diff --git a/interfaces/control.c b/interfaces/control.c
new file mode 100644
index 0000000..3eab9e1
--- /dev/null
+++ b/interfaces/control.c
@@ -0,0 +1,5971 @@
+/*
+ * Generated by gdbus-codegen 2.40.2. DO NOT EDIT.
+ *
+ * The license of this code is the same as for the source it was derived from.
+ */
+
+#ifdef HAVE_CONFIG_H
+#  include "config.h"
+#endif
+
+#include "interfaces/control.h"
+
+#include <string.h>
+#ifdef G_OS_UNIX
+#  include <gio/gunixfdlist.h>
+#endif
+
+typedef struct
+{
+  GDBusArgInfo parent_struct;
+  gboolean use_gvariant;
+} _ExtendedGDBusArgInfo;
+
+typedef struct
+{
+  GDBusMethodInfo parent_struct;
+  const gchar *signal_name;
+  gboolean pass_fdlist;
+} _ExtendedGDBusMethodInfo;
+
+typedef struct
+{
+  GDBusSignalInfo parent_struct;
+  const gchar *signal_name;
+} _ExtendedGDBusSignalInfo;
+
+typedef struct
+{
+  GDBusPropertyInfo parent_struct;
+  const gchar *hyphen_name;
+  gboolean use_gvariant;
+} _ExtendedGDBusPropertyInfo;
+
+typedef struct
+{
+  GDBusInterfaceInfo parent_struct;
+  const gchar *hyphen_name;
+} _ExtendedGDBusInterfaceInfo;
+
+typedef struct
+{
+  const _ExtendedGDBusPropertyInfo *info;
+  guint prop_id;
+  GValue orig_value; /* the value before the change */
+} ChangedProperty;
+
+static void
+_changed_property_free (ChangedProperty *data)
+{
+  g_value_unset (&data->orig_value);
+  g_free (data);
+}
+
+static gboolean
+_g_strv_equal0 (gchar **a, gchar **b)
+{
+  gboolean ret = FALSE;
+  guint n;
+  if (a == NULL && b == NULL)
+    {
+      ret = TRUE;
+      goto out;
+    }
+  if (a == NULL || b == NULL)
+    goto out;
+  if (g_strv_length (a) != g_strv_length (b))
+    goto out;
+  for (n = 0; a[n] != NULL; n++)
+    if (g_strcmp0 (a[n], b[n]) != 0)
+      goto out;
+  ret = TRUE;
+out:
+  return ret;
+}
+
+static gboolean
+_g_variant_equal0 (GVariant *a, GVariant *b)
+{
+  gboolean ret = FALSE;
+  if (a == NULL && b == NULL)
+    {
+      ret = TRUE;
+      goto out;
+    }
+  if (a == NULL || b == NULL)
+    goto out;
+  ret = g_variant_equal (a, b);
+out:
+  return ret;
+}
+
+G_GNUC_UNUSED static gboolean
+_g_value_equal (const GValue *a, const GValue *b)
+{
+  gboolean ret = FALSE;
+  g_assert (G_VALUE_TYPE (a) == G_VALUE_TYPE (b));
+  switch (G_VALUE_TYPE (a))
+    {
+      case G_TYPE_BOOLEAN:
+        ret = (g_value_get_boolean (a) == g_value_get_boolean (b));
+        break;
+      case G_TYPE_UCHAR:
+        ret = (g_value_get_uchar (a) == g_value_get_uchar (b));
+        break;
+      case G_TYPE_INT:
+        ret = (g_value_get_int (a) == g_value_get_int (b));
+        break;
+      case G_TYPE_UINT:
+        ret = (g_value_get_uint (a) == g_value_get_uint (b));
+        break;
+      case G_TYPE_INT64:
+        ret = (g_value_get_int64 (a) == g_value_get_int64 (b));
+        break;
+      case G_TYPE_UINT64:
+        ret = (g_value_get_uint64 (a) == g_value_get_uint64 (b));
+        break;
+      case G_TYPE_DOUBLE:
+        {
+          /* Avoid -Wfloat-equal warnings by doing a direct bit compare */
+          gdouble da = g_value_get_double (a);
+          gdouble db = g_value_get_double (b);
+          ret = memcmp (&da, &db, sizeof (gdouble)) == 0;
+        }
+        break;
+      case G_TYPE_STRING:
+        ret = (g_strcmp0 (g_value_get_string (a), g_value_get_string (b)) == 0);
+        break;
+      case G_TYPE_VARIANT:
+        ret = _g_variant_equal0 (g_value_get_variant (a), g_value_get_variant (b));
+        break;
+      default:
+        if (G_VALUE_TYPE (a) == G_TYPE_STRV)
+          ret = _g_strv_equal0 (g_value_get_boxed (a), g_value_get_boxed (b));
+        else
+          g_critical ("_g_value_equal() does not handle type %s", g_type_name (G_VALUE_TYPE (a)));
+        break;
+    }
+  return ret;
+}
+
+/* ------------------------------------------------------------------------
+ * Code for interface org.openbmc.Control
+ * ------------------------------------------------------------------------
+ */
+
+/**
+ * SECTION:Control
+ * @title: Control
+ * @short_description: Generated C code for the org.openbmc.Control D-Bus interface
+ *
+ * This section contains code for working with the <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link> D-Bus interface in C.
+ */
+
+/* ---- Introspection data for org.openbmc.Control ---- */
+
+static const _ExtendedGDBusArgInfo _control_method_info_set_poll_interval_IN_ARG_poll_interval =
+{
+  {
+    -1,
+    (gchar *) "poll_interval",
+    (gchar *) "i",
+    NULL
+  },
+  FALSE
+};
+
+static const _ExtendedGDBusArgInfo * const _control_method_info_set_poll_interval_IN_ARG_pointers[] =
+{
+  &_control_method_info_set_poll_interval_IN_ARG_poll_interval,
+  NULL
+};
+
+static const _ExtendedGDBusMethodInfo _control_method_info_set_poll_interval =
+{
+  {
+    -1,
+    (gchar *) "setPollInterval",
+    (GDBusArgInfo **) &_control_method_info_set_poll_interval_IN_ARG_pointers,
+    NULL,
+    NULL
+  },
+  "handle-set-poll-interval",
+  FALSE
+};
+
+static const _ExtendedGDBusMethodInfo * const _control_method_info_pointers[] =
+{
+  &_control_method_info_set_poll_interval,
+  NULL
+};
+
+static const _ExtendedGDBusArgInfo _control_signal_info_heartbeat_ARG_bus_name =
+{
+  {
+    -1,
+    (gchar *) "bus_name",
+    (gchar *) "s",
+    NULL
+  },
+  FALSE
+};
+
+static const _ExtendedGDBusArgInfo * const _control_signal_info_heartbeat_ARG_pointers[] =
+{
+  &_control_signal_info_heartbeat_ARG_bus_name,
+  NULL
+};
+
+static const _ExtendedGDBusSignalInfo _control_signal_info_heartbeat =
+{
+  {
+    -1,
+    (gchar *) "Heartbeat",
+    (GDBusArgInfo **) &_control_signal_info_heartbeat_ARG_pointers,
+    NULL
+  },
+  "heartbeat"
+};
+
+static const _ExtendedGDBusSignalInfo * const _control_signal_info_pointers[] =
+{
+  &_control_signal_info_heartbeat,
+  NULL
+};
+
+static const _ExtendedGDBusPropertyInfo _control_property_info_poll_interval =
+{
+  {
+    -1,
+    (gchar *) "poll_interval",
+    (gchar *) "i",
+    G_DBUS_PROPERTY_INFO_FLAGS_READABLE,
+    NULL
+  },
+  "poll-interval",
+  FALSE
+};
+
+static const _ExtendedGDBusPropertyInfo _control_property_info_heatbeat =
+{
+  {
+    -1,
+    (gchar *) "heatbeat",
+    (gchar *) "i",
+    G_DBUS_PROPERTY_INFO_FLAGS_READABLE,
+    NULL
+  },
+  "heatbeat",
+  FALSE
+};
+
+static const _ExtendedGDBusPropertyInfo * const _control_property_info_pointers[] =
+{
+  &_control_property_info_poll_interval,
+  &_control_property_info_heatbeat,
+  NULL
+};
+
+static const _ExtendedGDBusInterfaceInfo _control_interface_info =
+{
+  {
+    -1,
+    (gchar *) "org.openbmc.Control",
+    (GDBusMethodInfo **) &_control_method_info_pointers,
+    (GDBusSignalInfo **) &_control_signal_info_pointers,
+    (GDBusPropertyInfo **) &_control_property_info_pointers,
+    NULL
+  },
+  "control",
+};
+
+
+/**
+ * control_interface_info:
+ *
+ * Gets a machine-readable description of the <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link> D-Bus interface.
+ *
+ * Returns: (transfer none): A #GDBusInterfaceInfo. Do not free.
+ */
+GDBusInterfaceInfo *
+control_interface_info (void)
+{
+  return (GDBusInterfaceInfo *) &_control_interface_info.parent_struct;
+}
+
+/**
+ * control_override_properties:
+ * @klass: The class structure for a #GObject<!-- -->-derived class.
+ * @property_id_begin: The property id to assign to the first overridden property.
+ *
+ * Overrides all #GObject properties in the #Control interface for a concrete class.
+ * The properties are overridden in the order they are defined.
+ *
+ * Returns: The last property id.
+ */
+guint
+control_override_properties (GObjectClass *klass, guint property_id_begin)
+{
+  g_object_class_override_property (klass, property_id_begin++, "poll-interval");
+  g_object_class_override_property (klass, property_id_begin++, "heatbeat");
+  return property_id_begin - 1;
+}
+
+
+
+/**
+ * Control:
+ *
+ * Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link>.
+ */
+
+/**
+ * ControlIface:
+ * @parent_iface: The parent interface.
+ * @handle_set_poll_interval: Handler for the #Control::handle-set-poll-interval signal.
+ * @get_heatbeat: Getter for the #Control:heatbeat property.
+ * @get_poll_interval: Getter for the #Control:poll-interval property.
+ * @heartbeat: Handler for the #Control::heartbeat signal.
+ *
+ * Virtual table for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link>.
+ */
+
+typedef ControlIface ControlInterface;
+G_DEFINE_INTERFACE (Control, control, G_TYPE_OBJECT);
+
+static void
+control_default_init (ControlIface *iface)
+{
+  /* GObject signals for incoming D-Bus method calls: */
+  /**
+   * Control::handle-set-poll-interval:
+   * @object: A #Control.
+   * @invocation: A #GDBusMethodInvocation.
+   * @arg_poll_interval: Argument passed by remote caller.
+   *
+   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-Control.setPollInterval">setPollInterval()</link> D-Bus method.
+   *
+   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call control_complete_set_poll_interval() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
+   *
+   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
+   */
+  g_signal_new ("handle-set-poll-interval",
+    G_TYPE_FROM_INTERFACE (iface),
+    G_SIGNAL_RUN_LAST,
+    G_STRUCT_OFFSET (ControlIface, handle_set_poll_interval),
+    g_signal_accumulator_true_handled,
+    NULL,
+    g_cclosure_marshal_generic,
+    G_TYPE_BOOLEAN,
+    2,
+    G_TYPE_DBUS_METHOD_INVOCATION, G_TYPE_INT);
+
+  /* GObject signals for received D-Bus signals: */
+  /**
+   * Control::heartbeat:
+   * @object: A #Control.
+   * @arg_bus_name: Argument.
+   *
+   * On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-Control.Heartbeat">"Heartbeat"</link> is received.
+   *
+   * On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.
+   */
+  g_signal_new ("heartbeat",
+    G_TYPE_FROM_INTERFACE (iface),
+    G_SIGNAL_RUN_LAST,
+    G_STRUCT_OFFSET (ControlIface, heartbeat),
+    NULL,
+    NULL,
+    g_cclosure_marshal_generic,
+    G_TYPE_NONE,
+    1, G_TYPE_STRING);
+
+  /* GObject properties for D-Bus properties: */
+  /**
+   * Control:poll-interval:
+   *
+   * Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-Control.poll_interval">"poll_interval"</link>.
+   *
+   * Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
+   */
+  g_object_interface_install_property (iface,
+    g_param_spec_int ("poll-interval", "poll_interval", "poll_interval", G_MININT32, G_MAXINT32, 0, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
+  /**
+   * Control:heatbeat:
+   *
+   * Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-Control.heatbeat">"heatbeat"</link>.
+   *
+   * Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
+   */
+  g_object_interface_install_property (iface,
+    g_param_spec_int ("heatbeat", "heatbeat", "heatbeat", G_MININT32, G_MAXINT32, 0, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
+}
+
+/**
+ * control_get_poll_interval: (skip)
+ * @object: A #Control.
+ *
+ * Gets the value of the <link linkend="gdbus-property-org-openbmc-Control.poll_interval">"poll_interval"</link> D-Bus property.
+ *
+ * Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
+ *
+ * Returns: The property value.
+ */
+gint 
+control_get_poll_interval (Control *object)
+{
+  return CONTROL_GET_IFACE (object)->get_poll_interval (object);
+}
+
+/**
+ * control_set_poll_interval: (skip)
+ * @object: A #Control.
+ * @value: The value to set.
+ *
+ * Sets the <link linkend="gdbus-property-org-openbmc-Control.poll_interval">"poll_interval"</link> D-Bus property to @value.
+ *
+ * Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.
+ */
+void
+control_set_poll_interval (Control *object, gint value)
+{
+  g_object_set (G_OBJECT (object), "poll-interval", value, NULL);
+}
+
+/**
+ * control_get_heatbeat: (skip)
+ * @object: A #Control.
+ *
+ * Gets the value of the <link linkend="gdbus-property-org-openbmc-Control.heatbeat">"heatbeat"</link> D-Bus property.
+ *
+ * Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
+ *
+ * Returns: The property value.
+ */
+gint 
+control_get_heatbeat (Control *object)
+{
+  return CONTROL_GET_IFACE (object)->get_heatbeat (object);
+}
+
+/**
+ * control_set_heatbeat: (skip)
+ * @object: A #Control.
+ * @value: The value to set.
+ *
+ * Sets the <link linkend="gdbus-property-org-openbmc-Control.heatbeat">"heatbeat"</link> D-Bus property to @value.
+ *
+ * Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.
+ */
+void
+control_set_heatbeat (Control *object, gint value)
+{
+  g_object_set (G_OBJECT (object), "heatbeat", value, NULL);
+}
+
+/**
+ * control_emit_heartbeat:
+ * @object: A #Control.
+ * @arg_bus_name: Argument to pass with the signal.
+ *
+ * Emits the <link linkend="gdbus-signal-org-openbmc-Control.Heartbeat">"Heartbeat"</link> D-Bus signal.
+ */
+void
+control_emit_heartbeat (
+    Control *object,
+    const gchar *arg_bus_name)
+{
+  g_signal_emit_by_name (object, "heartbeat", arg_bus_name);
+}
+
+/**
+ * control_call_set_poll_interval:
+ * @proxy: A #ControlProxy.
+ * @arg_poll_interval: Argument to pass with the method invocation.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
+ * @user_data: User data to pass to @callback.
+ *
+ * Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-Control.setPollInterval">setPollInterval()</link> D-Bus method on @proxy.
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call control_call_set_poll_interval_finish() to get the result of the operation.
+ *
+ * See control_call_set_poll_interval_sync() for the synchronous, blocking version of this method.
+ */
+void
+control_call_set_poll_interval (
+    Control *proxy,
+    gint arg_poll_interval,
+    GCancellable *cancellable,
+    GAsyncReadyCallback callback,
+    gpointer user_data)
+{
+  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
+    "setPollInterval",
+    g_variant_new ("(i)",
+                   arg_poll_interval),
+    G_DBUS_CALL_FLAGS_NONE,
+    -1,
+    cancellable,
+    callback,
+    user_data);
+}
+
+/**
+ * control_call_set_poll_interval_finish:
+ * @proxy: A #ControlProxy.
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_call_set_poll_interval().
+ * @error: Return location for error or %NULL.
+ *
+ * Finishes an operation started with control_call_set_poll_interval().
+ *
+ * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ */
+gboolean
+control_call_set_poll_interval_finish (
+    Control *proxy,
+    GAsyncResult *res,
+    GError **error)
+{
+  GVariant *_ret;
+  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
+  if (_ret == NULL)
+    goto _out;
+  g_variant_get (_ret,
+                 "()");
+  g_variant_unref (_ret);
+_out:
+  return _ret != NULL;
+}
+
+/**
+ * control_call_set_poll_interval_sync:
+ * @proxy: A #ControlProxy.
+ * @arg_poll_interval: Argument to pass with the method invocation.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL.
+ *
+ * Synchronously invokes the <link linkend="gdbus-method-org-openbmc-Control.setPollInterval">setPollInterval()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
+ *
+ * See control_call_set_poll_interval() for the asynchronous version of this method.
+ *
+ * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ */
+gboolean
+control_call_set_poll_interval_sync (
+    Control *proxy,
+    gint arg_poll_interval,
+    GCancellable *cancellable,
+    GError **error)
+{
+  GVariant *_ret;
+  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
+    "setPollInterval",
+    g_variant_new ("(i)",
+                   arg_poll_interval),
+    G_DBUS_CALL_FLAGS_NONE,
+    -1,
+    cancellable,
+    error);
+  if (_ret == NULL)
+    goto _out;
+  g_variant_get (_ret,
+                 "()");
+  g_variant_unref (_ret);
+_out:
+  return _ret != NULL;
+}
+
+/**
+ * control_complete_set_poll_interval:
+ * @object: A #Control.
+ * @invocation: (transfer full): A #GDBusMethodInvocation.
+ *
+ * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-Control.setPollInterval">setPollInterval()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
+ *
+ * This method will free @invocation, you cannot use it afterwards.
+ */
+void
+control_complete_set_poll_interval (
+    Control *object,
+    GDBusMethodInvocation *invocation)
+{
+  g_dbus_method_invocation_return_value (invocation,
+    g_variant_new ("()"));
+}
+
+/* ------------------------------------------------------------------------ */
+
+/**
+ * ControlProxy:
+ *
+ * The #ControlProxy structure contains only private data and should only be accessed using the provided API.
+ */
+
+/**
+ * ControlProxyClass:
+ * @parent_class: The parent class.
+ *
+ * Class structure for #ControlProxy.
+ */
+
+struct _ControlProxyPrivate
+{
+  GData *qdata;
+};
+
+static void control_proxy_iface_init (ControlIface *iface);
+
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+G_DEFINE_TYPE_WITH_CODE (ControlProxy, control_proxy, G_TYPE_DBUS_PROXY,
+                         G_ADD_PRIVATE (ControlProxy)
+                         G_IMPLEMENT_INTERFACE (TYPE_CONTROL, control_proxy_iface_init));
+
+#else
+G_DEFINE_TYPE_WITH_CODE (ControlProxy, control_proxy, G_TYPE_DBUS_PROXY,
+                         G_IMPLEMENT_INTERFACE (TYPE_CONTROL, control_proxy_iface_init));
+
+#endif
+static void
+control_proxy_finalize (GObject *object)
+{
+  ControlProxy *proxy = CONTROL_PROXY (object);
+  g_datalist_clear (&proxy->priv->qdata);
+  G_OBJECT_CLASS (control_proxy_parent_class)->finalize (object);
+}
+
+static void
+control_proxy_get_property (GObject      *object,
+  guint         prop_id,
+  GValue       *value,
+  GParamSpec   *pspec G_GNUC_UNUSED)
+{
+  const _ExtendedGDBusPropertyInfo *info;
+  GVariant *variant;
+  g_assert (prop_id != 0 && prop_id - 1 < 2);
+  info = _control_property_info_pointers[prop_id - 1];
+  variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (object), info->parent_struct.name);
+  if (info->use_gvariant)
+    {
+      g_value_set_variant (value, variant);
+    }
+  else
+    {
+      if (variant != NULL)
+        g_dbus_gvariant_to_gvalue (variant, value);
+    }
+  if (variant != NULL)
+    g_variant_unref (variant);
+}
+
+static void
+control_proxy_set_property_cb (GDBusProxy *proxy,
+  GAsyncResult *res,
+  gpointer      user_data)
+{
+  const _ExtendedGDBusPropertyInfo *info = user_data;
+  GError *error;
+  GVariant *_ret;
+  error = NULL;
+  _ret = g_dbus_proxy_call_finish (proxy, res, &error);
+  if (!_ret)
+    {
+      g_warning ("Error setting property '%s' on interface org.openbmc.Control: %s (%s, %d)",
+                 info->parent_struct.name, 
+                 error->message, g_quark_to_string (error->domain), error->code);
+      g_error_free (error);
+    }
+  else
+    {
+      g_variant_unref (_ret);
+    }
+}
+
+static void
+control_proxy_set_property (GObject      *object,
+  guint         prop_id,
+  const GValue *value,
+  GParamSpec   *pspec G_GNUC_UNUSED)
+{
+  const _ExtendedGDBusPropertyInfo *info;
+  GVariant *variant;
+  g_assert (prop_id != 0 && prop_id - 1 < 2);
+  info = _control_property_info_pointers[prop_id - 1];
+  variant = g_dbus_gvalue_to_gvariant (value, G_VARIANT_TYPE (info->parent_struct.signature));
+  g_dbus_proxy_call (G_DBUS_PROXY (object),
+    "org.freedesktop.DBus.Properties.Set",
+    g_variant_new ("(ssv)", "org.openbmc.Control", info->parent_struct.name, variant),
+    G_DBUS_CALL_FLAGS_NONE,
+    -1,
+    NULL, (GAsyncReadyCallback) control_proxy_set_property_cb, (GDBusPropertyInfo *) &info->parent_struct);
+  g_variant_unref (variant);
+}
+
+static void
+control_proxy_g_signal (GDBusProxy *proxy,
+  const gchar *sender_name G_GNUC_UNUSED,
+  const gchar *signal_name,
+  GVariant *parameters)
+{
+  _ExtendedGDBusSignalInfo *info;
+  GVariantIter iter;
+  GVariant *child;
+  GValue *paramv;
+  guint num_params;
+  guint n;
+  guint signal_id;
+  info = (_ExtendedGDBusSignalInfo *) g_dbus_interface_info_lookup_signal ((GDBusInterfaceInfo *) &_control_interface_info.parent_struct, signal_name);
+  if (info == NULL)
+    return;
+  num_params = g_variant_n_children (parameters);
+  paramv = g_new0 (GValue, num_params + 1);
+  g_value_init (&paramv[0], TYPE_CONTROL);
+  g_value_set_object (&paramv[0], proxy);
+  g_variant_iter_init (&iter, parameters);
+  n = 1;
+  while ((child = g_variant_iter_next_value (&iter)) != NULL)
+    {
+      _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.args[n - 1];
+      if (arg_info->use_gvariant)
+        {
+          g_value_init (&paramv[n], G_TYPE_VARIANT);
+          g_value_set_variant (&paramv[n], child);
+          n++;
+        }
+      else
+        g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
+      g_variant_unref (child);
+    }
+  signal_id = g_signal_lookup (info->signal_name, TYPE_CONTROL);
+  g_signal_emitv (paramv, signal_id, 0, NULL);
+  for (n = 0; n < num_params + 1; n++)
+    g_value_unset (&paramv[n]);
+  g_free (paramv);
+}
+
+static void
+control_proxy_g_properties_changed (GDBusProxy *_proxy,
+  GVariant *changed_properties,
+  const gchar *const *invalidated_properties)
+{
+  ControlProxy *proxy = CONTROL_PROXY (_proxy);
+  guint n;
+  const gchar *key;
+  GVariantIter *iter;
+  _ExtendedGDBusPropertyInfo *info;
+  g_variant_get (changed_properties, "a{sv}", &iter);
+  while (g_variant_iter_next (iter, "{&sv}", &key, NULL))
+    {
+      info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_interface_info.parent_struct, key);
+      g_datalist_remove_data (&proxy->priv->qdata, key);
+      if (info != NULL)
+        g_object_notify (G_OBJECT (proxy), info->hyphen_name);
+    }
+  g_variant_iter_free (iter);
+  for (n = 0; invalidated_properties[n] != NULL; n++)
+    {
+      info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_interface_info.parent_struct, invalidated_properties[n]);
+      g_datalist_remove_data (&proxy->priv->qdata, invalidated_properties[n]);
+      if (info != NULL)
+        g_object_notify (G_OBJECT (proxy), info->hyphen_name);
+    }
+}
+
+static gint 
+control_proxy_get_poll_interval (Control *object)
+{
+  ControlProxy *proxy = CONTROL_PROXY (object);
+  GVariant *variant;
+  gint value = 0;
+  variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "poll_interval");
+  if (variant != NULL)
+    {
+      value = g_variant_get_int32 (variant);
+      g_variant_unref (variant);
+    }
+  return value;
+}
+
+static gint 
+control_proxy_get_heatbeat (Control *object)
+{
+  ControlProxy *proxy = CONTROL_PROXY (object);
+  GVariant *variant;
+  gint value = 0;
+  variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "heatbeat");
+  if (variant != NULL)
+    {
+      value = g_variant_get_int32 (variant);
+      g_variant_unref (variant);
+    }
+  return value;
+}
+
+static void
+control_proxy_init (ControlProxy *proxy)
+{
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+  proxy->priv = control_proxy_get_instance_private (proxy);
+#else
+  proxy->priv = G_TYPE_INSTANCE_GET_PRIVATE (proxy, TYPE_CONTROL_PROXY, ControlProxyPrivate);
+#endif
+
+  g_dbus_proxy_set_interface_info (G_DBUS_PROXY (proxy), control_interface_info ());
+}
+
+static void
+control_proxy_class_init (ControlProxyClass *klass)
+{
+  GObjectClass *gobject_class;
+  GDBusProxyClass *proxy_class;
+
+  gobject_class = G_OBJECT_CLASS (klass);
+  gobject_class->finalize     = control_proxy_finalize;
+  gobject_class->get_property = control_proxy_get_property;
+  gobject_class->set_property = control_proxy_set_property;
+
+  proxy_class = G_DBUS_PROXY_CLASS (klass);
+  proxy_class->g_signal = control_proxy_g_signal;
+  proxy_class->g_properties_changed = control_proxy_g_properties_changed;
+
+  control_override_properties (gobject_class, 1);
+
+#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
+  g_type_class_add_private (klass, sizeof (ControlProxyPrivate));
+#endif
+}
+
+static void
+control_proxy_iface_init (ControlIface *iface)
+{
+  iface->get_poll_interval = control_proxy_get_poll_interval;
+  iface->get_heatbeat = control_proxy_get_heatbeat;
+}
+
+/**
+ * control_proxy_new:
+ * @connection: A #GDBusConnection.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
+ * @user_data: User data to pass to @callback.
