tree 946fcceb6eaa86430eb55acb4019cef80f59f898
parent 821ebc47712a81a933f00a67a1bf43bd6093b8df
author George Liu <liuxiwei@inspur.com> 1611050202 +0800
committer George Liu <liuxiwei@inspur.com> 1612443518 +0000

Fix the getStateSensorReadings command

It should be return all the composite sensors when set the sensorRearm
and reserved to 0.
When the sensorRearm property is set to 0, all composite sensors
should be returned.

Also, update the presentState property value.
s/PLDM_SENSOR_UNKNOWN/PLDM_SENSOR_NORMAL

Tested:
When the D-Bus object is not present, opState = PLDM_SENSOR_UNAVAILABLE
./pldmtool raw -v -d 0x80 0x02 0x21 0x01 0x00 0x01 0x00
Request Message:
08 01 80 02 21 01 00 01 00
Success in creating the socket : RC = 4
Success in connecting to socket : RC = 0
Success in sending message type as pldm to mctp : RC = 0
Write to socket successful : RC = 9
sd_bus_call: xyz.openbmc_project.Common.Error.ResourceNotFound: path or object not found
Total length:11
Shutdown Socket successful :  RC = 0
Response Message:
08 01 00 02 21 00 01 02 01 00 00

When the D-Bus object is present: opState = PLDM_SENSOR_ENABLED
/pldmtool raw -v -d 0x80 0x02 0x21 0x01 0x00 0x01 0x00
Request Message:
08 01 80 02 21 01 00 01 00
Success in creating the socket : RC = 4
Success in connecting to socket : RC = 0
Success in sending message type as pldm to mctp : RC = 0
Write to socket successful : RC = 9
Total length:11
Shutdown Socket successful :  RC = 0
Response Message:
08 01 00 02 21 00 01 00 01 00 01

Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I3513c469e87cf3a080d01a749eaf7f574c8cafd2