Upstream BIOS Attributes under oem extensions
- This commit would upstream all the bios attributes
that ibm machines use.
- These attributes will be copied onto the BMC when
it is compiled with oem-ibm flag enabled.
Tested By:
- meson builddir -Doem-ibm=enabled -Dprefix=<>
- ninja -C builddir
- ninja install
Post install step, was able to see all the bios attribute
jsons inside <prefix>/share/pldm/bios folder.
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: Iea030b773946298b26bbb26443ef4015f19ff37d
diff --git a/configurations/meson.build b/configurations/meson.build
index c7ddf0c..64180cb 100644
--- a/configurations/meson.build
+++ b/configurations/meson.build
@@ -17,6 +17,7 @@
if get_option('oem-ibm').enabled()
install_subdir('../oem/ibm/configurations/fru', install_dir: packagedir)
install_subdir('../oem/ibm/configurations/events', install_dir: packagedir)
+ install_subdir('../oem/ibm/configurations/bios', install_dir: packagedir)
install_data('../oem/ibm/configurations/fileTable.json',
install_dir: packagedir)
install_data('../oem/ibm/configurations/host_eid', install_dir: packagedir)
diff --git a/oem/ibm/configurations/bios/enum_attrs.json b/oem/ibm/configurations/bios/enum_attrs.json
new file mode 100644
index 0000000..644902a
--- /dev/null
+++ b/oem/ibm/configurations/bios/enum_attrs.json
@@ -0,0 +1,174 @@
+{
+ "entries":[
+ {
+ "attribute_name":"pvm_fw_boot_side",
+ "possible_values":[
+ "Perm",
+ "Temp"
+ ],
+ "default_values":[
+ "Temp"
+ ],
+ "helpText" : "pvm_fw_boot_side",
+ "displayName" : "pvm_fw_boot_side"
+ },
+ {
+ "attribute_name":"pvm_os_boot_side",
+ "possible_values":[
+ "Perm",
+ "Temp"
+ ],
+ "default_values":[
+ "Temp"
+ ],
+ "helpText" : "pvm_os_boot_side",
+ "displayName" : "pvm_os_boot_side"
+ },
+ {
+ "attribute_name":"pvm_inband_code_update",
+ "possible_values":[
+ "Allowed",
+ "Not Allowed"
+ ],
+ "default_values":[
+ "Allowed"
+ ],
+ "helpText" : "pvm_inband_code_update",
+ "displayName" : "pvm_inband_code_update"
+ },
+ {
+ "attribute_name":"pvm_surveillance",
+ "possible_values":[
+ "Disabled",
+ "Enabled"
+ ],
+ "default_values":[
+ "Enabled"
+ ],
+ "helpText" : "pvm_surveillance",
+ "displayName" : "pvm_surveillance"
+ },
+ {
+ "attribute_name":"pvm_pcie_error_inject",
+ "possible_values":[
+ "Disabled",
+ "Enabled"
+ ],
+ "default_values":[
+ "Enabled"
+ ],
+ "helpText" : "pvm_pcie_error_inject",
+ "displayName" : "pvm_pcie_error_inject"
+ },
+ {
+ "attribute_name":"vmi_if0_ipv4_method",
+ "possible_values":[
+ "IPv4Static",
+ "IPv4DHCP"
+ ],
+ "default_values":[
+ "IPv4Static"
+ ],
+ "helpText" : "vmi_if0_ipv4_method",
+ "displayName" : "vmi_if0_ipv4_method"
+ },
+ {
+ "attribute_name":"vmi_if1_ipv4_method",
+ "possible_values":[
+ "IPv4Static",
+ "IPv4DHCP"
+ ],
+ "default_values":[
+ "IPv4Static"
+ ],
+ "helpText" : "vmi_if1_ipv4_method",
+ "displayName" : "vmi_if1_ipv4_method"
+ },
+ {
+ "attribute_name":"hb_hyp_switch",
+ "possible_values":[
+ "PowerVM",
+ "OPAL"
+ ],
+ "default_values":[
+ "PowerVM"
+ ],
+ "helpText" : "hb_hyp_switch",
+ "displayName" : "hb_hyp_switch"
+ },
+ {
+ "attribute_name":"pvm_stop_at_standby",
+ "possible_values":[
+ "Disabled",
+ "Enabled"
+ ],
+ "default_values":[
+ "Disabled"
+ ],
+ "helpText" : "pvm_stop_at_standby",
+ "displayName" : "pvm_stop_at_standby"
+ },
+ {
+ "attribute_name":"hb_debug_console",
+ "possible_values":[
+ "Disabled",
+ "Enabled"
+ ],
+ "default_values":[
+ "Disabled"
+ ],
+ "helpText" : "When set to Enabled Hostboot should emit debug trace information to the VUART2 device.",
+ "displayName" : "hb-debug-console"
+ },
+ {
+ "attribute_name":"pvm_system_power_off_policy",
+ "possible_values":[
+ "Power Off",
+ "Stay On",
+ "Automatic"
+ ],
+ "default_values":[
+ "Automatic"
+ ],
