commit aab61990a8eda4c5343e92999d461993f0840213
author Lei YU <mine260309@gmail.com> Thu Nov 03 22:52:36 2016 +0800
committer Lei YU <mine260309@gmail.com> Wed Nov 16 00:23:59 2016 +0800
tree 35ebe1fe9245bbd2b1381d905e480dc47af1947c
parent ead1c62dca8f8237ad3a898ca0af4d48e3855ff2

Fix GPIO and remove unused ones from Romulus.py

1. Remove unused GPIO configs;
2. Add comments of GPIO names in schematic for CRONUS_SEL,
   POWER_BUTTON, RESET_BUTTON;
3. Fix the GPIO configs for BMC_THROTTLE, IDBTN;

The GPIO names are hard-coded for now and some of them conflict with P8.
A future task will abstract the GPIO names so we can use names in schematic.
Once the task is done, this file will be updated to use GPIO names in
schematic.

Change-Id: Id14b64c2546ae0538bb5a04c535f310f6933c97b
Signed-off-by: Lei YU <mine260309@gmail.com>

configs/Romulus.py

diff --git a/configs/Romulus.py b/configs/Romulus.py
index 09cabe4..46de4ab 100644
--- a/configs/Romulus.py
+++ b/configs/Romulus.py
@@ -1,9 +1,5 @@
 # Romulus.py
 #
-# Copy of Witherspoon.py with membufs removed
-# TODO:
-#  - Fix GPIOs
-#
 
 SYSTEM_STATES = [
     'BASE_APPS',
@@ -216,31 +212,10 @@
         {'gpio_pin': 'N5', 'direction': 'out'}
 GPIO_CONFIG['CHECKSTOP'] = \
         {'gpio_pin': 'J2', 'direction': 'falling'}
-
-#FIXME: romulus: GPIOD3/D4 is NIC_FUNC_MODE0/1
-#GPIO_CONFIG['PHY_RST_N'] = \
-#        {'gpio_pin': 'D3', 'direction': 'out'}
-#GPIO_CONFIG['HDD_PWR_EN'] = \
-#        {'gpio_pin': 'D4', 'direction': 'out'}
-
 GPIO_CONFIG['BMC_CP0_RESET_N'] = \
         {'gpio_pin': 'A1', 'direction': 'out'}
-
-#FIXME: romulus: GPIOA1 is BMC_CP0_RESET_N
-#GPIO_CONFIG['CP0_DEVICES_RESET_N'] = \
-#        {'gpio_pin': 'A1', 'direction': 'out'}
-
-#FIXME: Is it BMC_CP0_PERST_ENABLE or BMC_CP0_PERST_ENABLE_R
 GPIO_CONFIG['BMC_CP0_PERST_ENABLE_R'] = \
         {'gpio_pin': 'A3', 'direction': 'out'}
-#GPIO_CONFIG['BMC_CP0_PERST_ENABLE'] = \
-#        {'gpio_pin': 'A3', 'direction': 'out'}
-
-# Romulus GPIOB4 is not connected
-#GPIO_CONFIG['BMC_UCD_LATCH_LE'] = \
-#        {'gpio_pin': 'B4', 'direction': 'out'}
-
-#FIXME: romulus: SOFT_FSI_CLK: AA0, SOFT_FSI_DAT: AA2, see romulus_rev1_0 page 69, 71
 GPIO_CONFIG['FSI_DATA'] = \
         {'gpio_pin': 'AA2', 'direction': 'out'}
 GPIO_CONFIG['FSI_CLK'] = \
@@ -248,22 +223,22 @@
 GPIO_CONFIG['FSI_ENABLE'] = \
         {'gpio_pin': 'D0', 'direction': 'out'}
 
-# romulus GPIOA6 is DBG_CP0_MUX_SEL
+# DBG_CP0_MUX_SEL
 GPIO_CONFIG['CRONUS_SEL'] = \
         {'gpio_pin': 'A6', 'direction': 'out'}
+GPIO_CONFIG['BMC_THROTTLE'] = \
+        {'gpio_pin': 'J3', 'direction': 'out'}
+GPIO_CONFIG['IDBTN']       = \
+        {'gpio_pin': 'Q7', 'direction': 'out'}
 
-# romulus: PM_FP_PWRBTN_IN_L
+# PM_FP_PWRBTN_IN_L
 GPIO_CONFIG['POWER_BUTTON'] = \
         {'gpio_pin': 'I3', 'direction': 'in'}
-# romulus: PM_NMIBTN_IN_L
+
+# PM_NMIBTN_IN_L
 GPIO_CONFIG['RESET_BUTTON'] = \
         {'gpio_pin': 'J1', 'direction': 'in'}
 
-#Romulus GPIOP7 is not connected
-#GPIO_CONFIG['PE_MEZZB_PRSNT_N'] = \
-#        {'gpio_pin': 'P7', 'direction': 'in'}
-
-
 HWMON_CONFIG = {
     '4-0050' : {
         'names' : {
@@ -348,13 +323,14 @@
 }
 
 POWER_CONFIG = {
-    'latch_out' : 'BMC_UCD_LATCH_LE',
     'power_good_in' : 'SYS_PWROK_BUFF',
     'power_up_outs' : [
         ('SOFTWARE_PGOOD', True),
         ('BMC_POWER_UP', True),
     ],
     'reset_outs' : [
+        ('BMC_CP0_RESET_N', False),
+        ('BMC_CP0_PERST_ENABLE_R', False),
     ],
 }