+ *
+ * Asynchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link>. See g_dbus_proxy_new() for more details.
+ *
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call control_proxy_new_finish() to get the result of the operation.
+ *
+ * See control_proxy_new_sync() for the synchronous, blocking version of this constructor.
+ */
+void
+control_proxy_new (
+    GDBusConnection     *connection,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GAsyncReadyCallback  callback,
+    gpointer             user_data)
+{
+  g_async_initable_new_async (TYPE_CONTROL_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.Control", NULL);
+}
+
+/**
+ * control_proxy_new_finish:
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_proxy_new().
+ * @error: Return location for error or %NULL
+ *
+ * Finishes an operation started with control_proxy_new().
+ *
+ * Returns: (transfer full) (type ControlProxy): The constructed proxy object or %NULL if @error is set.
+ */
+Control *
+control_proxy_new_finish (
+    GAsyncResult        *res,
+    GError             **error)
+{
+  GObject *ret;
+  GObject *source_object;
+  source_object = g_async_result_get_source_object (res);
+  ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
+  g_object_unref (source_object);
+  if (ret != NULL)
+    return CONTROL (ret);
+  else
+    return NULL;
+}
+
+/**
+ * control_proxy_new_sync:
+ * @connection: A #GDBusConnection.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL
+ *
+ * Synchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link>. See g_dbus_proxy_new_sync() for more details.
+ *
+ * The calling thread is blocked until a reply is received.
+ *
+ * See control_proxy_new() for the asynchronous version of this constructor.
+ *
+ * Returns: (transfer full) (type ControlProxy): The constructed proxy object or %NULL if @error is set.
+ */
+Control *
+control_proxy_new_sync (
+    GDBusConnection     *connection,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GError             **error)
+{
+  GInitable *ret;
+  ret = g_initable_new (TYPE_CONTROL_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.Control", NULL);
+  if (ret != NULL)
+    return CONTROL (ret);
+  else
+    return NULL;
+}
+
+
+/**
+ * control_proxy_new_for_bus:
+ * @bus_type: A #GBusType.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: A bus name (well-known or unique).
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
+ * @user_data: User data to pass to @callback.
+ *
+ * Like control_proxy_new() but takes a #GBusType instead of a #GDBusConnection.
+ *
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call control_proxy_new_for_bus_finish() to get the result of the operation.
+ *
+ * See control_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.
+ */
+void
+control_proxy_new_for_bus (
+    GBusType             bus_type,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GAsyncReadyCallback  callback,
+    gpointer             user_data)
+{
+  g_async_initable_new_async (TYPE_CONTROL_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.Control", NULL);
+}
+
+/**
+ * control_proxy_new_for_bus_finish:
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_proxy_new_for_bus().
+ * @error: Return location for error or %NULL
+ *
+ * Finishes an operation started with control_proxy_new_for_bus().
+ *
+ * Returns: (transfer full) (type ControlProxy): The constructed proxy object or %NULL if @error is set.
+ */
+Control *
+control_proxy_new_for_bus_finish (
+    GAsyncResult        *res,
+    GError             **error)
+{
+  GObject *ret;
+  GObject *source_object;
+  source_object = g_async_result_get_source_object (res);
+  ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
+  g_object_unref (source_object);
+  if (ret != NULL)
+    return CONTROL (ret);
+  else
+    return NULL;
+}
+
+/**
+ * control_proxy_new_for_bus_sync:
+ * @bus_type: A #GBusType.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: A bus name (well-known or unique).
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL
+ *
+ * Like control_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection.
+ *
+ * The calling thread is blocked until a reply is received.
+ *
+ * See control_proxy_new_for_bus() for the asynchronous version of this constructor.
+ *
+ * Returns: (transfer full) (type ControlProxy): The constructed proxy object or %NULL if @error is set.
+ */
+Control *
+control_proxy_new_for_bus_sync (
+    GBusType             bus_type,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GError             **error)
+{
+  GInitable *ret;
+  ret = g_initable_new (TYPE_CONTROL_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.Control", NULL);
+  if (ret != NULL)
+    return CONTROL (ret);
+  else
+    return NULL;
+}
+
+
+/* ------------------------------------------------------------------------ */
+
+/**
+ * ControlSkeleton:
+ *
+ * The #ControlSkeleton structure contains only private data and should only be accessed using the provided API.
+ */
+
+/**
+ * ControlSkeletonClass:
+ * @parent_class: The parent class.
+ *
+ * Class structure for #ControlSkeleton.
+ */
+
+struct _ControlSkeletonPrivate
+{
+  GValue *properties;
+  GList *changed_properties;
+  GSource *changed_properties_idle_source;
+  GMainContext *context;
+  GMutex lock;
+};
+
+static void
+_control_skeleton_handle_method_call (
+  GDBusConnection *connection G_GNUC_UNUSED,
+  const gchar *sender G_GNUC_UNUSED,
+  const gchar *object_path G_GNUC_UNUSED,
+  const gchar *interface_name,
+  const gchar *method_name,
+  GVariant *parameters,
+  GDBusMethodInvocation *invocation,
+  gpointer user_data)
+{
+  ControlSkeleton *skeleton = CONTROL_SKELETON (user_data);
+  _ExtendedGDBusMethodInfo *info;
+  GVariantIter iter;
+  GVariant *child;
+  GValue *paramv;
+  guint num_params;
+  guint num_extra;
+  guint n;
+  guint signal_id;
+  GValue return_value = G_VALUE_INIT;
+  info = (_ExtendedGDBusMethodInfo *) g_dbus_method_invocation_get_method_info (invocation);
+  g_assert (info != NULL);
+  num_params = g_variant_n_children (parameters);
+  num_extra = info->pass_fdlist ? 3 : 2;  paramv = g_new0 (GValue, num_params + num_extra);
+  n = 0;
+  g_value_init (&paramv[n], TYPE_CONTROL);
+  g_value_set_object (&paramv[n++], skeleton);
+  g_value_init (&paramv[n], G_TYPE_DBUS_METHOD_INVOCATION);
+  g_value_set_object (&paramv[n++], invocation);
+  if (info->pass_fdlist)
+    {
+#ifdef G_OS_UNIX
+      g_value_init (&paramv[n], G_TYPE_UNIX_FD_LIST);
+      g_value_set_object (&paramv[n++], g_dbus_message_get_unix_fd_list (g_dbus_method_invocation_get_message (invocation)));
+#else
+      g_assert_not_reached ();
+#endif
+    }
+  g_variant_iter_init (&iter, parameters);
+  while ((child = g_variant_iter_next_value (&iter)) != NULL)
+    {
+      _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.in_args[n - num_extra];
+      if (arg_info->use_gvariant)
+        {
+          g_value_init (&paramv[n], G_TYPE_VARIANT);
+          g_value_set_variant (&paramv[n], child);
+          n++;
+        }
+      else
+        g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
+      g_variant_unref (child);
+    }
+  signal_id = g_signal_lookup (info->signal_name, TYPE_CONTROL);
+  g_value_init (&return_value, G_TYPE_BOOLEAN);
+  g_signal_emitv (paramv, signal_id, 0, &return_value);
+  if (!g_value_get_boolean (&return_value))
+    g_dbus_method_invocation_return_error (invocation, G_DBUS_ERROR, G_DBUS_ERROR_UNKNOWN_METHOD, "Method %s is not implemented on interface %s", method_name, interface_name);
+  g_value_unset (&return_value);
+  for (n = 0; n < num_params + num_extra; n++)
+    g_value_unset (&paramv[n]);
+  g_free (paramv);
+}
+
+static GVariant *
+_control_skeleton_handle_get_property (
+  GDBusConnection *connection G_GNUC_UNUSED,
+  const gchar *sender G_GNUC_UNUSED,
+  const gchar *object_path G_GNUC_UNUSED,
+  const gchar *interface_name G_GNUC_UNUSED,
+  const gchar *property_name,
+  GError **error,
+  gpointer user_data)
+{
+  ControlSkeleton *skeleton = CONTROL_SKELETON (user_data);
+  GValue value = G_VALUE_INIT;
+  GParamSpec *pspec;
+  _ExtendedGDBusPropertyInfo *info;
+  GVariant *ret;
+  ret = NULL;
+  info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_interface_info.parent_struct, property_name);
+  g_assert (info != NULL);
+  pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
+  if (pspec == NULL)
+    {
+      g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
+    }
+  else
+    {
+      g_value_init (&value, pspec->value_type);
+      g_object_get_property (G_OBJECT (skeleton), info->hyphen_name, &value);
+      ret = g_dbus_gvalue_to_gvariant (&value, G_VARIANT_TYPE (info->parent_struct.signature));
+      g_value_unset (&value);
+    }
+  return ret;
+}
+
+static gboolean
+_control_skeleton_handle_set_property (
+  GDBusConnection *connection G_GNUC_UNUSED,
+  const gchar *sender G_GNUC_UNUSED,
+  const gchar *object_path G_GNUC_UNUSED,
+  const gchar *interface_name G_GNUC_UNUSED,
+  const gchar *property_name,
+  GVariant *variant,
+  GError **error,
+  gpointer user_data)
+{
+  ControlSkeleton *skeleton = CONTROL_SKELETON (user_data);
+  GValue value = G_VALUE_INIT;
+  GParamSpec *pspec;
+  _ExtendedGDBusPropertyInfo *info;
+  gboolean ret;
+  ret = FALSE;
+  info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_interface_info.parent_struct, property_name);
+  g_assert (info != NULL);
+  pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
+  if (pspec == NULL)
+    {
+      g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
+    }
+  else
+    {
+      if (info->use_gvariant)
+        g_value_set_variant (&value, variant);
+      else
+        g_dbus_gvariant_to_gvalue (variant, &value);
+      g_object_set_property (G_OBJECT (skeleton), info->hyphen_name, &value);
+      g_value_unset (&value);
+      ret = TRUE;
+    }
+  return ret;
+}
+
+static const GDBusInterfaceVTable _control_skeleton_vtable =
+{
+  _control_skeleton_handle_method_call,
+  _control_skeleton_handle_get_property,
+  _control_skeleton_handle_set_property,
+  {NULL}
+};
+
+static GDBusInterfaceInfo *
+control_skeleton_dbus_interface_get_info (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
+{
+  return control_interface_info ();
+}
+
+static GDBusInterfaceVTable *
+control_skeleton_dbus_interface_get_vtable (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
+{
+  return (GDBusInterfaceVTable *) &_control_skeleton_vtable;
+}
+
+static GVariant *
+control_skeleton_dbus_interface_get_properties (GDBusInterfaceSkeleton *_skeleton)
+{
+  ControlSkeleton *skeleton = CONTROL_SKELETON (_skeleton);
+
+  GVariantBuilder builder;
+  guint n;
+  g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}"));
+  if (_control_interface_info.parent_struct.properties == NULL)
+    goto out;
+  for (n = 0; _control_interface_info.parent_struct.properties[n] != NULL; n++)
+    {
+      GDBusPropertyInfo *info = _control_interface_info.parent_struct.properties[n];
+      if (info->flags & G_DBUS_PROPERTY_INFO_FLAGS_READABLE)
+        {
+          GVariant *value;
+          value = _control_skeleton_handle_get_property (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)), NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.Control", info->name, NULL, skeleton);
+          if (value != NULL)
+            {
+              g_variant_take_ref (value);
+              g_variant_builder_add (&builder, "{sv}", info->name, value);
+              g_variant_unref (value);
+            }
+        }
+    }
+out:
+  return g_variant_builder_end (&builder);
+}
+
+static gboolean _control_emit_changed (gpointer user_data);
+
+static void
+control_skeleton_dbus_interface_flush (GDBusInterfaceSkeleton *_skeleton)
+{
+  ControlSkeleton *skeleton = CONTROL_SKELETON (_skeleton);
+  gboolean emit_changed = FALSE;
+
+  g_mutex_lock (&skeleton->priv->lock);
+  if (skeleton->priv->changed_properties_idle_source != NULL)
+    {
+      g_source_destroy (skeleton->priv->changed_properties_idle_source);
+      skeleton->priv->changed_properties_idle_source = NULL;
+      emit_changed = TRUE;
+    }
+  g_mutex_unlock (&skeleton->priv->lock);
+
+  if (emit_changed)
+    _control_emit_changed (skeleton);
+}
+
+static void
+_control_on_signal_heartbeat (
+    Control *object,
+    const gchar *arg_bus_name)
+{
+  ControlSkeleton *skeleton = CONTROL_SKELETON (object);
+
+  GList      *connections, *l;
+  GVariant   *signal_variant;
+  connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton));
+
+  signal_variant = g_variant_ref_sink (g_variant_new ("(s)",
+                   arg_bus_name));
+  for (l = connections; l != NULL; l = l->next)
+    {
+      GDBusConnection *connection = l->data;
+      g_dbus_connection_emit_signal (connection,
+        NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.Control", "Heartbeat",
+        signal_variant, NULL);
+    }
+  g_variant_unref (signal_variant);
+  g_list_free_full (connections, g_object_unref);
+}
+
+static void control_skeleton_iface_init (ControlIface *iface);
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+G_DEFINE_TYPE_WITH_CODE (ControlSkeleton, control_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
+                         G_ADD_PRIVATE (ControlSkeleton)
+                         G_IMPLEMENT_INTERFACE (TYPE_CONTROL, control_skeleton_iface_init));
+
+#else
+G_DEFINE_TYPE_WITH_CODE (ControlSkeleton, control_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
+                         G_IMPLEMENT_INTERFACE (TYPE_CONTROL, control_skeleton_iface_init));
+
+#endif
+static void
+control_skeleton_finalize (GObject *object)
+{
+  ControlSkeleton *skeleton = CONTROL_SKELETON (object);
+  guint n;
+  for (n = 0; n < 2; n++)
+    g_value_unset (&skeleton->priv->properties[n]);
+  g_free (skeleton->priv->properties);
+  g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free);
+  if (skeleton->priv->changed_properties_idle_source != NULL)
+    g_source_destroy (skeleton->priv->changed_properties_idle_source);
+  g_main_context_unref (skeleton->priv->context);
+  g_mutex_clear (&skeleton->priv->lock);
+  G_OBJECT_CLASS (control_skeleton_parent_class)->finalize (object);
+}
+
+static void
+control_skeleton_get_property (GObject      *object,
+  guint         prop_id,
+  GValue       *value,
+  GParamSpec   *pspec G_GNUC_UNUSED)
+{
+  ControlSkeleton *skeleton = CONTROL_SKELETON (object);
+  g_assert (prop_id != 0 && prop_id - 1 < 2);
+  g_mutex_lock (&skeleton->priv->lock);
+  g_value_copy (&skeleton->priv->properties[prop_id - 1], value);
+  g_mutex_unlock (&skeleton->priv->lock);
+}
+
+static gboolean
+_control_emit_changed (gpointer user_data)
+{
+  ControlSkeleton *skeleton = CONTROL_SKELETON (user_data);
+  GList *l;
+  GVariantBuilder builder;
+  GVariantBuilder invalidated_builder;
+  guint num_changes;
+
+  g_mutex_lock (&skeleton->priv->lock);
+  g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}"));
+  g_variant_builder_init (&invalidated_builder, G_VARIANT_TYPE ("as"));
+  for (l = skeleton->priv->changed_properties, num_changes = 0; l != NULL; l = l->next)
+    {
+      ChangedProperty *cp = l->data;
+      GVariant *variant;
+      const GValue *cur_value;
+
+      cur_value = &skeleton->priv->properties[cp->prop_id - 1];
+      if (!_g_value_equal (cur_value, &cp->orig_value))
+        {
+          variant = g_dbus_gvalue_to_gvariant (cur_value, G_VARIANT_TYPE (cp->info->parent_struct.signature));
+          g_variant_builder_add (&builder, "{sv}", cp->info->parent_struct.name, variant);
+          g_variant_unref (variant);
+          num_changes++;
+        }
+    }
+  if (num_changes > 0)
+    {
+      GList *connections, *ll;
+      GVariant *signal_variant;
+      signal_variant = g_variant_ref_sink (g_variant_new ("(sa{sv}as)", "org.openbmc.Control",
+                                           &builder, &invalidated_builder));
+      connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton));
+      for (ll = connections; ll != NULL; ll = ll->next)
+        {
+          GDBusConnection *connection = ll->data;
+
+          g_dbus_connection_emit_signal (connection,
+                                         NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)),
+                                         "org.freedesktop.DBus.Properties",
+                                         "PropertiesChanged",
+                                         signal_variant,
+                                         NULL);
+        }
+      g_variant_unref (signal_variant);
+      g_list_free_full (connections, g_object_unref);
+    }
+  else
+    {
+      g_variant_builder_clear (&builder);
+      g_variant_builder_clear (&invalidated_builder);
+    }
+  g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free);
+  skeleton->priv->changed_properties = NULL;
+  skeleton->priv->changed_properties_idle_source = NULL;
+  g_mutex_unlock (&skeleton->priv->lock);
+  return FALSE;
+}
+
+static void
+_control_schedule_emit_changed (ControlSkeleton *skeleton, const _ExtendedGDBusPropertyInfo *info, guint prop_id, const GValue *orig_value)
+{
+  ChangedProperty *cp;
+  GList *l;
+  cp = NULL;
+  for (l = skeleton->priv->changed_properties; l != NULL; l = l->next)
+    {
+      ChangedProperty *i_cp = l->data;
+      if (i_cp->info == info)
+        {
+          cp = i_cp;
+          break;
+        }
+    }
+  if (cp == NULL)
+    {
+      cp = g_new0 (ChangedProperty, 1);
+      cp->prop_id = prop_id;
+      cp->info = info;
+      skeleton->priv->changed_properties = g_list_prepend (skeleton->priv->changed_properties, cp);
+      g_value_init (&cp->orig_value, G_VALUE_TYPE (orig_value));
+      g_value_copy (orig_value, &cp->orig_value);
+    }
+}
+
+static void
+control_skeleton_notify (GObject      *object,
+  GParamSpec *pspec G_GNUC_UNUSED)
+{
+  ControlSkeleton *skeleton = CONTROL_SKELETON (object);
+  g_mutex_lock (&skeleton->priv->lock);
+  if (skeleton->priv->changed_properties != NULL &&
+      skeleton->priv->changed_properties_idle_source == NULL)
+    {
+      skeleton->priv->changed_properties_idle_source = g_idle_source_new ();
+      g_source_set_priority (skeleton->priv->changed_properties_idle_source, G_PRIORITY_DEFAULT);
+      g_source_set_callback (skeleton->priv->changed_properties_idle_source, _control_emit_changed, g_object_ref (skeleton), (GDestroyNotify) g_object_unref);
+      g_source_attach (skeleton->priv->changed_properties_idle_source, skeleton->priv->context);
+      g_source_unref (skeleton->priv->changed_properties_idle_source);
+    }
+  g_mutex_unlock (&skeleton->priv->lock);
+}
+
+static void
+control_skeleton_set_property (GObject      *object,
+  guint         prop_id,
+  const GValue *value,
+  GParamSpec   *pspec)
+{
+  ControlSkeleton *skeleton = CONTROL_SKELETON (object);
+  g_assert (prop_id != 0 && prop_id - 1 < 2);
+  g_mutex_lock (&skeleton->priv->lock);
+  g_object_freeze_notify (object);
+  if (!_g_value_equal (value, &skeleton->priv->properties[prop_id - 1]))
+    {
+      if (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)) != NULL)
+        _control_schedule_emit_changed (skeleton, _control_property_info_pointers[prop_id - 1], prop_id, &skeleton->priv->properties[prop_id - 1]);
+      g_value_copy (value, &skeleton->priv->properties[prop_id - 1]);
+      g_object_notify_by_pspec (object, pspec);
+    }
+  g_mutex_unlock (&skeleton->priv->lock);
+  g_object_thaw_notify (object);
+}
+
+static void
+control_skeleton_init (ControlSkeleton *skeleton)
+{
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+  skeleton->priv = control_skeleton_get_instance_private (skeleton);
+#else
+  skeleton->priv = G_TYPE_INSTANCE_GET_PRIVATE (skeleton, TYPE_CONTROL_SKELETON, ControlSkeletonPrivate);
+#endif
+
+  g_mutex_init (&skeleton->priv->lock);
+  skeleton->priv->context = g_main_context_ref_thread_default ();
+  skeleton->priv->properties = g_new0 (GValue, 2);
+  g_value_init (&skeleton->priv->properties[0], G_TYPE_INT);
+  g_value_init (&skeleton->priv->properties[1], G_TYPE_INT);
+}
+
+static gint 
+control_skeleton_get_poll_interval (Control *object)
+{
+  ControlSkeleton *skeleton = CONTROL_SKELETON (object);
+  gint value;
+  g_mutex_lock (&skeleton->priv->lock);
+  value = g_value_get_int (&(skeleton->priv->properties[0]));
+  g_mutex_unlock (&skeleton->priv->lock);
+  return value;
+}
+
+static gint 
+control_skeleton_get_heatbeat (Control *object)
+{
+  ControlSkeleton *skeleton = CONTROL_SKELETON (object);
+  gint value;
+  g_mutex_lock (&skeleton->priv->lock);
+  value = g_value_get_int (&(skeleton->priv->properties[1]));
+  g_mutex_unlock (&skeleton->priv->lock);
+  return value;
+}
+
+static void
+control_skeleton_class_init (ControlSkeletonClass *klass)
+{
+  GObjectClass *gobject_class;
+  GDBusInterfaceSkeletonClass *skeleton_class;
+
+  gobject_class = G_OBJECT_CLASS (klass);
+  gobject_class->finalize = control_skeleton_finalize;
+  gobject_class->get_property = control_skeleton_get_property;
+  gobject_class->set_property = control_skeleton_set_property;
+  gobject_class->notify       = control_skeleton_notify;
+
+
+  control_override_properties (gobject_class, 1);
+
+  skeleton_class = G_DBUS_INTERFACE_SKELETON_CLASS (klass);
+  skeleton_class->get_info = control_skeleton_dbus_interface_get_info;
+  skeleton_class->get_properties = control_skeleton_dbus_interface_get_properties;
+  skeleton_class->flush = control_skeleton_dbus_interface_flush;
+  skeleton_class->get_vtable = control_skeleton_dbus_interface_get_vtable;
+
+#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
+  g_type_class_add_private (klass, sizeof (ControlSkeletonPrivate));
+#endif
+}
+
+static void
+control_skeleton_iface_init (ControlIface *iface)
+{
+  iface->heartbeat = _control_on_signal_heartbeat;
+  iface->get_poll_interval = control_skeleton_get_poll_interval;
+  iface->get_heatbeat = control_skeleton_get_heatbeat;
+}
+
+/**
+ * control_skeleton_new:
+ *
+ * Creates a skeleton object for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link>.
