Spelling fixes
Change-Id: Ia4ded0c195204543c3df671ea471610237f5f44b
Signed-off-by: Gunnar Mills <gmills@us.ibm.com>
diff --git a/fanctl/fan_control.c b/fanctl/fan_control.c
index 0a93a63..30d8213 100644
--- a/fanctl/fan_control.c
+++ b/fanctl/fan_control.c
@@ -203,7 +203,7 @@
/*
* FAN_TACH_OFFSET is specific to Barreleye.
* Barreleye uses NTC7904D HW Monitor as Fan tachometoer.
- * The 13-bit FANIN value is made up Higer part: [12:5],
+ * The 13-bit FANIN value is made up Higher part: [12:5],
* and Lower part: [4:0], which are read from two sensors.
* see: https://www.nuvoton.com/resource-files/NCT7904D_Datasheet_V1.44.pdf
*/
diff --git a/ledctl/led_controller.c b/ledctl/led_controller.c
index 9eda9ee..a2bb4c6 100644
--- a/ledctl/led_controller.c
+++ b/ledctl/led_controller.c
@@ -343,7 +343,7 @@
* Gets the current value of passed in LED file
* Mainly used for reading 'brightness'
* NOTE : It is the responsibility of the caller to allocate
- * sufficient space for buffer. This will read upto user supplied
+ * sufficient space for buffer. This will read up to user supplied
* size -or- entire contents of file whichever is smaller
* ----------------------------------------------------------------
*/
diff --git a/libopenbmc_intf/openbmc_intf.c b/libopenbmc_intf/openbmc_intf.c
index f682ade..5dbe261 100644
--- a/libopenbmc_intf/openbmc_intf.c
+++ b/libopenbmc_intf/openbmc_intf.c
@@ -1937,7 +1937,7 @@
*
* Finishes an operation started with fan_call_set_cooling_zone().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
fan_call_set_cooling_zone_finish (
@@ -1967,7 +1967,7 @@
*
* See fan_call_set_cooling_zone() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
fan_call_set_cooling_zone_sync (
@@ -2033,7 +2033,7 @@
*
* Finishes an operation started with fan_call_get_speed().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
fan_call_get_speed_finish (
@@ -2065,7 +2065,7 @@
*
* See fan_call_get_speed() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
fan_call_get_speed_sync (
@@ -2133,7 +2133,7 @@
*
* Finishes an operation started with fan_call_set_speed().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
fan_call_set_speed_finish (
@@ -2163,7 +2163,7 @@
*
* See fan_call_set_speed() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
fan_call_set_speed_sync (
@@ -4019,7 +4019,7 @@
*
* Finishes an operation started with sensor_value_call_init().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
sensor_value_call_init_finish (
@@ -4048,7 +4048,7 @@
*
* See sensor_value_call_init() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
sensor_value_call_init_sync (
@@ -4112,7 +4112,7 @@
*
* Finishes an operation started with sensor_value_call_get_value().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
sensor_value_call_get_value_finish (
@@ -4144,7 +4144,7 @@
*
* See sensor_value_call_get_value() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
sensor_value_call_get_value_sync (
@@ -4212,7 +4212,7 @@
*
* Finishes an operation started with sensor_value_call_set_value().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
sensor_value_call_set_value_finish (
@@ -4242,7 +4242,7 @@
*
* See sensor_value_call_set_value() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
sensor_value_call_set_value_sync (
@@ -6075,7 +6075,7 @@
*
* Finishes an operation started with sensor_threshold_call_get_state().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
sensor_threshold_call_get_state_finish (
@@ -6107,7 +6107,7 @@
*
* See sensor_threshold_call_get_state() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
sensor_threshold_call_get_state_sync (
@@ -9731,7 +9731,7 @@
*
* Finishes an operation started with process_call_stop().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
process_call_stop_finish (
@@ -9760,7 +9760,7 @@
*
* See process_call_stop() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
process_call_stop_sync (
@@ -10856,7 +10856,7 @@
*
* Finishes an operation started with shared_resource_call_lock().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
shared_resource_call_lock_finish (
@@ -10886,7 +10886,7 @@
*
* See shared_resource_call_lock() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
shared_resource_call_lock_sync (
@@ -10951,7 +10951,7 @@
*
* Finishes an operation started with shared_resource_call_unlock().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
shared_resource_call_unlock_finish (
@@ -10980,7 +10980,7 @@
*
* See shared_resource_call_unlock() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
shared_resource_call_unlock_sync (
@@ -11045,7 +11045,7 @@
*
* Finishes an operation started with shared_resource_call_is_locked().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
shared_resource_call_is_locked_finish (
@@ -11080,7 +11080,7 @@
*
* See shared_resource_call_is_locked() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
shared_resource_call_is_locked_sync (
@@ -12532,7 +12532,7 @@
*
