diff --git a/objects/control_bmc_barreleye.c b/objects/control_bmc_barreleye.c
index cd6ae3a..ec7bc2a 100644
--- a/objects/control_bmc_barreleye.c
+++ b/objects/control_bmc_barreleye.c
@@ -73,13 +73,19 @@
 	devmem(bmcreg+0x00,0x00000000);  //Set Baud rate divisor -> 13 (Baud 115200)
 	devmem(bmcreg+0x04,0x00000000);  //Set Baud rate divisor -> 13 (Baud 115200)
 	devmem(bmcreg+0x08,0x000000c1);  //Disable Parity, 1 stop bit, 8 bits
-	//bmcreg = memmap(mem_fd,COM_BASE);
-	//devmem(bmcreg+0x9C,0x08060000);  //Set UART routing
+	bmcreg = memmap(mem_fd,COM_BASE);
+	devmem(bmcreg+0x9C,0x00000000);  //Set UART routing
 
 	bmcreg = memmap(mem_fd,SCU_BASE);
-	devmem(bmcreg+0x00,0x9f82fce7);
+	devmem(bmcreg+0x00,0x9e82fce7);
+	//devmem(bmcreg+0x00,0x9f82fce7); // B2?
 	devmem(bmcreg+0x04,0x0370e677);
-	devmem(bmcreg+0x20,0xcfc8f7ff);
+	
+	// do not modify state of power pin, otherwise 
+	// if this is a reboot, host will shutdown
+	uint32_t reg_20 = devmem_read(bmcreg+0x20);
+	reg_20 = reg_20 & 0x00000002;	
+	devmem(bmcreg+0x20,0xcfc8f7fd | reg_20);
 	devmem(bmcreg+0x24,0xc738f20a);
 	devmem(bmcreg+0x80,0x0031ffaf);
 
@@ -150,6 +156,7 @@
 	Control* control = object_get_control((Object*)cmd->user_data);
 	#ifdef __arm__
 	reg_init();
+
 	init_i2c_driver(6,"nct7904",0x2d,false);
 	init_i2c_driver(6,"nct7904",0x2d,true);
 	init_i2c_driver(6,"nct7904",0x2d,false);
diff --git a/objects/pflash/ast-sf-ctrl.c b/objects/pflash/ast-sf-ctrl.c
index b154682..bf5d372 100644
--- a/objects/pflash/ast-sf-ctrl.c
+++ b/objects/pflash/ast-sf-ctrl.c
@@ -1,830 +1,923 @@
-#include <stdint.h>
-#include <stdbool.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <stdio.h>
-#include <string.h>
-
-#include <libflash/libflash.h>
-#include <libflash/libflash-priv.h>
-
-#include "ast.h"
-
-#ifndef __unused
-#define __unused __attribute__((unused))
-#endif
-
-#define CALIBRATE_BUF_SIZE	16384
-
-struct ast_sf_ctrl {
-	/* We have 2 controllers, one for the BMC flash, one for the PNOR */
-	uint8_t			type;
-
-	/* Address and previous value of the ctrl register */
-	uint32_t		ctl_reg;
-
-	/* Control register value for normal commands */
-	uint32_t		ctl_val;
-
-	/* Control register value for (fast) reads */
-	uint32_t		ctl_read_val;
-
-	/* Flash read timing register  */
-	uint32_t		fread_timing_reg;
-	uint32_t		fread_timing_val;
-
-	/* Address of the flash mapping */
-	uint32_t		flash;
-
-	/* Current 4b mode */
-	bool			mode_4b;
-
-	/* Callbacks */
-	struct spi_flash_ctrl	ops;
-};
-
-static uint32_t ast_ahb_freq;
-
-static const uint32_t ast_ct_hclk_divs[] = {
-	0xf, /* HCLK */
-	0x7, /* HCLK/2 */
-	0xe, /* HCLK/3 */
-	0x6, /* HCLK/4 */
-	0xd, /* HCLK/5 */
-};
-
-static int ast_sf_start_cmd(struct ast_sf_ctrl *ct, uint8_t cmd)
-{
-	/* Switch to user mode, CE# dropped */
-	ast_ahb_writel(ct->ctl_val | 7, ct->ctl_reg);
-
-	/* user mode, CE# active */
-	ast_ahb_writel(ct->ctl_val | 3, ct->ctl_reg);
-
-	/* write cmd */
-	return ast_copy_to_ahb(ct->flash, &cmd, 1);
-}
-
-static void ast_sf_end_cmd(struct ast_sf_ctrl *ct)
-{
-	/* clear CE# */
-	ast_ahb_writel(ct->ctl_val | 7, ct->ctl_reg);
-
-	/* Switch back to read mode */
-	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
-}
-
-static int ast_sf_send_addr(struct ast_sf_ctrl *ct, uint32_t addr)
-{
-	const void *ap;
-
-	/* Layout address MSB first in memory */
-	addr = cpu_to_be32(addr);
-
-	/* Send the right amount of bytes */
-	ap = (char *)&addr;
-
-	if (ct->mode_4b)
-		return ast_copy_to_ahb(ct->flash, ap, 4);
-	else
-		return ast_copy_to_ahb(ct->flash, ap + 1, 3);
-}
-
-static int ast_sf_cmd_rd(struct spi_flash_ctrl *ctrl, uint8_t cmd,
-			 bool has_addr, uint32_t addr, void *buffer,
-			 uint32_t size)
-{
-	struct ast_sf_ctrl *ct = container_of(ctrl, struct ast_sf_ctrl, ops);
-	int rc;
-
-	rc = ast_sf_start_cmd(ct, cmd);
-	if (rc)
-		goto bail;
-	if (has_addr) {
-		rc = ast_sf_send_addr(ct, addr);
-		if (rc)
-			goto bail;
-	}
-	if (buffer && size)
-		rc = ast_copy_from_ahb(buffer, ct->flash, size);
- bail:
-	ast_sf_end_cmd(ct);
-	return rc;
-}
-
-static int ast_sf_cmd_wr(struct spi_flash_ctrl *ctrl, uint8_t cmd,
-			 bool has_addr, uint32_t addr, const void *buffer,
-			 uint32_t size)
-{
-	struct ast_sf_ctrl *ct = container_of(ctrl, struct ast_sf_ctrl, ops);
-	int rc;
-
-	rc = ast_sf_start_cmd(ct, cmd);
-	if (rc)
-		goto bail;
-	if (has_addr) {
-		rc = ast_sf_send_addr(ct, addr);
-		if (rc)
-			goto bail;
-	}
-	if (buffer && size)
-		rc = ast_copy_to_ahb(ct->flash, buffer, size);
- bail:
-	ast_sf_end_cmd(ct);
-	return rc;
-}
-
-static int ast_sf_set_4b(struct spi_flash_ctrl *ctrl, bool enable)
-{
-	struct ast_sf_ctrl *ct = container_of(ctrl, struct ast_sf_ctrl, ops);
-
-	if (ct->type != AST_SF_TYPE_PNOR)
-		return enable ? FLASH_ERR_4B_NOT_SUPPORTED : 0;
-
-	/*
-	 * We update the "old" value as well since when quitting
-	 * we don't restore the mode of the flash itself so we need
-	 * to leave the controller in a compatible setup
-	 */
-	if (enable) {
-		ct->ctl_val |= 0x2000;
-		ct->ctl_read_val |= 0x2000;
-	} else {
-		ct->ctl_val &= ~0x2000;
-		ct->ctl_read_val &= ~0x2000;
-	}
-	ct->mode_4b = enable;
-
-	/* Update read mode */
-	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
-
-	return 0;
-}
-
-static int ast_sf_read(struct spi_flash_ctrl *ctrl, uint32_t pos,
-		       void *buf, uint32_t len)
-{
-	struct ast_sf_ctrl *ct = container_of(ctrl, struct ast_sf_ctrl, ops);
-
-	/*
-	 * We are in read mode by default. We don't yet support fancy
-	 * things like fast read or X2 mode
-	 */
-	return ast_copy_from_ahb(buf, ct->flash + pos, len);
-}
-
-static void ast_get_ahb_freq(void)
-{
-	static const uint32_t cpu_freqs_24_48[] = {
-		384000000,
-		360000000,
-		336000000,
-		408000000
-	};
-	static const uint32_t cpu_freqs_25[] = {
-		400000000,
-		375000000,
-		350000000,
-		425000000
-	};
-	static const uint32_t ahb_div[] = { 1, 2, 4, 3 };
-	uint32_t strap, cpu_clk, div;
-
-	if (ast_ahb_freq)
-		return;
-
-	/* HW strapping gives us the CPU freq and AHB divisor */
-	strap = ast_ahb_readl(SCU_HW_STRAPPING);
-	if (strap & 0x00800000) {
-		FL_DBG("AST: CLKIN 25Mhz\n");
-		cpu_clk = cpu_freqs_25[(strap >> 8) & 3];
-	} else {
-		FL_DBG("AST: CLKIN 24/48Mhz\n");
-		cpu_clk = cpu_freqs_24_48[(strap >> 8) & 3];
-	}
-	FL_DBG("AST: CPU frequency: %d Mhz\n", cpu_clk / 1000000);
-	div = ahb_div[(strap >> 10) & 3];
-	ast_ahb_freq = cpu_clk / div;
-	FL_DBG("AST: AHB frequency: %d Mhz\n", ast_ahb_freq / 1000000);
-}
-
-static int ast_sf_check_reads(struct ast_sf_ctrl *ct,
-			      const uint8_t *golden_buf, uint8_t *test_buf)
-{
-	int i, rc;
-
-	for (i = 0; i < 10; i++) {
-		rc = ast_copy_from_ahb(test_buf, ct->flash, CALIBRATE_BUF_SIZE);
-		if (rc)
-			return rc;
-		if (memcmp(test_buf, golden_buf, CALIBRATE_BUF_SIZE) != 0)
-			return FLASH_ERR_VERIFY_FAILURE;
-	}
-	return 0;
-}
-
-static int ast_sf_calibrate_reads(struct ast_sf_ctrl *ct, uint32_t hdiv,
-				  const uint8_t *golden_buf, uint8_t *test_buf)
-{
-	int i, rc;
-	int good_pass = -1, pass_count = 0;
-	uint32_t shift = (hdiv - 1) << 2;
-	uint32_t mask = ~(0xfu << shift);
-
-#define FREAD_TPASS(i)	(((i) / 2) | (((i) & 1) ? 0 : 8))
-
-	/* Try HCLK delay 0..5, each one with/without delay and look for a
-	 * good pair.
