diff --git a/op-pwrctl/Makefile b/op-pwrctl/Makefile
new file mode 100644
index 0000000..b1188ae
--- /dev/null
+++ b/op-pwrctl/Makefile
@@ -0,0 +1,3 @@
+BINS=power_control
+include ../gdbus.mk
+include ../rules.mk
diff --git a/op-pwrctl/power_control_obj.c b/op-pwrctl/power_control_obj.c
new file mode 100644
index 0000000..85a8cff
--- /dev/null
+++ b/op-pwrctl/power_control_obj.c
@@ -0,0 +1,309 @@
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+#include <syslog.h>
+#include "interfaces/openbmc_intf.h"
+#include "openbmc.h"
+#include "gpio.h"
+
+/* ------------------------------------------------------------------------- */
+static const gchar* dbus_object_path = "/org/openbmc/control";
+static const gchar* instance_name = "power0";
+static const gchar* dbus_name = "org.openbmc.control.Power";
+
+//This object will use these GPIOs
+GPIO power_pin    = (GPIO){ "POWER_PIN" };
+GPIO pgood        = (GPIO){ "PGOOD" };
+GPIO usb_reset    = (GPIO){ "USB_RESET" };
+GPIO pcie_reset   = (GPIO){ "PCIE_RESET" };
+
+
+static GDBusObjectManagerServer *manager = NULL;
+
+time_t pgood_timeout_start = 0;
+
+// TODO:  Change to interrupt driven instead of polling
+static gboolean
+poll_pgood(gpointer user_data)
+{
+	ControlPower *control_power = object_get_control_power((Object*)user_data);
+	Control* control = object_get_control((Object*)user_data);
+
+	//send the heartbeat
+	guint poll_int = control_get_poll_interval(control);
+	if(poll_int == 0)
+	{
+		printf("ERROR PowerControl: Poll interval cannot be 0\n");
+		return FALSE;
+	}
+	//handle timeout
+	time_t current_time = time(NULL);
+	if(difftime(current_time,pgood_timeout_start) > control_power_get_pgood_timeout(control_power)
+			&& pgood_timeout_start != 0)
+	{
+		printf("ERROR PowerControl: Pgood poll timeout\n");
+		// set timeout to 0 so timeout doesn't happen again
+		control_power_set_pgood_timeout(control_power,0);
+		pgood_timeout_start = 0;
+		return TRUE;
+	}
+	uint8_t gpio;
+
+	int rc = gpio_open(&pgood);
+	rc = gpio_read(&pgood,&gpio);
+	gpio_close(&pgood);
+	if(rc == GPIO_OK)
+	{
+		//if changed, set property and emit signal
+		if(gpio != control_power_get_pgood(control_power))
+		{
+			control_power_set_pgood(control_power,gpio);
+			if(gpio==0)
+			{
+				control_power_emit_power_lost(control_power);
+				control_emit_goto_system_state(control,"HOST_POWERED_OFF");
+				rc = gpio_open(&pcie_reset);
+				rc = gpio_write(&pcie_reset,0);
+				gpio_close(&pcie_reset);
+
+				rc = gpio_open(&usb_reset);
+				rc = gpio_write(&usb_reset,0);
+				gpio_close(&usb_reset);
+
+			}
+			else
+			{
+				control_power_emit_power_good(control_power);
+				control_emit_goto_system_state(control,"HOST_POWERED_ON");
+				rc = gpio_open(&pcie_reset);
+				rc = gpio_write(&pcie_reset,1);
+				gpio_close(&pcie_reset);
+
+				rc = gpio_open(&usb_reset);
+				rc = gpio_write(&usb_reset,1);
+				gpio_close(&usb_reset);
+			}
+		}
+	} else {
+		printf("ERROR PowerControl: GPIO read error (gpio=%s,rc=%d)\n",pgood.name,rc);
+		//return false so poll won't get called anymore
+		return FALSE;
+	}
+	//pgood is not at desired state yet
+	if(gpio != control_power_get_state(control_power) &&
+			control_power_get_pgood_timeout(control_power) > 0)
+	{
+		if(pgood_timeout_start == 0 ) {
+			pgood_timeout_start = current_time;
+		}
+	}
+	else
+	{
+		pgood_timeout_start = 0;
+	}
+	return TRUE;
+}
+
+static gboolean
+on_set_power_state(ControlPower *pwr,
+		GDBusMethodInvocation *invocation,
+		guint state,
+		gpointer user_data)
+{
+	Control* control = object_get_control((Object*)user_data);
+	if(state > 1)
+	{
+		g_dbus_method_invocation_return_dbus_error(invocation,
+				"org.openbmc.ControlPower.Error.Failed",
+				"Invalid power state");
+		return TRUE;
+	}
+	// return from method call
+	control_power_complete_set_power_state(pwr,invocation);
+	if(state == control_power_get_state(pwr))
+	{
+		g_print("Power already at requested state: %d\n",state);
+	}
+	else
+	{
+		int error = 0;
+		do {
+			if(state == 1) {
+				control_emit_goto_system_state(control,"HOST_POWERING_ON");
+			} else {
+				control_emit_goto_system_state(control,"HOST_POWERING_OFF");
+			}
+			error = gpio_open(&power_pin);
+			if(error != GPIO_OK) { break;	}
+			error = gpio_write(&power_pin,!state);