+ *
+ * Returns: (transfer full) (type ControlSkeleton): The skeleton object.
+ */
+Control *
+control_skeleton_new (void)
+{
+  return CONTROL (g_object_new (TYPE_CONTROL_SKELETON, NULL));
+}
+
+/* ------------------------------------------------------------------------
+ * Code for interface org.openbmc.control.Host
+ * ------------------------------------------------------------------------
+ */
+
+/**
+ * SECTION:ControlHost
+ * @title: ControlHost
+ * @short_description: Generated C code for the org.openbmc.control.Host D-Bus interface
+ *
+ * This section contains code for working with the <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link> D-Bus interface in C.
+ */
+
+/* ---- Introspection data for org.openbmc.control.Host ---- */
+
+static const _ExtendedGDBusMethodInfo _control_host_method_info_boot =
+{
+  {
+    -1,
+    (gchar *) "boot",
+    NULL,
+    NULL,
+    NULL
+  },
+  "handle-boot",
+  FALSE
+};
+
+static const _ExtendedGDBusMethodInfo _control_host_method_info_shutdown =
+{
+  {
+    -1,
+    (gchar *) "shutdown",
+    NULL,
+    NULL,
+    NULL
+  },
+  "handle-shutdown",
+  FALSE
+};
+
+static const _ExtendedGDBusMethodInfo _control_host_method_info_reboot =
+{
+  {
+    -1,
+    (gchar *) "reboot",
+    NULL,
+    NULL,
+    NULL
+  },
+  "handle-reboot",
+  FALSE
+};
+
+static const _ExtendedGDBusMethodInfo * const _control_host_method_info_pointers[] =
+{
+  &_control_host_method_info_boot,
+  &_control_host_method_info_shutdown,
+  &_control_host_method_info_reboot,
+  NULL
+};
+
+static const _ExtendedGDBusSignalInfo _control_host_signal_info_booted =
+{
+  {
+    -1,
+    (gchar *) "Booted",
+    NULL,
+    NULL
+  },
+  "booted"
+};
+
+static const _ExtendedGDBusSignalInfo * const _control_host_signal_info_pointers[] =
+{
+  &_control_host_signal_info_booted,
+  NULL
+};
+
+static const _ExtendedGDBusInterfaceInfo _control_host_interface_info =
+{
+  {
+    -1,
+    (gchar *) "org.openbmc.control.Host",
+    (GDBusMethodInfo **) &_control_host_method_info_pointers,
+    (GDBusSignalInfo **) &_control_host_signal_info_pointers,
+    NULL,
+    NULL
+  },
+  "control-host",
+};
+
+
+/**
+ * control_host_interface_info:
+ *
+ * Gets a machine-readable description of the <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link> D-Bus interface.
+ *
+ * Returns: (transfer none): A #GDBusInterfaceInfo. Do not free.
+ */
+GDBusInterfaceInfo *
+control_host_interface_info (void)
+{
+  return (GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct;
+}
+
+/**
+ * control_host_override_properties:
+ * @klass: The class structure for a #GObject<!-- -->-derived class.
+ * @property_id_begin: The property id to assign to the first overridden property.
+ *
+ * Overrides all #GObject properties in the #ControlHost interface for a concrete class.
+ * The properties are overridden in the order they are defined.
+ *
+ * Returns: The last property id.
+ */
+guint
+control_host_override_properties (GObjectClass *klass, guint property_id_begin)
+{
+  return property_id_begin - 1;
+}
+
+
+
+/**
+ * ControlHost:
+ *
+ * Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>.
+ */
+
+/**
+ * ControlHostIface:
+ * @parent_iface: The parent interface.
+ * @handle_boot: Handler for the #ControlHost::handle-boot signal.
+ * @handle_reboot: Handler for the #ControlHost::handle-reboot signal.
+ * @handle_shutdown: Handler for the #ControlHost::handle-shutdown signal.
+ * @booted: Handler for the #ControlHost::booted signal.
+ *
+ * Virtual table for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>.
+ */
+
+typedef ControlHostIface ControlHostInterface;
+G_DEFINE_INTERFACE (ControlHost, control_host, G_TYPE_OBJECT);
+
+static void
+control_host_default_init (ControlHostIface *iface)
+{
+  /* GObject signals for incoming D-Bus method calls: */
+  /**
+   * ControlHost::handle-boot:
+   * @object: A #ControlHost.
+   * @invocation: A #GDBusMethodInvocation.
+   *
+   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-control-Host.boot">boot()</link> D-Bus method.
+   *
+   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call control_host_complete_boot() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
+   *
+   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
+   */
+  g_signal_new ("handle-boot",
+    G_TYPE_FROM_INTERFACE (iface),
+    G_SIGNAL_RUN_LAST,
+    G_STRUCT_OFFSET (ControlHostIface, handle_boot),
+    g_signal_accumulator_true_handled,
+    NULL,
+    g_cclosure_marshal_generic,
+    G_TYPE_BOOLEAN,
+    1,
+    G_TYPE_DBUS_METHOD_INVOCATION);
+
+  /**
+   * ControlHost::handle-shutdown:
+   * @object: A #ControlHost.
+   * @invocation: A #GDBusMethodInvocation.
+   *
+   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-control-Host.shutdown">shutdown()</link> D-Bus method.
+   *
+   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call control_host_complete_shutdown() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
+   *
+   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
+   */
+  g_signal_new ("handle-shutdown",
+    G_TYPE_FROM_INTERFACE (iface),
+    G_SIGNAL_RUN_LAST,
+    G_STRUCT_OFFSET (ControlHostIface, handle_shutdown),
+    g_signal_accumulator_true_handled,
+    NULL,
+    g_cclosure_marshal_generic,
+    G_TYPE_BOOLEAN,
+    1,
+    G_TYPE_DBUS_METHOD_INVOCATION);
+
+  /**
+   * ControlHost::handle-reboot:
+   * @object: A #ControlHost.
+   * @invocation: A #GDBusMethodInvocation.
+   *
+   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-control-Host.reboot">reboot()</link> D-Bus method.
+   *
+   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call control_host_complete_reboot() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
+   *
+   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
+   */
+  g_signal_new ("handle-reboot",
+    G_TYPE_FROM_INTERFACE (iface),
+    G_SIGNAL_RUN_LAST,
+    G_STRUCT_OFFSET (ControlHostIface, handle_reboot),
+    g_signal_accumulator_true_handled,
+    NULL,
+    g_cclosure_marshal_generic,
+    G_TYPE_BOOLEAN,
+    1,
+    G_TYPE_DBUS_METHOD_INVOCATION);
+
+  /* GObject signals for received D-Bus signals: */
+  /**
+   * ControlHost::booted:
+   * @object: A #ControlHost.
+   *
+   * On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-control-Host.Booted">"Booted"</link> is received.
+   *
+   * On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.
+   */
+  g_signal_new ("booted",
+    G_TYPE_FROM_INTERFACE (iface),
+    G_SIGNAL_RUN_LAST,
+    G_STRUCT_OFFSET (ControlHostIface, booted),
+    NULL,
+    NULL,
+    g_cclosure_marshal_generic,
+    G_TYPE_NONE,
+    0);
+
+}
+
+/**
+ * control_host_emit_booted:
+ * @object: A #ControlHost.
+ *
+ * Emits the <link linkend="gdbus-signal-org-openbmc-control-Host.Booted">"Booted"</link> D-Bus signal.
+ */
+void
+control_host_emit_booted (
+    ControlHost *object)
+{
+  g_signal_emit_by_name (object, "booted");
+}
+
+/**
+ * control_host_call_boot:
+ * @proxy: A #ControlHostProxy.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
+ * @user_data: User data to pass to @callback.
+ *
+ * Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.boot">boot()</link> D-Bus method on @proxy.
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call control_host_call_boot_finish() to get the result of the operation.
+ *
+ * See control_host_call_boot_sync() for the synchronous, blocking version of this method.
+ */
+void
+control_host_call_boot (
+    ControlHost *proxy,
+    GCancellable *cancellable,
+    GAsyncReadyCallback callback,
+    gpointer user_data)
+{
+  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
+    "boot",
+    g_variant_new ("()"),
+    G_DBUS_CALL_FLAGS_NONE,
+    -1,
+    cancellable,
+    callback,
+    user_data);
+}
+
+/**
+ * control_host_call_boot_finish:
+ * @proxy: A #ControlHostProxy.
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_host_call_boot().
+ * @error: Return location for error or %NULL.
+ *
+ * Finishes an operation started with control_host_call_boot().
+ *
+ * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ */
+gboolean
+control_host_call_boot_finish (
+    ControlHost *proxy,
+    GAsyncResult *res,
+    GError **error)
+{
+  GVariant *_ret;
+  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
+  if (_ret == NULL)
+    goto _out;
+  g_variant_get (_ret,
+                 "()");
+  g_variant_unref (_ret);
+_out:
+  return _ret != NULL;
+}
+
+/**
+ * control_host_call_boot_sync:
+ * @proxy: A #ControlHostProxy.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL.
+ *
+ * Synchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.boot">boot()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
+ *
+ * See control_host_call_boot() for the asynchronous version of this method.
+ *
+ * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ */
+gboolean
+control_host_call_boot_sync (
+    ControlHost *proxy,
+    GCancellable *cancellable,
+    GError **error)
+{
+  GVariant *_ret;
+  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
+    "boot",
+    g_variant_new ("()"),
+    G_DBUS_CALL_FLAGS_NONE,
+    -1,
+    cancellable,
+    error);
+  if (_ret == NULL)
+    goto _out;
+  g_variant_get (_ret,
+                 "()");
+  g_variant_unref (_ret);
+_out:
+  return _ret != NULL;
+}
+
+/**
+ * control_host_call_shutdown:
+ * @proxy: A #ControlHostProxy.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
+ * @user_data: User data to pass to @callback.
+ *
+ * Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.shutdown">shutdown()</link> D-Bus method on @proxy.
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call control_host_call_shutdown_finish() to get the result of the operation.
+ *
+ * See control_host_call_shutdown_sync() for the synchronous, blocking version of this method.
+ */
+void
+control_host_call_shutdown (
+    ControlHost *proxy,
+    GCancellable *cancellable,
+    GAsyncReadyCallback callback,
+    gpointer user_data)
+{
+  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
+    "shutdown",
+    g_variant_new ("()"),
+    G_DBUS_CALL_FLAGS_NONE,
+    -1,
+    cancellable,
+    callback,
+    user_data);
+}
+
+/**
+ * control_host_call_shutdown_finish:
+ * @proxy: A #ControlHostProxy.
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_host_call_shutdown().
+ * @error: Return location for error or %NULL.
+ *
+ * Finishes an operation started with control_host_call_shutdown().
+ *
+ * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ */
+gboolean
+control_host_call_shutdown_finish (
+    ControlHost *proxy,
+    GAsyncResult *res,
+    GError **error)
+{
+  GVariant *_ret;
+  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
+  if (_ret == NULL)
+    goto _out;
+  g_variant_get (_ret,
+                 "()");
+  g_variant_unref (_ret);
+_out:
+  return _ret != NULL;
+}
+
+/**
+ * control_host_call_shutdown_sync:
+ * @proxy: A #ControlHostProxy.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL.
+ *
+ * Synchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.shutdown">shutdown()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
+ *
+ * See control_host_call_shutdown() for the asynchronous version of this method.
+ *
+ * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ */
+gboolean
+control_host_call_shutdown_sync (
+    ControlHost *proxy,
+    GCancellable *cancellable,
+    GError **error)
+{
+  GVariant *_ret;
+  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
+    "shutdown",
+    g_variant_new ("()"),
+    G_DBUS_CALL_FLAGS_NONE,
+    -1,
+    cancellable,
+    error);
+  if (_ret == NULL)
+    goto _out;
+  g_variant_get (_ret,
+                 "()");
+  g_variant_unref (_ret);
+_out:
+  return _ret != NULL;
+}
+
+/**
+ * control_host_call_reboot:
+ * @proxy: A #ControlHostProxy.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
+ * @user_data: User data to pass to @callback.
+ *
+ * Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.reboot">reboot()</link> D-Bus method on @proxy.
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call control_host_call_reboot_finish() to get the result of the operation.
+ *
+ * See control_host_call_reboot_sync() for the synchronous, blocking version of this method.
+ */
+void
+control_host_call_reboot (
+    ControlHost *proxy,
+    GCancellable *cancellable,
+    GAsyncReadyCallback callback,
+    gpointer user_data)
+{
+  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
+    "reboot",
+    g_variant_new ("()"),
+    G_DBUS_CALL_FLAGS_NONE,
+    -1,
+    cancellable,
+    callback,
+    user_data);
+}
+
+/**
+ * control_host_call_reboot_finish:
+ * @proxy: A #ControlHostProxy.
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_host_call_reboot().
+ * @error: Return location for error or %NULL.
+ *
+ * Finishes an operation started with control_host_call_reboot().
+ *
+ * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ */
+gboolean
+control_host_call_reboot_finish (
+    ControlHost *proxy,
+    GAsyncResult *res,
+    GError **error)
+{
+  GVariant *_ret;
+  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
+  if (_ret == NULL)
+    goto _out;
+  g_variant_get (_ret,
+                 "()");
+  g_variant_unref (_ret);
+_out:
+  return _ret != NULL;
+}
+
+/**
+ * control_host_call_reboot_sync:
+ * @proxy: A #ControlHostProxy.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL.
+ *
+ * Synchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.reboot">reboot()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
+ *
+ * See control_host_call_reboot() for the asynchronous version of this method.
+ *
+ * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ */
+gboolean
+control_host_call_reboot_sync (
+    ControlHost *proxy,
+    GCancellable *cancellable,
+    GError **error)
+{
+  GVariant *_ret;
+  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
+    "reboot",
+    g_variant_new ("()"),
+    G_DBUS_CALL_FLAGS_NONE,
+    -1,
+    cancellable,
+    error);
+  if (_ret == NULL)
+    goto _out;
+  g_variant_get (_ret,
+                 "()");
+  g_variant_unref (_ret);
+_out:
+  return _ret != NULL;
+}
+
+/**
+ * control_host_complete_boot:
+ * @object: A #ControlHost.
+ * @invocation: (transfer full): A #GDBusMethodInvocation.
+ *
+ * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-control-Host.boot">boot()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
+ *
+ * This method will free @invocation, you cannot use it afterwards.
+ */
+void
+control_host_complete_boot (
+    ControlHost *object,
+    GDBusMethodInvocation *invocation)
+{
+  g_dbus_method_invocation_return_value (invocation,
+    g_variant_new ("()"));
+}
+
+/**
+ * control_host_complete_shutdown:
+ * @object: A #ControlHost.
+ * @invocation: (transfer full): A #GDBusMethodInvocation.
+ *
+ * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-control-Host.shutdown">shutdown()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
+ *
+ * This method will free @invocation, you cannot use it afterwards.
+ */
+void
+control_host_complete_shutdown (
+    ControlHost *object,
+    GDBusMethodInvocation *invocation)
+{
+  g_dbus_method_invocation_return_value (invocation,
+    g_variant_new ("()"));
+}
+
+/**
+ * control_host_complete_reboot:
+ * @object: A #ControlHost.
+ * @invocation: (transfer full): A #GDBusMethodInvocation.
+ *
+ * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-control-Host.reboot">reboot()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
+ *
+ * This method will free @invocation, you cannot use it afterwards.
+ */
+void
+control_host_complete_reboot (
+    ControlHost *object,
+    GDBusMethodInvocation *invocation)
+{
+  g_dbus_method_invocation_return_value (invocation,
+    g_variant_new ("()"));
+}
+
+/* ------------------------------------------------------------------------ */
+
+/**
+ * ControlHostProxy:
+ *
+ * The #ControlHostProxy structure contains only private data and should only be accessed using the provided API.
+ */
+
+/**
+ * ControlHostProxyClass:
+ * @parent_class: The parent class.
+ *
+ * Class structure for #ControlHostProxy.
+ */
+
+struct _ControlHostProxyPrivate
+{
+  GData *qdata;
+};
+
+static void control_host_proxy_iface_init (ControlHostIface *iface);
+
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+G_DEFINE_TYPE_WITH_CODE (ControlHostProxy, control_host_proxy, G_TYPE_DBUS_PROXY,
+                         G_ADD_PRIVATE (ControlHostProxy)
+                         G_IMPLEMENT_INTERFACE (TYPE_CONTROL_HOST, control_host_proxy_iface_init));
+
+#else
+G_DEFINE_TYPE_WITH_CODE (ControlHostProxy, control_host_proxy, G_TYPE_DBUS_PROXY,
+                         G_IMPLEMENT_INTERFACE (TYPE_CONTROL_HOST, control_host_proxy_iface_init));
+
+#endif
+static void
+control_host_proxy_finalize (GObject *object)
+{
+  ControlHostProxy *proxy = CONTROL_HOST_PROXY (object);
+  g_datalist_clear (&proxy->priv->qdata);
+  G_OBJECT_CLASS (control_host_proxy_parent_class)->finalize (object);
+}
+
+static void
+control_host_proxy_get_property (GObject      *object,
+  guint         prop_id,
+  GValue       *value,
+  GParamSpec   *pspec G_GNUC_UNUSED)
+{
+}
+
+static void
+control_host_proxy_set_property (GObject      *object,
+  guint         prop_id,
+  const GValue *value,
+  GParamSpec   *pspec G_GNUC_UNUSED)
+{
+}
+
+static void
+control_host_proxy_g_signal (GDBusProxy *proxy,
+  const gchar *sender_name G_GNUC_UNUSED,
+  const gchar *signal_name,
+  GVariant *parameters)
+{
+  _ExtendedGDBusSignalInfo *info;
+  GVariantIter iter;
+  GVariant *child;
+  GValue *paramv;
+  guint num_params;
+  guint n;
+  guint signal_id;
+  info = (_ExtendedGDBusSignalInfo *) g_dbus_interface_info_lookup_signal ((GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct, signal_name);
+  if (info == NULL)
+    return;
+  num_params = g_variant_n_children (parameters);
+  paramv = g_new0 (GValue, num_params + 1);
+  g_value_init (&paramv[0], TYPE_CONTROL_HOST);
+  g_value_set_object (&paramv[0], proxy);
+  g_variant_iter_init (&iter, parameters);
+  n = 1;
+  while ((child = g_variant_iter_next_value (&iter)) != NULL)
+    {
+      _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.args[n - 1];
+      if (arg_info->use_gvariant)
+        {
+          g_value_init (&paramv[n], G_TYPE_VARIANT);
+          g_value_set_variant (&paramv[n], child);
+          n++;
+        }
+      else
+        g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
+      g_variant_unref (child);
+    }
+  signal_id = g_signal_lookup (info->signal_name, TYPE_CONTROL_HOST);
+  g_signal_emitv (paramv, signal_id, 0, NULL);
+  for (n = 0; n < num_params + 1; n++)
+    g_value_unset (&paramv[n]);
+  g_free (paramv);
+}
+
+static void
+control_host_proxy_g_properties_changed (GDBusProxy *_proxy,
+  GVariant *changed_properties,
+  const gchar *const *invalidated_properties)
+{
+  ControlHostProxy *proxy = CONTROL_HOST_PROXY (_proxy);
+  guint n;
+  const gchar *key;
+  GVariantIter *iter;
+  _ExtendedGDBusPropertyInfo *info;
+  g_variant_get (changed_properties, "a{sv}", &iter);
+  while (g_variant_iter_next (iter, "{&sv}", &key, NULL))
+    {
+      info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct, key);
+      g_datalist_remove_data (&proxy->priv->qdata, key);
+      if (info != NULL)
+        g_object_notify (G_OBJECT (proxy), info->hyphen_name);
+    }
+  g_variant_iter_free (iter);
+  for (n = 0; invalidated_properties[n] != NULL; n++)
+    {
+      info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct, invalidated_properties[n]);
+      g_datalist_remove_data (&proxy->priv->qdata, invalidated_properties[n]);
+      if (info != NULL)
+        g_object_notify (G_OBJECT (proxy), info->hyphen_name);
+    }
+}
+
+static void
+control_host_proxy_init (ControlHostProxy *proxy)
+{
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+  proxy->priv = control_host_proxy_get_instance_private (proxy);
+#else
+  proxy->priv = G_TYPE_INSTANCE_GET_PRIVATE (proxy, TYPE_CONTROL_HOST_PROXY, ControlHostProxyPrivate);
+#endif
+
+  g_dbus_proxy_set_interface_info (G_DBUS_PROXY (proxy), control_host_interface_info ());
+}
+
+static void
+control_host_proxy_class_init (ControlHostProxyClass *klass)
+{
+  GObjectClass *gobject_class;
+  GDBusProxyClass *proxy_class;
+
+  gobject_class = G_OBJECT_CLASS (klass);
+  gobject_class->finalize     = control_host_proxy_finalize;
+  gobject_class->get_property = control_host_proxy_get_property;
+  gobject_class->set_property = control_host_proxy_set_property;
+
+  proxy_class = G_DBUS_PROXY_CLASS (klass);
+  proxy_class->g_signal = control_host_proxy_g_signal;
+  proxy_class->g_properties_changed = control_host_proxy_g_properties_changed;
+
+#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
+  g_type_class_add_private (klass, sizeof (ControlHostProxyPrivate));
+#endif
+}
+
+static void
+control_host_proxy_iface_init (ControlHostIface *iface)
+{
+}
+
+/**
+ * control_host_proxy_new:
+ * @connection: A #GDBusConnection.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
+ * @user_data: User data to pass to @callback.
+ *
+ * Asynchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>. See g_dbus_proxy_new() for more details.
+ *
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call control_host_proxy_new_finish() to get the result of the operation.
+ *
+ * See control_host_proxy_new_sync() for the synchronous, blocking version of this constructor.
+ */
+void
+control_host_proxy_new (
+    GDBusConnection     *connection,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GAsyncReadyCallback  callback,
+    gpointer             user_data)
+{
+  g_async_initable_new_async (TYPE_CONTROL_HOST_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Host", NULL);
+}
+
+/**
+ * control_host_proxy_new_finish:
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_host_proxy_new().
+ * @error: Return location for error or %NULL
+ *
+ * Finishes an operation started with control_host_proxy_new().
