Remove the GPIOs from Palmetto.py
They are now obtained from a JSON file.
Change-Id: Id8ab8c33c6d6f83f2e1dcb865c9479b35b7e0ef9
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
diff --git a/configs/Palmetto.py b/configs/Palmetto.py
index 10fe0bd..1934a2f 100644
--- a/configs/Palmetto.py
+++ b/configs/Palmetto.py
@@ -83,54 +83,6 @@
}
}
-GPIO_CONFIG = {}
-GPIO_CONFIG['FSI_CLK'] = { 'gpio_pin': 'A4', 'direction': 'out' }
-GPIO_CONFIG['FSI_DATA'] = { 'gpio_pin': 'A5', 'direction': 'out' }
-GPIO_CONFIG['FSI_ENABLE'] = { 'gpio_pin': 'D0', 'direction': 'out' }
-GPIO_CONFIG['POWER_PIN'] = { 'gpio_pin': 'E1', 'direction': 'out' }
-GPIO_CONFIG['CRONUS_SEL'] = { 'gpio_pin': 'A6', 'direction': 'out' }
-GPIO_CONFIG['PGOOD'] = { 'gpio_pin': 'C7', 'direction': 'in' }
-GPIO_CONFIG['BMC_THROTTLE'] = { 'gpio_pin': 'J3', 'direction': 'out' }
-GPIO_CONFIG['IDBTN'] = { 'gpio_pin': 'Q7', 'direction': 'out' }
-GPIO_CONFIG['POWER_BUTTON'] = { 'gpio_pin': 'E0', 'direction': 'both' }
-GPIO_CONFIG['PCIE_RESET'] = { 'gpio_pin': 'B5', 'direction': 'out' }
-GPIO_CONFIG['USB_RESET'] = { 'gpio_pin': 'B6', 'direction': 'out' }
-GPIO_CONFIG['SLOT0_RISER_PRESENT'] = { 'gpio_pin': 'N0', 'direction': 'in' }
-GPIO_CONFIG['SLOT1_RISER_PRESENT'] = { 'gpio_pin': 'N1', 'direction': 'in' }
-GPIO_CONFIG['SLOT2_RISER_PRESENT'] = { 'gpio_pin': 'N2', 'direction': 'in' }
-GPIO_CONFIG['SLOT0_PRESENT'] = { 'gpio_pin': 'N3', 'direction': 'in' }
-GPIO_CONFIG['SLOT1_PRESENT'] = { 'gpio_pin': 'N4', 'direction': 'in' }
-GPIO_CONFIG['SLOT2_PRESENT'] = { 'gpio_pin': 'N5', 'direction': 'in' }
-GPIO_CONFIG['MEZZ0_PRESENT'] = { 'gpio_pin': 'O0', 'direction': 'in' }
-GPIO_CONFIG['MEZZ1_PRESENT'] = { 'gpio_pin': 'O1', 'direction': 'in' }
-GPIO_CONFIG['CHECKSTOP'] = { 'gpio_pin': 'P5', 'direction': 'falling' }
-
-GPIO_CONFIGS = {
- 'power_config' : {
- 'power_good_in' : 'PGOOD',
- 'power_up_outs' : [
- ('POWER_PIN', False),
- ],
- 'reset_outs' : [
- ('USB_RESET', False),
- ],
- 'pci_reset_outs': [
- # net name, polarity, reset hold
- ('PCIE_RESET', False, False),
- ],
- },
- 'hostctl_config' : {
- 'fsi_data' : 'FSI_DATA',
- 'fsi_clk' : 'FSI_CLK',
- 'fsi_enable' : 'FSI_ENABLE',
- 'cronus_sel' : 'CRONUS_SEL',
- 'optionals' : [
- ('BMC_THROTTLE', True),
- ('IDBTN', False),
- ],
- },
-}
-
# Miscellaneous non-poll sensor with system specific properties.
# The sensor id is the same as those defined in ID_LOOKUP['SENSOR'].
MISC_SENSORS = {