-	 */
-	for (i = 0; i < 12; i++) {
-		bool pass;
-
-		ct->fread_timing_val &= mask;
-		ct->fread_timing_val |= FREAD_TPASS(i) << shift;
-		ast_ahb_writel(ct->fread_timing_val, ct->fread_timing_reg);
-		rc = ast_sf_check_reads(ct, golden_buf, test_buf);
-		if (rc && rc != FLASH_ERR_VERIFY_FAILURE)
-			return rc;
-		pass = (rc == 0);
-		FL_DBG("  * [%08x] %d HCLK delay, %dns DI delay : %s\n",
-		       ct->fread_timing_val, i/2, (i & 1) ? 0 : 4, pass ? "PASS" : "FAIL");
-		if (pass) {
-			pass_count++;
-			if (pass_count == 3) {
-				good_pass = i - 1;
-				break;
-			}
-		} else
-			pass_count = 0;
-	}
-
-	/* No good setting for this frequency */
-	if (good_pass < 0)
-		return FLASH_ERR_VERIFY_FAILURE;
-
-	/* We have at least one pass of margin, let's use first pass */
-	ct->fread_timing_val &= mask;
-	ct->fread_timing_val |= FREAD_TPASS(good_pass) << shift;
-	ast_ahb_writel(ct->fread_timing_val, ct->fread_timing_reg);
-	FL_DBG("AST:  * -> good is pass %d [0x%08x]\n",
-	       good_pass, ct->fread_timing_val);
-	return 0;
-}
-
-static bool ast_calib_data_usable(const uint8_t *test_buf, uint32_t size)
-{
-	const uint32_t *tb32 = (const uint32_t *)test_buf;
-	uint32_t i, cnt = 0;
-
-	/* We check if we have enough words that are neither all 0
-	 * nor all 1's so the calibration can be considered valid.
-	 *
-	 * I use an arbitrary threshold for now of 64
-	 */
-	size >>= 2;
-	for (i = 0; i < size; i++) {
-		if (tb32[i] != 0 && tb32[i] != 0xffffffff)
-			cnt++;
-	}
-	return cnt >= 64;
-}
-
-static int ast_sf_optimize_reads(struct ast_sf_ctrl *ct, struct flash_info *info,
-				 uint32_t max_freq)
-{
-	uint8_t *golden_buf, *test_buf;
-	int i, rc, best_div = -1;
-	uint32_t save_read_val = ct->ctl_read_val;
-
-	test_buf = malloc(CALIBRATE_BUF_SIZE * 2);
-	golden_buf = test_buf + CALIBRATE_BUF_SIZE;
-
-	/* We start with the dumbest setting and read some data */
-	ct->ctl_read_val = (ct->ctl_read_val & 0x2000) |
-		(0x00 << 28) | /* Single bit */
-		(0x00 << 24) | /* CE# max */
-		(0x03 << 16) | /* use normal reads */
-		(0x00 <<  8) | /* HCLK/16 */
-		(0x00 <<  6) | /* no dummy cycle */
-		(0x00);        /* normal read */
-	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
-
-	rc = ast_copy_from_ahb(golden_buf, ct->flash, CALIBRATE_BUF_SIZE);
-	if (rc) {
-		free(test_buf);
-		return rc;
-	}
-
-	/* Establish our read mode with freq field set to 0 */
-	ct->ctl_read_val = save_read_val & 0xfffff0ff;
-
-	/* Check if calibration data is suitable */
-	if (!ast_calib_data_usable(golden_buf, CALIBRATE_BUF_SIZE)) {
-		FL_INF("AST: Calibration area too uniform, "
-		       "using low speed\n");
-		ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
-		free(test_buf);
-		return 0;
-	}
-
-	/* Now we iterate the HCLK dividers until we find our breaking point */
-	for (i = 5; i > 0; i--) {
-		uint32_t tv, freq;
-
-		/* Compare timing to max */
-		freq = ast_ahb_freq / i;
-		if (freq >= max_freq)
-			continue;
-
-		/* Set the timing */
-		tv = ct->ctl_read_val | (ast_ct_hclk_divs[i - 1] << 8);
-		ast_ahb_writel(tv, ct->ctl_reg);
-		FL_DBG("AST: Trying HCLK/%d...\n", i);
-		rc = ast_sf_calibrate_reads(ct, i, golden_buf, test_buf);
-
-		/* Some other error occurred, bail out */
-		if (rc && rc != FLASH_ERR_VERIFY_FAILURE) {
-			free(test_buf);
-			return rc;
-		}
-		if (rc == 0)
-			best_div = i;
-	}
-	free(test_buf);
-
-	/* Nothing found ? */
-	if (best_div < 0)
-		FL_ERR("AST: No good frequency, using dumb slow\n");
-	else {
-		FL_DBG("AST: Found good read timings at HCLK/%d\n", best_div);
-		ct->ctl_read_val |= (ast_ct_hclk_divs[best_div - 1] << 8);
-	}
-	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
-
-	return 0;
-}
-
-static int ast_sf_get_hclk(uint32_t *ctl_val, uint32_t max_freq)
-{
-	int i;
-
-	/* It appears that running commands at HCLK/2 on some micron
-	 * chips results in occasionally reads of bogus status (that
-	 * or unrelated chip hangs).
-	 *
-	 * Since we cannot calibrate properly the reads for commands,
-	 * instead, let's limit our SPI frequency to HCLK/4 to stay
-	 * on the safe side of things
-	 */
-#define MIN_CMD_FREQ	4
-	for (i = MIN_CMD_FREQ; i <= 5; i++) {
-		uint32_t freq = ast_ahb_freq / i;
-		if (freq >= max_freq)
-			continue;
-		*ctl_val |= (ast_ct_hclk_divs[i - 1] << 8);
-		return i;
-	}
-	return 0;
-}
-
-static int ast_sf_setup_macronix(struct ast_sf_ctrl *ct, struct flash_info *info)
-{
-	int rc, div;
-	uint8_t srcr[2];
-
-	/*
-	 * Those Macronix chips support dual reads at 104Mhz
-	 * and dual IO at 84Mhz with 4 dummies.
-	 *
-	 * Our calibration algo should give us something along
-	 * the lines of HCLK/3 (HCLK/2 seems to work sometimes
-	 * but appears to be fairly unreliable) which is 64Mhz
-	 *
-	 * So we chose dual IO mode.
-	 *
-	 * The CE# inactive width for reads must be 7ns, we set it
-	 * to 3T which is about 15ns at the fastest speed we support
-	 * HCLK/2) as I've had issue with smaller values.
-	 *
-	 * For write and program it's 30ns so let's set the value
-	 * for normal ops to 6T.
-	 *
-	 * Preserve the current 4b mode.