+ *
+ * Returns: (transfer full) (type ControlHostProxy): The constructed proxy object or %NULL if @error is set.
+ */
+ControlHost *
+control_host_proxy_new_finish (
+    GAsyncResult        *res,
+    GError             **error)
+{
+  GObject *ret;
+  GObject *source_object;
+  source_object = g_async_result_get_source_object (res);
+  ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
+  g_object_unref (source_object);
+  if (ret != NULL)
+    return CONTROL_HOST (ret);
+  else
+    return NULL;
+}
+
+/**
+ * control_host_proxy_new_sync:
+ * @connection: A #GDBusConnection.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL
+ *
+ * Synchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>. See g_dbus_proxy_new_sync() for more details.
+ *
+ * The calling thread is blocked until a reply is received.
+ *
+ * See control_host_proxy_new() for the asynchronous version of this constructor.
+ *
+ * Returns: (transfer full) (type ControlHostProxy): The constructed proxy object or %NULL if @error is set.
+ */
+ControlHost *
+control_host_proxy_new_sync (
+    GDBusConnection     *connection,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GError             **error)
+{
+  GInitable *ret;
+  ret = g_initable_new (TYPE_CONTROL_HOST_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Host", NULL);
+  if (ret != NULL)
+    return CONTROL_HOST (ret);
+  else
+    return NULL;
+}
+
+
+/**
+ * control_host_proxy_new_for_bus:
+ * @bus_type: A #GBusType.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: A bus name (well-known or unique).
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
+ * @user_data: User data to pass to @callback.
+ *
+ * Like control_host_proxy_new() but takes a #GBusType instead of a #GDBusConnection.
+ *
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call control_host_proxy_new_for_bus_finish() to get the result of the operation.
+ *
+ * See control_host_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.
+ */
+void
+control_host_proxy_new_for_bus (
+    GBusType             bus_type,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GAsyncReadyCallback  callback,
+    gpointer             user_data)
+{
+  g_async_initable_new_async (TYPE_CONTROL_HOST_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Host", NULL);
+}
+
+/**
+ * control_host_proxy_new_for_bus_finish:
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_host_proxy_new_for_bus().
+ * @error: Return location for error or %NULL
+ *
+ * Finishes an operation started with control_host_proxy_new_for_bus().
+ *
+ * Returns: (transfer full) (type ControlHostProxy): The constructed proxy object or %NULL if @error is set.
+ */
+ControlHost *
+control_host_proxy_new_for_bus_finish (
+    GAsyncResult        *res,
+    GError             **error)
+{
+  GObject *ret;
+  GObject *source_object;
+  source_object = g_async_result_get_source_object (res);
+  ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
+  g_object_unref (source_object);
+  if (ret != NULL)
+    return CONTROL_HOST (ret);
+  else
+    return NULL;
+}
+
+/**
+ * control_host_proxy_new_for_bus_sync:
+ * @bus_type: A #GBusType.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: A bus name (well-known or unique).
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL
+ *
+ * Like control_host_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection.
+ *
+ * The calling thread is blocked until a reply is received.
+ *
+ * See control_host_proxy_new_for_bus() for the asynchronous version of this constructor.
+ *
+ * Returns: (transfer full) (type ControlHostProxy): The constructed proxy object or %NULL if @error is set.
+ */
+ControlHost *
+control_host_proxy_new_for_bus_sync (
+    GBusType             bus_type,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GError             **error)
+{
+  GInitable *ret;
+  ret = g_initable_new (TYPE_CONTROL_HOST_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Host", NULL);
+  if (ret != NULL)
+    return CONTROL_HOST (ret);
+  else
+    return NULL;
+}
+
+
+/* ------------------------------------------------------------------------ */
+
+/**
+ * ControlHostSkeleton:
+ *
+ * The #ControlHostSkeleton structure contains only private data and should only be accessed using the provided API.
+ */
+
+/**
+ * ControlHostSkeletonClass:
+ * @parent_class: The parent class.
+ *
+ * Class structure for #ControlHostSkeleton.
+ */
+
+struct _ControlHostSkeletonPrivate
+{
+  GValue *properties;
+  GList *changed_properties;
+  GSource *changed_properties_idle_source;
+  GMainContext *context;
+  GMutex lock;
+};
+
+static void
+_control_host_skeleton_handle_method_call (
+  GDBusConnection *connection G_GNUC_UNUSED,
+  const gchar *sender G_GNUC_UNUSED,
+  const gchar *object_path G_GNUC_UNUSED,
+  const gchar *interface_name,
+  const gchar *method_name,
+  GVariant *parameters,
+  GDBusMethodInvocation *invocation,
+  gpointer user_data)
+{
+  ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (user_data);
+  _ExtendedGDBusMethodInfo *info;
+  GVariantIter iter;
+  GVariant *child;
+  GValue *paramv;
+  guint num_params;
+  guint num_extra;
+  guint n;
+  guint signal_id;
+  GValue return_value = G_VALUE_INIT;
+  info = (_ExtendedGDBusMethodInfo *) g_dbus_method_invocation_get_method_info (invocation);
+  g_assert (info != NULL);
+  num_params = g_variant_n_children (parameters);
+  num_extra = info->pass_fdlist ? 3 : 2;  paramv = g_new0 (GValue, num_params + num_extra);
+  n = 0;
+  g_value_init (&paramv[n], TYPE_CONTROL_HOST);
+  g_value_set_object (&paramv[n++], skeleton);
+  g_value_init (&paramv[n], G_TYPE_DBUS_METHOD_INVOCATION);
+  g_value_set_object (&paramv[n++], invocation);
+  if (info->pass_fdlist)
+    {
+#ifdef G_OS_UNIX
+      g_value_init (&paramv[n], G_TYPE_UNIX_FD_LIST);
+      g_value_set_object (&paramv[n++], g_dbus_message_get_unix_fd_list (g_dbus_method_invocation_get_message (invocation)));
+#else
+      g_assert_not_reached ();
+#endif
+    }
+  g_variant_iter_init (&iter, parameters);
+  while ((child = g_variant_iter_next_value (&iter)) != NULL)
+    {
+      _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.in_args[n - num_extra];
+      if (arg_info->use_gvariant)
+        {
+          g_value_init (&paramv[n], G_TYPE_VARIANT);
+          g_value_set_variant (&paramv[n], child);
+          n++;
+        }
+      else
+        g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
+      g_variant_unref (child);
+    }
+  signal_id = g_signal_lookup (info->signal_name, TYPE_CONTROL_HOST);
+  g_value_init (&return_value, G_TYPE_BOOLEAN);
+  g_signal_emitv (paramv, signal_id, 0, &return_value);
+  if (!g_value_get_boolean (&return_value))
+    g_dbus_method_invocation_return_error (invocation, G_DBUS_ERROR, G_DBUS_ERROR_UNKNOWN_METHOD, "Method %s is not implemented on interface %s", method_name, interface_name);
+  g_value_unset (&return_value);
+  for (n = 0; n < num_params + num_extra; n++)
+    g_value_unset (&paramv[n]);
+  g_free (paramv);
+}
+
+static GVariant *
+_control_host_skeleton_handle_get_property (
+  GDBusConnection *connection G_GNUC_UNUSED,
+  const gchar *sender G_GNUC_UNUSED,
+  const gchar *object_path G_GNUC_UNUSED,
+  const gchar *interface_name G_GNUC_UNUSED,
+  const gchar *property_name,
+  GError **error,
+  gpointer user_data)
+{
+  ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (user_data);
+  GValue value = G_VALUE_INIT;
+  GParamSpec *pspec;
+  _ExtendedGDBusPropertyInfo *info;
+  GVariant *ret;
+  ret = NULL;
+  info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct, property_name);
+  g_assert (info != NULL);
+  pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
+  if (pspec == NULL)
+    {
+      g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
+    }
+  else
+    {
+      g_value_init (&value, pspec->value_type);
+      g_object_get_property (G_OBJECT (skeleton), info->hyphen_name, &value);
+      ret = g_dbus_gvalue_to_gvariant (&value, G_VARIANT_TYPE (info->parent_struct.signature));
+      g_value_unset (&value);
+    }
+  return ret;
+}
+
+static gboolean
+_control_host_skeleton_handle_set_property (
+  GDBusConnection *connection G_GNUC_UNUSED,
+  const gchar *sender G_GNUC_UNUSED,
+  const gchar *object_path G_GNUC_UNUSED,
+  const gchar *interface_name G_GNUC_UNUSED,
+  const gchar *property_name,
+  GVariant *variant,
+  GError **error,
+  gpointer user_data)
+{
+  ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (user_data);
+  GValue value = G_VALUE_INIT;
+  GParamSpec *pspec;
+  _ExtendedGDBusPropertyInfo *info;
+  gboolean ret;
+  ret = FALSE;
+  info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct, property_name);
+  g_assert (info != NULL);
+  pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
+  if (pspec == NULL)
+    {
+      g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
+    }
+  else
+    {
+      if (info->use_gvariant)
+        g_value_set_variant (&value, variant);
+      else
+        g_dbus_gvariant_to_gvalue (variant, &value);
+      g_object_set_property (G_OBJECT (skeleton), info->hyphen_name, &value);
+      g_value_unset (&value);
+      ret = TRUE;
+    }
+  return ret;
+}
+
+static const GDBusInterfaceVTable _control_host_skeleton_vtable =
+{
+  _control_host_skeleton_handle_method_call,
+  _control_host_skeleton_handle_get_property,
+  _control_host_skeleton_handle_set_property,
+  {NULL}
+};
+
+static GDBusInterfaceInfo *
+control_host_skeleton_dbus_interface_get_info (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
+{
+  return control_host_interface_info ();
+}
+
+static GDBusInterfaceVTable *
+control_host_skeleton_dbus_interface_get_vtable (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
+{
+  return (GDBusInterfaceVTable *) &_control_host_skeleton_vtable;
+}
+
+static GVariant *
+control_host_skeleton_dbus_interface_get_properties (GDBusInterfaceSkeleton *_skeleton)
+{
+  ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (_skeleton);
+
+  GVariantBuilder builder;
+  guint n;
+  g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}"));
+  if (_control_host_interface_info.parent_struct.properties == NULL)
+    goto out;
+  for (n = 0; _control_host_interface_info.parent_struct.properties[n] != NULL; n++)
+    {
+      GDBusPropertyInfo *info = _control_host_interface_info.parent_struct.properties[n];
+      if (info->flags & G_DBUS_PROPERTY_INFO_FLAGS_READABLE)
+        {
+          GVariant *value;
+          value = _control_host_skeleton_handle_get_property (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)), NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.control.Host", info->name, NULL, skeleton);
+          if (value != NULL)
+            {
+              g_variant_take_ref (value);
+              g_variant_builder_add (&builder, "{sv}", info->name, value);
+              g_variant_unref (value);
+            }
+        }
+    }
+out:
+  return g_variant_builder_end (&builder);
+}
+
+static void
+control_host_skeleton_dbus_interface_flush (GDBusInterfaceSkeleton *_skeleton)
+{
+}
+
+static void
+_control_host_on_signal_booted (
+    ControlHost *object)
+{
+  ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (object);
+
+  GList      *connections, *l;
+  GVariant   *signal_variant;
+  connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton));
+
+  signal_variant = g_variant_ref_sink (g_variant_new ("()"));
+  for (l = connections; l != NULL; l = l->next)
+    {
+      GDBusConnection *connection = l->data;
+      g_dbus_connection_emit_signal (connection,
+        NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.control.Host", "Booted",
+        signal_variant, NULL);
+    }
+  g_variant_unref (signal_variant);
+  g_list_free_full (connections, g_object_unref);
+}
+
+static void control_host_skeleton_iface_init (ControlHostIface *iface);
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+G_DEFINE_TYPE_WITH_CODE (ControlHostSkeleton, control_host_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
+                         G_ADD_PRIVATE (ControlHostSkeleton)
+                         G_IMPLEMENT_INTERFACE (TYPE_CONTROL_HOST, control_host_skeleton_iface_init));
+
+#else
+G_DEFINE_TYPE_WITH_CODE (ControlHostSkeleton, control_host_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
+                         G_IMPLEMENT_INTERFACE (TYPE_CONTROL_HOST, control_host_skeleton_iface_init));
+
+#endif
+static void
+control_host_skeleton_finalize (GObject *object)
+{
+  ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (object);
+  g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free);
+  if (skeleton->priv->changed_properties_idle_source != NULL)
+    g_source_destroy (skeleton->priv->changed_properties_idle_source);
+  g_main_context_unref (skeleton->priv->context);
+  g_mutex_clear (&skeleton->priv->lock);
+  G_OBJECT_CLASS (control_host_skeleton_parent_class)->finalize (object);
+}
+
+static void
+control_host_skeleton_init (ControlHostSkeleton *skeleton)
+{
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+  skeleton->priv = control_host_skeleton_get_instance_private (skeleton);
+#else
+  skeleton->priv = G_TYPE_INSTANCE_GET_PRIVATE (skeleton, TYPE_CONTROL_HOST_SKELETON, ControlHostSkeletonPrivate);
+#endif
+
+  g_mutex_init (&skeleton->priv->lock);
+  skeleton->priv->context = g_main_context_ref_thread_default ();
+}
+
+static void
+control_host_skeleton_class_init (ControlHostSkeletonClass *klass)
+{
+  GObjectClass *gobject_class;
+  GDBusInterfaceSkeletonClass *skeleton_class;
+
+  gobject_class = G_OBJECT_CLASS (klass);
+  gobject_class->finalize = control_host_skeleton_finalize;
+
+  skeleton_class = G_DBUS_INTERFACE_SKELETON_CLASS (klass);
+  skeleton_class->get_info = control_host_skeleton_dbus_interface_get_info;
+  skeleton_class->get_properties = control_host_skeleton_dbus_interface_get_properties;
+  skeleton_class->flush = control_host_skeleton_dbus_interface_flush;
+  skeleton_class->get_vtable = control_host_skeleton_dbus_interface_get_vtable;
+
+#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
+  g_type_class_add_private (klass, sizeof (ControlHostSkeletonPrivate));
+#endif
+}
+
+static void
+control_host_skeleton_iface_init (ControlHostIface *iface)
+{
+  iface->booted = _control_host_on_signal_booted;
+}
+
+/**
+ * control_host_skeleton_new:
+ *
+ * Creates a skeleton object for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>.
+ *
+ * Returns: (transfer full) (type ControlHostSkeleton): The skeleton object.
+ */
+ControlHost *
+control_host_skeleton_new (void)
+{
+  return CONTROL_HOST (g_object_new (TYPE_CONTROL_HOST_SKELETON, NULL));
+}
+
+/* ------------------------------------------------------------------------
+ * Code for interface org.openbmc.control.Power
+ * ------------------------------------------------------------------------
+ */
+
+/**
+ * SECTION:ControlPower
+ * @title: ControlPower
+ * @short_description: Generated C code for the org.openbmc.control.Power D-Bus interface
+ *
+ * This section contains code for working with the <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link> D-Bus interface in C.
+ */
+
+/* ---- Introspection data for org.openbmc.control.Power ---- */
+
+static const _ExtendedGDBusArgInfo _control_power_method_info_set_power_state_IN_ARG_state =
+{
+  {
+    -1,
+    (gchar *) "state",
+    (gchar *) "i",
+    NULL
+  },
+  FALSE
+};
+
+static const _ExtendedGDBusArgInfo * const _control_power_method_info_set_power_state_IN_ARG_pointers[] =
+{
+  &_control_power_method_info_set_power_state_IN_ARG_state,
+  NULL
+};
+
+static const _ExtendedGDBusMethodInfo _control_power_method_info_set_power_state =
+{
+  {
+    -1,
+    (gchar *) "setPowerState",
+    (GDBusArgInfo **) &_control_power_method_info_set_power_state_IN_ARG_pointers,
+    NULL,
+    NULL
+  },
+  "handle-set-power-state",
+  FALSE
+};
+
+static const _ExtendedGDBusArgInfo _control_power_method_info_get_power_state_OUT_ARG_state =
+{
+  {
+    -1,
+    (gchar *) "state",
+    (gchar *) "i",
+    NULL
+  },
+  FALSE
+};
+
+static const _ExtendedGDBusArgInfo * const _control_power_method_info_get_power_state_OUT_ARG_pointers[] =
+{
+  &_control_power_method_info_get_power_state_OUT_ARG_state,
+  NULL
+};
+
+static const _ExtendedGDBusMethodInfo _control_power_method_info_get_power_state =
+{
+  {
+    -1,
+    (gchar *) "getPowerState",
+    NULL,
+    (GDBusArgInfo **) &_control_power_method_info_get_power_state_OUT_ARG_pointers,
+    NULL
+  },
+  "handle-get-power-state",
+  FALSE
+};
+
+static const _ExtendedGDBusMethodInfo * const _control_power_method_info_pointers[] =
+{
+  &_control_power_method_info_set_power_state,
+  &_control_power_method_info_get_power_state,
+  NULL
+};
+
+static const _ExtendedGDBusSignalInfo _control_power_signal_info_power_good =
+{
+  {
+    -1,
+    (gchar *) "PowerGood",
+    NULL,
+    NULL
+  },
+  "power-good"
+};
+
+static const _ExtendedGDBusSignalInfo _control_power_signal_info_power_lost =
+{
+  {
+    -1,
+    (gchar *) "PowerLost",
+    NULL,
+    NULL
+  },
+  "power-lost"
+};
+
+static const _ExtendedGDBusSignalInfo * const _control_power_signal_info_pointers[] =
+{
+  &_control_power_signal_info_power_good,
+  &_control_power_signal_info_power_lost,
+  NULL
+};
+
+static const _ExtendedGDBusPropertyInfo _control_power_property_info_pgood =
+{
+  {
+    -1,
+    (gchar *) "pgood",
+    (gchar *) "i",
+    G_DBUS_PROPERTY_INFO_FLAGS_READABLE,
+    NULL
+  },
+  "pgood",
+  FALSE
+};
+
+static const _ExtendedGDBusPropertyInfo _control_power_property_info_state =
+{
+  {
+    -1,
+    (gchar *) "state",
+    (gchar *) "i",
+    G_DBUS_PROPERTY_INFO_FLAGS_READABLE,
+    NULL
+  },
+  "state",
+  FALSE
+};
+
+static const _ExtendedGDBusPropertyInfo * const _control_power_property_info_pointers[] =
+{
+  &_control_power_property_info_pgood,
+  &_control_power_property_info_state,
+  NULL
+};
+
+static const _ExtendedGDBusInterfaceInfo _control_power_interface_info =
+{
+  {
+    -1,
+    (gchar *) "org.openbmc.control.Power",
+    (GDBusMethodInfo **) &_control_power_method_info_pointers,
+    (GDBusSignalInfo **) &_control_power_signal_info_pointers,
+    (GDBusPropertyInfo **) &_control_power_property_info_pointers,
+    NULL
+  },
+  "control-power",
+};
+
+
+/**
+ * control_power_interface_info:
+ *
+ * Gets a machine-readable description of the <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link> D-Bus interface.
+ *
+ * Returns: (transfer none): A #GDBusInterfaceInfo. Do not free.
+ */
+GDBusInterfaceInfo *
+control_power_interface_info (void)
+{
+  return (GDBusInterfaceInfo *) &_control_power_interface_info.parent_struct;
+}
+
+/**
+ * control_power_override_properties:
+ * @klass: The class structure for a #GObject<!-- -->-derived class.
+ * @property_id_begin: The property id to assign to the first overridden property.
+ *
+ * Overrides all #GObject properties in the #ControlPower interface for a concrete class.
+ * The properties are overridden in the order they are defined.
+ *
+ * Returns: The last property id.
+ */
+guint
+control_power_override_properties (GObjectClass *klass, guint property_id_begin)
+{
+  g_object_class_override_property (klass, property_id_begin++, "pgood");
+  g_object_class_override_property (klass, property_id_begin++, "state");
+  return property_id_begin - 1;
+}
+
+
+
+/**
+ * ControlPower:
+ *
+ * Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link>.
+ */
+
+/**
+ * ControlPowerIface:
+ * @parent_iface: The parent interface.
+ * @handle_get_power_state: Handler for the #ControlPower::handle-get-power-state signal.
+ * @handle_set_power_state: Handler for the #ControlPower::handle-set-power-state signal.
+ * @get_pgood: Getter for the #ControlPower:pgood property.
+ * @get_state: Getter for the #ControlPower:state property.
+ * @power_good: Handler for the #ControlPower::power-good signal.
+ * @power_lost: Handler for the #ControlPower::power-lost signal.
+ *
+ * Virtual table for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link>.
+ */
+
+typedef ControlPowerIface ControlPowerInterface;
+G_DEFINE_INTERFACE (ControlPower, control_power, G_TYPE_OBJECT);
+
+static void
+control_power_default_init (ControlPowerIface *iface)
+{
+  /* GObject signals for incoming D-Bus method calls: */
+  /**
+   * ControlPower::handle-set-power-state:
+   * @object: A #ControlPower.
+   * @invocation: A #GDBusMethodInvocation.
+   * @arg_state: Argument passed by remote caller.
+   *
+   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-control-Power.setPowerState">setPowerState()</link> D-Bus method.
+   *
+   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call control_power_complete_set_power_state() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
+   *
+   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
+   */
+  g_signal_new ("handle-set-power-state",
+    G_TYPE_FROM_INTERFACE (iface),
+    G_SIGNAL_RUN_LAST,
+    G_STRUCT_OFFSET (ControlPowerIface, handle_set_power_state),
+    g_signal_accumulator_true_handled,
+    NULL,
+    g_cclosure_marshal_generic,
+    G_TYPE_BOOLEAN,
+    2,
+    G_TYPE_DBUS_METHOD_INVOCATION, G_TYPE_INT);
+
+  /**
+   * ControlPower::handle-get-power-state:
+   * @object: A #ControlPower.
+   * @invocation: A #GDBusMethodInvocation.
+   *
+   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-control-Power.getPowerState">getPowerState()</link> D-Bus method.
+   *
+   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call control_power_complete_get_power_state() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
+   *
+   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
+   */
+  g_signal_new ("handle-get-power-state",
+    G_TYPE_FROM_INTERFACE (iface),
+    G_SIGNAL_RUN_LAST,
+    G_STRUCT_OFFSET (ControlPowerIface, handle_get_power_state),
+    g_signal_accumulator_true_handled,
+    NULL,
+    g_cclosure_marshal_generic,
+    G_TYPE_BOOLEAN,
+    1,
+    G_TYPE_DBUS_METHOD_INVOCATION);
+
+  /* GObject signals for received D-Bus signals: */
+  /**
+   * ControlPower::power-good:
+   * @object: A #ControlPower.
+   *
+   * On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-control-Power.PowerGood">"PowerGood"</link> is received.
+   *
+   * On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.
+   */
+  g_signal_new ("power-good",
+    G_TYPE_FROM_INTERFACE (iface),
+    G_SIGNAL_RUN_LAST,
+    G_STRUCT_OFFSET (ControlPowerIface, power_good),
+    NULL,
+    NULL,
+    g_cclosure_marshal_generic,
+    G_TYPE_NONE,
+    0);
+
+  /**
+   * ControlPower::power-lost:
+   * @object: A #ControlPower.
+   *
+   * On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-control-Power.PowerLost">"PowerLost"</link> is received.
+   *
+   * On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.
+   */
+  g_signal_new ("power-lost",
+    G_TYPE_FROM_INTERFACE (iface),
+    G_SIGNAL_RUN_LAST,
+    G_STRUCT_OFFSET (ControlPowerIface, power_lost),
+    NULL,
+    NULL,
+    g_cclosure_marshal_generic,
+    G_TYPE_NONE,
+    0);
+
+  /* GObject properties for D-Bus properties: */
+  /**
+   * ControlPower:pgood:
+   *
+   * Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-control-Power.pgood">"pgood"</link>.
