp"
 #include "i2c.hpp"
+#include "nvidia.hpp"
 #include "utilities.hpp"
 
 #include <fcntl.h>
@@ -11,166 +12,15 @@
 #include <CLI/CLI.hpp>
 #include <gpiod.hpp>
 
-#include <chrono>
-#include <cstdint>
-#include <cstdlib>
-#include <cstring>
-#include <filesystem>
-#include <format>
-#include <fstream>
+#include <algorithm>
+#include <array>
 #include <iostream>
-
-using namespace std::chrono_literals;
-
-void init_p2020_gpu_card()
-{
-    std::cerr << "Initializing GPU card...\n";
-
-    // Init the P2020 gpio expander
-    i2c::new_device(14, 0x20, "pca6408");
-
-    // Wait for device to be created
-    const auto* device_path = "/sys/bus/i2c/devices/14-0020";
-    wait_for_path_to_exist(device_path, 1000ms);
-
-    // Find the GPIO chip number
-    int gpiochipint = gpio::find_chip_idx_from_dir(device_path);
-    if (gpiochipint < 0)
-    {
-        return;
-    }
-    // Set MCU in recovery
-    gpio::set_raw(gpiochipint, 3, 1);
-
-    // Reset MCU
-    gpio::set_raw(gpiochipint, 4, 0);
-    gpio::set_raw(gpiochipint, 4, 1);
-
-    // Switch MUX to MCU
-    gpio::set_raw(gpiochipint, 5, 1);
-}
-
-bool hmc_is_present()
-{
-    std::error_code ec;
-    bool exists = std::filesystem::exists("/sys/bus/i2c/devices/9-0074", ec);
-    if (ec)
-    {
-        exists = false;
-    }
-    if (exists)
-    {
-        std::cerr << "HMC present in platform";
-    }
-    else
-    {
-        std::cerr << "HMC not present in platform";
-    }
-    return exists;
-}
-
-int init_nvidia_gb200(bool has_p2020)
-{
-    // Reset USB hubs
-    gpio::set("USB_HUB_RESET_L-O", 0, 10000ms);
-    bool hmc_present = hmc_is_present();
-    if (!hmc_present)
-    {
-        gpio::set("SEC_USB2_HUB_RST_L-O", 0, 10000ms);
-    }
-
-    sleep_milliseconds(100ms);
-    if (!hmc_present)
-    {
-        gpio::set("SEC_USB2_HUB_RST_L-O", 1);
-    }
-    //  Write SGPIO_BMC_EN-O=1 to correctly set mux to send SGPIO signals to
-    //  FPGA
-    gpio::set("SGPIO_BMC_EN-O", 1);
-
-    // Write the bit for BMC without HMC
-    gpio::set("HMC_BMC_DETECT-O", static_cast<int>(!hmc_present), 30000ms);
-
-    // Set BMC_EROT_FPGA_SPI_MUX_SEL-O = 1 to enable FPGA to access its EROT
-    gpio::set("BMC_EROT_FPGA_SPI_MUX_SEL-O", 1);
-
-    // Enable 12V
-    gpio::set("BMC_12V_CTRL-O", 1, 10000ms);
-
-    gpio::set("PWR_BRAKE_L-O", 1);
-    gpio::set("SHDN_REQ_L-O", 1);
-    gpio::set("SHDN_FORCE_L-O", 1);
-    // Hold in reset (asserted) after standby power enabled
-    gpio::set("SYS_RST_IN_L-O", 0);
-
-    gpio::Event fpga_ready_wait = gpio::Event("FPGA_READY_BMC-I", 1);
-    gpio::Event sec_erot_fpga_rst = gpio::Event("SEC_FPGA_READY_BMC-I", 1);
-
-    // Release FPGA EROT from reset
-    gpio::set("EROT_FPGA_RST_L-O", 1);
-    gpio::set("SEC_EROT_FPGA_RST_L-O", 1);
-
-    sleep_milliseconds(100ms);
-
-    gpio::set("FPGA_RST_L-O", 1);
-
-    if (fpga_ready_wait.wait() != gpio::EventResult::Asserted)
-    {
-        std::cerr << "FPGA_READY_BMC-I failed to assert\n";
-        // return EXIT_FAILURE;
-    }
-
-    if (sec_erot_fpga_rst.wait() != gpio::EventResult::Asserted)
-    {
-        std::cerr << "SEC_FPGA_READY_BMC-I failed to assert\n";
-        // return EXIT_FAILURE;
-    }
-
-    // ReInitialize the FPGA connected I2C buses to unstick them and let
-    // FruDevice know it can scan for FRUs I2c bus 1
-    i2c::rebind_controller("1e78a100");
-    // I2c bus 2
-    i2c::rebind_controller("1e78a180");
-
-    // Set sgpio signals
-    gpio::set("RUN_POWER_EN-O", 1);
-    gpio::set("SYS_RST_IN_L-O", 1);
-    gpio::set("GLOBAL_WP_BMC-O", 0);
-
-    gpio::set("BMC_READY-O", 1);
-
-    if (has_p2020)
-    {
-        init_p2020_gpu_card();
-    }
-
-    gpio::set("USB_HUB_RESET_L-O", 1);
-    if (!hmc_present)
-    {
-        gpio::set("SEC_USB2_HUB_RST_L-O", 1);
-    }
-
-    sd_notify(0, "READY=1");
-    std::cerr << "Platform init complete\n";
-    pause();
-    std::cerr << "Releasing platform\n";
-
-    return EXIT_SUCCESS;
-}
-
-int init_nvidia_gb200_base()
-{
-    return init_nvidia_gb200(false);
-}
-
-int init_nvidia_gb200_with_p2020()
-{
-    return init_nvidia_gb200(true);
-}
+#include <string_view>
+#include <utility>
 
 constexpr std::array<std::pair<std::string_view, int (*)()>, 2> init_functions{
-    {{"nvidia-gb200", init_nvidia_gb200_base},
-     {"nvidia-gb200-with-p2020", init_nvidia_gb200_with_p2020}}};
+    {{"nvidia-gb200", nvidia::init_gb200_base},
+     {"nvidia-gb200-with-p2020", nvidia::init_gb200_with_p2020}}};
 
 int main(int argc, char** argv)
 {