-	 */
-	FL_DBG("AST: Setting up Macronix...\n");
-
-	/*
-	 * Read the status and config registers
-	 */
-	rc = ast_sf_cmd_rd(&ct->ops, CMD_RDSR, false, 0, &srcr[0], 1);
-	if (rc != 0) {
-		FL_ERR("AST: Failed to read status\n");
-		return rc;
-	}
-	rc = ast_sf_cmd_rd(&ct->ops, CMD_RDCR, false, 0, &srcr[1], 1);
-	if (rc != 0) {
-		FL_ERR("AST: Failed to read configuration\n");
-		return rc;
-	}
-
-	FL_DBG("AST: Macronix SR:CR: 0x%02x:%02x\n", srcr[0], srcr[1]);
-
-	/* Switch to 8 dummy cycles to enable 104Mhz operations */
-	srcr[1] = (srcr[1] & 0x3f) | 0x80;
-
-	rc = fl_wren(&ct->ops);
-	if (rc) {
-		FL_ERR("AST: Failed to WREN for Macronix config\n");
-		return rc;
-	}
-
-	rc = ast_sf_cmd_wr(&ct->ops, CMD_WRSR, false, 0, srcr, 2);
-	if (rc != 0) {
-		FL_ERR("AST: Failed to write Macronix config\n");
-		return rc;
-	}
-	rc = fl_sync_wait_idle(&ct->ops);;
-	if (rc != 0) {
-		FL_ERR("AST: Failed waiting for config write\n");
-		return rc;
-	}
-
-	FL_DBG("AST: Macronix SR:CR: 0x%02x:%02x\n", srcr[0], srcr[1]);
-
-	/* Use 2READ */
-	ct->ctl_read_val = (ct->ctl_read_val & 0x2000) |
-		(0x03 << 28) | /* Dual IO */
-		(0x0d << 24) | /* CE# width 3T */
-		(0xbb << 16) | /* 2READ command */
-		(0x00 <<  8) | /* HCLK/16 (optimize later) */
-		(0x02 <<  6) | /* 2 bytes dummy cycle (8 clocks) */
-		(0x01);	       /* fast read */
-
-	/* Configure SPI flash read timing */
-	rc = ast_sf_optimize_reads(ct, info, 104000000);
-	if (rc) {
-		FL_ERR("AST: Failed to setup proper read timings, rc=%d\n", rc);
-		return rc;
-	}
-
-	/*
-	 * For other commands and writes also increase the SPI clock
-	 * to HCLK/2 since the chip supports up to 133Mhz and set
-	 * CE# inactive to 6T. We request a timing that is 20% below
-	 * the limit of the chip, so about 106Mhz which should fit.
-	 */
-	ct->ctl_val = (ct->ctl_val & 0x2000) |
-		(0x00 << 28) | /* Single bit */
-		(0x0a << 24) | /* CE# width 6T (b1010) */
-		(0x00 << 16) | /* no command */
-		(0x00 <<  8) | /* HCLK/16 (done later) */
-		(0x00 <<  6) | /* no dummy cycle */
-		(0x00);	       /* normal read */
-
-	div = ast_sf_get_hclk(&ct->ctl_val, 106000000);
-	FL_DBG("AST: Command timing set to HCLK/%d\n", div);
-
-	/* Update chip with current read config */
-	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
-	return 0;
-}
-
-static int ast_sf_setup_winbond(struct ast_sf_ctrl *ct, struct flash_info *info)
-{
-	int rc, div;
-
-	FL_DBG("AST: Setting up Windbond...\n");
-
-	/*
-	 * This Windbond chip support dual reads at 104Mhz
-	 * with 8 dummy cycles.
-	 *
-	 * The CE# inactive width for reads must be 10ns, we set it
-	 * to 3T which is about 15.6ns.
-	 */
-	ct->ctl_read_val = (ct->ctl_read_val & 0x2000) |
-		(0x02 << 28) | /* Dual bit data only */
-		(0x0e << 24) | /* CE# width 2T (b1110) */
-		(0x3b << 16) | /* DREAD command */
-		(0x00 <<  8) | /* HCLK/16 */
-		(0x01 <<  6) | /* 1-byte dummy cycle */
-		(0x01);	       /* fast read */
-
-	/* Configure SPI flash read timing */
-	rc = ast_sf_optimize_reads(ct, info, 104000000);
-	if (rc) {
-		FL_ERR("AST: Failed to setup proper read timings, rc=%d\n", rc);
-		return rc;
-	}
-
-	/*
-	 * For other commands and writes also increase the SPI clock
-	 * to HCLK/2 since the chip supports up to 133Mhz. CE# inactive
-	 * for write and erase is 50ns so let's set it to 10T.
-	 */
-	ct->ctl_val = (ct->ctl_read_val & 0x2000) |
-		(0x00 << 28) | /* Single bit */
-		(0x06 << 24) | /* CE# width 10T (b0110) */
-		(0x00 << 16) | /* no command */
-		(0x00 <<  8) | /* HCLK/16 */
-		(0x00 <<  6) | /* no dummy cycle */
-		(0x01);	       /* fast read */
-
-	div = ast_sf_get_hclk(&ct->ctl_val, 106000000);
-	FL_DBG("AST: Command timing set to HCLK/%d\n", div);
-
-	/* Update chip with current read config */
-	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
-	return 0;
-}
-
-static int ast_sf_setup_micron(struct ast_sf_ctrl *ct, struct flash_info *info)
-{
-	uint8_t	vconf, ext_id[6];
-	int rc, div;
-
-	FL_DBG("AST: Setting up Micron...\n");
-
-	/*
-	 * Read the extended chip ID to try to detect old vs. new
-	 * flashes since old Micron flashes have a lot of issues
-	 */
-	rc = ast_sf_cmd_rd(&ct->ops, CMD_RDID, false, 0, ext_id, 6);
-	if (rc != 0) {
-		FL_ERR("AST: Failed to read Micron ext ID, sticking to dumb speed\n");
-		return 0;
-	}
-	/* Check ID matches expectations */
-	if (ext_id[0] != ((info->id >> 16) & 0xff) ||
-	    ext_id[1] != ((info->id >>  8) & 0xff) ||
-	    ext_id[2] != ((info->id      ) & 0xff)) {
-		FL_ERR("AST: Micron ext ID mismatch, sticking to dumb speed\n");
-		return 0;
-	}
-	FL_DBG("AST: Micron ext ID byte: 0x%02x\n", ext_id[4]);
-
-	/* Check for old (<45nm) chips, don't try to be fancy on those */
-	if (!(ext_id[4] & 0x40)) {
-		FL_DBG("AST: Old chip, using dumb timings\n");
-		goto dumb;
-	}
-
-	/*
-	 * Read the micron specific volatile configuration reg
-	 */
-	rc = ast_sf_cmd_rd(&ct->ops, CMD_MIC_RDVCONF, false, 0, &vconf, 1);
-	if (rc != 0) {
-		FL_ERR("AST: Failed to read Micron vconf, sticking to dumb speed\n");
-		goto dumb;
-	}
-	FL_DBG("AST: Micron VCONF: 0x%02x\n", vconf);
-
-	/* Switch to 8 dummy cycles (we might be able to operate with 4
-	 * but let's keep some margin
-	 */
-	vconf = (vconf & 0x0f) | 0x80;
-
-	rc = ast_sf_cmd_wr(&ct->ops, CMD_MIC_WRVCONF, false, 0, &vconf, 1);
-	if (rc != 0) {
-		FL_ERR("AST: Failed to write Micron vconf, "
-		       " sticking to dumb speed\n");
-		goto dumb;
-	}
-	rc = fl_sync_wait_idle(&ct->ops);;
-	if (rc != 0) {
-		FL_ERR("AST: Failed waiting for config write\n");
-		return rc;
-	}
-	FL_DBG("AST: Updated to  : 0x%02x\n", vconf);
-
-	/*
-	 * Try to do full dual IO, with 8 dummy cycles it supports 133Mhz
-	 *
-	 * The CE# inactive width for reads must be 20ns, we set it
-	 * to 4T which is about 20.8ns.
-	 */
-	ct->ctl_read_val = (ct->ctl_read_val & 0x2000) |
-		(0x03 << 28) | /* Single bit */
-		(0x0c << 24) | /* CE# 4T */
-		(0xbb << 16) | /* 2READ command */
-		(0x00 <<  8) | /* HCLK/16 (optimize later) */
-		(0x02 <<  6) | /* 8 dummy cycles (2 bytes) */
-		(0x01);	       /* fast read */
-
-	/* Configure SPI flash read timing */
-	rc = ast_sf_optimize_reads(ct, info, 133000000);
-	if (rc) {
-		FL_ERR("AST: Failed to setup proper read timings, rc=%d\n", rc);
-		return rc;
-	}
-
-	/*
-	 * For other commands and writes also increase the SPI clock
-	 * to HCLK/2 since the chip supports up to 133Mhz. CE# inactive
-	 * for write and erase is 50ns so let's set it to 10T.
-	 */
-	ct->ctl_val = (ct->ctl_read_val & 0x2000) |
-		(0x00 << 28) | /* Single bit */
-		(0x06 << 24) | /* CE# width 10T (b0110) */
-		(0x00 << 16) | /* no command */
-		(0x00 <<  8) | /* HCLK/16 */
-		(0x00 <<  6) | /* no dummy cycle */
-		(0x00);	       /* norm read */
-
-	div = ast_sf_get_hclk(&ct->ctl_val, 133000000);
-	FL_DBG("AST: Command timing set to HCLK/%d\n", div);
-
-	/* Update chip with current read config */
-	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
-
-	return 0;
-
- dumb:
-	ct->ctl_val = ct->ctl_read_val = (ct->ctl_read_val & 0x2000) |
-		(0x00 << 28) | /* Single bit */
-		(0x00 << 24) | /* CE# max */
-		(0x03 << 16) | /* use normal reads */
-		(0x06 <<  8) | /* HCLK/4 */
-		(0x00 <<  6) | /* no dummy cycle */
-		(0x00);	       /* normal read */
-
-	/* Update chip with current read config */
-	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
-
-	return 0;
-}
-
-static int ast_sf_setup(struct spi_flash_ctrl *ctrl, uint32_t *tsize)
-{
-	struct ast_sf_ctrl *ct = container_of(ctrl, struct ast_sf_ctrl, ops);	
-	struct flash_info *info = ctrl->finfo;
-
-	(void)tsize;
-
-	/*
-	 * Configure better timings and read mode for known
-	 * flash chips
-	 */
-	switch(info->id) {		
-	case 0xc22019: /* MX25L25635F */
-	case 0xc2201a: /* MX66L51235F */
-		return ast_sf_setup_macronix(ct, info);
-	case 0xef4018: /* W25Q128BV */
-		return ast_sf_setup_winbond(ct, info);
-	case 0x20ba20: /* MT25Qx512xx */
-		return ast_sf_setup_micron(ct, info);
-	}
-	/* No special tuning */
-	return 0;
-}
-
-static bool ast_sf_init_pnor(struct ast_sf_ctrl *ct)
-{
-	uint32_t reg;
-
-	ct->ctl_reg = PNOR_SPI_FCTL_CTRL;
-	ct->fread_timing_reg = PNOR_SPI_FREAD_TIMING;
-	ct->flash = PNOR_FLASH_BASE;
-
-	/* Enable writing to the controller */
-	reg = ast_ahb_readl(PNOR_SPI_FCTL_CONF);
-	if (reg == 0xffffffff) {
-		FL_ERR("AST_SF: Failed read from controller config\n");
-		return false;
-	}
-	ast_ahb_writel(reg | 1, PNOR_SPI_FCTL_CONF);
-
-	/*
-	 * Snapshot control reg and sanitize it for our
-	 * use, switching to 1-bit mode, clearing user
-	 * mode if set, etc...
