configs: Add POWER_CONFIG for machines
Add configs that address differences in naming, polarity, and number of
GPIOs used to control power sequencing and standby reset holds.
These are based on existing per-machine patches to op-pwrctl.
Signed-off-by: Xo Wang <xow@google.com>
Change-Id: I9b1b076cda58899bec466f94ae8a9c87f9ed4124
diff --git a/configs/Barreleye.py b/configs/Barreleye.py
index 0273c4b..4b6a15c 100644
--- a/configs/Barreleye.py
+++ b/configs/Barreleye.py
@@ -540,6 +540,17 @@
},
}
+POWER_CONFIG = {
+ 'power_good_in' : 'PGOOD',
+ 'power_up_outs' : [
+ ('POWER_PIN', False),
+ ],
+ 'reset_outs' : [
+ ('PCIE_RESET', False),
+ ('USB_RESET', False),
+ ],
+}
+
# Miscellaneous non-poll sensor with system specific properties.
# The sensor id is the same as those defined in ID_LOOKUP['SENSOR'].
MISC_SENSORS = {
diff --git a/configs/Firestone.py b/configs/Firestone.py
index 0f28515..0b7eb17 100644
--- a/configs/Firestone.py
+++ b/configs/Firestone.py
@@ -451,6 +451,22 @@
}
+POWER_CONFIG = {
+ 'power_good_in' : 'SYS_PWROK_BUFF',
+ 'power_up_outs' : [
+ ('BMC_POWER_UP', True),
+ ],
+ 'reset_outs' : [
+ ('CM1_OE_R_N', True),
+ ('BMC_CP0_RESET_N', False),
+ ('BMC_CFAM_RESET_N_R', False),
+ ('PEX8718_DEVICES_RESET_N', False),
+ ('CP0_DEVICES_RESET_N', False),
+ ('CP1_DEVICES_RESET_N', False),
+ ],
+}
+
+
# Miscellaneous non-poll sensor with system specific properties.
# The sensor id is the same as those defined in ID_LOOKUP['SENSOR'].
MISC_SENSORS = {
diff --git a/configs/Garrison.py b/configs/Garrison.py
index 133bad8..8d29750 100644
--- a/configs/Garrison.py
+++ b/configs/Garrison.py
@@ -451,6 +451,23 @@
},
}
+
+POWER_CONFIG = {
+ 'power_good_in' : 'SYS_PWROK_BUFF',
+ 'power_up_outs' : [
+ ('BMC_POWER_UP', True),
+ ],
+ 'reset_outs' : [
+ ('CM1_OE_R_N', True),
+ ('BMC_CP0_RESET_N', False),
+ ('BMC_CFAM_RESET_N_R', False),
+ ('PEX8718_DEVICES_RESET_N', False),
+ ('CP0_DEVICES_RESET_N', False),
+ ('CP1_DEVICES_RESET_N', False),
+ ],
+}
+
+
# Miscellaneous non-poll sensor with system specific properties.
# The sensor id is the same as those defined in ID_LOOKUP['SENSOR'].
MISC_SENSORS = {
diff --git a/configs/Palmetto.py b/configs/Palmetto.py
index 98a04d2..8abe4fe 100644
--- a/configs/Palmetto.py
+++ b/configs/Palmetto.py
@@ -125,6 +125,17 @@
}
}
+POWER_CONFIG = {
+ 'power_good_in' : 'PGOOD',
+ 'power_up_outs' : [
+ ('POWER_PIN', False),
+ ],
+ 'reset_outs' : [
+ ('PCIE_RESET', False),
+ ('USB_RESET', False),
+ ],
+}
+
# Miscellaneous non-poll sensor with system specific properties.
# The sensor id is the same as those defined in ID_LOOKUP['SENSOR'].
MISC_SENSORS = {
diff --git a/configs/Witherspoon.py b/configs/Witherspoon.py
index 7aee81a..27fc88f 100644
--- a/configs/Witherspoon.py
+++ b/configs/Witherspoon.py
@@ -477,6 +477,17 @@
},
}
+
+POWER_CONFIG = {
+ 'power_good_in' : 'SYS_PWROK_BUFF',
+ 'power_up_outs' : [
+ ('BMC_POWER_UP', True),
+ ],
+ 'reset_outs' : [
+ ],
+}
+
+
# Miscellaneous non-poll sensor with system specific properties.
# The sensor id is the same as those defined in ID_LOOKUP['SENSOR'].
MISC_SENSORS = {