Add logic to sync/preserve MAC and UUID
The MAC and UUID values are written in the VPD eeprom by the manufacturer.
These values are mirrored to u-boot. During BMC boot, check that the
values in the VPD eeprom and u-boot are the same. If they are different,
use the VPD eeprom value to update u-boot.
Exception is the MAC when it's been set by the admin to have a locally
administered address. In this case the MAC is not updated.
Updating the MAC takes effect immediately, updating the UUID requires a
BMC reboot.
Change-Id: Ied0f308ed06cd6a45bd618bbb307b2483c6b5b61
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
diff --git a/pyinventorymgr/sync_inventory_items.py b/pyinventorymgr/sync_inventory_items.py
new file mode 100644
index 0000000..e11c2e6
--- /dev/null
+++ b/pyinventorymgr/sync_inventory_items.py
@@ -0,0 +1,130 @@
+#!/usr/bin/python -u
+#
+# Copyright 2016 IBM Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+# implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+import sys
+import dbus
+import argparse
+import subprocess
+import obmc_system_config as System
+
+INV_DBUS_NAME = 'org.openbmc.Inventory'
+INV_INTF_NAME = 'org.openbmc.InventoryItem'
+NET_DBUS_NAME = 'org.openbmc.NetworkManager'
+NET_OBJ_NAME = '/org/openbmc/NetworkManager/Interface'
+CHS_DBUS_NAME = 'org.openbmc.control.Chassis'
+CHS_OBJ_NAME = '/org/openbmc/control/chassis0'
+PROP_INTF_NAME = 'org.freedesktop.DBus.Properties'
+
+FRUS = System.FRU_INSTANCES
+
+# IEEE 802 MAC address mask for locally administered.
+# This means the admin has set the MAC and is no longer
+# the unique number set by the device manufacturer.
+MAC_LOCALLY_ADMIN_MASK = 0x20000000000
+
+
+# Get the inventory dbus path based on the requested fru
+def get_inv_obj_path(fru_type, fru_name):
+ obj_path = ''
+ for f in FRUS.keys():
+ if (FRUS[f]['fru_type'] == fru_type and f.endswith(fru_name)):
+ obj_path = f.replace("<inventory_root>", System.INVENTORY_ROOT)
+ return obj_path
+
+
+# Get the inventory property value
+def get_inv_value(obj, prop_name):
+ value = ''
+ dbus_method = obj.get_dbus_method("Get", PROP_INTF_NAME)
+ value = dbus_method(INV_INTF_NAME, prop_name)
+ return value
+
+
+# Get the value of the mac on the system without ':' separators
+def get_sys_mac(obj):
+ sys_mac = ''
+ dbus_method = obj.get_dbus_method("GetHwAddress", NET_DBUS_NAME)
+ sys_mac = dbus_method("eth0")
+ sys_mac = sys_mac.replace(":", "")
+ return sys_mac
+
+
+# Replace the value of the system mac with the value of the inventory
+# MAC if the system MAC is not locally administered because this means
+# the system admin has purposely set the MAC
+def sync_mac(obj, inv_mac, sys_mac):
+ # Convert sys MAC to int to perform bitwise '&'
+ int_sys_mac = int(sys_mac, 16)
+ if not int_sys_mac & MAC_LOCALLY_ADMIN_MASK:
+ # Sys MAC is not locally administered, go replace it with inv value
+ # Add the ':' separators
+ mac_str = ':'.join([inv_mac[i]+inv_mac[i+1] for i in range(0, 12, 2)])
+ # The Set HW Method already has checking for mac format
+ dbus_method = obj.get_dbus_method("SetHwAddress", NET_DBUS_NAME)
+ dbus_method("eth0", mac_str)
+
+
+# Get sys uuid
+def get_sys_uuid(obj):
+ sys_uuid = ''
+ dbus_method = obj.get_dbus_method("Get", PROP_INTF_NAME)
+ sys_uuid = dbus_method(CHS_DBUS_NAME, "uuid")
+ return sys_uuid
+
+
+# Set sys uuid, this reboots the BMC for the value to take effect
+def set_sys_uuid(uuid):
+ rc = subprocess.call(["fw_setenv", "uuid", uuid])
+ if rc == 0:
+ print "Rebooting BMC to set uuid"
+ # TODO Uncomment once sync from u-boot to /etc/machine-id is in place
+ # Issue openbmc/openbmc#479
+ # rc = subprocess.call(["reboot"])
+ else:
+ print "Error setting uuid"
+
+if __name__ == '__main__':
+ arg = argparse.ArgumentParser()
+ arg.add_argument('-t')
+ arg.add_argument('-n')
+ arg.add_argument('-p')
+ arg.add_argument('-s')
+
+ opt = arg.parse_args()
+ fru_type = opt.t
+ fru_name = opt.n
+ prop_name = opt.p
+ sync_type = opt.s
+
+ bus = dbus.SystemBus()
+ inv_obj_path = get_inv_obj_path(fru_type, fru_name)
+ inv_obj = bus.get_object(INV_DBUS_NAME, inv_obj_path)
+ net_obj = bus.get_object(NET_DBUS_NAME, NET_OBJ_NAME)
+ chs_obj = bus.get_object(CHS_DBUS_NAME, CHS_OBJ_NAME)
+
+ # Get the value of the requested inventory property
+ inv_value = get_inv_value(inv_obj, prop_name)
+
+ if sync_type == "mac":
+ sys_mac = get_sys_mac(net_obj)
+ if inv_value != sys_mac:
+ sync_mac(net_obj, inv_value, sys_mac)
+ elif sync_type == "uuid":
+ sys_uuid = get_sys_uuid(chs_obj)
+ if inv_value != sys_uuid:
+ set_sys_uuid(inv_value)