+ "helpText" : "The system power off policy flag is a system parameter that controls the system's behavior when the last partition (or only partition in the case of a system that is not managed by an HMC) is powered off.",
+ "displayName" : "System Automatic Power Off Policy"
+ },
+ {
+ "attribute_name":"pvm_hmc_managed",
+ "possible_values":[
+ "Disabled",
+ "Enabled"
+ ],
+ "default_values":[
+ "Disabled"
+ ],
+ "helpText" : "This option enables or disables the system is managed by HMC.",
+ "displayName" : "HMC managed System"
+ },
+ {
+ "attribute_name":"pvm_rtad",
+ "possible_values":[
+ "Disabled",
+ "Enabled"
+ ],
+ "default_values":[
+ "Enabled"
+ ],
+ "helpText" : "This option enables or disables the Remote Trusted Attestation Daemon for host firmware.",
+ "displayName" : "Remote Trusted Attestation Daemon State"
+ },
+ {
+ "attribute_name":"pvm_default_os_type",
+ "possible_values":[
+ "AIX",
+ "Linux",
+ "IBM I"
+ ],
+ "default_values":[
+ "AIX"
+ ],
+ "helpText" : "CEC Primary OS",
+ "displayName" : "CEC Primary OS"
+ }
+ ]
+}
diff --git a/oem/ibm/configurations/bios/integer_attrs.json b/oem/ibm/configurations/bios/integer_attrs.json
new file mode 100644
index 0000000..1c666e2
--- /dev/null
+++ b/oem/ibm/configurations/bios/integer_attrs.json
@@ -0,0 +1,31 @@
+{
+ "entries":[
+ {
+ "attribute_name" : "vmi_if_count",
+ "lower_bound" : 0,
+ "upper_bound" : 2,
+ "scalar_increment" : 1,
+ "default_value" : 1,
+ "helpText" : "vmi_if_count",
+ "displayName" : "vmi_if_count"
+ },
+ {
+ "attribute_name" : "vmi_if0_ipv4_prefix_length",
+ "lower_bound" : 0,
+ "upper_bound" : 32,
+ "scalar_increment" : 1,
+ "default_value" : 0,
+ "helpText" : "vmi_if0_ipv4_prefix_length",
+ "displayName" : "vmi_if0_ipv4_prefix_length"
+ },
+ {
+ "attribute_name" : "vmi_if1_ipv4_prefix_length",
+ "lower_bound" : 0,
+ "upper_bound" : 32,
+ "scalar_increment" : 1,
+ "default_value" : 0,
+ "helpText" : "vmi_if1_ipv4_prefix_length",
+ "displayName" : "vmi_if1_ipv4_prefix_length"
+ }
+ ]
+}
diff --git a/oem/ibm/configurations/bios/string_attrs.json b/oem/ibm/configurations/bios/string_attrs.json
new file mode 100644
index 0000000..9dc6a22
--- /dev/null
+++ b/oem/ibm/configurations/bios/string_attrs.json
@@ -0,0 +1,64 @@
+{
+ "entries":[
+ {
+ "attribute_name" : "pvm_system_name",
+ "string_type" : "ASCII",
+ "minimum_string_length" : 0,
+ "maximum_string_length" : 100,
+ "default_string_length" : 0,
+ "default_string" : "",
+ "helpText" : "pvm_system_name",
+ "displayName" : "pvm_system_name"
+ },
+ {
+ "attribute_name" : "vmi_hostname",
+ "string_type" : "ASCII",
+ "minimum_string_length" : 0,
+ "maximum_string_length" : 255,
+ "default_string_length" : 0,
+ "default_string" : "",
+ "helpText" : "vmi_hostname",
+ "displayName" : "vmi_hostname"
+ },
+ {
+ "attribute_name" : "vmi_if0_ipv4_gateway",
+ "string_type" : "ASCII",
+ "minimum_string_length" : 7,
+ "maximum_string_length" : 15,
+ "default_string_length" : 7,
+ "default_string" : "0.0.0.0",
+ "helpText" : "vmi_if0_ipv4_gateway",
+ "displayName" : "vmi_if0_ipv4_gateway"
+ },
+ {
+ "attribute_name" : "vmi_if1_ipv4_gateway",
+ "string_type" : "ASCII",
+ "minimum_string_length" : 7,
+ "maximum_string_length" : 15,
+ "default_string_length" : 7,
+ "default_string" : "0.0.0.0",
+ "helpText" : "vmi_if1_ipv4_gateway",
+ "displayName" : "vmi_if1_ipv4_gateway"
+ },
+ {
+ "attribute_name" : "vmi_if0_ipv4_ipaddr",
+ "string_type" : "ASCII",
+ "minimum_string_length" : 7,
+ "maximum_string_length" : 15,
+ "default_string_length" : 7,
+ "default_string" : "0.0.0.0",
+ "helpText" : "vmi_if0_ipv4_ipaddr",
+ "displayName" : "vmi_if0_ipv4_ipaddr"
+ },
+ {
+ "attribute_name" : "vmi_if1_ipv4_ipaddr",
+ "string_type" : "ASCII",
+ "minimum_string_length" : 7,
+ "maximum_string_length" : 15,
+ "default_string_length" : 7,
+ "default_string" : "0.0.0.0",
+ "helpText" : "vmi_if1_ipv4_ipaddr",
+ "displayName" : "vmi_if1_ipv4_ipaddr"
+ }
+ ]
+}