+   *
+   * Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
+   */
+  g_object_interface_install_property (iface,
+    g_param_spec_int ("pgood", "pgood", "pgood", G_MININT32, G_MAXINT32, 0, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
+  /**
+   * ControlPower:state:
+   *
+   * Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-control-Power.state">"state"</link>.
+   *
+   * Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
+   */
+  g_object_interface_install_property (iface,
+    g_param_spec_int ("state", "state", "state", G_MININT32, G_MAXINT32, 0, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
+}
+
+/**
+ * control_power_get_pgood: (skip)
+ * @object: A #ControlPower.
+ *
+ * Gets the value of the <link linkend="gdbus-property-org-openbmc-control-Power.pgood">"pgood"</link> D-Bus property.
+ *
+ * Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
+ *
+ * Returns: The property value.
+ */
+gint 
+control_power_get_pgood (ControlPower *object)
+{
+  return CONTROL_POWER_GET_IFACE (object)->get_pgood (object);
+}
+
+/**
+ * control_power_set_pgood: (skip)
+ * @object: A #ControlPower.
+ * @value: The value to set.
+ *
+ * Sets the <link linkend="gdbus-property-org-openbmc-control-Power.pgood">"pgood"</link> D-Bus property to @value.
+ *
+ * Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.
+ */
+void
+control_power_set_pgood (ControlPower *object, gint value)
+{
+  g_object_set (G_OBJECT (object), "pgood", value, NULL);
+}
+
+/**
+ * control_power_get_state: (skip)
+ * @object: A #ControlPower.
+ *
+ * Gets the value of the <link linkend="gdbus-property-org-openbmc-control-Power.state">"state"</link> D-Bus property.
+ *
+ * Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
+ *
+ * Returns: The property value.
+ */
+gint 
+control_power_get_state (ControlPower *object)
+{
+  return CONTROL_POWER_GET_IFACE (object)->get_state (object);
+}
+
+/**
+ * control_power_set_state: (skip)
+ * @object: A #ControlPower.
+ * @value: The value to set.
+ *
+ * Sets the <link linkend="gdbus-property-org-openbmc-control-Power.state">"state"</link> D-Bus property to @value.
+ *
+ * Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.
+ */
+void
+control_power_set_state (ControlPower *object, gint value)
+{
+  g_object_set (G_OBJECT (object), "state", value, NULL);
+}
+
+/**
+ * control_power_emit_power_good:
+ * @object: A #ControlPower.
+ *
+ * Emits the <link linkend="gdbus-signal-org-openbmc-control-Power.PowerGood">"PowerGood"</link> D-Bus signal.
+ */
+void
+control_power_emit_power_good (
+    ControlPower *object)
+{
+  g_signal_emit_by_name (object, "power-good");
+}
+
+/**
+ * control_power_emit_power_lost:
+ * @object: A #ControlPower.
+ *
+ * Emits the <link linkend="gdbus-signal-org-openbmc-control-Power.PowerLost">"PowerLost"</link> D-Bus signal.
+ */
+void
+control_power_emit_power_lost (
+    ControlPower *object)
+{
+  g_signal_emit_by_name (object, "power-lost");
+}
+
+/**
+ * control_power_call_set_power_state:
+ * @proxy: A #ControlPowerProxy.
+ * @arg_state: Argument to pass with the method invocation.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
+ * @user_data: User data to pass to @callback.
+ *
+ * Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Power.setPowerState">setPowerState()</link> D-Bus method on @proxy.
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call control_power_call_set_power_state_finish() to get the result of the operation.
+ *
+ * See control_power_call_set_power_state_sync() for the synchronous, blocking version of this method.
+ */
+void
+control_power_call_set_power_state (
+    ControlPower *proxy,
+    gint arg_state,
+    GCancellable *cancellable,
+    GAsyncReadyCallback callback,
+    gpointer user_data)
+{
+  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
+    "setPowerState",
+    g_variant_new ("(i)",
+                   arg_state),
+    G_DBUS_CALL_FLAGS_NONE,
+    -1,
+    cancellable,
+    callback,
+    user_data);
+}
+
+/**
+ * control_power_call_set_power_state_finish:
+ * @proxy: A #ControlPowerProxy.
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_power_call_set_power_state().
+ * @error: Return location for error or %NULL.
+ *
+ * Finishes an operation started with control_power_call_set_power_state().
+ *
+ * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ */
+gboolean
+control_power_call_set_power_state_finish (
+    ControlPower *proxy,
+    GAsyncResult *res,
+    GError **error)
+{
+  GVariant *_ret;
+  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
+  if (_ret == NULL)
+    goto _out;
+  g_variant_get (_ret,
+                 "()");
+  g_variant_unref (_ret);
+_out:
+  return _ret != NULL;
+}
+
+/**
+ * control_power_call_set_power_state_sync:
+ * @proxy: A #ControlPowerProxy.
+ * @arg_state: Argument to pass with the method invocation.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL.
+ *
+ * Synchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Power.setPowerState">setPowerState()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
+ *
+ * See control_power_call_set_power_state() for the asynchronous version of this method.
+ *
+ * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ */
+gboolean
+control_power_call_set_power_state_sync (
+    ControlPower *proxy,
+    gint arg_state,
+    GCancellable *cancellable,
+    GError **error)
+{
+  GVariant *_ret;
+  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
+    "setPowerState",
+    g_variant_new ("(i)",
+                   arg_state),
+    G_DBUS_CALL_FLAGS_NONE,
+    -1,
+    cancellable,
+    error);
+  if (_ret == NULL)
+    goto _out;
+  g_variant_get (_ret,
+                 "()");
+  g_variant_unref (_ret);
+_out:
+  return _ret != NULL;
+}
+
+/**
+ * control_power_call_get_power_state:
+ * @proxy: A #ControlPowerProxy.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
+ * @user_data: User data to pass to @callback.
+ *
+ * Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Power.getPowerState">getPowerState()</link> D-Bus method on @proxy.
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call control_power_call_get_power_state_finish() to get the result of the operation.
+ *
+ * See control_power_call_get_power_state_sync() for the synchronous, blocking version of this method.
+ */
+void
+control_power_call_get_power_state (
+    ControlPower *proxy,
+    GCancellable *cancellable,
+    GAsyncReadyCallback callback,
+    gpointer user_data)
+{
+  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
+    "getPowerState",
+    g_variant_new ("()"),
+    G_DBUS_CALL_FLAGS_NONE,
+    -1,
+    cancellable,
+    callback,
+    user_data);
+}
+
+/**
+ * control_power_call_get_power_state_finish:
+ * @proxy: A #ControlPowerProxy.
+ * @out_state: (out): Return location for return parameter or %NULL to ignore.
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_power_call_get_power_state().
+ * @error: Return location for error or %NULL.
+ *
+ * Finishes an operation started with control_power_call_get_power_state().
+ *
+ * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ */
+gboolean
+control_power_call_get_power_state_finish (
+    ControlPower *proxy,
+    gint *out_state,
+    GAsyncResult *res,
+    GError **error)
+{
+  GVariant *_ret;
+  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
+  if (_ret == NULL)
+    goto _out;
+  g_variant_get (_ret,
+                 "(i)",
+                 out_state);
+  g_variant_unref (_ret);
+_out:
+  return _ret != NULL;
+}
+
+/**
+ * control_power_call_get_power_state_sync:
+ * @proxy: A #ControlPowerProxy.
+ * @out_state: (out): Return location for return parameter or %NULL to ignore.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL.
+ *
+ * Synchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Power.getPowerState">getPowerState()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
+ *
+ * See control_power_call_get_power_state() for the asynchronous version of this method.
+ *
+ * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
+ */
+gboolean
+control_power_call_get_power_state_sync (
+    ControlPower *proxy,
+    gint *out_state,
+    GCancellable *cancellable,
+    GError **error)
+{
+  GVariant *_ret;
+  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
+    "getPowerState",
+    g_variant_new ("()"),
+    G_DBUS_CALL_FLAGS_NONE,
+    -1,
+    cancellable,
+    error);
+  if (_ret == NULL)
+    goto _out;
+  g_variant_get (_ret,
+                 "(i)",
+                 out_state);
+  g_variant_unref (_ret);
+_out:
+  return _ret != NULL;
+}
+
+/**
+ * control_power_complete_set_power_state:
+ * @object: A #ControlPower.
+ * @invocation: (transfer full): A #GDBusMethodInvocation.
+ *
+ * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-control-Power.setPowerState">setPowerState()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
+ *
+ * This method will free @invocation, you cannot use it afterwards.
+ */
+void
+control_power_complete_set_power_state (
+    ControlPower *object,
+    GDBusMethodInvocation *invocation)
+{
+  g_dbus_method_invocation_return_value (invocation,
+    g_variant_new ("()"));
+}
+
+/**
+ * control_power_complete_get_power_state:
+ * @object: A #ControlPower.
+ * @invocation: (transfer full): A #GDBusMethodInvocation.
+ * @state: Parameter to return.
+ *
+ * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-control-Power.getPowerState">getPowerState()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
+ *
+ * This method will free @invocation, you cannot use it afterwards.
+ */
+void
+control_power_complete_get_power_state (
+    ControlPower *object,
+    GDBusMethodInvocation *invocation,
+    gint state)
+{
+  g_dbus_method_invocation_return_value (invocation,
+    g_variant_new ("(i)",
+                   state));
+}
+
+/* ------------------------------------------------------------------------ */
+
+/**
+ * ControlPowerProxy:
+ *
+ * The #ControlPowerProxy structure contains only private data and should only be accessed using the provided API.
+ */
+
+/**
+ * ControlPowerProxyClass:
+ * @parent_class: The parent class.
+ *
+ * Class structure for #ControlPowerProxy.
+ */
+
+struct _ControlPowerProxyPrivate
+{
+  GData *qdata;
+};
+
+static void control_power_proxy_iface_init (ControlPowerIface *iface);
+
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+G_DEFINE_TYPE_WITH_CODE (ControlPowerProxy, control_power_proxy, G_TYPE_DBUS_PROXY,
+                         G_ADD_PRIVATE (ControlPowerProxy)
+                         G_IMPLEMENT_INTERFACE (TYPE_CONTROL_POWER, control_power_proxy_iface_init));
+
+#else
+G_DEFINE_TYPE_WITH_CODE (ControlPowerProxy, control_power_proxy, G_TYPE_DBUS_PROXY,
+                         G_IMPLEMENT_INTERFACE (TYPE_CONTROL_POWER, control_power_proxy_iface_init));
+
+#endif
+static void
+control_power_proxy_finalize (GObject *object)
+{
+  ControlPowerProxy *proxy = CONTROL_POWER_PROXY (object);
+  g_datalist_clear (&proxy->priv->qdata);
+  G_OBJECT_CLASS (control_power_proxy_parent_class)->finalize (object);
+}
+
+static void
+control_power_proxy_get_property (GObject      *object,
+  guint         prop_id,
+  GValue       *value,
+  GParamSpec   *pspec G_GNUC_UNUSED)
+{
+  const _ExtendedGDBusPropertyInfo *info;
+  GVariant *variant;
+  g_assert (prop_id != 0 && prop_id - 1 < 2);
+  info = _control_power_property_info_pointers[prop_id - 1];
+  variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (object), info->parent_struct.name);
+  if (info->use_gvariant)
+    {
+      g_value_set_variant (value, variant);
+    }
+  else
+    {
+      if (variant != NULL)
+        g_dbus_gvariant_to_gvalue (variant, value);
+    }
+  if (variant != NULL)
+    g_variant_unref (variant);
+}
+
+static void
+control_power_proxy_set_property_cb (GDBusProxy *proxy,
+  GAsyncResult *res,
+  gpointer      user_data)
+{
+  const _ExtendedGDBusPropertyInfo *info = user_data;
+  GError *error;
+  GVariant *_ret;
+  error = NULL;
+  _ret = g_dbus_proxy_call_finish (proxy, res, &error);
+  if (!_ret)
+    {
+      g_warning ("Error setting property '%s' on interface org.openbmc.control.Power: %s (%s, %d)",
+                 info->parent_struct.name, 
+                 error->message, g_quark_to_string (error->domain), error->code);
+      g_error_free (error);
+    }
+  else
+    {
+      g_variant_unref (_ret);
+    }
+}
+
+static void
+control_power_proxy_set_property (GObject      *object,
+  guint         prop_id,
+  const GValue *value,
+  GParamSpec   *pspec G_GNUC_UNUSED)
+{
+  const _ExtendedGDBusPropertyInfo *info;
+  GVariant *variant;
+  g_assert (prop_id != 0 && prop_id - 1 < 2);
+  info = _control_power_property_info_pointers[prop_id - 1];
+  variant = g_dbus_gvalue_to_gvariant (value, G_VARIANT_TYPE (info->parent_struct.signature));
+  g_dbus_proxy_call (G_DBUS_PROXY (object),
+    "org.freedesktop.DBus.Properties.Set",
+    g_variant_new ("(ssv)", "org.openbmc.control.Power", info->parent_struct.name, variant),
+    G_DBUS_CALL_FLAGS_NONE,
+    -1,
+    NULL, (GAsyncReadyCallback) control_power_proxy_set_property_cb, (GDBusPropertyInfo *) &info->parent_struct);
+  g_variant_unref (variant);
+}
+
+static void
+control_power_proxy_g_signal (GDBusProxy *proxy,
+  const gchar *sender_name G_GNUC_UNUSED,
+  const gchar *signal_name,
+  GVariant *parameters)
+{
+  _ExtendedGDBusSignalInfo *info;
+  GVariantIter iter;
+  GVariant *child;
+  GValue *paramv;
+  guint num_params;
+  guint n;
+  guint signal_id;
+  info = (_ExtendedGDBusSignalInfo *) g_dbus_interface_info_lookup_signal ((GDBusInterfaceInfo *) &_control_power_interface_info.parent_struct, signal_name);
+  if (info == NULL)
+    return;
+  num_params = g_variant_n_children (parameters);
+  paramv = g_new0 (GValue, num_params + 1);
+  g_value_init (&paramv[0], TYPE_CONTROL_POWER);
+  g_value_set_object (&paramv[0], proxy);
+  g_variant_iter_init (&iter, parameters);
+  n = 1;
+  while ((child = g_variant_iter_next_value (&iter)) != NULL)
+    {
+      _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.args[n - 1];
+      if (arg_info->use_gvariant)
+        {
+          g_value_init (&paramv[n], G_TYPE_VARIANT);
+          g_value_set_variant (&paramv[n], child);
+          n++;
+        }
+      else
+        g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
+      g_variant_unref (child);
+    }
+  signal_id = g_signal_lookup (info->signal_name, TYPE_CONTROL_POWER);
+  g_signal_emitv (paramv, signal_id, 0, NULL);
+  for (n = 0; n < num_params + 1; n++)
+    g_value_unset (&paramv[n]);
+  g_free (paramv);
+}
+
+static void
+control_power_proxy_g_properties_changed (GDBusProxy *_proxy,
+  GVariant *changed_properties,
+  const gchar *const *invalidated_properties)
+{
+  ControlPowerProxy *proxy = CONTROL_POWER_PROXY (_proxy);
+  guint n;
+  const gchar *key;
+  GVariantIter *iter;
+  _ExtendedGDBusPropertyInfo *info;
+  g_variant_get (changed_properties, "a{sv}", &iter);
+  while (g_variant_iter_next (iter, "{&sv}", &key, NULL))
+    {
+      info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_power_interface_info.parent_struct, key);
+      g_datalist_remove_data (&proxy->priv->qdata, key);
+      if (info != NULL)
+        g_object_notify (G_OBJECT (proxy), info->hyphen_name);
+    }
+  g_variant_iter_free (iter);
+  for (n = 0; invalidated_properties[n] != NULL; n++)
+    {
+      info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_power_interface_info.parent_struct, invalidated_properties[n]);
+      g_datalist_remove_data (&proxy->priv->qdata, invalidated_properties[n]);
+      if (info != NULL)
+        g_object_notify (G_OBJECT (proxy), info->hyphen_name);
+    }
+}
+
+static gint 
+control_power_proxy_get_pgood (ControlPower *object)
+{
+  ControlPowerProxy *proxy = CONTROL_POWER_PROXY (object);
+  GVariant *variant;
+  gint value = 0;
+  variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "pgood");
+  if (variant != NULL)
+    {
+      value = g_variant_get_int32 (variant);
+      g_variant_unref (variant);
+    }
+  return value;
+}
+
+static gint 
+control_power_proxy_get_state (ControlPower *object)
+{
+  ControlPowerProxy *proxy = CONTROL_POWER_PROXY (object);
+  GVariant *variant;
+  gint value = 0;
+  variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "state");
+  if (variant != NULL)
+    {
+      value = g_variant_get_int32 (variant);
+      g_variant_unref (variant);
+    }
+  return value;
+}
+
+static void
+control_power_proxy_init (ControlPowerProxy *proxy)
+{
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+  proxy->priv = control_power_proxy_get_instance_private (proxy);
+#else
+  proxy->priv = G_TYPE_INSTANCE_GET_PRIVATE (proxy, TYPE_CONTROL_POWER_PROXY, ControlPowerProxyPrivate);
+#endif
+
+  g_dbus_proxy_set_interface_info (G_DBUS_PROXY (proxy), control_power_interface_info ());
+}
+
+static void
+control_power_proxy_class_init (ControlPowerProxyClass *klass)
+{
+  GObjectClass *gobject_class;
+  GDBusProxyClass *proxy_class;
+
+  gobject_class = G_OBJECT_CLASS (klass);
+  gobject_class->finalize     = control_power_proxy_finalize;
+  gobject_class->get_property = control_power_proxy_get_property;
+  gobject_class->set_property = control_power_proxy_set_property;
+
+  proxy_class = G_DBUS_PROXY_CLASS (klass);
+  proxy_class->g_signal = control_power_proxy_g_signal;
+  proxy_class->g_properties_changed = control_power_proxy_g_properties_changed;
+
+  control_power_override_properties (gobject_class, 1);
+
+#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
+  g_type_class_add_private (klass, sizeof (ControlPowerProxyPrivate));
+#endif
+}
+
+static void
+control_power_proxy_iface_init (ControlPowerIface *iface)
+{
+  iface->get_pgood = control_power_proxy_get_pgood;
+  iface->get_state = control_power_proxy_get_state;
+}
+
+/**
+ * control_power_proxy_new:
+ * @connection: A #GDBusConnection.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
+ * @user_data: User data to pass to @callback.
+ *
+ * Asynchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link>. See g_dbus_proxy_new() for more details.
+ *
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call control_power_proxy_new_finish() to get the result of the operation.
+ *
+ * See control_power_proxy_new_sync() for the synchronous, blocking version of this constructor.
+ */
+void
+control_power_proxy_new (
+    GDBusConnection     *connection,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GAsyncReadyCallback  callback,
+    gpointer             user_data)
+{
+  g_async_initable_new_async (TYPE_CONTROL_POWER_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Power", NULL);
+}
+
+/**
+ * control_power_proxy_new_finish:
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_power_proxy_new().
+ * @error: Return location for error or %NULL
+ *
+ * Finishes an operation started with control_power_proxy_new().
+ *
+ * Returns: (transfer full) (type ControlPowerProxy): The constructed proxy object or %NULL if @error is set.
+ */
+ControlPower *
+control_power_proxy_new_finish (
+    GAsyncResult        *res,
+    GError             **error)
+{
+  GObject *ret;
+  GObject *source_object;
+  source_object = g_async_result_get_source_object (res);
+  ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
+  g_object_unref (source_object);
+  if (ret != NULL)
+    return CONTROL_POWER (ret);
+  else
+    return NULL;
+}
+
+/**
+ * control_power_proxy_new_sync:
+ * @connection: A #GDBusConnection.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL
+ *
+ * Synchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link>. See g_dbus_proxy_new_sync() for more details.
+ *
+ * The calling thread is blocked until a reply is received.
+ *
+ * See control_power_proxy_new() for the asynchronous version of this constructor.
+ *
+ * Returns: (transfer full) (type ControlPowerProxy): The constructed proxy object or %NULL if @error is set.
+ */
+ControlPower *
+control_power_proxy_new_sync (
+    GDBusConnection     *connection,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GError             **error)
+{
+  GInitable *ret;
+  ret = g_initable_new (TYPE_CONTROL_POWER_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Power", NULL);
+  if (ret != NULL)
+    return CONTROL_POWER (ret);
+  else
+    return NULL;
+}
+
+
+/**
+ * control_power_proxy_new_for_bus:
+ * @bus_type: A #GBusType.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: A bus name (well-known or unique).
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
+ * @user_data: User data to pass to @callback.
+ *
+ * Like control_power_proxy_new() but takes a #GBusType instead of a #GDBusConnection.
+ *
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call control_power_proxy_new_for_bus_finish() to get the result of the operation.
+ *
+ * See control_power_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.
+ */
+void
+control_power_proxy_new_for_bus (
+    GBusType             bus_type,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GAsyncReadyCallback  callback,
+    gpointer             user_data)
+{
+  g_async_initable_new_async (TYPE_CONTROL_POWER_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Power", NULL);
+}
+
+/**
+ * control_power_proxy_new_for_bus_finish:
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_power_proxy_new_for_bus().
+ * @error: Return location for error or %NULL
+ *
+ * Finishes an operation started with control_power_proxy_new_for_bus().
+ *
+ * Returns: (transfer full) (type ControlPowerProxy): The constructed proxy object or %NULL if @error is set.
+ */
+ControlPower *
+control_power_proxy_new_for_bus_finish (
+    GAsyncResult        *res,
+    GError             **error)
+{
+  GObject *ret;
+  GObject *source_object;
+  source_object = g_async_result_get_source_object (res);
+  ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
+  g_object_unref (source_object);
+  if (ret != NULL)
+    return CONTROL_POWER (ret);
+  else
+    return NULL;
+}
+
+/**
+ * control_power_proxy_new_for_bus_sync:
+ * @bus_type: A #GBusType.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: A bus name (well-known or unique).
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL
+ *
+ * Like control_power_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection.
+ *
+ * The calling thread is blocked until a reply is received.
+ *
+ * See control_power_proxy_new_for_bus() for the asynchronous version of this constructor.
+ *
+ * Returns: (transfer full) (type ControlPowerProxy): The constructed proxy object or %NULL if @error is set.
+ */
+ControlPower *
+control_power_proxy_new_for_bus_sync (
+    GBusType             bus_type,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GError             **error)
+{
+  GInitable *ret;
+  ret = g_initable_new (TYPE_CONTROL_POWER_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Power", NULL);
+  if (ret != NULL)
+    return CONTROL_POWER (ret);
+  else
+    return NULL;
+}
+
+
+/* ------------------------------------------------------------------------ */
+
+/**
+ * ControlPowerSkeleton:
+ *
+ * The #ControlPowerSkeleton structure contains only private data and should only be accessed using the provided API.
+ */
+
+/**
+ * ControlPowerSkeletonClass:
+ * @parent_class: The parent class.
+ *
+ * Class structure for #ControlPowerSkeleton.
