pytools/obmcutil

#!/usr/bin/python

import sys
import dbus
import argparse

from dbus.mainloop.glib import DBusGMainLoop
import gobject
import os
import signal
import time
from subprocess import Popen

descriptors = {
    'power': {
        'bus_name': 'org.openbmc.control.Power',
        'object_name': '/org/openbmc/control/power0',
        'interface_name': 'org.openbmc.control.Power'
    },
    'chassison': {
        'bus_name': 'xyz.openbmc_project.State.Chassis',
        'object_name': '/xyz/openbmc_project/state/chassis0',
        'interface_name': 'xyz.openbmc_project.State.Chassis',
        'property': 'RequestedPowerTransition',
        'value': 'xyz.openbmc_project.State.Chassis.Transition.On',
        'monitor': 'obmc-chassis-poweron@0.target',
    },
    'chassisoff': {
        'bus_name': 'xyz.openbmc_project.State.Chassis',
        'object_name': '/xyz/openbmc_project/state/chassis0',
        'interface_name': 'xyz.openbmc_project.State.Chassis',
        'property': 'RequestedPowerTransition',
        'value': 'xyz.openbmc_project.State.Chassis.Transition.Off',
        'monitor': 'obmc-chassis-hard-poweroff@0.target',
    },
    'poweron': {
        'bus_name': 'xyz.openbmc_project.State.Host',
        'object_name': '/xyz/openbmc_project/state/host0',
        'interface_name': 'xyz.openbmc_project.State.Host',
        'property': 'RequestedHostTransition',
        'value': 'xyz.openbmc_project.State.Host.Transition.On',
        'monitor': 'obmc-host-start@0.target',
    },
    'poweroff': {
        'bus_name': 'xyz.openbmc_project.State.Host',
        'object_name': '/xyz/openbmc_project/state/host0',
        'interface_name': 'xyz.openbmc_project.State.Host',
        'property': 'RequestedHostTransition',
        'value': 'xyz.openbmc_project.State.Host.Transition.Off',
        'monitor': 'obmc-host-stop@0.target',
    },
    'bmcstate': {
        'bus_name': 'xyz.openbmc_project.State.BMC',
        'object_name': '/xyz/openbmc_project/state/bmc0',
        'interface_name': 'xyz.openbmc_project.State.BMC',
        'property': 'CurrentBMCState',
    },
    'chassisstate': {
        'bus_name': 'xyz.openbmc_project.State.Chassis',
        'object_name': '/xyz/openbmc_project/state/chassis0',
        'interface_name': 'xyz.openbmc_project.State.Chassis',
        'property': 'CurrentPowerState',
    },
    'hoststate': {
        'bus_name': 'xyz.openbmc_project.State.Host',
        'object_name': '/xyz/openbmc_project/state/host0',
        'interface_name': 'xyz.openbmc_project.State.Host',
        'property': 'CurrentHostState',
    },
    'bootprogress': {
        'bus_name': 'xyz.openbmc_project.State.Host',
        'object_name': '/xyz/openbmc_project/state/host0',
        'interface_name': 'xyz.openbmc_project.State.Boot.Progress',
        'property': 'BootProgress',
    },
    'state' : ['bmcstate', 'chassisstate', 'hoststate']
}

def run_set_property(dbus_bus, dbus_iface, descriptor, args):
    mainloop = gobject.MainLoop()

    iface = descriptor['interface_name']
    prop = descriptor['property']

    if 'monitor' not in descriptor:
        dbus_iface.Set(iface, prop, descriptor['value'])
        return True

    def property_listener(job, path, unit, state):
        if descriptor['monitor'] != unit:
            return

        property_listener.success = (state == 'done')
        mainloop.quit()

    property_listener.success = True

    if args.wait and args.verbose:
        pid = Popen(["/bin/journalctl", "-f", "--no-pager"]).pid

    if args.wait:
        sig_match = dbus_bus.add_signal_receiver(property_listener, "JobRemoved")

    dbus_iface.Set(iface, prop, descriptor['value'])

    if args.wait:
        mainloop.run()
        sig_match.remove()

    if args.wait and args.verbose:
        # wait some time for the journal output
        time.sleep(args.wait_tune)
        os.kill(pid, signal.SIGTERM)

    return property_listener.success

def run_one_command(dbus_bus, descriptor, args):
    bus = descriptor['bus_name']
    obj = descriptor['object_name']
    iface = descriptor['interface_name']
    dbus_obj = dbus_bus.get_object(bus, obj)
    result = None

    if descriptor.has_key('property'):
        dbus_iface = dbus.Interface(dbus_obj, "org.freedesktop.DBus.Properties")
        if descriptor.has_key('value'):
            result = run_set_property(dbus_bus, dbus_iface, descriptor, args)
        else:
            prop = descriptor['property']
            dbus_prop = dbus_iface.Get(iface, prop)
            print '{:<20}: {}'.format(prop, str(dbus_prop))
            result = True
    else:
        dbus_iface = dbus.Interface(dbus_obj, "org.freedesktop.DBus.Properties")
        props = dbus_iface.GetAll(iface)
        for p in props:
            print "{} = {}".format(p, str(props[p]))
        result = True

    return result

def run_all_commands(dbus_bus, recipe, args):
    if isinstance(recipe, dict):
        return run_one_command(dbus_bus, recipe, args)

    assert isinstance(recipe, list)
    for command in recipe:
        descriptor = descriptors[command]
        if not run_one_command(dbus_bus, descriptor, args):
            print "Failed to execute command: {}".format(descriptor)
            return False

    return True

def main():
    dbus.mainloop.glib.DBusGMainLoop(set_as_default=True)

    parser = argparse.ArgumentParser()
    parser.add_argument('--verbose', '-v', action='store_true',
            help="Verbose output")
    parser.add_argument('--wait', '-w', action='store_true',
            help='Block until the state transition succeeds or fails')
    parser.add_argument('--wait-tune', '-t', nargs='?', default=8, type=float,
            # help='Seconds to wait for journal output to complete after receiving DBus signal',
            help=argparse.SUPPRESS)
    parser.add_argument('recipe', choices=sorted(descriptors.keys()))
    args = parser.parse_args()

    dbus_bus = dbus.SystemBus()
    try:
        return run_all_commands(dbus_bus, descriptors[args.recipe], args)
    finally:
        dbus_bus.close()

if __name__ == "__main__":
    sys.exit(0 if main() else 1)