-	 *
-	 * Also configure SPI clock to something safe
-	 * like HCLK/8 (24Mhz)
-	 */
-	ct->ctl_val = ast_ahb_readl(ct->ctl_reg);
-	if (ct->ctl_val == 0xffffffff) {
-		FL_ERR("AST_SF: Failed read from controller control\n");
-		return false;
-	}
-
-	ct->ctl_val = (ct->ctl_val & 0x2000) |
-		(0x00 << 28) | /* Single bit */
-		(0x00 << 24) | /* CE# width 16T */
-		(0x00 << 16) | /* no command */
-		(0x04 <<  8) | /* HCLK/8 */
-		(0x00 <<  6) | /* no dummy cycle */
-		(0x00);	       /* normal read */
-
-	/* Initial read mode is default */
-	ct->ctl_read_val = ct->ctl_val;
-
-	/* Initial read timings all 0 */
-	ct->fread_timing_val = 0;
-
-	/* Configure for read */
-	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
-	ast_ahb_writel(ct->fread_timing_val, ct->fread_timing_reg);
-
-	if (ct->ctl_val & 0x2000)
-		ct->mode_4b = true;
-	else
-		ct->mode_4b = false;
-
-	return true;
-}
-
-static bool ast_sf_init_bmc(struct ast_sf_ctrl *ct)
-{
-	ct->ctl_reg = BMC_SPI_FCTL_CTRL;
-	ct->fread_timing_reg = BMC_SPI_FREAD_TIMING;
-	ct->flash = BMC_FLASH_BASE;
-
-	/*
-	 * Snapshot control reg and sanitize it for our
-	 * use, switching to 1-bit mode, clearing user
-	 * mode if set, etc...
-	 *
-	 * Also configure SPI clock to something safe
-	 * like HCLK/8 (24Mhz)
-	 */
-	ct->ctl_val =
-		(0x00 << 28) | /* Single bit */
-		(0x00 << 24) | /* CE# width 16T */
-		(0x00 << 16) | /* no command */
-		(0x04 <<  8) | /* HCLK/8 */
-		(0x00 <<  6) | /* no dummy cycle */
-		(0x00);	       /* normal read */
-
-	/* Initial read mode is default */
-	ct->ctl_read_val = ct->ctl_val;
-
-	/* Initial read timings all 0 */
-	ct->fread_timing_val = 0;
-
-	/* Configure for read */
-	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
-	ast_ahb_writel(ct->fread_timing_val, ct->fread_timing_reg);
-
-	ct->mode_4b = false;
-
-	return true;
-}
-
-int ast_sf_open(uint8_t type, struct spi_flash_ctrl **ctrl)
-{
-	struct ast_sf_ctrl *ct;
-
-	if (type != AST_SF_TYPE_PNOR && type != AST_SF_TYPE_BMC)
-		return -EINVAL;
-
-	*ctrl = NULL;
-	ct = malloc(sizeof(*ct));
-	if (!ct) {
-		FL_ERR("AST_SF: Failed to allocate\n");
-		return -ENOMEM;
-	}
-	memset(ct, 0, sizeof(*ct));
-	ct->type = type;
-	ct->ops.cmd_wr = ast_sf_cmd_wr;
-	ct->ops.cmd_rd = ast_sf_cmd_rd;
-	ct->ops.set_4b = ast_sf_set_4b;
-	ct->ops.read = ast_sf_read;
-	ct->ops.setup = ast_sf_setup;
-
-	ast_get_ahb_freq();
-
-	if (type == AST_SF_TYPE_PNOR) {
-		if (!ast_sf_init_pnor(ct))
-			goto fail;
-	} else {
-		if (!ast_sf_init_bmc(ct))
-			goto fail;
-	}
-
-	*ctrl = &ct->ops;
-
-	return 0;
- fail:
-	free(ct);
-	return -EIO;
-}
-
-void ast_sf_close(struct spi_flash_ctrl *ctrl)
-{
-	struct ast_sf_ctrl *ct = container_of(ctrl, struct ast_sf_ctrl, ops);
-
-	/* Restore control reg to read */
-	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
-
-	/* Additional cleanup */
-	if (ct->type == AST_SF_TYPE_PNOR) {
-		uint32_t reg = ast_ahb_readl(PNOR_SPI_FCTL_CONF);
-		if (reg != 0xffffffff)
-			ast_ahb_writel(reg & ~1, PNOR_SPI_FCTL_CONF);
-	}
-
-	/* Free the whole lot */
-	free(ct);
-}
-
+/* Copyright 2013-2014 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * 	http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <stdio.h>
+#include <string.h>
+
+#include <libflash/libflash.h>
+#include <libflash/libflash-priv.h>
+
+#include "ast.h"
+
+#ifndef __unused
+#define __unused __attribute__((unused))
+#endif
+
+#define CALIBRATE_BUF_SIZE	16384
+
+struct ast_sf_ctrl {
+	/* We have 2 controllers, one for the BMC flash, one for the PNOR */
+	uint8_t			type;
+
+	/* Address and previous value of the ctrl register */
+	uint32_t		ctl_reg;
+
+	/* Control register value for normal commands */
+	uint32_t		ctl_val;
+
+	/* Control register value for (fast) reads */
+	uint32_t		ctl_read_val;
+
+	/* Flash read timing register  */
+	uint32_t		fread_timing_reg;
+	uint32_t		fread_timing_val;
+
+	/* Address of the flash mapping */
+	uint32_t		flash;
+
+	/* Current 4b mode */
+	bool			mode_4b;
+
+	/* Callbacks */
+	struct spi_flash_ctrl	ops;
+};
+
+static uint32_t ast_ahb_freq;
+
+static const uint32_t ast_ct_hclk_divs[] = {
+	0xf, /* HCLK */
+	0x7, /* HCLK/2 */
+	0xe, /* HCLK/3 */
+	0x6, /* HCLK/4 */
+	0xd, /* HCLK/5 */
+};
+
+static int ast_sf_start_cmd(struct ast_sf_ctrl *ct, uint8_t cmd)
+{
+	/* Switch to user mode, CE# dropped */
+	ast_ahb_writel(ct->ctl_val | 7, ct->ctl_reg);
+
+	/* user mode, CE# active */
+	ast_ahb_writel(ct->ctl_val | 3, ct->ctl_reg);
+
+	/* write cmd */
+	return ast_copy_to_ahb(ct->flash, &cmd, 1);
+}
+
+static void ast_sf_end_cmd(struct ast_sf_ctrl *ct)
+{
+	/* clear CE# */
+	ast_ahb_writel(ct->ctl_val | 7, ct->ctl_reg);
+
+	/* Switch back to read mode */
+	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
+}
+
+static int ast_sf_send_addr(struct ast_sf_ctrl *ct, uint32_t addr)
+{
+	const void *ap;
+
+	/* Layout address MSB first in memory */
+	addr = cpu_to_be32(addr);
+
+	/* Send the right amount of bytes */
+	ap = (char *)&addr;
+
+	if (ct->mode_4b)
+		return ast_copy_to_ahb(ct->flash, ap, 4);
+	else
+		return ast_copy_to_ahb(ct->flash, ap + 1, 3);
+}
+
+static int ast_sf_cmd_rd(struct spi_flash_ctrl *ctrl, uint8_t cmd,
+			 bool has_addr, uint32_t addr, void *buffer,
+			 uint32_t size)
+{
+	struct ast_sf_ctrl *ct = container_of(ctrl, struct ast_sf_ctrl, ops);
+	int rc;
+
+	rc = ast_sf_start_cmd(ct, cmd);
+	if (rc)
+		goto bail;
+	if (has_addr) {
+		rc = ast_sf_send_addr(ct, addr);
+		if (rc)
+			goto bail;
+	}
+	if (buffer && size)
+		rc = ast_copy_from_ahb(buffer, ct->flash, size);
+ bail:
+	ast_sf_end_cmd(ct);
+	return rc;
+}
+
+static int ast_sf_cmd_wr(struct spi_flash_ctrl *ctrl, uint8_t cmd,
+			 bool has_addr, uint32_t addr, const void *buffer,
+			 uint32_t size)
+{
+	struct ast_sf_ctrl *ct = container_of(ctrl, struct ast_sf_ctrl, ops);
+	int rc;
+
+	rc = ast_sf_start_cmd(ct, cmd);
+	if (rc)
+		goto bail;
+	if (has_addr) {
+		rc = ast_sf_send_addr(ct, addr);
+		if (rc)
+			goto bail;
+	}
+	if (buffer && size)
+		rc = ast_copy_to_ahb(ct->flash, buffer, size);
+ bail:
+	ast_sf_end_cmd(ct);
+	return rc;
+}
+
+static int ast_sf_set_4b(struct spi_flash_ctrl *ctrl, bool enable)
+{
+	struct ast_sf_ctrl *ct = container_of(ctrl, struct ast_sf_ctrl, ops);
+	uint32_t ce_ctrl = 0;
+
+	if (ct->type == AST_SF_TYPE_BMC && ct->ops.finfo->size > 0x1000000)
+		ce_ctrl = ast_ahb_readl(BMC_SPI_FCTL_CE_CTRL);
+
+	/*
+	 * We update the "old" value as well since when quitting