+ */
+
+struct _ControlPowerSkeletonPrivate
+{
+  GValue *properties;
+  GList *changed_properties;
+  GSource *changed_properties_idle_source;
+  GMainContext *context;
+  GMutex lock;
+};
+
+static void
+_control_power_skeleton_handle_method_call (
+  GDBusConnection *connection G_GNUC_UNUSED,
+  const gchar *sender G_GNUC_UNUSED,
+  const gchar *object_path G_GNUC_UNUSED,
+  const gchar *interface_name,
+  const gchar *method_name,
+  GVariant *parameters,
+  GDBusMethodInvocation *invocation,
+  gpointer user_data)
+{
+  ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (user_data);
+  _ExtendedGDBusMethodInfo *info;
+  GVariantIter iter;
+  GVariant *child;
+  GValue *paramv;
+  guint num_params;
+  guint num_extra;
+  guint n;
+  guint signal_id;
+  GValue return_value = G_VALUE_INIT;
+  info = (_ExtendedGDBusMethodInfo *) g_dbus_method_invocation_get_method_info (invocation);
+  g_assert (info != NULL);
+  num_params = g_variant_n_children (parameters);
+  num_extra = info->pass_fdlist ? 3 : 2;  paramv = g_new0 (GValue, num_params + num_extra);
+  n = 0;
+  g_value_init (&paramv[n], TYPE_CONTROL_POWER);
+  g_value_set_object (&paramv[n++], skeleton);
+  g_value_init (&paramv[n], G_TYPE_DBUS_METHOD_INVOCATION);
+  g_value_set_object (&paramv[n++], invocation);
+  if (info->pass_fdlist)
+    {
+#ifdef G_OS_UNIX
+      g_value_init (&paramv[n], G_TYPE_UNIX_FD_LIST);
+      g_value_set_object (&paramv[n++], g_dbus_message_get_unix_fd_list (g_dbus_method_invocation_get_message (invocation)));
+#else
+      g_assert_not_reached ();
+#endif
+    }
+  g_variant_iter_init (&iter, parameters);
+  while ((child = g_variant_iter_next_value (&iter)) != NULL)
+    {
+      _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.in_args[n - num_extra];
+      if (arg_info->use_gvariant)
+        {
+          g_value_init (&paramv[n], G_TYPE_VARIANT);
+          g_value_set_variant (&paramv[n], child);
+          n++;
+        }
+      else
+        g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
+      g_variant_unref (child);
+    }
+  signal_id = g_signal_lookup (info->signal_name, TYPE_CONTROL_POWER);
+  g_value_init (&return_value, G_TYPE_BOOLEAN);
+  g_signal_emitv (paramv, signal_id, 0, &return_value);
+  if (!g_value_get_boolean (&return_value))
+    g_dbus_method_invocation_return_error (invocation, G_DBUS_ERROR, G_DBUS_ERROR_UNKNOWN_METHOD, "Method %s is not implemented on interface %s", method_name, interface_name);
+  g_value_unset (&return_value);
+  for (n = 0; n < num_params + num_extra; n++)
+    g_value_unset (&paramv[n]);
+  g_free (paramv);
+}
+
+static GVariant *
+_control_power_skeleton_handle_get_property (
+  GDBusConnection *connection G_GNUC_UNUSED,
+  const gchar *sender G_GNUC_UNUSED,
+  const gchar *object_path G_GNUC_UNUSED,
+  const gchar *interface_name G_GNUC_UNUSED,
+  const gchar *property_name,
+  GError **error,
+  gpointer user_data)
+{
+  ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (user_data);
+  GValue value = G_VALUE_INIT;
+  GParamSpec *pspec;
+  _ExtendedGDBusPropertyInfo *info;
+  GVariant *ret;
+  ret = NULL;
+  info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_power_interface_info.parent_struct, property_name);
+  g_assert (info != NULL);
+  pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
+  if (pspec == NULL)
+    {
+      g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
+    }
+  else
+    {
+      g_value_init (&value, pspec->value_type);
+      g_object_get_property (G_OBJECT (skeleton), info->hyphen_name, &value);
+      ret = g_dbus_gvalue_to_gvariant (&value, G_VARIANT_TYPE (info->parent_struct.signature));
+      g_value_unset (&value);
+    }
+  return ret;
+}
+
+static gboolean
+_control_power_skeleton_handle_set_property (
+  GDBusConnection *connection G_GNUC_UNUSED,
+  const gchar *sender G_GNUC_UNUSED,
+  const gchar *object_path G_GNUC_UNUSED,
+  const gchar *interface_name G_GNUC_UNUSED,
+  const gchar *property_name,
+  GVariant *variant,
+  GError **error,
+  gpointer user_data)
+{
+  ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (user_data);
+  GValue value = G_VALUE_INIT;
+  GParamSpec *pspec;
+  _ExtendedGDBusPropertyInfo *info;
+  gboolean ret;
+  ret = FALSE;
+  info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_power_interface_info.parent_struct, property_name);
+  g_assert (info != NULL);
+  pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
+  if (pspec == NULL)
+    {
+      g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
+    }
+  else
+    {
+      if (info->use_gvariant)
+        g_value_set_variant (&value, variant);
+      else
+        g_dbus_gvariant_to_gvalue (variant, &value);
+      g_object_set_property (G_OBJECT (skeleton), info->hyphen_name, &value);
+      g_value_unset (&value);
+      ret = TRUE;
+    }
+  return ret;
+}
+
+static const GDBusInterfaceVTable _control_power_skeleton_vtable =
+{
+  _control_power_skeleton_handle_method_call,
+  _control_power_skeleton_handle_get_property,
+  _control_power_skeleton_handle_set_property,
+  {NULL}
+};
+
+static GDBusInterfaceInfo *
+control_power_skeleton_dbus_interface_get_info (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
+{
+  return control_power_interface_info ();
+}
+
+static GDBusInterfaceVTable *
+control_power_skeleton_dbus_interface_get_vtable (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
+{
+  return (GDBusInterfaceVTable *) &_control_power_skeleton_vtable;
+}
+
+static GVariant *
+control_power_skeleton_dbus_interface_get_properties (GDBusInterfaceSkeleton *_skeleton)
+{
+  ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (_skeleton);
+
+  GVariantBuilder builder;
+  guint n;
+  g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}"));
+  if (_control_power_interface_info.parent_struct.properties == NULL)
+    goto out;
+  for (n = 0; _control_power_interface_info.parent_struct.properties[n] != NULL; n++)
+    {
+      GDBusPropertyInfo *info = _control_power_interface_info.parent_struct.properties[n];
+      if (info->flags & G_DBUS_PROPERTY_INFO_FLAGS_READABLE)
+        {
+          GVariant *value;
+          value = _control_power_skeleton_handle_get_property (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)), NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.control.Power", info->name, NULL, skeleton);
+          if (value != NULL)
+            {
+              g_variant_take_ref (value);
+              g_variant_builder_add (&builder, "{sv}", info->name, value);
+              g_variant_unref (value);
+            }
+        }
+    }
+out:
+  return g_variant_builder_end (&builder);
+}
+
+static gboolean _control_power_emit_changed (gpointer user_data);
+
+static void
+control_power_skeleton_dbus_interface_flush (GDBusInterfaceSkeleton *_skeleton)
+{
+  ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (_skeleton);
+  gboolean emit_changed = FALSE;
+
+  g_mutex_lock (&skeleton->priv->lock);
+  if (skeleton->priv->changed_properties_idle_source != NULL)
+    {
+      g_source_destroy (skeleton->priv->changed_properties_idle_source);
+      skeleton->priv->changed_properties_idle_source = NULL;
+      emit_changed = TRUE;
+    }
+  g_mutex_unlock (&skeleton->priv->lock);
+
+  if (emit_changed)
+    _control_power_emit_changed (skeleton);
+}
+
+static void
+_control_power_on_signal_power_good (
+    ControlPower *object)
+{
+  ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
+
+  GList      *connections, *l;
+  GVariant   *signal_variant;
+  connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton));
+
+  signal_variant = g_variant_ref_sink (g_variant_new ("()"));
+  for (l = connections; l != NULL; l = l->next)
+    {
+      GDBusConnection *connection = l->data;
+      g_dbus_connection_emit_signal (connection,
+        NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.control.Power", "PowerGood",
+        signal_variant, NULL);
+    }
+  g_variant_unref (signal_variant);
+  g_list_free_full (connections, g_object_unref);
+}
+
+static void
+_control_power_on_signal_power_lost (
+    ControlPower *object)
+{
+  ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
+
+  GList      *connections, *l;
+  GVariant   *signal_variant;
+  connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton));
+
+  signal_variant = g_variant_ref_sink (g_variant_new ("()"));
+  for (l = connections; l != NULL; l = l->next)
+    {
+      GDBusConnection *connection = l->data;
+      g_dbus_connection_emit_signal (connection,
+        NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.control.Power", "PowerLost",
+        signal_variant, NULL);
+    }
+  g_variant_unref (signal_variant);
+  g_list_free_full (connections, g_object_unref);
+}
+
+static void control_power_skeleton_iface_init (ControlPowerIface *iface);
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+G_DEFINE_TYPE_WITH_CODE (ControlPowerSkeleton, control_power_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
+                         G_ADD_PRIVATE (ControlPowerSkeleton)
+                         G_IMPLEMENT_INTERFACE (TYPE_CONTROL_POWER, control_power_skeleton_iface_init));
+
+#else
+G_DEFINE_TYPE_WITH_CODE (ControlPowerSkeleton, control_power_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
+                         G_IMPLEMENT_INTERFACE (TYPE_CONTROL_POWER, control_power_skeleton_iface_init));
+
+#endif
+static void
+control_power_skeleton_finalize (GObject *object)
+{
+  ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
+  guint n;
+  for (n = 0; n < 2; n++)
+    g_value_unset (&skeleton->priv->properties[n]);
+  g_free (skeleton->priv->properties);
+  g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free);
+  if (skeleton->priv->changed_properties_idle_source != NULL)
+    g_source_destroy (skeleton->priv->changed_properties_idle_source);
+  g_main_context_unref (skeleton->priv->context);
+  g_mutex_clear (&skeleton->priv->lock);
+  G_OBJECT_CLASS (control_power_skeleton_parent_class)->finalize (object);
+}
+
+static void
+control_power_skeleton_get_property (GObject      *object,
+  guint         prop_id,
+  GValue       *value,
+  GParamSpec   *pspec G_GNUC_UNUSED)
+{
+  ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
+  g_assert (prop_id != 0 && prop_id - 1 < 2);
+  g_mutex_lock (&skeleton->priv->lock);
+  g_value_copy (&skeleton->priv->properties[prop_id - 1], value);
+  g_mutex_unlock (&skeleton->priv->lock);
+}
+
+static gboolean
+_control_power_emit_changed (gpointer user_data)
+{
+  ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (user_data);
+  GList *l;
+  GVariantBuilder builder;
+  GVariantBuilder invalidated_builder;
+  guint num_changes;
+
+  g_mutex_lock (&skeleton->priv->lock);
+  g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}"));
+  g_variant_builder_init (&invalidated_builder, G_VARIANT_TYPE ("as"));
+  for (l = skeleton->priv->changed_properties, num_changes = 0; l != NULL; l = l->next)
+    {
+      ChangedProperty *cp = l->data;
+      GVariant *variant;
+      const GValue *cur_value;
+
+      cur_value = &skeleton->priv->properties[cp->prop_id - 1];
+      if (!_g_value_equal (cur_value, &cp->orig_value))
+        {
+          variant = g_dbus_gvalue_to_gvariant (cur_value, G_VARIANT_TYPE (cp->info->parent_struct.signature));
+          g_variant_builder_add (&builder, "{sv}", cp->info->parent_struct.name, variant);
+          g_variant_unref (variant);
+          num_changes++;
+        }
+    }
+  if (num_changes > 0)
+    {
+      GList *connections, *ll;
+      GVariant *signal_variant;
+      signal_variant = g_variant_ref_sink (g_variant_new ("(sa{sv}as)", "org.openbmc.control.Power",
+                                           &builder, &invalidated_builder));
+      connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton));
+      for (ll = connections; ll != NULL; ll = ll->next)
+        {
+          GDBusConnection *connection = ll->data;
+
+          g_dbus_connection_emit_signal (connection,
+                                         NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)),
+                                         "org.freedesktop.DBus.Properties",
+                                         "PropertiesChanged",
+                                         signal_variant,
+                                         NULL);
+        }
+      g_variant_unref (signal_variant);
+      g_list_free_full (connections, g_object_unref);
+    }
+  else
+    {
+      g_variant_builder_clear (&builder);
+      g_variant_builder_clear (&invalidated_builder);
+    }
+  g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free);
+  skeleton->priv->changed_properties = NULL;
+  skeleton->priv->changed_properties_idle_source = NULL;
+  g_mutex_unlock (&skeleton->priv->lock);
+  return FALSE;
+}
+
+static void
+_control_power_schedule_emit_changed (ControlPowerSkeleton *skeleton, const _ExtendedGDBusPropertyInfo *info, guint prop_id, const GValue *orig_value)
+{
+  ChangedProperty *cp;
+  GList *l;
+  cp = NULL;
+  for (l = skeleton->priv->changed_properties; l != NULL; l = l->next)
+    {
+      ChangedProperty *i_cp = l->data;
+      if (i_cp->info == info)
+        {
+          cp = i_cp;
+          break;
+        }
+    }
+  if (cp == NULL)
+    {
+      cp = g_new0 (ChangedProperty, 1);
+      cp->prop_id = prop_id;
+      cp->info = info;
+      skeleton->priv->changed_properties = g_list_prepend (skeleton->priv->changed_properties, cp);
+      g_value_init (&cp->orig_value, G_VALUE_TYPE (orig_value));
+      g_value_copy (orig_value, &cp->orig_value);
+    }
+}
+
+static void
+control_power_skeleton_notify (GObject      *object,
+  GParamSpec *pspec G_GNUC_UNUSED)
+{
+  ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
+  g_mutex_lock (&skeleton->priv->lock);
+  if (skeleton->priv->changed_properties != NULL &&
+      skeleton->priv->changed_properties_idle_source == NULL)
+    {
+      skeleton->priv->changed_properties_idle_source = g_idle_source_new ();
+      g_source_set_priority (skeleton->priv->changed_properties_idle_source, G_PRIORITY_DEFAULT);
+      g_source_set_callback (skeleton->priv->changed_properties_idle_source, _control_power_emit_changed, g_object_ref (skeleton), (GDestroyNotify) g_object_unref);
+      g_source_attach (skeleton->priv->changed_properties_idle_source, skeleton->priv->context);
+      g_source_unref (skeleton->priv->changed_properties_idle_source);
+    }
+  g_mutex_unlock (&skeleton->priv->lock);
+}
+
+static void
+control_power_skeleton_set_property (GObject      *object,
+  guint         prop_id,
+  const GValue *value,
+  GParamSpec   *pspec)
+{
+  ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
+  g_assert (prop_id != 0 && prop_id - 1 < 2);
+  g_mutex_lock (&skeleton->priv->lock);
+  g_object_freeze_notify (object);
+  if (!_g_value_equal (value, &skeleton->priv->properties[prop_id - 1]))
+    {
+      if (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)) != NULL)
+        _control_power_schedule_emit_changed (skeleton, _control_power_property_info_pointers[prop_id - 1], prop_id, &skeleton->priv->properties[prop_id - 1]);
+      g_value_copy (value, &skeleton->priv->properties[prop_id - 1]);
+      g_object_notify_by_pspec (object, pspec);
+    }
+  g_mutex_unlock (&skeleton->priv->lock);
+  g_object_thaw_notify (object);
+}
+
+static void
+control_power_skeleton_init (ControlPowerSkeleton *skeleton)
+{
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+  skeleton->priv = control_power_skeleton_get_instance_private (skeleton);
+#else
+  skeleton->priv = G_TYPE_INSTANCE_GET_PRIVATE (skeleton, TYPE_CONTROL_POWER_SKELETON, ControlPowerSkeletonPrivate);
+#endif
+
+  g_mutex_init (&skeleton->priv->lock);
+  skeleton->priv->context = g_main_context_ref_thread_default ();
+  skeleton->priv->properties = g_new0 (GValue, 2);
+  g_value_init (&skeleton->priv->properties[0], G_TYPE_INT);
+  g_value_init (&skeleton->priv->properties[1], G_TYPE_INT);
+}
+
+static gint 
+control_power_skeleton_get_pgood (ControlPower *object)
+{
+  ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
+  gint value;
+  g_mutex_lock (&skeleton->priv->lock);
+  value = g_value_get_int (&(skeleton->priv->properties[0]));
+  g_mutex_unlock (&skeleton->priv->lock);
+  return value;
+}
+
+static gint 
+control_power_skeleton_get_state (ControlPower *object)
+{
+  ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
+  gint value;
+  g_mutex_lock (&skeleton->priv->lock);
+  value = g_value_get_int (&(skeleton->priv->properties[1]));
+  g_mutex_unlock (&skeleton->priv->lock);
+  return value;
+}
+
+static void
+control_power_skeleton_class_init (ControlPowerSkeletonClass *klass)
+{
+  GObjectClass *gobject_class;
+  GDBusInterfaceSkeletonClass *skeleton_class;
+
+  gobject_class = G_OBJECT_CLASS (klass);
+  gobject_class->finalize = control_power_skeleton_finalize;
+  gobject_class->get_property = control_power_skeleton_get_property;
+  gobject_class->set_property = control_power_skeleton_set_property;
+  gobject_class->notify       = control_power_skeleton_notify;
+
+
+  control_power_override_properties (gobject_class, 1);
+
+  skeleton_class = G_DBUS_INTERFACE_SKELETON_CLASS (klass);
+  skeleton_class->get_info = control_power_skeleton_dbus_interface_get_info;
+  skeleton_class->get_properties = control_power_skeleton_dbus_interface_get_properties;
+  skeleton_class->flush = control_power_skeleton_dbus_interface_flush;
+  skeleton_class->get_vtable = control_power_skeleton_dbus_interface_get_vtable;
+
+#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
+  g_type_class_add_private (klass, sizeof (ControlPowerSkeletonPrivate));
+#endif
+}
+
+static void
+control_power_skeleton_iface_init (ControlPowerIface *iface)
+{
+  iface->power_good = _control_power_on_signal_power_good;
+  iface->power_lost = _control_power_on_signal_power_lost;
+  iface->get_pgood = control_power_skeleton_get_pgood;
+  iface->get_state = control_power_skeleton_get_state;
+}
+
+/**
+ * control_power_skeleton_new:
+ *
+ * Creates a skeleton object for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link>.
+ *
+ * Returns: (transfer full) (type ControlPowerSkeleton): The skeleton object.
+ */
+ControlPower *
+control_power_skeleton_new (void)
+{
+  return CONTROL_POWER (g_object_new (TYPE_CONTROL_POWER_SKELETON, NULL));
+}
+
+/* ------------------------------------------------------------------------
+ * Code for interface org.openbmc.EventLog
+ * ------------------------------------------------------------------------
+ */
+
+/**
+ * SECTION:EventLog
+ * @title: EventLog
+ * @short_description: Generated C code for the org.openbmc.EventLog D-Bus interface
+ *
+ * This section contains code for working with the <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link> D-Bus interface in C.
+ */
+
+/* ---- Introspection data for org.openbmc.EventLog ---- */
+
+static const _ExtendedGDBusArgInfo _event_log_signal_info_event_log_ARG_message =
+{
+  {
+    -1,
+    (gchar *) "message",
+    (gchar *) "a{ss}",
+    NULL
+  },
+  FALSE
+};
+
+static const _ExtendedGDBusArgInfo * const _event_log_signal_info_event_log_ARG_pointers[] =
+{
+  &_event_log_signal_info_event_log_ARG_message,
+  NULL
+};
+
+static const _ExtendedGDBusSignalInfo _event_log_signal_info_event_log =
+{
+  {
+    -1,
+    (gchar *) "EventLog",
+    (GDBusArgInfo **) &_event_log_signal_info_event_log_ARG_pointers,
+    NULL
+  },
+  "event-log"
+};
+
+static const _ExtendedGDBusSignalInfo * const _event_log_signal_info_pointers[] =
+{
+  &_event_log_signal_info_event_log,
+  NULL
+};
+
+static const _ExtendedGDBusInterfaceInfo _event_log_interface_info =
+{
+  {
+    -1,
+    (gchar *) "org.openbmc.EventLog",
+    NULL,
+    (GDBusSignalInfo **) &_event_log_signal_info_pointers,
+    NULL,
+    NULL
+  },
+  "event-log",
+};
+
+
+/**
+ * event_log_interface_info:
+ *
+ * Gets a machine-readable description of the <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link> D-Bus interface.
+ *
+ * Returns: (transfer none): A #GDBusInterfaceInfo. Do not free.
+ */
+GDBusInterfaceInfo *
+event_log_interface_info (void)
+{
+  return (GDBusInterfaceInfo *) &_event_log_interface_info.parent_struct;
+}
+
+/**
+ * event_log_override_properties:
+ * @klass: The class structure for a #GObject<!-- -->-derived class.
+ * @property_id_begin: The property id to assign to the first overridden property.
+ *
+ * Overrides all #GObject properties in the #EventLog interface for a concrete class.
+ * The properties are overridden in the order they are defined.
+ *
+ * Returns: The last property id.
+ */
+guint
+event_log_override_properties (GObjectClass *klass, guint property_id_begin)
+{
+  return property_id_begin - 1;
+}
+
+
+
+/**
+ * EventLog:
+ *
+ * Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link>.
+ */
+
+/**
+ * EventLogIface:
+ * @parent_iface: The parent interface.
+ * @event_log: Handler for the #EventLog::event-log signal.
+ *
+ * Virtual table for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link>.
+ */
+
+typedef EventLogIface EventLogInterface;
+G_DEFINE_INTERFACE (EventLog, event_log, G_TYPE_OBJECT);
+
+static void
+event_log_default_init (EventLogIface *iface)
+{
+  /* GObject signals for received D-Bus signals: */
+  /**
+   * EventLog::event-log:
+   * @object: A #EventLog.
+   * @arg_message: Argument.
+   *
+   * On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-EventLog.EventLog">"EventLog"</link> is received.
+   *
+   * On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.
+   */
+  g_signal_new ("event-log",
+    G_TYPE_FROM_INTERFACE (iface),
+    G_SIGNAL_RUN_LAST,
+    G_STRUCT_OFFSET (EventLogIface, event_log),
+    NULL,
+    NULL,
+    g_cclosure_marshal_generic,
+    G_TYPE_NONE,
+    1, G_TYPE_VARIANT);
+
+}
+
+/**
+ * event_log_emit_event_log:
+ * @object: A #EventLog.
+ * @arg_message: Argument to pass with the signal.
+ *
+ * Emits the <link linkend="gdbus-signal-org-openbmc-EventLog.EventLog">"EventLog"</link> D-Bus signal.
+ */
+void
+event_log_emit_event_log (
+    EventLog *object,
+    GVariant *arg_message)
+{
+  g_signal_emit_by_name (object, "event-log", arg_message);
+}
+
+/* ------------------------------------------------------------------------ */
+
+/**
+ * EventLogProxy:
+ *
+ * The #EventLogProxy structure contains only private data and should only be accessed using the provided API.
+ */
+
+/**
+ * EventLogProxyClass:
+ * @parent_class: The parent class.
+ *
+ * Class structure for #EventLogProxy.