* Finishes an operation started with control_call_init().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_call_init_finish (
@@ -12561,7 +12561,7 @@
*
* See control_call_init() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_call_init_sync (
@@ -13781,7 +13781,7 @@
*
* Finishes an operation started with control_bmc_call_cold_reset().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_bmc_call_cold_reset_finish (
@@ -13810,7 +13810,7 @@
*
* See control_bmc_call_cold_reset() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_bmc_call_cold_reset_sync (
@@ -13873,7 +13873,7 @@
*
* Finishes an operation started with control_bmc_call_warm_reset().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_bmc_call_warm_reset_finish (
@@ -13902,7 +13902,7 @@
*
* See control_bmc_call_warm_reset() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_bmc_call_warm_reset_sync (
@@ -15016,7 +15016,7 @@
*
* Finishes an operation started with control_host_call_boot().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_host_call_boot_finish (
@@ -15045,7 +15045,7 @@
*
* See control_host_call_boot() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_host_call_boot_sync (
@@ -15108,7 +15108,7 @@
*
* Finishes an operation started with control_host_call_shutdown().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_host_call_shutdown_finish (
@@ -15137,7 +15137,7 @@
*
* See control_host_call_shutdown() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_host_call_shutdown_sync (
@@ -15200,7 +15200,7 @@
*
* Finishes an operation started with control_host_call_reboot().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_host_call_reboot_finish (
@@ -15229,7 +15229,7 @@
*
* See control_host_call_reboot() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_host_call_reboot_sync (
@@ -16741,7 +16741,7 @@
*
* Finishes an operation started with control_power_call_set_power_state().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_power_call_set_power_state_finish (
@@ -16771,7 +16771,7 @@
*
* See control_power_call_set_power_state() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_power_call_set_power_state_sync (
@@ -16837,7 +16837,7 @@
*
* Finishes an operation started with control_power_call_get_power_state().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_power_call_get_power_state_finish (
@@ -16869,7 +16869,7 @@
*
* See control_power_call_get_power_state() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
control_power_call_get_power_state_sync (
@@ -19084,7 +19084,7 @@
*
* Finishes an operation started with watchdog_call_start().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
watchdog_call_start_finish (
@@ -19113,7 +19113,7 @@
*
* See watchdog_call_start() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
watchdog_call_start_sync (
@@ -19176,7 +19176,7 @@
*
* Finishes an operation started with watchdog_call_poke().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
watchdog_call_poke_finish (
@@ -19205,7 +19205,7 @@
*
* See watchdog_call_poke() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
watchdog_call_poke_sync (
@@ -19268,7 +19268,7 @@
*
* Finishes an operation started with watchdog_call_stop().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
watchdog_call_stop_finish (
@@ -19297,7 +19297,7 @@
*
* See watchdog_call_stop() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
watchdog_call_stop_sync (
@@ -19363,7 +19363,7 @@
*
* Finishes an operation started with watchdog_call_set().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
watchdog_call_set_finish (
@@ -19393,7 +19393,7 @@
*
* See watchdog_call_set() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
watchdog_call_set_sync (
@@ -20700,7 +20700,7 @@
*
* Finishes an operation started with event_log_call_get_event_log().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
event_log_call_get_event_log_finish (
@@ -20732,7 +20732,7 @@
*
* See event_log_call_get_event_log() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
event_log_call_get_event_log_sync (
@@ -22333,7 +22333,7 @@
*
* Finishes an operation started with flash_call_update().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
flash_call_update_finish (
@@ -22363,7 +22363,7 @@
*
* See flash_call_update() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
flash_call_update_sync (
@@ -22431,7 +22431,7 @@
*
* Finishes an operation started with flash_call_error().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
flash_call_error_finish (
@@ -22461,7 +22461,7 @@
*
* See flash_call_error() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
flash_call_error_sync (
@@ -22526,7 +22526,7 @@
*
* Finishes an operation started with flash_call_done().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
flash_call_done_finish (
@@ -22555,7 +22555,7 @@
*
* See flash_call_done() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
flash_call_done_sync (
@@ -22624,7 +22624,7 @@
*
* Finishes an operation started with flash_call_update_via_tftp().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