+	 * we don't restore the mode of the flash itself so we need
+	 * to leave the controller in a compatible setup
+	 */
+	if (enable) {
+		ct->ctl_val |= 0x2000;
+		ct->ctl_read_val |= 0x2000;
+		ce_ctrl |= 0x1;
+	} else {
+		ct->ctl_val &= ~0x2000;
+		ct->ctl_read_val &= ~0x2000;
+		ce_ctrl &= ~0x1;
+	}
+	ct->mode_4b = enable;
+
+	/* Update read mode */
+	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
+
+	if (ce_ctrl)
+		ast_ahb_writel(ce_ctrl, BMC_SPI_FCTL_CE_CTRL);
+
+	return 0;
+}
+
+static int ast_sf_read(struct spi_flash_ctrl *ctrl, uint32_t pos,
+		       void *buf, uint32_t len)
+{
+	struct ast_sf_ctrl *ct = container_of(ctrl, struct ast_sf_ctrl, ops);
+
+	/*
+	 * We are in read mode by default. We don't yet support fancy
+	 * things like fast read or X2 mode
+	 */
+	return ast_copy_from_ahb(buf, ct->flash + pos, len);
+}
+
+static void ast_get_ahb_freq(void)
+{
+	static const uint32_t cpu_freqs_24_48[] = {
+		384000000,
+		360000000,
+		336000000,
+		408000000
+	};
+	static const uint32_t cpu_freqs_25[] = {
+		400000000,
+		375000000,
+		350000000,
+		425000000
+	};
+	static const uint32_t ahb_div[] = { 1, 2, 4, 3 };
+	uint32_t strap, cpu_clk, div;
+
+	if (ast_ahb_freq)
+		return;
+
+	/* HW strapping gives us the CPU freq and AHB divisor */
+	strap = ast_ahb_readl(SCU_HW_STRAPPING);
+	if (strap & 0x00800000) {
+		FL_DBG("AST: CLKIN 25Mhz\n");
+		cpu_clk = cpu_freqs_25[(strap >> 8) & 3];
+	} else {
+		FL_DBG("AST: CLKIN 24/48Mhz\n");
+		cpu_clk = cpu_freqs_24_48[(strap >> 8) & 3];
+	}
+	FL_DBG("AST: CPU frequency: %d Mhz\n", cpu_clk / 1000000);
+	div = ahb_div[(strap >> 10) & 3];
+	ast_ahb_freq = cpu_clk / div;
+	FL_DBG("AST: AHB frequency: %d Mhz\n", ast_ahb_freq / 1000000);
+}
+
+static int ast_sf_check_reads(struct ast_sf_ctrl *ct,
+			      const uint8_t *golden_buf, uint8_t *test_buf)
+{
+	int i, rc;
+
+	for (i = 0; i < 10; i++) {
+		rc = ast_copy_from_ahb(test_buf, ct->flash, CALIBRATE_BUF_SIZE);
+		if (rc)
+			return rc;
+		if (memcmp(test_buf, golden_buf, CALIBRATE_BUF_SIZE) != 0)
+			return FLASH_ERR_VERIFY_FAILURE;
+	}
+	return 0;
+}
+
+static int ast_sf_calibrate_reads(struct ast_sf_ctrl *ct, uint32_t hdiv,
+				  const uint8_t *golden_buf, uint8_t *test_buf)
+{
+	int i, rc;
+	int good_pass = -1, pass_count = 0;
+	uint32_t shift = (hdiv - 1) << 2;
+	uint32_t mask = ~(0xfu << shift);
+
+#define FREAD_TPASS(i)	(((i) / 2) | (((i) & 1) ? 0 : 8))
+
+	/* Try HCLK delay 0..5, each one with/without delay and look for a
+	 * good pair.
+	 */
+	for (i = 0; i < 12; i++) {
+		bool pass;
+
+		ct->fread_timing_val &= mask;
+		ct->fread_timing_val |= FREAD_TPASS(i) << shift;
+		ast_ahb_writel(ct->fread_timing_val, ct->fread_timing_reg);
+		rc = ast_sf_check_reads(ct, golden_buf, test_buf);
+		if (rc && rc != FLASH_ERR_VERIFY_FAILURE)
+			return rc;
+		pass = (rc == 0);
+		FL_DBG("  * [%08x] %d HCLK delay, %dns DI delay : %s\n",
+		       ct->fread_timing_val, i/2, (i & 1) ? 0 : 4, pass ? "PASS" : "FAIL");
+		if (pass) {
+			pass_count++;
+			if (pass_count == 3) {
+				good_pass = i - 1;
+				break;
+			}
+		} else
+			pass_count = 0;
+	}
+
+	/* No good setting for this frequency */
+	if (good_pass < 0)
+		return FLASH_ERR_VERIFY_FAILURE;
+
+	/* We have at least one pass of margin, let's use first pass */
+	ct->fread_timing_val &= mask;
+	ct->fread_timing_val |= FREAD_TPASS(good_pass) << shift;
+	ast_ahb_writel(ct->fread_timing_val, ct->fread_timing_reg);
+	FL_DBG("AST:  * -> good is pass %d [0x%08x]\n",
+	       good_pass, ct->fread_timing_val);
+	return 0;
+}
+
+static bool ast_calib_data_usable(const uint8_t *test_buf, uint32_t size)
+{
+	const uint32_t *tb32 = (const uint32_t *)test_buf;
+	uint32_t i, cnt = 0;
+
+	/* We check if we have enough words that are neither all 0
+	 * nor all 1's so the calibration can be considered valid.
+	 *
+	 * I use an arbitrary threshold for now of 64
+	 */
+	size >>= 2;
+	for (i = 0; i < size; i++) {
+		if (tb32[i] != 0 && tb32[i] != 0xffffffff)
+			cnt++;
+	}
+	return cnt >= 64;
+}
+
+static int ast_sf_optimize_reads(struct ast_sf_ctrl *ct,
+				 struct flash_info *info __unused,
+				 uint32_t max_freq)
+{
+	uint8_t *golden_buf, *test_buf;
+	int i, rc, best_div = -1;
+	uint32_t save_read_val = ct->ctl_read_val;
+
+	test_buf = malloc(CALIBRATE_BUF_SIZE * 2);
+	golden_buf = test_buf + CALIBRATE_BUF_SIZE;
+
+	/* We start with the dumbest setting and read some data */
+	ct->ctl_read_val = (ct->ctl_read_val & 0x2000) |
+		(0x00 << 28) | /* Single bit */
+		(0x00 << 24) | /* CE# max */
+		(0x03 << 16) | /* use normal reads */
+		(0x00 <<  8) | /* HCLK/16 */
+		(0x00 <<  6) | /* no dummy cycle */
+		(0x00);        /* normal read */
+	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
+
+	rc = ast_copy_from_ahb(golden_buf, ct->flash, CALIBRATE_BUF_SIZE);
+	if (rc) {
+		free(test_buf);
+		return rc;
+	}
+
+	/* Establish our read mode with freq field set to 0 */
+	ct->ctl_read_val = save_read_val & 0xfffff0ff;
+
+	/* Check if calibration data is suitable */
+	if (!ast_calib_data_usable(golden_buf, CALIBRATE_BUF_SIZE)) {
+		FL_INF("AST: Calibration area too uniform, "
+		       "using low speed\n");
+		ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
+		free(test_buf);
+		return 0;
+	}
+
+	/* Now we iterate the HCLK dividers until we find our breaking point */
+	for (i = 5; i > 0; i--) {
+		uint32_t tv, freq;
+
+		/* Compare timing to max */
+		freq = ast_ahb_freq / i;
+		if (freq >= max_freq)
+			continue;
+
+		/* Set the timing */
+		tv = ct->ctl_read_val | (ast_ct_hclk_divs[i - 1] << 8);
+		ast_ahb_writel(tv, ct->ctl_reg);
+		FL_DBG("AST: Trying HCLK/%d...\n", i);
+		rc = ast_sf_calibrate_reads(ct, i, golden_buf, test_buf);
+
+		/* Some other error occurred, bail out */
+		if (rc && rc != FLASH_ERR_VERIFY_FAILURE) {
+			free(test_buf);
+			return rc;
+		}
+		if (rc == 0)
+			best_div = i;
+	}
+	free(test_buf);
+
+	/* Nothing found ? */
+	if (best_div < 0)
+		FL_ERR("AST: No good frequency, using dumb slow\n");
+	else {
+		FL_DBG("AST: Found good read timings at HCLK/%d\n", best_div);
+		ct->ctl_read_val |= (ast_ct_hclk_divs[best_div - 1] << 8);
+	}
+	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
+
+	return 0;
+}
+
+static int ast_sf_get_hclk(uint32_t *ctl_val, uint32_t max_freq)
+{
+	int i;
+
+	/* It appears that running commands at HCLK/2 on some micron
+	 * chips results in occasionally reads of bogus status (that
+	 * or unrelated chip hangs).