+			if(error != GPIO_OK) { break;	}
+			gpio_close(&power_pin);
+			control_power_set_state(pwr,state);
+		} while(0);
+		if(error != GPIO_OK)
+		{
+			printf("ERROR PowerControl: GPIO set power state (rc=%d)\n",error);
+		}
+	}
+	return TRUE;
+}
+
+static gboolean
+on_init(Control *control,
+		GDBusMethodInvocation *invocation,
+		gpointer user_data)
+{
+	pgood_timeout_start = 0;
+	//guint poll_interval = control_get_poll_interval(control);
+	//g_timeout_add(poll_interval, poll_pgood, user_data);
+	control_complete_init(control,invocation);
+	return TRUE;
+}
+
+static gboolean
+on_get_power_state(ControlPower *pwr,
+		GDBusMethodInvocation *invocation,
+		gpointer user_data)
+{
+	guint pgood = control_power_get_pgood(pwr);
+	control_power_complete_get_power_state(pwr,invocation,pgood);
+	return TRUE;
+}
+
+static void
+on_bus_acquired(GDBusConnection *connection,
+		const gchar *name,
+		gpointer user_data)
+{
+	ObjectSkeleton *object;
+	cmdline *cmd = user_data;
+	if(cmd->argc < 3)
+	{
+		g_print("Usage: power_control.exe [poll interval] [timeout]\n");
+		return;
+	}
+	manager = g_dbus_object_manager_server_new(dbus_object_path);
+	gchar *s;
+	s = g_strdup_printf("%s/%s",dbus_object_path,instance_name);
+	object = object_skeleton_new(s);
+	g_free(s);
+
+	ControlPower* control_power = control_power_skeleton_new();
+	object_skeleton_set_control_power(object, control_power);
+	g_object_unref(control_power);
+
+	Control* control = control_skeleton_new();
+	object_skeleton_set_control(object, control);
+	g_object_unref(control);
+
+	//define method callbacks here
+	g_signal_connect(control_power,
+			"handle-set-power-state",
+			G_CALLBACK(on_set_power_state),
+			object); /* user_data */
+
+	g_signal_connect(control_power,
+			"handle-get-power-state",
+			G_CALLBACK(on_get_power_state),
+			NULL); /* user_data */
+
+	g_signal_connect(control,
+			"handle-init",
+			G_CALLBACK(on_init),
+			object); /* user_data */
+
+
+	/* Export the object (@manager takes its own reference to @object) */
+	g_dbus_object_manager_server_set_connection(manager, connection);
+	g_dbus_object_manager_server_export(manager, G_DBUS_OBJECT_SKELETON(object));
+	g_object_unref(object);
+
+	// get gpio device paths
+	int rc = GPIO_OK;
+	do {
+		rc = gpio_init(connection,&power_pin);
+		if(rc != GPIO_OK) { break; }
+		rc = gpio_init(connection,&pgood);
+		if(rc != GPIO_OK) { break; }
+		rc = gpio_init(connection,&pcie_reset);
+		if(rc != GPIO_OK) { break; }
+		rc = gpio_init(connection,&usb_reset);
+		if(rc != GPIO_OK) { break; }
+
+		uint8_t gpio;
+		rc = gpio_open(&pgood);
+		if(rc != GPIO_OK) { break; }
+		rc = gpio_read(&pgood,&gpio);
+		if(rc != GPIO_OK) { break; }
+		gpio_close(&pgood);
+		control_power_set_pgood(control_power,gpio);
+		control_power_set_state(control_power,gpio);
+		printf("Pgood state: %d\n",gpio);
+
+	} while(0);
+	if(rc != GPIO_OK)
+	{
+		printf("ERROR PowerControl: GPIO setup (rc=%d)\n",rc);
+	}
+	//start poll
+	pgood_timeout_start = 0;
+	int poll_interval = atoi(cmd->argv[1]);
+	int pgood_timeout = atoi(cmd->argv[2]);
+	if(poll_interval < 1000 || pgood_timeout <5) {
+		printf("ERROR PowerControl: poll_interval < 1000 or pgood_timeout < 5\n");
+	} else {
+		control_set_poll_interval(control,poll_interval);
+		control_power_set_pgood_timeout(control_power,pgood_timeout);
+		g_timeout_add(poll_interval, poll_pgood, object);
+	}
+}
+
+static void
+on_name_acquired(GDBusConnection *connection,
+		const gchar *name,
+		gpointer user_data)
+{
+}
+
+static void
+on_name_lost(GDBusConnection *connection,
+		const gchar *name,
+		gpointer user_data)
+{
+}
+
+/*----------------------------------------------------------------*/
+/* Main Event Loop                                                */
+
+gint
+main(gint argc, gchar *argv[])
+{
+	GMainLoop *loop;
+	cmdline cmd;
+	cmd.argc = argc;
+	cmd.argv = argv;
+
+	guint id;
+	loop = g_main_loop_new(NULL, FALSE);
+
+	id = g_bus_own_name(DBUS_TYPE,
+			dbus_name,
+			G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT |
+			G_BUS_NAME_OWNER_FLAGS_REPLACE,
+			on_bus_acquired,
+			on_name_acquired,
+			on_name_lost,
+			&cmd,
+			NULL);
+
+	g_main_loop_run(loop);
+
+	g_bus_unown_name(id);
+	g_main_loop_unref(loop);
+	return 0;
+}