diff --git a/objects/button_power_obj.c b/objects/button_power_obj.c
index 94f8922..f9a2b09 100644
--- a/objects/button_power_obj.c
+++ b/objects/button_power_obj.c
@@ -1,178 +1,177 @@
-#include <stdio.h>
-#include "interfaces/openbmc_intf.h"
-#include "gpio.h"
-#include "openbmc.h"
-#include "object_mapper.h"
-
-/* ---------------------------------------------------------------------------------------------------- */
-static const gchar* dbus_object_path = "/org/openbmc/buttons";
-static const gchar* instance_name = "power0";
-static const gchar* dbus_name        = "org.openbmc.buttons.Power";
-static const int LONG_PRESS_SECONDS = 3;
-static GDBusObjectManagerServer *manager = NULL;
-
-//This object will use these GPIOs
-GPIO gpio_button    = (GPIO){ "POWER_BUTTON" };
-
-static gboolean
-on_is_on       (Button          *btn,
-                GDBusMethodInvocation  *invocation,
-                gpointer                user_data)
-{
-  gboolean btn_state=button_get_state(btn);
-  button_complete_is_on(btn,invocation,btn_state);
-  return TRUE;
-
-}
-
-static gboolean
-on_button_press       (Button          *btn,
-                GDBusMethodInvocation  *invocation,
-                gpointer                user_data)
-{
-	button_emit_pressed(btn);
-	button_complete_sim_press(btn,invocation);
-	return TRUE;
-}
-static gboolean
-on_button_interrupt( GIOChannel *channel,
-               GIOCondition condition,
-               gpointer user_data )
-{
-
-	GError *error = 0;
-	gsize bytes_read = 0;
-	gchar buf[2]; 
-	buf[1] = '\0';
-	g_io_channel_seek_position( channel, 0, G_SEEK_SET, 0 );
-	GIOStatus rc = g_io_channel_read_chars( channel,
-                                            buf, 1,
-                                            &bytes_read,
-                                            &error );
-	printf("%s\n",buf);
-	
-	time_t current_time = time(NULL);
-	if (gpio_button.irq_inited)
-	{
-		Button* button = object_get_button((Object*)user_data);
-		if (buf[0] == '0')
-		{
-			printf("Power Button pressed\n");
-			button_emit_pressed(button);
-			button_set_timer(button,(long)current_time);
-		}
-		else
-		{
-			long press_time = current_time-button_get_timer(button);
-			printf("Power Button released, held for %ld seconds\n",press_time);
-			if (press_time > LONG_PRESS_SECONDS)
-			{
-				button_emit_pressed_long(button);
-			} else {
-				button_emit_released(button);
-			}
-		}
-	} 
-	else { gpio_button.irq_inited = true; }
-
-	return TRUE;
-}
-static void 
-on_bus_acquired (GDBusConnection *connection,
-                 const gchar     *name,
-                 gpointer         user_data)
-{
-	ObjectSkeleton *object;
-	//g_print ("Acquired a message bus connection: %s\n",name);
- 	cmdline *cmd = user_data;
-  	manager = g_dbus_object_manager_server_new (dbus_object_path);
-  	int i=0;
-	gchar *s;
-	s = g_strdup_printf ("%s/%s",dbus_object_path,instance_name);
-	object = object_skeleton_new (s);
-	g_free (s);
-
-	Button* button = button_skeleton_new ();
-	object_skeleton_set_button (object, button);
-	g_object_unref (button);
-
-	ObjectMapper* mapper = object_mapper_skeleton_new ();
-	object_skeleton_set_object_mapper (object, mapper);
-	g_object_unref (mapper);
-
-	//define method callbacks
-	g_signal_connect (button,
-                   "handle-is-on",
-                   G_CALLBACK (on_is_on),
-                   NULL); /* user_data */
-	g_signal_connect (button,
-                    "handle-sim-press",
-                    G_CALLBACK (on_button_press),
-                    NULL); /* user_data */
-
-		
-	/* Export the object (@manager takes its own reference to @object) */
-	g_dbus_object_manager_server_export (manager, G_DBUS_OBJECT_SKELETON (object));
-	g_object_unref (object);
-
-	/* Export all objects */
-	g_dbus_object_manager_server_set_connection (manager, connection);
-
-	// get gpio device paths
-	int rc = GPIO_OK;
-	do {
-		rc = gpio_init(connection,&gpio_button);
-		if (rc != GPIO_OK) { break; }
-		rc = gpio_open_interrupt(&gpio_button,on_button_interrupt,object);
-		if (rc != GPIO_OK) { break; }
-	} while(0);
-	if (rc != GPIO_OK)
-	{
-		printf("ERROR PowerButton: GPIO setup (rc=%d)\n",rc);
-	}
-	emit_object_added((GDBusObjectManager*)manager); 
-}
-
-static void
-on_name_acquired (GDBusConnection *connection,
-                  const gchar     *name,
-                  gpointer         user_data)
-{
-}
-
-static void
-on_name_lost (GDBusConnection *connection,
-              const gchar     *name,
-              gpointer         user_data)
-{
-}
-
-
-gint
-main (gint argc, gchar *argv[])
-{
-  GMainLoop *loop;
-
-  cmdline cmd;
-  cmd.argc = argc;
-  cmd.argv = argv;
-
-  guint id;
-  loop = g_main_loop_new (NULL, FALSE);
-
-  id = g_bus_own_name (DBUS_TYPE,