+	 *
+	 * Since we cannot calibrate properly the reads for commands,
+	 * instead, let's limit our SPI frequency to HCLK/4 to stay
+	 * on the safe side of things
+	 */
+#define MIN_CMD_FREQ	4
+	for (i = MIN_CMD_FREQ; i <= 5; i++) {
+		uint32_t freq = ast_ahb_freq / i;
+		if (freq >= max_freq)
+			continue;
+		*ctl_val |= (ast_ct_hclk_divs[i - 1] << 8);
+		return i;
+	}
+	return 0;
+}
+
+static int ast_sf_setup_macronix(struct ast_sf_ctrl *ct, struct flash_info *info)
+{
+	int rc, div __unused;
+	uint8_t srcr[2];
+
+	/*
+	 * Those Macronix chips support dual reads at 104Mhz
+	 * and dual IO at 84Mhz with 4 dummies.
+	 *
+	 * Our calibration algo should give us something along
+	 * the lines of HCLK/3 (HCLK/2 seems to work sometimes
+	 * but appears to be fairly unreliable) which is 64Mhz
+	 *
+	 * So we chose dual IO mode.
+	 *
+	 * The CE# inactive width for reads must be 7ns, we set it
+	 * to 3T which is about 15ns at the fastest speed we support
+	 * HCLK/2) as I've had issue with smaller values.
+	 *
+	 * For write and program it's 30ns so let's set the value
+	 * for normal ops to 6T.
+	 *
+	 * Preserve the current 4b mode.
+	 */
+	FL_DBG("AST: Setting up Macronix...\n");
+
+	/*
+	 * Read the status and config registers
+	 */
+	rc = ast_sf_cmd_rd(&ct->ops, CMD_RDSR, false, 0, &srcr[0], 1);
+	if (rc != 0) {
+		FL_ERR("AST: Failed to read status\n");
+		return rc;
+	}
+	rc = ast_sf_cmd_rd(&ct->ops, CMD_RDCR, false, 0, &srcr[1], 1);
+	if (rc != 0) {
+		FL_ERR("AST: Failed to read configuration\n");
+		return rc;
+	}
+
+	FL_DBG("AST: Macronix SR:CR: 0x%02x:%02x\n", srcr[0], srcr[1]);
+
+	/* Switch to 8 dummy cycles to enable 104Mhz operations */
+	srcr[1] = (srcr[1] & 0x3f) | 0x80;
+
+	rc = fl_wren(&ct->ops);
+	if (rc) {
+		FL_ERR("AST: Failed to WREN for Macronix config\n");
+		return rc;
+	}
+
+	rc = ast_sf_cmd_wr(&ct->ops, CMD_WRSR, false, 0, srcr, 2);
+	if (rc != 0) {
+		FL_ERR("AST: Failed to write Macronix config\n");
+		return rc;
+	}
+	rc = fl_sync_wait_idle(&ct->ops);;
+	if (rc != 0) {
+		FL_ERR("AST: Failed waiting for config write\n");
+		return rc;
+	}
+
+	FL_DBG("AST: Macronix SR:CR: 0x%02x:%02x\n", srcr[0], srcr[1]);
+
+	/* Use 2READ */
+	ct->ctl_read_val = (ct->ctl_read_val & 0x2000) |
+		(0x03 << 28) | /* Dual IO */
+		(0x0d << 24) | /* CE# width 3T */
+		(0xbb << 16) | /* 2READ command */
+		(0x00 <<  8) | /* HCLK/16 (optimize later) */
+		(0x02 <<  6) | /* 2 bytes dummy cycle (8 clocks) */
+		(0x01);	       /* fast read */
+
+	/* Configure SPI flash read timing */
+	rc = ast_sf_optimize_reads(ct, info, 104000000);
+	if (rc) {
+		FL_ERR("AST: Failed to setup proper read timings, rc=%d\n", rc);
+		return rc;
+	}
+
+	/*
+	 * For other commands and writes also increase the SPI clock
+	 * to HCLK/2 since the chip supports up to 133Mhz and set
+	 * CE# inactive to 6T. We request a timing that is 20% below
+	 * the limit of the chip, so about 106Mhz which should fit.
+	 */
+	ct->ctl_val = (ct->ctl_val & 0x2000) |
+		(0x00 << 28) | /* Single bit */
+		(0x0a << 24) | /* CE# width 6T (b1010) */
+		(0x00 << 16) | /* no command */
+		(0x00 <<  8) | /* HCLK/16 (done later) */
+		(0x00 <<  6) | /* no dummy cycle */
+		(0x00);	       /* normal read */
+
+	div = ast_sf_get_hclk(&ct->ctl_val, 106000000);
+	FL_DBG("AST: Command timing set to HCLK/%d\n", div);
+
+	/* Update chip with current read config */
+	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
+	return 0;
+}
+
+static int ast_sf_setup_winbond(struct ast_sf_ctrl *ct, struct flash_info *info)
+{
+	int rc, div __unused;
+
+	FL_DBG("AST: Setting up Windbond...\n");
+
+	/*
+	 * This Windbond chip support dual reads at 104Mhz
+	 * with 8 dummy cycles.
+	 *
+	 * The CE# inactive width for reads must be 10ns, we set it
+	 * to 3T which is about 15.6ns.
+	 */
+	ct->ctl_read_val = (ct->ctl_read_val & 0x2000) |
+		(0x02 << 28) | /* Dual bit data only */
+		(0x0e << 24) | /* CE# width 2T (b1110) */
+		(0x3b << 16) | /* DREAD command */
+		(0x00 <<  8) | /* HCLK/16 */
+		(0x01 <<  6) | /* 1-byte dummy cycle */
+		(0x01);	       /* fast read */
+
+	/* Configure SPI flash read timing */
+	rc = ast_sf_optimize_reads(ct, info, 104000000);
+	if (rc) {
+		FL_ERR("AST: Failed to setup proper read timings, rc=%d\n", rc);
+		return rc;
+	}
+
+	/*
+	 * For other commands and writes also increase the SPI clock
+	 * to HCLK/2 since the chip supports up to 133Mhz. CE# inactive
+	 * for write and erase is 50ns so let's set it to 10T.
+	 */
+	ct->ctl_val = (ct->ctl_read_val & 0x2000) |
+		(0x00 << 28) | /* Single bit */
+		(0x06 << 24) | /* CE# width 10T (b0110) */
+		(0x00 << 16) | /* no command */
+		(0x00 <<  8) | /* HCLK/16 */
+		(0x00 <<  6) | /* no dummy cycle */
+		(0x01);	       /* fast read */
+
+	div = ast_sf_get_hclk(&ct->ctl_val, 106000000);
+	FL_DBG("AST: Command timing set to HCLK/%d\n", div);
+
+	/* Update chip with current read config */
+	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
+	return 0;
+}
+
+static int ast_sf_setup_micron(struct ast_sf_ctrl *ct, struct flash_info *info)
+{
+	uint8_t	vconf, ext_id[6];
+	int rc, div __unused;
+
+	FL_DBG("AST: Setting up Micron...\n");
+
+	/*
+	 * Read the extended chip ID to try to detect old vs. new
+	 * flashes since old Micron flashes have a lot of issues
+	 */
+	rc = ast_sf_cmd_rd(&ct->ops, CMD_RDID, false, 0, ext_id, 6);
+	if (rc != 0) {
+		FL_ERR("AST: Failed to read Micron ext ID, sticking to dumb speed\n");
+		return 0;
+	}
+	/* Check ID matches expectations */
+	if (ext_id[0] != ((info->id >> 16) & 0xff) ||
+	    ext_id[1] != ((info->id >>  8) & 0xff) ||
+	    ext_id[2] != ((info->id      ) & 0xff)) {
+		FL_ERR("AST: Micron ext ID mismatch, sticking to dumb speed\n");
+		return 0;
+	}
+	FL_DBG("AST: Micron ext ID byte: 0x%02x\n", ext_id[4]);
+
+	/* Check for old (<45nm) chips, don't try to be fancy on those */
+	if (!(ext_id[4] & 0x40)) {
+		FL_DBG("AST: Old chip, using dumb timings\n");
+		goto dumb;
+	}
+
+	/*
+	 * Read the micron specific volatile configuration reg
+	 */
+	rc = ast_sf_cmd_rd(&ct->ops, CMD_MIC_RDVCONF, false, 0, &vconf, 1);
+	if (rc != 0) {
+		FL_ERR("AST: Failed to read Micron vconf, sticking to dumb speed\n");
+		goto dumb;
+	}
+	FL_DBG("AST: Micron VCONF: 0x%02x\n", vconf);
+
+	/* Switch to 8 dummy cycles (we might be able to operate with 4
+	 * but let's keep some margin
+	 */
+	vconf = (vconf & 0x0f) | 0x80;
+
+	rc = ast_sf_cmd_wr(&ct->ops, CMD_MIC_WRVCONF, false, 0, &vconf, 1);
+	if (rc != 0) {
+		FL_ERR("AST: Failed to write Micron vconf, "
+		       " sticking to dumb speed\n");
+		goto dumb;
+	}
+	rc = fl_sync_wait_idle(&ct->ops);;
+	if (rc != 0) {
+		FL_ERR("AST: Failed waiting for config write\n");
+		return rc;
+	}
+	FL_DBG("AST: Updated to  : 0x%02x\n", vconf);
+
+	/*
+	 * Try to do full dual IO, with 8 dummy cycles it supports 133Mhz
+	 *
+	 * The CE# inactive width for reads must be 20ns, we set it
+	 * to 4T which is about 20.8ns.