flash_call_update_via_tftp_finish (
@@ -22655,7 +22655,7 @@
*
* See flash_call_update_via_tftp() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
flash_call_update_via_tftp_sync (
@@ -22722,7 +22722,7 @@
*
* Finishes an operation started with flash_call_init().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
flash_call_init_finish (
@@ -22751,7 +22751,7 @@
*
* See flash_call_init() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
flash_call_init_sync (
@@ -24478,7 +24478,7 @@
*
* Finishes an operation started with flash_control_call_flash().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
flash_control_call_flash_finish (
@@ -24509,7 +24509,7 @@
*
* See flash_control_call_flash() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
flash_control_call_flash_sync (
@@ -26048,7 +26048,7 @@
*
* Finishes an operation started with button_call_is_on().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
button_call_is_on_finish (
@@ -26080,7 +26080,7 @@
*
* See button_call_is_on() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
button_call_is_on_sync (
@@ -26145,7 +26145,7 @@
*
* Finishes an operation started with button_call_sim_press().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
button_call_sim_press_finish (
@@ -26174,7 +26174,7 @@
*
* See button_call_sim_press() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
button_call_sim_press_sync (
@@ -26237,7 +26237,7 @@
*
* Finishes an operation started with button_call_sim_long_press().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
button_call_sim_long_press_finish (
@@ -26266,7 +26266,7 @@
*
* See button_call_sim_long_press() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
button_call_sim_long_press_sync (
@@ -27809,7 +27809,7 @@
*
* Finishes an operation started with led_call_set_on().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
led_call_set_on_finish (
@@ -27838,7 +27838,7 @@
*
* See led_call_set_on() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
led_call_set_on_sync (
@@ -27901,7 +27901,7 @@
*
* Finishes an operation started with led_call_set_off().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
led_call_set_off_finish (
@@ -27930,7 +27930,7 @@
*
* See led_call_set_off() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
led_call_set_off_sync (
@@ -27993,7 +27993,7 @@
*
* Finishes an operation started with led_call_set_blink_slow().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
led_call_set_blink_slow_finish (
@@ -28022,7 +28022,7 @@
*
* See led_call_set_blink_slow() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
led_call_set_blink_slow_sync (
@@ -28085,7 +28085,7 @@
*
* Finishes an operation started with led_call_set_blink_fast().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
led_call_set_blink_fast_finish (
@@ -28114,7 +28114,7 @@
*
* See led_call_set_blink_fast() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
led_call_set_blink_fast_sync (
@@ -29509,7 +29509,7 @@
*
* Finishes an operation started with host_ipmi_call_send_message().
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
host_ipmi_call_send_message_finish (
@@ -29545,7 +29545,7 @@
*
* See host_ipmi_call_send_message() for the asynchronous version of this method.
*
- * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
*/
gboolean
host_ipmi_call_send_message_sync (
diff --git a/pysensormgr/sensor_manager2.py b/pysensormgr/sensor_manager2.py
index 8273225..9e423e0 100644
--- a/pysensormgr/sensor_manager2.py
+++ b/pysensormgr/sensor_manager2.py
@@ -50,7 +50,7 @@
root_sensor = SensorManager(bus, OBJ_PATH)
## instantiate non-polling sensors
- ## these don't need to be in seperate process
+ ## these don't need to be in separate process
if has_system:
for (id, the_sensor) in System.MISC_SENSORS.items():
sensor_class = the_sensor['class']
diff --git a/pysystemmgr/system_manager.py b/pysystemmgr/system_manager.py
index ff7fd69..575304b 100644
--- a/pysystemmgr/system_manager.py
+++ b/pysystemmgr/system_manager.py
@@ -133,7 +133,7 @@
# Get the FRU area names defined in ID_LOOKUP table given a fru_id.
# If serval areas are defined for a fru_id, the areas are returned
- # together as a string with each area name seperated with ','.
+ # together as a string with each area name separated with ','.
# If no fru area defined in ID_LOOKUP, an empty string will be returned.
@dbus.service.method(DBUS_NAME, in_signature='y', out_signature='s')
def getFRUArea(self, fru_id):
diff --git a/pytools/obmcutil b/pytools/obmcutil
index 30db80c..4b2236b 100644
--- a/pytools/obmcutil
+++ b/pytools/obmcutil
@@ -249,7 +249,7 @@
def main():
dbus.mainloop.glib.DBusGMainLoop(set_as_default=True)
- # Conditionally add the `chassiskill` commmand based on whether the
+ # Conditionally add the `chassiskill` command based on whether the
# required GPIO configuration is present in the system description.
if can_chassiskill():
descriptors['chassiskill'] = None