-                       dbus_name,
-                       G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT |
-                       G_BUS_NAME_OWNER_FLAGS_REPLACE,
-                       on_bus_acquired,
-                       on_name_acquired,
-                       on_name_lost,
-                       &cmd,
-                       NULL);
-
-  g_main_loop_run (loop);
-  
-  g_bus_unown_name (id);
-  g_main_loop_unref (loop);
-  return 0;
-}
+#include <stdio.h>
+#include "interfaces/openbmc_intf.h"
+#include "gpio.h"
+#include "openbmc.h"
+#include "object_mapper.h"
+
+/* ------------------------------------------------------------------------- */
+static const gchar* dbus_object_path = "/org/openbmc/buttons";
+static const gchar* instance_name = "power0";
+static const gchar* dbus_name = "org.openbmc.buttons.Power";
+static const int LONG_PRESS_SECONDS = 3;
+static GDBusObjectManagerServer *manager = NULL;
+
+//This object will use these GPIOs
+GPIO gpio_button = (GPIO){ "POWER_BUTTON" };
+
+static gboolean
+on_is_on(Button *btn,
+		GDBusMethodInvocation *invocation,
+		gpointer user_data)
+{
+	gboolean btn_state=button_get_state(btn);
+	button_complete_is_on(btn,invocation,btn_state);
+	return TRUE;
+}
+
+static gboolean
+on_button_press(Button *btn,
+		GDBusMethodInvocation *invocation,
+		gpointer user_data)
+{
+	button_emit_pressed(btn);
+	button_complete_sim_press(btn,invocation);
+	return TRUE;
+}
+
+static gboolean
+on_button_interrupt( GIOChannel *channel,
+		GIOCondition condition,
+		gpointer user_data )
+{
+	GError *error = 0;
+	gsize bytes_read = 0;
+	gchar buf[2];
+	buf[1] = '\0';
+	g_io_channel_seek_position( channel, 0, G_SEEK_SET, 0 );
+	GIOStatus rc = g_io_channel_read_chars( channel,
+			buf, 1,
+			&bytes_read,
+			&error );
+	printf("%s\n",buf);
+
+	time_t current_time = time(NULL);
+	if(gpio_button.irq_inited)
+	{
+		Button* button = object_get_button((Object*)user_data);
+		if(buf[0] == '0')
+		{
+			printf("Power Button pressed\n");
+			button_emit_pressed(button);
+			button_set_timer(button,(long)current_time);
+		}
+		else
+		{
+			long press_time = current_time-button_get_timer(button);
+			printf("Power Button released, held for %ld seconds\n",press_time);
+			if(press_time > LONG_PRESS_SECONDS)
+			{
+				button_emit_pressed_long(button);
+			} else {
+				button_emit_released(button);
+			}
+		}
+	}
+	else { gpio_button.irq_inited = true; }
+
+	return TRUE;
+}
+
+static void
+on_bus_acquired(GDBusConnection *connection,
+		const gchar *name,
+		gpointer user_data)
+{
+	ObjectSkeleton *object;
+	//g_print ("Acquired a message bus connection: %s\n",name);
+	cmdline *cmd = user_data;
+	manager = g_dbus_object_manager_server_new(dbus_object_path);
+	int i=0;
+	gchar *s;
+	s = g_strdup_printf("%s/%s",dbus_object_path,instance_name);
+	object = object_skeleton_new(s);
+	g_free(s);
+
+	Button* button = button_skeleton_new();
+	object_skeleton_set_button(object, button);
+	g_object_unref(button);
+
+	ObjectMapper* mapper = object_mapper_skeleton_new();
+	object_skeleton_set_object_mapper(object, mapper);
+	g_object_unref(mapper);
+
+	//define method callbacks
+	g_signal_connect(button,
+			"handle-is-on",
+			G_CALLBACK(on_is_on),
+			NULL); /* user_data */
+	g_signal_connect(button,
+			"handle-sim-press",
+			G_CALLBACK(on_button_press),
+			NULL); /* user_data */
+
+
+	/* Export the object (@manager takes its own reference to @object) */
+	g_dbus_object_manager_server_export(manager, G_DBUS_OBJECT_SKELETON(object));
+	g_object_unref(object);
+
+	/* Export all objects */
+	g_dbus_object_manager_server_set_connection(manager, connection);
+
+	// get gpio device paths
+	int rc = GPIO_OK;
+	do {
+		rc = gpio_init(connection,&gpio_button);
+		if(rc != GPIO_OK) { break; }
+		rc = gpio_open_interrupt(&gpio_button,on_button_interrupt,object);
+		if(rc != GPIO_OK) { break; }
+	} while(0);
+	if(rc != GPIO_OK)
+	{
+		printf("ERROR PowerButton: GPIO setup (rc=%d)\n",rc);
+	}
+	emit_object_added((GDBusObjectManager*)manager);
+}
+
+static void
+on_name_acquired(GDBusConnection *connection,
+		const gchar *name,
+		gpointer user_data)
+{
+}
+
+static void
+on_name_lost(GDBusConnection *connection,
+		const gchar *name,
+		gpointer user_data)
+{
+}
+
+gint
+main(gint argc, gchar *argv[])
+{
+	GMainLoop *loop;
+
+	cmdline cmd;
+	cmd.argc = argc;
+	cmd.argv = argv;
+
+	guint id;
+	loop = g_main_loop_new(NULL, FALSE);
+
+	id = g_bus_own_name(DBUS_TYPE,
+			dbus_name,
+			G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT |
+			G_BUS_NAME_OWNER_FLAGS_REPLACE,
+			on_bus_acquired,
+			on_name_acquired,
+			on_name_lost,
+			&cmd,
+			NULL);
+
+	g_main_loop_run(loop);
+
+	g_bus_unown_name(id);
+	g_main_loop_unref(loop);
+	return 0;
+}