+	 */
+	ct->ctl_read_val = (ct->ctl_read_val & 0x2000) |
+		(0x03 << 28) | /* Single bit */
+		(0x0c << 24) | /* CE# 4T */
+		(0xbb << 16) | /* 2READ command */
+		(0x00 <<  8) | /* HCLK/16 (optimize later) */
+		(0x02 <<  6) | /* 8 dummy cycles (2 bytes) */
+		(0x01);	       /* fast read */
+
+	/* Configure SPI flash read timing */
+	rc = ast_sf_optimize_reads(ct, info, 133000000);
+	if (rc) {
+		FL_ERR("AST: Failed to setup proper read timings, rc=%d\n", rc);
+		return rc;
+	}
+
+	/*
+	 * For other commands and writes also increase the SPI clock
+	 * to HCLK/2 since the chip supports up to 133Mhz. CE# inactive
+	 * for write and erase is 50ns so let's set it to 10T.
+	 */
+	ct->ctl_val = (ct->ctl_read_val & 0x2000) |
+		(0x00 << 28) | /* Single bit */
+		(0x06 << 24) | /* CE# width 10T (b0110) */
+		(0x00 << 16) | /* no command */
+		(0x00 <<  8) | /* HCLK/16 */
+		(0x00 <<  6) | /* no dummy cycle */
+		(0x00);	       /* norm read */
+
+	div = ast_sf_get_hclk(&ct->ctl_val, 133000000);
+	FL_DBG("AST: Command timing set to HCLK/%d\n", div);
+
+	/* Update chip with current read config */
+	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
+
+	return 0;
+
+ dumb:
+	ct->ctl_val = ct->ctl_read_val = (ct->ctl_read_val & 0x2000) |
+		(0x00 << 28) | /* Single bit */
+		(0x00 << 24) | /* CE# max */
+		(0x03 << 16) | /* use normal reads */
+		(0x06 <<  8) | /* HCLK/4 */
+		(0x00 <<  6) | /* no dummy cycle */
+		(0x00);	       /* normal read */
+
+	/* Update chip with current read config */
+	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
+
+	return 0;
+}
+
+static int ast_sf_setup(struct spi_flash_ctrl *ctrl, uint32_t *tsize)
+{
+	struct ast_sf_ctrl *ct = container_of(ctrl, struct ast_sf_ctrl, ops);
+	struct flash_info *info = ctrl->finfo;
+
+	(void)tsize;
+
+	/*
+	 * Configure better timings and read mode for known
+	 * flash chips
+	 */
+	switch(info->id) {
+	case 0xc22018: /* MX25L12835F */
+	case 0xc22019: /* MX25L25635F */
+	case 0xc2201a: /* MX66L51235F */
+		return ast_sf_setup_macronix(ct, info);
+	case 0xef4018: /* W25Q128BV */
+		return ast_sf_setup_winbond(ct, info);
+	case 0x20ba20: /* MT25Qx512xx */
+		return ast_sf_setup_micron(ct, info);
+	}
+	/* No special tuning */
+	return 0;
+}
+
+static bool ast_sf_init_pnor(struct ast_sf_ctrl *ct)
+{
+	uint32_t reg;
+
+	ct->ctl_reg = PNOR_SPI_FCTL_CTRL;
+	ct->fread_timing_reg = PNOR_SPI_FREAD_TIMING;
+	ct->flash = PNOR_FLASH_BASE;
+
+	/* Enable writing to the controller */
+	reg = ast_ahb_readl(PNOR_SPI_FCTL_CONF);
+	if (reg == 0xffffffff) {
+		FL_ERR("AST_SF: Failed read from controller config\n");
+		return false;
+	}
+	ast_ahb_writel(reg | 1, PNOR_SPI_FCTL_CONF);
+
+	/*
+	 * Snapshot control reg and sanitize it for our
+	 * use, switching to 1-bit mode, clearing user
+	 * mode if set, etc...
+	 *
+	 * Also configure SPI clock to something safe
+	 * like HCLK/8 (24Mhz)
+	 */
+	ct->ctl_val = ast_ahb_readl(ct->ctl_reg);
+	if (ct->ctl_val == 0xffffffff) {
+		FL_ERR("AST_SF: Failed read from controller control\n");
+		return false;
+	}
+
+	ct->ctl_val = (ct->ctl_val & 0x2000) |
+		(0x00 << 28) | /* Single bit */
+		(0x00 << 24) | /* CE# width 16T */
+		(0x00 << 16) | /* no command */
+		(0x04 <<  8) | /* HCLK/8 */
+		(0x00 <<  6) | /* no dummy cycle */
+		(0x00);	       /* normal read */
+
+	/* Initial read mode is default */
+	ct->ctl_read_val = ct->ctl_val;
+
+	/* Initial read timings all 0 */
+	ct->fread_timing_val = 0;
+
+	/* Configure for read */
+	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
+	ast_ahb_writel(ct->fread_timing_val, ct->fread_timing_reg);
+
+	if (ct->ctl_val & 0x2000)
+		ct->mode_4b = true;
+	else
+		ct->mode_4b = false;
+
+	return true;
+}
+
+static bool ast_sf_init_bmc(struct ast_sf_ctrl *ct)
+{
+	ct->ctl_reg = BMC_SPI_FCTL_CTRL;
+	ct->fread_timing_reg = BMC_SPI_FREAD_TIMING;
+	ct->flash = BMC_FLASH_BASE;
+
+	/*
+	 * Snapshot control reg and sanitize it for our
+	 * use, switching to 1-bit mode, clearing user
+	 * mode if set, etc...
+	 *
+	 * Also configure SPI clock to something safe
+	 * like HCLK/8 (24Mhz)
+	 */
+	ct->ctl_val =
+		(0x00 << 28) | /* Single bit */
+		(0x00 << 24) | /* CE# width 16T */
+		(0x00 << 16) | /* no command */
+		(0x04 <<  8) | /* HCLK/8 */
+		(0x00 <<  6) | /* no dummy cycle */
+		(0x00);	       /* normal read */
+
+	/* Initial read mode is default */
+	ct->ctl_read_val = ct->ctl_val;
+
+	/* Initial read timings all 0 */
+	ct->fread_timing_val = 0;
+
+	/* Configure for read */
+	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
+	ast_ahb_writel(ct->fread_timing_val, ct->fread_timing_reg);
+
+	ct->mode_4b = false;
+
+	return true;
+}
+
+static int ast_mem_set4b(struct spi_flash_ctrl *ctrl __unused,
+			 bool enable __unused)
+{
+	return 0;
+}
+
+static int ast_mem_setup(struct spi_flash_ctrl *ctrl __unused,
+			 uint32_t *tsize __unused)
+{
+	return 0;
+}
+
+static int ast_mem_chipid(struct spi_flash_ctrl *ctrl __unused, uint8_t *id_buf,
+			  uint32_t *id_size)
+{
+	if (*id_size < 3)
+		return -1;
+
+	id_buf[0] = 0xaa;
+	id_buf[1] = 0x55;
+	id_buf[2] = 0xaa;
+	*id_size = 3;
+	return 0;
+}
+
+static int ast_mem_write(struct spi_flash_ctrl *ctrl, uint32_t pos,
+			const void *buf, uint32_t len)
+{
+	struct ast_sf_ctrl *ct = container_of(ctrl, struct ast_sf_ctrl, ops);
+
+	/*
+	 * This only works when the ahb is pointed at system memory.