+ */
+
+struct _EventLogProxyPrivate
+{
+  GData *qdata;
+};
+
+static void event_log_proxy_iface_init (EventLogIface *iface);
+
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+G_DEFINE_TYPE_WITH_CODE (EventLogProxy, event_log_proxy, G_TYPE_DBUS_PROXY,
+                         G_ADD_PRIVATE (EventLogProxy)
+                         G_IMPLEMENT_INTERFACE (TYPE_EVENT_LOG, event_log_proxy_iface_init));
+
+#else
+G_DEFINE_TYPE_WITH_CODE (EventLogProxy, event_log_proxy, G_TYPE_DBUS_PROXY,
+                         G_IMPLEMENT_INTERFACE (TYPE_EVENT_LOG, event_log_proxy_iface_init));
+
+#endif
+static void
+event_log_proxy_finalize (GObject *object)
+{
+  EventLogProxy *proxy = EVENT_LOG_PROXY (object);
+  g_datalist_clear (&proxy->priv->qdata);
+  G_OBJECT_CLASS (event_log_proxy_parent_class)->finalize (object);
+}
+
+static void
+event_log_proxy_get_property (GObject      *object,
+  guint         prop_id,
+  GValue       *value,
+  GParamSpec   *pspec G_GNUC_UNUSED)
+{
+}
+
+static void
+event_log_proxy_set_property (GObject      *object,
+  guint         prop_id,
+  const GValue *value,
+  GParamSpec   *pspec G_GNUC_UNUSED)
+{
+}
+
+static void
+event_log_proxy_g_signal (GDBusProxy *proxy,
+  const gchar *sender_name G_GNUC_UNUSED,
+  const gchar *signal_name,
+  GVariant *parameters)
+{
+  _ExtendedGDBusSignalInfo *info;
+  GVariantIter iter;
+  GVariant *child;
+  GValue *paramv;
+  guint num_params;
+  guint n;
+  guint signal_id;
+  info = (_ExtendedGDBusSignalInfo *) g_dbus_interface_info_lookup_signal ((GDBusInterfaceInfo *) &_event_log_interface_info.parent_struct, signal_name);
+  if (info == NULL)
+    return;
+  num_params = g_variant_n_children (parameters);
+  paramv = g_new0 (GValue, num_params + 1);
+  g_value_init (&paramv[0], TYPE_EVENT_LOG);
+  g_value_set_object (&paramv[0], proxy);
+  g_variant_iter_init (&iter, parameters);
+  n = 1;
+  while ((child = g_variant_iter_next_value (&iter)) != NULL)
+    {
+      _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.args[n - 1];
+      if (arg_info->use_gvariant)
+        {
+          g_value_init (&paramv[n], G_TYPE_VARIANT);
+          g_value_set_variant (&paramv[n], child);
+          n++;
+        }
+      else
+        g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
+      g_variant_unref (child);
+    }
+  signal_id = g_signal_lookup (info->signal_name, TYPE_EVENT_LOG);
+  g_signal_emitv (paramv, signal_id, 0, NULL);
+  for (n = 0; n < num_params + 1; n++)
+    g_value_unset (&paramv[n]);
+  g_free (paramv);
+}
+
+static void
+event_log_proxy_g_properties_changed (GDBusProxy *_proxy,
+  GVariant *changed_properties,
+  const gchar *const *invalidated_properties)
+{
+  EventLogProxy *proxy = EVENT_LOG_PROXY (_proxy);
+  guint n;
+  const gchar *key;
+  GVariantIter *iter;
+  _ExtendedGDBusPropertyInfo *info;
+  g_variant_get (changed_properties, "a{sv}", &iter);
+  while (g_variant_iter_next (iter, "{&sv}", &key, NULL))
+    {
+      info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_event_log_interface_info.parent_struct, key);
+      g_datalist_remove_data (&proxy->priv->qdata, key);
+      if (info != NULL)
+        g_object_notify (G_OBJECT (proxy), info->hyphen_name);
+    }
+  g_variant_iter_free (iter);
+  for (n = 0; invalidated_properties[n] != NULL; n++)
+    {
+      info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_event_log_interface_info.parent_struct, invalidated_properties[n]);
+      g_datalist_remove_data (&proxy->priv->qdata, invalidated_properties[n]);
+      if (info != NULL)
+        g_object_notify (G_OBJECT (proxy), info->hyphen_name);
+    }
+}
+
+static void
+event_log_proxy_init (EventLogProxy *proxy)
+{
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+  proxy->priv = event_log_proxy_get_instance_private (proxy);
+#else
+  proxy->priv = G_TYPE_INSTANCE_GET_PRIVATE (proxy, TYPE_EVENT_LOG_PROXY, EventLogProxyPrivate);
+#endif
+
+  g_dbus_proxy_set_interface_info (G_DBUS_PROXY (proxy), event_log_interface_info ());
+}
+
+static void
+event_log_proxy_class_init (EventLogProxyClass *klass)
+{
+  GObjectClass *gobject_class;
+  GDBusProxyClass *proxy_class;
+
+  gobject_class = G_OBJECT_CLASS (klass);
+  gobject_class->finalize     = event_log_proxy_finalize;
+  gobject_class->get_property = event_log_proxy_get_property;
+  gobject_class->set_property = event_log_proxy_set_property;
+
+  proxy_class = G_DBUS_PROXY_CLASS (klass);
+  proxy_class->g_signal = event_log_proxy_g_signal;
+  proxy_class->g_properties_changed = event_log_proxy_g_properties_changed;
+
+#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
+  g_type_class_add_private (klass, sizeof (EventLogProxyPrivate));
+#endif
+}
+
+static void
+event_log_proxy_iface_init (EventLogIface *iface)
+{
+}
+
+/**
+ * event_log_proxy_new:
+ * @connection: A #GDBusConnection.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
+ * @user_data: User data to pass to @callback.
+ *
+ * Asynchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link>. See g_dbus_proxy_new() for more details.
+ *
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call event_log_proxy_new_finish() to get the result of the operation.
+ *
+ * See event_log_proxy_new_sync() for the synchronous, blocking version of this constructor.
+ */
+void
+event_log_proxy_new (
+    GDBusConnection     *connection,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GAsyncReadyCallback  callback,
+    gpointer             user_data)
+{
+  g_async_initable_new_async (TYPE_EVENT_LOG_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.EventLog", NULL);
+}
+
+/**
+ * event_log_proxy_new_finish:
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to event_log_proxy_new().
+ * @error: Return location for error or %NULL
+ *
+ * Finishes an operation started with event_log_proxy_new().
+ *
+ * Returns: (transfer full) (type EventLogProxy): The constructed proxy object or %NULL if @error is set.
+ */
+EventLog *
+event_log_proxy_new_finish (
+    GAsyncResult        *res,
+    GError             **error)
+{
+  GObject *ret;
+  GObject *source_object;
+  source_object = g_async_result_get_source_object (res);
+  ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
+  g_object_unref (source_object);
+  if (ret != NULL)
+    return EVENT_LOG (ret);
+  else
+    return NULL;
+}
+
+/**
+ * event_log_proxy_new_sync:
+ * @connection: A #GDBusConnection.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL
+ *
+ * Synchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link>. See g_dbus_proxy_new_sync() for more details.
+ *
+ * The calling thread is blocked until a reply is received.
+ *
+ * See event_log_proxy_new() for the asynchronous version of this constructor.
+ *
+ * Returns: (transfer full) (type EventLogProxy): The constructed proxy object or %NULL if @error is set.
+ */
+EventLog *
+event_log_proxy_new_sync (
+    GDBusConnection     *connection,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GError             **error)
+{
+  GInitable *ret;
+  ret = g_initable_new (TYPE_EVENT_LOG_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.EventLog", NULL);
+  if (ret != NULL)
+    return EVENT_LOG (ret);
+  else
+    return NULL;
+}
+
+
+/**
+ * event_log_proxy_new_for_bus:
+ * @bus_type: A #GBusType.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: A bus name (well-known or unique).
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
+ * @user_data: User data to pass to @callback.
+ *
+ * Like event_log_proxy_new() but takes a #GBusType instead of a #GDBusConnection.
+ *
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call event_log_proxy_new_for_bus_finish() to get the result of the operation.
+ *
+ * See event_log_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.
+ */
+void
+event_log_proxy_new_for_bus (
+    GBusType             bus_type,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GAsyncReadyCallback  callback,
+    gpointer             user_data)
+{
+  g_async_initable_new_async (TYPE_EVENT_LOG_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.EventLog", NULL);
+}
+
+/**
+ * event_log_proxy_new_for_bus_finish:
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to event_log_proxy_new_for_bus().
+ * @error: Return location for error or %NULL
+ *
+ * Finishes an operation started with event_log_proxy_new_for_bus().
+ *
+ * Returns: (transfer full) (type EventLogProxy): The constructed proxy object or %NULL if @error is set.
+ */
+EventLog *
+event_log_proxy_new_for_bus_finish (
+    GAsyncResult        *res,
+    GError             **error)
+{
+  GObject *ret;
+  GObject *source_object;
+  source_object = g_async_result_get_source_object (res);
+  ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
+  g_object_unref (source_object);
+  if (ret != NULL)
+    return EVENT_LOG (ret);
+  else
+    return NULL;
+}
+
+/**
+ * event_log_proxy_new_for_bus_sync:
+ * @bus_type: A #GBusType.
+ * @flags: Flags from the #GDBusProxyFlags enumeration.
+ * @name: A bus name (well-known or unique).
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL
+ *
+ * Like event_log_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection.
+ *
+ * The calling thread is blocked until a reply is received.
+ *
+ * See event_log_proxy_new_for_bus() for the asynchronous version of this constructor.
+ *
+ * Returns: (transfer full) (type EventLogProxy): The constructed proxy object or %NULL if @error is set.
+ */
+EventLog *
+event_log_proxy_new_for_bus_sync (
+    GBusType             bus_type,
+    GDBusProxyFlags      flags,
+    const gchar         *name,
+    const gchar         *object_path,
+    GCancellable        *cancellable,
+    GError             **error)
+{
+  GInitable *ret;
+  ret = g_initable_new (TYPE_EVENT_LOG_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.EventLog", NULL);
+  if (ret != NULL)
+    return EVENT_LOG (ret);
+  else
+    return NULL;
+}
+
+
+/* ------------------------------------------------------------------------ */
+
+/**
+ * EventLogSkeleton:
+ *
+ * The #EventLogSkeleton structure contains only private data and should only be accessed using the provided API.
+ */
+
+/**
+ * EventLogSkeletonClass:
+ * @parent_class: The parent class.
+ *
+ * Class structure for #EventLogSkeleton.
+ */
+
+struct _EventLogSkeletonPrivate
+{
+  GValue *properties;
+  GList *changed_properties;
+  GSource *changed_properties_idle_source;
+  GMainContext *context;
+  GMutex lock;
+};
+
+static void
+_event_log_skeleton_handle_method_call (
+  GDBusConnection *connection G_GNUC_UNUSED,
+  const gchar *sender G_GNUC_UNUSED,
+  const gchar *object_path G_GNUC_UNUSED,
+  const gchar *interface_name,
+  const gchar *method_name,
+  GVariant *parameters,
+  GDBusMethodInvocation *invocation,
+  gpointer user_data)
+{
+  EventLogSkeleton *skeleton = EVENT_LOG_SKELETON (user_data);
+  _ExtendedGDBusMethodInfo *info;
+  GVariantIter iter;
+  GVariant *child;
+  GValue *paramv;
+  guint num_params;
+  guint num_extra;
+  guint n;
+  guint signal_id;
+  GValue return_value = G_VALUE_INIT;
+  info = (_ExtendedGDBusMethodInfo *) g_dbus_method_invocation_get_method_info (invocation);
+  g_assert (info != NULL);
+  num_params = g_variant_n_children (parameters);
+  num_extra = info->pass_fdlist ? 3 : 2;  paramv = g_new0 (GValue, num_params + num_extra);
+  n = 0;
+  g_value_init (&paramv[n], TYPE_EVENT_LOG);
+  g_value_set_object (&paramv[n++], skeleton);
+  g_value_init (&paramv[n], G_TYPE_DBUS_METHOD_INVOCATION);
+  g_value_set_object (&paramv[n++], invocation);
+  if (info->pass_fdlist)
+    {
+#ifdef G_OS_UNIX
+      g_value_init (&paramv[n], G_TYPE_UNIX_FD_LIST);
+      g_value_set_object (&paramv[n++], g_dbus_message_get_unix_fd_list (g_dbus_method_invocation_get_message (invocation)));
+#else
+      g_assert_not_reached ();
+#endif
+    }
+  g_variant_iter_init (&iter, parameters);
+  while ((child = g_variant_iter_next_value (&iter)) != NULL)
+    {
+      _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.in_args[n - num_extra];
+      if (arg_info->use_gvariant)
+        {
+          g_value_init (&paramv[n], G_TYPE_VARIANT);
+          g_value_set_variant (&paramv[n], child);
+          n++;
+        }
+      else
+        g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
+      g_variant_unref (child);
+    }
+  signal_id = g_signal_lookup (info->signal_name, TYPE_EVENT_LOG);
+  g_value_init (&return_value, G_TYPE_BOOLEAN);
+  g_signal_emitv (paramv, signal_id, 0, &return_value);
+  if (!g_value_get_boolean (&return_value))
+    g_dbus_method_invocation_return_error (invocation, G_DBUS_ERROR, G_DBUS_ERROR_UNKNOWN_METHOD, "Method %s is not implemented on interface %s", method_name, interface_name);
+  g_value_unset (&return_value);
+  for (n = 0; n < num_params + num_extra; n++)
+    g_value_unset (&paramv[n]);
+  g_free (paramv);
+}
+
+static GVariant *
+_event_log_skeleton_handle_get_property (
+  GDBusConnection *connection G_GNUC_UNUSED,
+  const gchar *sender G_GNUC_UNUSED,
+  const gchar *object_path G_GNUC_UNUSED,
+  const gchar *interface_name G_GNUC_UNUSED,
+  const gchar *property_name,
+  GError **error,
+  gpointer user_data)
+{
+  EventLogSkeleton *skeleton = EVENT_LOG_SKELETON (user_data);
+  GValue value = G_VALUE_INIT;
+  GParamSpec *pspec;
+  _ExtendedGDBusPropertyInfo *info;
+  GVariant *ret;
+  ret = NULL;
+  info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_event_log_interface_info.parent_struct, property_name);
+  g_assert (info != NULL);
+  pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
+  if (pspec == NULL)
+    {
+      g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
+    }
+  else
+    {
+      g_value_init (&value, pspec->value_type);
+      g_object_get_property (G_OBJECT (skeleton), info->hyphen_name, &value);
+      ret = g_dbus_gvalue_to_gvariant (&value, G_VARIANT_TYPE (info->parent_struct.signature));
+      g_value_unset (&value);
+    }
+  return ret;
+}
+
+static gboolean
+_event_log_skeleton_handle_set_property (
+  GDBusConnection *connection G_GNUC_UNUSED,
+  const gchar *sender G_GNUC_UNUSED,
+  const gchar *object_path G_GNUC_UNUSED,
+  const gchar *interface_name G_GNUC_UNUSED,
+  const gchar *property_name,
+  GVariant *variant,
+  GError **error,
+  gpointer user_data)
+{
+  EventLogSkeleton *skeleton = EVENT_LOG_SKELETON (user_data);
+  GValue value = G_VALUE_INIT;
+  GParamSpec *pspec;
+  _ExtendedGDBusPropertyInfo *info;
+  gboolean ret;
+  ret = FALSE;
+  info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_event_log_interface_info.parent_struct, property_name);
+  g_assert (info != NULL);
+  pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
+  if (pspec == NULL)
+    {
+      g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
+    }
+  else
+    {
+      if (info->use_gvariant)
+        g_value_set_variant (&value, variant);
+      else
+        g_dbus_gvariant_to_gvalue (variant, &value);
+      g_object_set_property (G_OBJECT (skeleton), info->hyphen_name, &value);
+      g_value_unset (&value);
+      ret = TRUE;
+    }
+  return ret;
+}
+
+static const GDBusInterfaceVTable _event_log_skeleton_vtable =
+{
+  _event_log_skeleton_handle_method_call,
+  _event_log_skeleton_handle_get_property,
+  _event_log_skeleton_handle_set_property,
+  {NULL}
+};
+
+static GDBusInterfaceInfo *
+event_log_skeleton_dbus_interface_get_info (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
+{
+  return event_log_interface_info ();
+}
+
+static GDBusInterfaceVTable *
+event_log_skeleton_dbus_interface_get_vtable (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
+{
+  return (GDBusInterfaceVTable *) &_event_log_skeleton_vtable;
+}
+
+static GVariant *
+event_log_skeleton_dbus_interface_get_properties (GDBusInterfaceSkeleton *_skeleton)
+{
+  EventLogSkeleton *skeleton = EVENT_LOG_SKELETON (_skeleton);
+
+  GVariantBuilder builder;
+  guint n;
+  g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}"));
+  if (_event_log_interface_info.parent_struct.properties == NULL)
+    goto out;
+  for (n = 0; _event_log_interface_info.parent_struct.properties[n] != NULL; n++)
+    {
+      GDBusPropertyInfo *info = _event_log_interface_info.parent_struct.properties[n];
+      if (info->flags & G_DBUS_PROPERTY_INFO_FLAGS_READABLE)
+        {
+          GVariant *value;
+          value = _event_log_skeleton_handle_get_property (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)), NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.EventLog", info->name, NULL, skeleton);
+          if (value != NULL)
+            {
+              g_variant_take_ref (value);
+              g_variant_builder_add (&builder, "{sv}", info->name, value);
+              g_variant_unref (value);
+            }
+        }
+    }
+out:
+  return g_variant_builder_end (&builder);
+}
+
+static void
+event_log_skeleton_dbus_interface_flush (GDBusInterfaceSkeleton *_skeleton)
+{
+}
+
+static void
+_event_log_on_signal_event_log (
+    EventLog *object,
+    GVariant *arg_message)
+{
+  EventLogSkeleton *skeleton = EVENT_LOG_SKELETON (object);
+
+  GList      *connections, *l;
+  GVariant   *signal_variant;
+  connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton));
+
+  signal_variant = g_variant_ref_sink (g_variant_new ("(@a{ss})",
+                   arg_message));
+  for (l = connections; l != NULL; l = l->next)
+    {
+      GDBusConnection *connection = l->data;
+      g_dbus_connection_emit_signal (connection,
+        NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.EventLog", "EventLog",
+        signal_variant, NULL);
+    }
+  g_variant_unref (signal_variant);
+  g_list_free_full (connections, g_object_unref);
+}
+
+static void event_log_skeleton_iface_init (EventLogIface *iface);
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+G_DEFINE_TYPE_WITH_CODE (EventLogSkeleton, event_log_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
+                         G_ADD_PRIVATE (EventLogSkeleton)
+                         G_IMPLEMENT_INTERFACE (TYPE_EVENT_LOG, event_log_skeleton_iface_init));
+
+#else
+G_DEFINE_TYPE_WITH_CODE (EventLogSkeleton, event_log_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
+                         G_IMPLEMENT_INTERFACE (TYPE_EVENT_LOG, event_log_skeleton_iface_init));
+
+#endif
+static void
+event_log_skeleton_finalize (GObject *object)
+{
+  EventLogSkeleton *skeleton = EVENT_LOG_SKELETON (object);
+  g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free);
+  if (skeleton->priv->changed_properties_idle_source != NULL)
+    g_source_destroy (skeleton->priv->changed_properties_idle_source);
+  g_main_context_unref (skeleton->priv->context);
+  g_mutex_clear (&skeleton->priv->lock);
+  G_OBJECT_CLASS (event_log_skeleton_parent_class)->finalize (object);
+}
+
+static void
+event_log_skeleton_init (EventLogSkeleton *skeleton)
+{
+#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
+  skeleton->priv = event_log_skeleton_get_instance_private (skeleton);
+#else
+  skeleton->priv = G_TYPE_INSTANCE_GET_PRIVATE (skeleton, TYPE_EVENT_LOG_SKELETON, EventLogSkeletonPrivate);
+#endif
+
+  g_mutex_init (&skeleton->priv->lock);
+  skeleton->priv->context = g_main_context_ref_thread_default ();
+}
+
+static void
+event_log_skeleton_class_init (EventLogSkeletonClass *klass)
+{
+  GObjectClass *gobject_class;
+  GDBusInterfaceSkeletonClass *skeleton_class;
+
+  gobject_class = G_OBJECT_CLASS (klass);
+  gobject_class->finalize = event_log_skeleton_finalize;
+
+  skeleton_class = G_DBUS_INTERFACE_SKELETON_CLASS (klass);
+  skeleton_class->get_info = event_log_skeleton_dbus_interface_get_info;
+  skeleton_class->get_properties = event_log_skeleton_dbus_interface_get_properties;
+  skeleton_class->flush = event_log_skeleton_dbus_interface_flush;
+  skeleton_class->get_vtable = event_log_skeleton_dbus_interface_get_vtable;
+
+#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
+  g_type_class_add_private (klass, sizeof (EventLogSkeletonPrivate));
+#endif
+}
+
+static void
+event_log_skeleton_iface_init (EventLogIface *iface)
+{
+  iface->event_log = _event_log_on_signal_event_log;
+}
+
+/**
+ * event_log_skeleton_new:
+ *
+ * Creates a skeleton object for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link>.
+ *
+ * Returns: (transfer full) (type EventLogSkeleton): The skeleton object.
+ */
+EventLog *
+event_log_skeleton_new (void)
+{
+  return EVENT_LOG (g_object_new (TYPE_EVENT_LOG_SKELETON, NULL));
+}
+
+/* ------------------------------------------------------------------------
+ * Code for Object, ObjectProxy and ObjectSkeleton
+ * ------------------------------------------------------------------------
+ */
+
+/**
+ * SECTION:Object
+ * @title: Object
+ * @short_description: Specialized GDBusObject types
+ *
+ * This section contains the #Object, #ObjectProxy, and #ObjectSkeleton types which make it easier to work with objects implementing generated types for D-Bus interfaces.
+ */
+
+/**
+ * Object:
+ *
+ * The #Object type is a specialized container of interfaces.
+ */
+
+/**
+ * ObjectIface:
+ * @parent_iface: The parent interface.
+ *
+ * Virtual table for the #Object interface.
+ */
+
+typedef ObjectIface ObjectInterface;
+G_DEFINE_INTERFACE_WITH_CODE (Object, object, G_TYPE_OBJECT, g_type_interface_add_prerequisite (g_define_type_id, G_TYPE_DBUS_OBJECT));
+
+static void
+object_default_init (ObjectIface *iface)
+{
+  /**
+   * Object:control:
+   *
+   * The #Control instance corresponding to the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link>, if any.
+   *
+   * Connect to the #GObject::notify signal to get informed of property changes.
+   */
+  g_object_interface_install_property (iface, g_param_spec_object ("control", "control", "control", TYPE_CONTROL, G_PARAM_READWRITE|G_PARAM_STATIC_STRINGS));
+
+  /**
+   * Object:control-host:
+   *
+   * The #ControlHost instance corresponding to the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>, if any.
+   *
+   * Connect to the #GObject::notify signal to get informed of property changes.
+   */
+  g_object_interface_install_property (iface, g_param_spec_object ("control-host", "control-host", "control-host", TYPE_CONTROL_HOST, G_PARAM_READWRITE|G_PARAM_STATIC_STRINGS));
+
+  /**
+   * Object:control-power:
+   *
+   * The #ControlPower instance corresponding to the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link>, if any.
+   *
+   * Connect to the #GObject::notify signal to get informed of property changes.
+   */
+  g_object_interface_install_property (iface, g_param_spec_object ("control-power", "control-power", "control-power", TYPE_CONTROL_POWER, G_PARAM_READWRITE|G_PARAM_STATIC_STRINGS));
+
+  /**
+   * Object:event-log:
+   *
+   * The #EventLog instance corresponding to the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link>, if any.
+   *
+   * Connect to the #GObject::notify signal to get informed of property changes.
+   */
+  g_object_interface_install_property (iface, g_param_spec_object ("event-log", "event-log", "event-log", TYPE_EVENT_LOG, G_PARAM_READWRITE|G_PARAM_STATIC_STRINGS));
+
+}
+
+/**
+ * object_get_control:
+ * @object: A #Object.
+ *
+ * Gets the #Control instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link> on @object, if any.
+ *
+ * Returns: (transfer full): A #Control that must be freed with g_object_unref() or %NULL if @object does not implement the interface.
+ */
+Control *object_get_control (Object *object)
+{
+  GDBusInterface *ret;
+  ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.Control");
+  if (ret == NULL)
+    return NULL;
+  return CONTROL (ret);
+}
+
+/**
+ * object_get_control_host:
+ * @object: A #Object.
+ *
+ * Gets the #ControlHost instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link> on @object, if any.
+ *
+ * Returns: (transfer full): A #ControlHost that must be freed with g_object_unref() or %NULL if @object does not implement the interface.
+ */
+ControlHost *object_get_control_host (Object *object)
+{
+  GDBusInterface *ret;
+  ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Host");
+  if (ret == NULL)
+    return NULL;
+  return CONTROL_HOST (ret);
+}
+
+/**
+ * object_get_control_power:
+ * @object: A #Object.
+ *
+ * Gets the #ControlPower instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link> on @object, if any.
