diff --git a/objects/control_bmc_barreleye.c b/objects/control_bmc_barreleye.c
new file mode 100644
index 0000000..0e6c5cb
--- /dev/null
+++ b/objects/control_bmc_barreleye.c
@@ -0,0 +1,213 @@
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+#include "interfaces/openbmc_intf.h"
+#include "openbmc.h"
+#include "gpio.h"
+
+/* ---------------------------------------------------------------------------------------------------- */
+static const gchar* dbus_object_path = "/org/openbmc/control";
+static const gchar* dbus_name        = "org.openbmc.control.Bmc";
+
+//this probably should come from some global SOC config
+
+#define LPC_BASE		(off_t)0x1e789000
+#define LPC_HICR6		0x80
+#define LPC_HICR7		0x88
+#define LPC_HICR8		0x8c
+#define SPI_BASE		(off_t)0x1e630000
+#define SCU_BASE                (off_t)0x1e780000
+#define UART_BASE               (off_t)0x1e783000
+#define UART_BASE2              (off_t)0x1e785000
+#define COM_BASE                (off_t)0x1e789000
+#define COM_BASE2               (off_t)0x1e789100
+#define GPIO_BASE		(off_t)0x1e6e2000
+
+static GDBusObjectManagerServer *manager = NULL;
+
+void* memmap(int mem_fd,off_t base)
+{
+	void* bmcreg;
+	bmcreg = mmap(NULL, getpagesize(),
+			PROT_READ | PROT_WRITE, MAP_SHARED, mem_fd, base);
+
+	if (bmcreg == MAP_FAILED) {
+		printf("ERROR: Unable to map LPC register memory");
+		exit(1);
+	}
+	return bmcreg;
+}
+
+void reg_init()
+{
+	g_print("BMC init\n");
+	// BMC init done here
+
+	void *bmcreg;
+	int mem_fd = open("/dev/mem", O_RDWR | O_SYNC);
+	if (mem_fd < 0) {
+		printf("ERROR: Unable to open /dev/mem");
+		exit(1);
+	}
+
+	bmcreg = memmap(mem_fd,LPC_BASE);
+	devmem(bmcreg+LPC_HICR6,0x00000500); //Enable LPC FWH cycles, Enable LPC to AHB bridge
+	devmem(bmcreg+LPC_HICR7,0x30000E00); //32M PNOR
+	devmem(bmcreg+LPC_HICR8,0xFC0003FF);
+
+	//flash controller
+	bmcreg = memmap(mem_fd,SPI_BASE);
+	devmem(bmcreg+0x00,0x00000003);
+	devmem(bmcreg+0x04,0x00002404);
+
+	//UART
+
+	
+	bmcreg = memmap(mem_fd,UART_BASE);
+	devmem(bmcreg+0x00,0x00000000);  //Set Baud rate divisor -> 13 (Baud 115200)
+	devmem(bmcreg+0x04,0x00000000);  //Set Baud rate divisor -> 13 (Baud 115200)
+	devmem(bmcreg+0x08,0x000000c1);  //Disable Parity, 1 stop bit, 8 bits
+
+	bmcreg = memmap(mem_fd,UART_BASE2);
+	devmem(bmcreg+0x0c,0x00000000);
+	devmem(bmcreg+0x2c,0x00000000);
+
+	bmcreg = memmap(mem_fd,COM_BASE);
+	devmem(bmcreg+0x9C,0x08060000);  //Set UART routing
+
+	bmcreg = memmap(mem_fd,SCU_BASE);
+	devmem(bmcreg+0x00,0x9f82fce7);
+	devmem(bmcreg+0x04,0x0370e677);
+	devmem(bmcreg+0x20,0xcfc8f7ff);
+	devmem(bmcreg+0x24,0xc738f20a);
+	devmem(bmcreg+0x80,0x0031ffaf);
+
+
+	//GPIO
+	bmcreg = memmap(mem_fd,GPIO_BASE);
+	devmem(bmcreg+0x84,0x00fff0c0);  //Enable UART1
+	devmem(bmcreg+0x70,0x120CE406);
+	devmem(bmcreg+0x80,0xCB000000);
+	devmem(bmcreg+0x88,0x01C000FF);
+	devmem(bmcreg+0x8c,0xC1C000FF);
+	devmem(bmcreg+0x90,0x003FA009);
+	devmem(bmcreg+0x88,0x01C0007F);
+
+
+	bmcreg = memmap(mem_fd,COM_BASE);
+	devmem(bmcreg+0x170,0x00000042);
+	devmem(bmcreg+0x174,0x00004000);
+
+
+	close(mem_fd);
+}
+
+static gboolean
+on_init (Control          *control,
+         GDBusMethodInvocation  *invocation,
+         gpointer                user_data)
+{
+	#ifdef __arm__
+	reg_init();
+	#endif
+	control_complete_init(control,invocation);
+	control_emit_goto_system_state(control,"BMC_STARTING");
+	
+	return TRUE;
+}
+
+static void 
+on_bus_acquired (GDBusConnection *connection,
+                 const gchar     *name,
+                 gpointer         user_data)
+{
+	ObjectSkeleton *object;
+ 	cmdline *cmd = user_data;
+	if (cmd->argc < 2)
+	{
+		g_print("No objects created.  Put object name(s) on command line\n");
+		return;
+	}	
+  	manager = g_dbus_object_manager_server_new (dbus_object_path);
+  	int i=0;
+  	for (i=1;i<cmd->argc;i++)
+  	{
+		gchar *s;
+  		s = g_strdup_printf ("%s/%s",dbus_object_path,cmd->argv[i]);
+  		object = object_skeleton_new (s);
+  		g_free (s);
+
+		ControlBmc* control_bmc = control_bmc_skeleton_new ();
+		object_skeleton_set_control_bmc (object, control_bmc);
+		g_object_unref (control_bmc);
+
+		Control* control = control_skeleton_new ();
+		object_skeleton_set_control (object, control);
+		g_object_unref (control);
+
+		//define method callbacks here
+		g_signal_connect (control,
+        	            "handle-init",
+                	    G_CALLBACK (on_init),
+                	    NULL); /* user_data */
+
+		/* Export the object (@manager takes its own reference to @object) */
+		g_dbus_object_manager_server_export (manager, G_DBUS_OBJECT_SKELETON (object));
+		g_object_unref (object);
+	}
+	/* Export all objects */
+	g_dbus_object_manager_server_set_connection (manager, connection);
+}
+
+static void
+on_name_acquired (GDBusConnection *connection,
+                  const gchar     *name,
+                  gpointer         user_data)
+{
+}
+
+static void
+on_name_lost (GDBusConnection *connection,
+              const gchar     *name,
+              gpointer         user_data)
+{
+}
+
+
+
+
+/*----------------------------------------------------------------*/
+/* Main Event Loop                                                */
+
+gint
+main (gint argc, gchar *argv[])
+{
+  GMainLoop *loop;
+  cmdline cmd;
+  cmd.argc = argc;
+  cmd.argv = argv;
+
+  guint id;
+  loop = g_main_loop_new (NULL, FALSE);
+
+  id = g_bus_own_name (DBUS_TYPE,
+                       dbus_name,
+                       G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT |
+                       G_BUS_NAME_OWNER_FLAGS_REPLACE,
+                       on_bus_acquired,
+                       on_name_acquired,
+                       on_name_lost,
+                       &cmd,
+                       NULL);
+
+  g_main_loop_run (loop);
+  
+  g_bus_unown_name (id);
+  g_main_loop_unref (loop);
+  return 0;
+}