+	 */
+	return ast_copy_to_ahb(ct->flash + pos, buf, len);
+}
+
+static int ast_mem_erase(struct spi_flash_ctrl *ctrl, uint32_t addr, uint32_t size)
+{
+	struct ast_sf_ctrl *ct = container_of(ctrl, struct ast_sf_ctrl, ops);
+	uint32_t pos, len, end = addr + size;
+	uint64_t zero = 0;
+	int ret;
+
+	for (pos = addr; pos < end; pos += sizeof(zero)) {
+		if (pos + sizeof(zero) > end)
+			len = end - pos;
+		else
+			len = sizeof(zero);
+
+		ret = ast_copy_to_ahb(ct->flash + pos, &zero, len);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+int ast_sf_open(uint8_t type, struct spi_flash_ctrl **ctrl)
+{
+	struct ast_sf_ctrl *ct;
+
+	if (type != AST_SF_TYPE_PNOR && type != AST_SF_TYPE_BMC
+	    && type != AST_SF_TYPE_MEM)
+		return -EINVAL;
+
+	*ctrl = NULL;
+	ct = malloc(sizeof(*ct));
+	if (!ct) {
+		FL_ERR("AST_SF: Failed to allocate\n");
+		return -ENOMEM;
+	}
+	memset(ct, 0, sizeof(*ct));
+	ct->type = type;
+
+	if (type == AST_SF_TYPE_MEM) {
+		ct->ops.cmd_wr = NULL;
+		ct->ops.cmd_rd = NULL;
+		ct->ops.read = ast_sf_read;
+		ct->ops.set_4b = ast_mem_set4b;
+		ct->ops.write = ast_mem_write;
+		ct->ops.erase = ast_mem_erase;
+		ct->ops.setup = ast_mem_setup;
+		ct->ops.chip_id = ast_mem_chipid;
+		ct->flash = PNOR_FLASH_BASE;
+	} else {
+		ct->ops.cmd_wr = ast_sf_cmd_wr;
+		ct->ops.cmd_rd = ast_sf_cmd_rd;
+		ct->ops.set_4b = ast_sf_set_4b;
+		ct->ops.read = ast_sf_read;
+		ct->ops.setup = ast_sf_setup;
+	}
+
+	ast_get_ahb_freq();
+
+	if (type == AST_SF_TYPE_PNOR) {
+		if (!ast_sf_init_pnor(ct))
+			goto fail;
+	} else if (type == AST_SF_TYPE_BMC) {
+		if (!ast_sf_init_bmc(ct))
+			goto fail;
+	}
+
+	*ctrl = &ct->ops;
+
+	return 0;
+ fail:
+	free(ct);
+	return -EIO;
+}
+
+void ast_sf_close(struct spi_flash_ctrl *ctrl)
+{
+	struct ast_sf_ctrl *ct = container_of(ctrl, struct ast_sf_ctrl, ops);
+
+	/* Restore control reg to read */
+	ast_ahb_writel(ct->ctl_read_val, ct->ctl_reg);
+
+	/* Additional cleanup */
+	if (ct->type == AST_SF_TYPE_PNOR) {
+		uint32_t reg = ast_ahb_readl(PNOR_SPI_FCTL_CONF);
+		if (reg != 0xffffffff)
+			ast_ahb_writel(reg & ~1, PNOR_SPI_FCTL_CONF);
+	}
+
+	/* Free the whole lot */
+	free(ct);
+}
diff --git a/objects/pflash/ast.h b/objects/pflash/ast.h
index 848a364..c7bf0cb 100644
--- a/objects/pflash/ast.h
+++ b/objects/pflash/ast.h
@@ -1,66 +1,102 @@
-#ifndef __AST_H
-#define __AST_H
-
-/*
- * AHB bus registers
- */
-
-/* SPI Flash controller #1 (BMC) */
-#define BMC_SPI_FCTL_BASE	0x1E620000
-#define BMC_SPI_FCTL_CTRL	(BMC_SPI_FCTL_BASE + 0x10)
-#define BMC_SPI_FREAD_TIMING	(BMC_SPI_FCTL_BASE + 0x94)
-#define BMC_FLASH_BASE		0x20000000
-
-/* SPI Flash controller #2 (PNOR) */
-#define PNOR_SPI_FCTL_BASE	0x1E630000
-#define PNOR_SPI_FCTL_CONF	(PNOR_SPI_FCTL_BASE + 0x00)
-#define PNOR_SPI_FCTL_CTRL	(PNOR_SPI_FCTL_BASE + 0x04)
-#define PNOR_SPI_FREAD_TIMING	(PNOR_SPI_FCTL_BASE + 0x14)
-#define PNOR_FLASH_BASE		0x30000000
-
-/* LPC registers */
-#define LPC_BASE		0x1e789000
-#define LPC_HICR6		(LPC_BASE + 0x80)
-#define LPC_HICR7		(LPC_BASE + 0x88)
-#define LPC_HICR8		(LPC_BASE + 0x8c)
-
-/* SCU registers */
-#define SCU_BASE		0x1e6e2000
-#define SCU_HW_STRAPPING	(SCU_BASE + 0x70)
-
-/*
- * AHB Accessors
- */
-#ifndef __SKIBOOT__
-#include "io.h"
-#else
-
-/*
- * Register accessors, return byteswapped values
- * (IE. LE registers)
- */
-void ast_ahb_writel(uint32_t val, uint32_t reg);
-uint32_t ast_ahb_readl(uint32_t reg);
-
-/*
- * copy to/from accessors. Cannot cross IDSEL boundaries (256M)
- */
-int ast_copy_to_ahb(uint32_t reg, const void *src, uint32_t len);
-int ast_copy_from_ahb(void *dst, uint32_t reg, uint32_t len);
-
-void ast_io_init(void);
-
-#endif /* __SKIBOOT__ */
-
-/*
- * SPI Flash controllers
- */
-#define AST_SF_TYPE_PNOR	0
-#define AST_SF_TYPE_BMC		1
-
-struct spi_flash_ctrl;
-int ast_sf_open(uint8_t type, struct spi_flash_ctrl **ctrl);
-void ast_sf_close(struct spi_flash_ctrl *ctrl);
-
-
-#endif /* __AST_H */
+/* Copyright 2013-2014 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * 	http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef __AST_H
+#define __AST_H
+
+/*
+ * AHB bus registers
+ */
+
+/* SPI Flash controller #1 (BMC) */
+#define BMC_SPI_FCTL_BASE	0x1E620000
+#define BMC_SPI_FCTL_CE_CTRL	(BMC_SPI_FCTL_BASE + 0x04)
+#define BMC_SPI_FCTL_CTRL	(BMC_SPI_FCTL_BASE + 0x10)
+#define BMC_SPI_FREAD_TIMING	(BMC_SPI_FCTL_BASE + 0x94)
+#define BMC_FLASH_BASE		0x20000000
+
+/* SPI Flash controller #2 (PNOR) */
+#define PNOR_SPI_FCTL_BASE	0x1E630000
+#define PNOR_SPI_FCTL_CONF	(PNOR_SPI_FCTL_BASE + 0x00)
+#define PNOR_SPI_FCTL_CTRL	(PNOR_SPI_FCTL_BASE + 0x04)
+#define PNOR_SPI_FREAD_TIMING	(PNOR_SPI_FCTL_BASE + 0x14)
+#define PNOR_FLASH_BASE		0x30000000
+
+/* LPC registers */
+#define LPC_BASE		0x1e789000
+#define LPC_HICR6		(LPC_BASE + 0x80)
+#define LPC_HICR7		(LPC_BASE + 0x88)
+#define LPC_HICR8		(LPC_BASE + 0x8c)
+#define LPC_iBTCR0		(LPC_BASE + 0x140)
+
+/* VUART1 */
+#define VUART1_BASE		0x1e787000
+#define VUART1_GCTRLA		(VUART1_BASE + 0x20)
+#define VUART1_GCTRLB		(VUART1_BASE + 0x24)
+#define VUART1_ADDRL		(VUART1_BASE + 0x28)
+#define VUART1_ADDRH		(VUART1_BASE + 0x2c)
+
+/* SCU registers */
+#define SCU_BASE		0x1e6e2000
+#define SCU_HW_STRAPPING	(SCU_BASE + 0x70)
+
+/*
+ * AHB Accessors
+ */
+#ifndef __SKIBOOT__
+#include "io.h"
+#else
+
+/*
+ * Register accessors, return byteswapped values
+ * (IE. LE registers)
+ */
+void ast_ahb_writel(uint32_t val, uint32_t reg);
+uint32_t ast_ahb_readl(uint32_t reg);
+
+/*
+ * copy to/from accessors. Cannot cross IDSEL boundaries (256M)
+ */
+int ast_copy_to_ahb(uint32_t reg, const void *src, uint32_t len);
+int ast_copy_from_ahb(void *dst, uint32_t reg, uint32_t len);
+
+void ast_io_init(void);
+bool ast_is_ahb_lpc_pnor(void);
+
+/* UART configuration */
+
+bool ast_is_vuart1_enabled(void);
+void ast_setup_vuart1(uint16_t io_base, uint8_t irq);
+void ast_setup_sio_uart1(uint16_t io_base, uint8_t irq);
+void ast_disable_sio_uart1(void);
+
+/* BT configuration */
+void ast_setup_ibt(uint16_t io_base, uint8_t irq);
+
+#endif /* __SKIBOOT__ */
+
+/*
+ * SPI Flash controllers
+ */
+#define AST_SF_TYPE_PNOR	0
+#define AST_SF_TYPE_BMC		1
+#define AST_SF_TYPE_MEM		2
+
+struct spi_flash_ctrl;
+int ast_sf_open(uint8_t type, struct spi_flash_ctrl **ctrl);
+void ast_sf_close(struct spi_flash_ctrl *ctrl);
+
+
+#endif /* __AST_H */