+ *
+ * Returns: (transfer full): A #ControlPower that must be freed with g_object_unref() or %NULL if @object does not implement the interface.
+ */
+ControlPower *object_get_control_power (Object *object)
+{
+  GDBusInterface *ret;
+  ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Power");
+  if (ret == NULL)
+    return NULL;
+  return CONTROL_POWER (ret);
+}
+
+/**
+ * object_get_event_log:
+ * @object: A #Object.
+ *
+ * Gets the #EventLog instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link> on @object, if any.
+ *
+ * Returns: (transfer full): A #EventLog that must be freed with g_object_unref() or %NULL if @object does not implement the interface.
+ */
+EventLog *object_get_event_log (Object *object)
+{
+  GDBusInterface *ret;
+  ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.EventLog");
+  if (ret == NULL)
+    return NULL;
+  return EVENT_LOG (ret);
+}
+
+
+/**
+ * object_peek_control: (skip)
+ * @object: A #Object.
+ *
+ * Like object_get_control() but doesn't increase the reference count on the returned object.
+ *
+ * <warning>It is not safe to use the returned object if you are on another thread than the one where the #GDBusObjectManagerClient or #GDBusObjectManagerServer for @object is running.</warning>
+ *
+ * Returns: (transfer none): A #Control or %NULL if @object does not implement the interface. Do not free the returned object, it is owned by @object.
+ */
+Control *object_peek_control (Object *object)
+{
+  GDBusInterface *ret;
+  ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.Control");
+  if (ret == NULL)
+    return NULL;
+  g_object_unref (ret);
+  return CONTROL (ret);
+}
+
+/**
+ * object_peek_control_host: (skip)
+ * @object: A #Object.
+ *
+ * Like object_get_control_host() but doesn't increase the reference count on the returned object.
+ *
+ * <warning>It is not safe to use the returned object if you are on another thread than the one where the #GDBusObjectManagerClient or #GDBusObjectManagerServer for @object is running.</warning>
+ *
+ * Returns: (transfer none): A #ControlHost or %NULL if @object does not implement the interface. Do not free the returned object, it is owned by @object.
+ */
+ControlHost *object_peek_control_host (Object *object)
+{
+  GDBusInterface *ret;
+  ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Host");
+  if (ret == NULL)
+    return NULL;
+  g_object_unref (ret);
+  return CONTROL_HOST (ret);
+}
+
+/**
+ * object_peek_control_power: (skip)
+ * @object: A #Object.
+ *
+ * Like object_get_control_power() but doesn't increase the reference count on the returned object.
+ *
+ * <warning>It is not safe to use the returned object if you are on another thread than the one where the #GDBusObjectManagerClient or #GDBusObjectManagerServer for @object is running.</warning>
+ *
+ * Returns: (transfer none): A #ControlPower or %NULL if @object does not implement the interface. Do not free the returned object, it is owned by @object.
+ */
+ControlPower *object_peek_control_power (Object *object)
+{
+  GDBusInterface *ret;
+  ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Power");
+  if (ret == NULL)
+    return NULL;
+  g_object_unref (ret);
+  return CONTROL_POWER (ret);
+}
+
+/**
+ * object_peek_event_log: (skip)
+ * @object: A #Object.
+ *
+ * Like object_get_event_log() but doesn't increase the reference count on the returned object.
+ *
+ * <warning>It is not safe to use the returned object if you are on another thread than the one where the #GDBusObjectManagerClient or #GDBusObjectManagerServer for @object is running.</warning>
+ *
+ * Returns: (transfer none): A #EventLog or %NULL if @object does not implement the interface. Do not free the returned object, it is owned by @object.
+ */
+EventLog *object_peek_event_log (Object *object)
+{
+  GDBusInterface *ret;
+  ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.EventLog");
+  if (ret == NULL)
+    return NULL;
+  g_object_unref (ret);
+  return EVENT_LOG (ret);
+}
+
+
+static void
+object_notify (GDBusObject *object, GDBusInterface *interface)
+{
+  _ExtendedGDBusInterfaceInfo *info = (_ExtendedGDBusInterfaceInfo *) g_dbus_interface_get_info (interface);
+  /* info can be NULL if the other end is using a D-Bus interface we don't know
+   * anything about, for example old generated code in this process talking to
+   * newer generated code in the other process. */
+  if (info != NULL)
+    g_object_notify (G_OBJECT (object), info->hyphen_name);
+}
+
+/**
+ * ObjectProxy:
+ *
+ * The #ObjectProxy structure contains only private data and should only be accessed using the provided API.
+ */
+
+/**
+ * ObjectProxyClass:
+ * @parent_class: The parent class.
+ *
+ * Class structure for #ObjectProxy.
+ */
+
+static void
+object_proxy__object_iface_init (ObjectIface *iface G_GNUC_UNUSED)
+{
+}
+
+static void
+object_proxy__g_dbus_object_iface_init (GDBusObjectIface *iface)
+{
+  iface->interface_added = object_notify;
+  iface->interface_removed = object_notify;
+}
+
+
+G_DEFINE_TYPE_WITH_CODE (ObjectProxy, object_proxy, G_TYPE_DBUS_OBJECT_PROXY,
+                         G_IMPLEMENT_INTERFACE (TYPE_OBJECT, object_proxy__object_iface_init)
+                         G_IMPLEMENT_INTERFACE (G_TYPE_DBUS_OBJECT, object_proxy__g_dbus_object_iface_init));
+
+static void
+object_proxy_init (ObjectProxy *object G_GNUC_UNUSED)
+{
+}
+
+static void
+object_proxy_set_property (GObject      *gobject,
+  guint         prop_id,
+  const GValue *value G_GNUC_UNUSED,
+  GParamSpec   *pspec)
+{
+  G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec);
+}
+
+static void
+object_proxy_get_property (GObject      *gobject,
+  guint         prop_id,
+  GValue       *value,
+  GParamSpec   *pspec)
+{
+  ObjectProxy *object = OBJECT_PROXY (gobject);
+  GDBusInterface *interface;
+
+  switch (prop_id)
+    {
+    case 1:
+      interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.Control");
+      g_value_take_object (value, interface);
+      break;
+
+    case 2:
+      interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Host");
+      g_value_take_object (value, interface);
+      break;
+
+    case 3:
+      interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Power");
+      g_value_take_object (value, interface);
+      break;
+
+    case 4:
+      interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.EventLog");
+      g_value_take_object (value, interface);
+      break;
+
+    default:
+      G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec);
+      break;
+  }
+}
+
+static void
+object_proxy_class_init (ObjectProxyClass *klass)
+{
+  GObjectClass *gobject_class = G_OBJECT_CLASS (klass);
+
+  gobject_class->set_property = object_proxy_set_property;
+  gobject_class->get_property = object_proxy_get_property;
+
+  g_object_class_override_property (gobject_class, 1, "control");
+  g_object_class_override_property (gobject_class, 2, "control-host");
+  g_object_class_override_property (gobject_class, 3, "control-power");
+  g_object_class_override_property (gobject_class, 4, "event-log");
+}
+
+/**
+ * object_proxy_new:
+ * @connection: A #GDBusConnection.
+ * @object_path: An object path.
+ *
+ * Creates a new proxy object.
+ *
+ * Returns: (transfer full): The proxy object.
+ */
+ObjectProxy *
+object_proxy_new (GDBusConnection *connection,
+  const gchar *object_path)
+{
+  g_return_val_if_fail (G_IS_DBUS_CONNECTION (connection), NULL);
+  g_return_val_if_fail (g_variant_is_object_path (object_path), NULL);
+  return OBJECT_PROXY (g_object_new (TYPE_OBJECT_PROXY, "g-connection", connection, "g-object-path", object_path, NULL));
+}
+
+/**
+ * ObjectSkeleton:
+ *
+ * The #ObjectSkeleton structure contains only private data and should only be accessed using the provided API.
+ */
+
+/**
+ * ObjectSkeletonClass:
+ * @parent_class: The parent class.
+ *
+ * Class structure for #ObjectSkeleton.
+ */
+
+static void
+object_skeleton__object_iface_init (ObjectIface *iface G_GNUC_UNUSED)
+{
+}
+
+
+static void
+object_skeleton__g_dbus_object_iface_init (GDBusObjectIface *iface)
+{
+  iface->interface_added = object_notify;
+  iface->interface_removed = object_notify;
+}
+
+G_DEFINE_TYPE_WITH_CODE (ObjectSkeleton, object_skeleton, G_TYPE_DBUS_OBJECT_SKELETON,
+                         G_IMPLEMENT_INTERFACE (TYPE_OBJECT, object_skeleton__object_iface_init)
+                         G_IMPLEMENT_INTERFACE (G_TYPE_DBUS_OBJECT, object_skeleton__g_dbus_object_iface_init));
+
+static void
+object_skeleton_init (ObjectSkeleton *object G_GNUC_UNUSED)
+{
+}
+
+static void
+object_skeleton_set_property (GObject      *gobject,
+  guint         prop_id,
+  const GValue *value,
+  GParamSpec   *pspec)
+{
+  ObjectSkeleton *object = OBJECT_SKELETON (gobject);
+  GDBusInterfaceSkeleton *interface;
+
+  switch (prop_id)
+    {
+    case 1:
+      interface = g_value_get_object (value);
+      if (interface != NULL)
+        {
+          g_warn_if_fail (IS_CONTROL (interface));
+          g_dbus_object_skeleton_add_interface (G_DBUS_OBJECT_SKELETON (object), interface);
+        }
+      else
+        {
+          g_dbus_object_skeleton_remove_interface_by_name (G_DBUS_OBJECT_SKELETON (object), "org.openbmc.Control");
+        }
+      break;
+
+    case 2:
+      interface = g_value_get_object (value);
+      if (interface != NULL)
+        {
+          g_warn_if_fail (IS_CONTROL_HOST (interface));
+          g_dbus_object_skeleton_add_interface (G_DBUS_OBJECT_SKELETON (object), interface);
+        }
+      else
+        {
+          g_dbus_object_skeleton_remove_interface_by_name (G_DBUS_OBJECT_SKELETON (object), "org.openbmc.control.Host");
+        }
+      break;
+
+    case 3:
+      interface = g_value_get_object (value);
+      if (interface != NULL)
+        {
+          g_warn_if_fail (IS_CONTROL_POWER (interface));
+          g_dbus_object_skeleton_add_interface (G_DBUS_OBJECT_SKELETON (object), interface);
+        }
+      else
+        {
+          g_dbus_object_skeleton_remove_interface_by_name (G_DBUS_OBJECT_SKELETON (object), "org.openbmc.control.Power");
+        }
+      break;
+
+    case 4:
+      interface = g_value_get_object (value);
+      if (interface != NULL)
+        {
+          g_warn_if_fail (IS_EVENT_LOG (interface));
+          g_dbus_object_skeleton_add_interface (G_DBUS_OBJECT_SKELETON (object), interface);
+        }
+      else
+        {
+          g_dbus_object_skeleton_remove_interface_by_name (G_DBUS_OBJECT_SKELETON (object), "org.openbmc.EventLog");
+        }
+      break;
+
+    default:
+      G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec);
+      break;
+  }
+}
+
+static void
+object_skeleton_get_property (GObject      *gobject,
+  guint         prop_id,
+  GValue       *value,
+  GParamSpec   *pspec)
+{
+  ObjectSkeleton *object = OBJECT_SKELETON (gobject);
+  GDBusInterface *interface;
+
+  switch (prop_id)
+    {
+    case 1:
+      interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.Control");
+      g_value_take_object (value, interface);
+      break;
+
+    case 2:
+      interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Host");
+      g_value_take_object (value, interface);
+      break;
+
+    case 3:
+      interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Power");
+      g_value_take_object (value, interface);
+      break;
+
+    case 4:
+      interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.EventLog");
+      g_value_take_object (value, interface);
+      break;
+
+    default:
+      G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec);
+      break;
+  }
+}
+
+static void
+object_skeleton_class_init (ObjectSkeletonClass *klass)
+{
+  GObjectClass *gobject_class = G_OBJECT_CLASS (klass);
+
+  gobject_class->set_property = object_skeleton_set_property;
+  gobject_class->get_property = object_skeleton_get_property;
+
+  g_object_class_override_property (gobject_class, 1, "control");
+  g_object_class_override_property (gobject_class, 2, "control-host");
+  g_object_class_override_property (gobject_class, 3, "control-power");
+  g_object_class_override_property (gobject_class, 4, "event-log");
+}
+
+/**
+ * object_skeleton_new:
+ * @object_path: An object path.
+ *
+ * Creates a new skeleton object.
+ *
+ * Returns: (transfer full): The skeleton object.
+ */
+ObjectSkeleton *
+object_skeleton_new (const gchar *object_path)
+{
+  g_return_val_if_fail (g_variant_is_object_path (object_path), NULL);
+  return OBJECT_SKELETON (g_object_new (TYPE_OBJECT_SKELETON, "g-object-path", object_path, NULL));
+}
+
+/**
+ * object_skeleton_set_control:
+ * @object: A #ObjectSkeleton.
+ * @interface_: (allow-none): A #Control or %NULL to clear the interface.
+ *
+ * Sets the #Control instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link> on @object.
+ */
+void object_skeleton_set_control (ObjectSkeleton *object, Control *interface_)
+{
+  g_object_set (G_OBJECT (object), "control", interface_, NULL);
+}
+
+/**
+ * object_skeleton_set_control_host:
+ * @object: A #ObjectSkeleton.
+ * @interface_: (allow-none): A #ControlHost or %NULL to clear the interface.
+ *
+ * Sets the #ControlHost instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link> on @object.
+ */
+void object_skeleton_set_control_host (ObjectSkeleton *object, ControlHost *interface_)
+{
+  g_object_set (G_OBJECT (object), "control-host", interface_, NULL);
+}
+
+/**
+ * object_skeleton_set_control_power:
+ * @object: A #ObjectSkeleton.
+ * @interface_: (allow-none): A #ControlPower or %NULL to clear the interface.
+ *
+ * Sets the #ControlPower instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link> on @object.
+ */
+void object_skeleton_set_control_power (ObjectSkeleton *object, ControlPower *interface_)
+{
+  g_object_set (G_OBJECT (object), "control-power", interface_, NULL);
+}
+
+/**
+ * object_skeleton_set_event_log:
+ * @object: A #ObjectSkeleton.
+ * @interface_: (allow-none): A #EventLog or %NULL to clear the interface.
+ *
+ * Sets the #EventLog instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link> on @object.
+ */
+void object_skeleton_set_event_log (ObjectSkeleton *object, EventLog *interface_)
+{
+  g_object_set (G_OBJECT (object), "event-log", interface_, NULL);
+}
+
+
+/* ------------------------------------------------------------------------
+ * Code for ObjectManager client
+ * ------------------------------------------------------------------------
+ */
+
+/**
+ * SECTION:ObjectManagerClient
+ * @title: ObjectManagerClient
+ * @short_description: Generated GDBusObjectManagerClient type
+ *
+ * This section contains a #GDBusObjectManagerClient that uses object_manager_client_get_proxy_type() as the #GDBusProxyTypeFunc.
+ */
+
+/**
+ * ObjectManagerClient:
+ *
+ * The #ObjectManagerClient structure contains only private data and should only be accessed using the provided API.
+ */
+
+/**
+ * ObjectManagerClientClass:
+ * @parent_class: The parent class.
+ *
+ * Class structure for #ObjectManagerClient.
+ */
+
+G_DEFINE_TYPE (ObjectManagerClient, object_manager_client, G_TYPE_DBUS_OBJECT_MANAGER_CLIENT);
+
+static void
+object_manager_client_init (ObjectManagerClient *manager G_GNUC_UNUSED)
+{
+}
+
+static void
+object_manager_client_class_init (ObjectManagerClientClass *klass G_GNUC_UNUSED)
+{
+}
+
+/**
+ * object_manager_client_get_proxy_type:
+ * @manager: A #GDBusObjectManagerClient.
+ * @object_path: The object path of the remote object (unused).
+ * @interface_name: (allow-none): Interface name of the remote object or %NULL to get the object proxy #GType.
+ * @user_data: User data (unused).
+ *
+ * A #GDBusProxyTypeFunc that maps @interface_name to the generated #GDBusObjectProxy<!-- -->- and #GDBusProxy<!-- -->-derived types.
+ *
+ * Returns: A #GDBusProxy<!-- -->-derived #GType if @interface_name is not %NULL, otherwise the #GType for #ObjectProxy.
+ */
+GType
+object_manager_client_get_proxy_type (GDBusObjectManagerClient *manager G_GNUC_UNUSED, const gchar *object_path G_GNUC_UNUSED, const gchar *interface_name, gpointer user_data G_GNUC_UNUSED)
+{
+  static gsize once_init_value = 0;
+  static GHashTable *lookup_hash;
+  GType ret;
+
+  if (interface_name == NULL)
+    return TYPE_OBJECT_PROXY;
+  if (g_once_init_enter (&once_init_value))
+    {
+      lookup_hash = g_hash_table_new (g_str_hash, g_str_equal);
+      g_hash_table_insert (lookup_hash, (gpointer) "org.openbmc.Control", GSIZE_TO_POINTER (TYPE_CONTROL_PROXY));
+      g_hash_table_insert (lookup_hash, (gpointer) "org.openbmc.control.Host", GSIZE_TO_POINTER (TYPE_CONTROL_HOST_PROXY));
+      g_hash_table_insert (lookup_hash, (gpointer) "org.openbmc.control.Power", GSIZE_TO_POINTER (TYPE_CONTROL_POWER_PROXY));
+      g_hash_table_insert (lookup_hash, (gpointer) "org.openbmc.EventLog", GSIZE_TO_POINTER (TYPE_EVENT_LOG_PROXY));
+      g_once_init_leave (&once_init_value, 1);
+    }
+  ret = (GType) GPOINTER_TO_SIZE (g_hash_table_lookup (lookup_hash, interface_name));
+  if (ret == (GType) 0)
+    ret = G_TYPE_DBUS_PROXY;
+  return ret;
+}
+
+/**
+ * object_manager_client_new:
+ * @connection: A #GDBusConnection.
+ * @flags: Flags from the #GDBusObjectManagerClientFlags enumeration.
+ * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
+ * @user_data: User data to pass to @callback.
+ *
+ * Asynchronously creates #GDBusObjectManagerClient using object_manager_client_get_proxy_type() as the #GDBusProxyTypeFunc. See g_dbus_object_manager_client_new() for more details.
+ *
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call object_manager_client_new_finish() to get the result of the operation.
+ *
+ * See object_manager_client_new_sync() for the synchronous, blocking version of this constructor.
+ */
+void
+object_manager_client_new (
+    GDBusConnection        *connection,
+    GDBusObjectManagerClientFlags  flags,
+    const gchar            *name,
+    const gchar            *object_path,
+    GCancellable           *cancellable,
+    GAsyncReadyCallback     callback,
+    gpointer                user_data)
+{
+  g_async_initable_new_async (TYPE_OBJECT_MANAGER_CLIENT, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "flags", flags, "name", name, "connection", connection, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL);
+}
+
+/**
+ * object_manager_client_new_finish:
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to object_manager_client_new().
+ * @error: Return location for error or %NULL
+ *
+ * Finishes an operation started with object_manager_client_new().
+ *
+ * Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set.
+ */
+GDBusObjectManager *
+object_manager_client_new_finish (
+    GAsyncResult        *res,
+    GError             **error)
+{
+  GObject *ret;
+  GObject *source_object;
+  source_object = g_async_result_get_source_object (res);
+  ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
+  g_object_unref (source_object);
+  if (ret != NULL)
+    return G_DBUS_OBJECT_MANAGER (ret);
+  else
+    return NULL;
+}
+
+/**
+ * object_manager_client_new_sync:
+ * @connection: A #GDBusConnection.
+ * @flags: Flags from the #GDBusObjectManagerClientFlags enumeration.
+ * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL
+ *
+ * Synchronously creates #GDBusObjectManagerClient using object_manager_client_get_proxy_type() as the #GDBusProxyTypeFunc. See g_dbus_object_manager_client_new_sync() for more details.
+ *
+ * The calling thread is blocked until a reply is received.
+ *
+ * See object_manager_client_new() for the asynchronous version of this constructor.
+ *
+ * Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set.
+ */
+GDBusObjectManager *
+object_manager_client_new_sync (
+    GDBusConnection        *connection,
+    GDBusObjectManagerClientFlags  flags,
+    const gchar            *name,
+    const gchar            *object_path,
+    GCancellable           *cancellable,
+    GError                **error)
+{
+  GInitable *ret;
+  ret = g_initable_new (TYPE_OBJECT_MANAGER_CLIENT, cancellable, error, "flags", flags, "name", name, "connection", connection, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL);
+  if (ret != NULL)
+    return G_DBUS_OBJECT_MANAGER (ret);
+  else
+    return NULL;
+}
+
+
+/**
+ * object_manager_client_new_for_bus:
+ * @bus_type: A #GBusType.
+ * @flags: Flags from the #GDBusObjectManagerClientFlags enumeration.
+ * @name: A bus name (well-known or unique).
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
+ * @user_data: User data to pass to @callback.
+ *
+ * Like object_manager_client_new() but takes a #GBusType instead of a #GDBusConnection.
+ *
+ * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
+ * You can then call object_manager_client_new_for_bus_finish() to get the result of the operation.
+ *
+ * See object_manager_client_new_for_bus_sync() for the synchronous, blocking version of this constructor.
+ */
+void
+object_manager_client_new_for_bus (
+    GBusType                bus_type,
+    GDBusObjectManagerClientFlags  flags,
+    const gchar            *name,
+    const gchar            *object_path,
+    GCancellable           *cancellable,
+    GAsyncReadyCallback     callback,
+    gpointer                user_data)
+{
+  g_async_initable_new_async (TYPE_OBJECT_MANAGER_CLIENT, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "flags", flags, "name", name, "bus-type", bus_type, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL);
+}
+
+/**
+ * object_manager_client_new_for_bus_finish:
+ * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to object_manager_client_new_for_bus().
+ * @error: Return location for error or %NULL
+ *
+ * Finishes an operation started with object_manager_client_new_for_bus().
+ *
+ * Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set.
+ */
+GDBusObjectManager *
+object_manager_client_new_for_bus_finish (
+    GAsyncResult        *res,
+    GError             **error)
+{
+  GObject *ret;
+  GObject *source_object;
+  source_object = g_async_result_get_source_object (res);
+  ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
+  g_object_unref (source_object);
+  if (ret != NULL)
+    return G_DBUS_OBJECT_MANAGER (ret);
+  else
+    return NULL;
+}
+
+/**
+ * object_manager_client_new_for_bus_sync:
+ * @bus_type: A #GBusType.
+ * @flags: Flags from the #GDBusObjectManagerClientFlags enumeration.
+ * @name: A bus name (well-known or unique).
+ * @object_path: An object path.
+ * @cancellable: (allow-none): A #GCancellable or %NULL.
+ * @error: Return location for error or %NULL
+ *
+ * Like object_manager_client_new_sync() but takes a #GBusType instead of a #GDBusConnection.
+ *
+ * The calling thread is blocked until a reply is received.
+ *
+ * See object_manager_client_new_for_bus() for the asynchronous version of this constructor.
+ *
+ * Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set.
+ */
+GDBusObjectManager *
+object_manager_client_new_for_bus_sync (
+    GBusType                bus_type,
+    GDBusObjectManagerClientFlags  flags,
+    const gchar            *name,
+    const gchar            *object_path,
+    GCancellable           *cancellable,
+    GError                **error)
+{
+  GInitable *ret;
+  ret = g_initable_new (TYPE_OBJECT_MANAGER_CLIENT, cancellable, error, "flags", flags, "name", name, "bus-type", bus_type, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL);
+  if (ret != NULL)
+    return G_DBUS_OBJECT_MANAGER (ret);
+  else
+    return NULL;
+}
+
+