Update single file firmware upload page
These updates are visible with IBM dotenv variables. Updates
include changes to layout and verbiage.
- Added a global application refresh listener, so app refresh
can be called from components outside of the application header
Signed-off-by: Yoshie Muranaka <yoshiemuranaka@gmail.com>
Change-Id: I5ebe6452a0360b6cced5597b648cde33e97c5a1f
diff --git a/src/locales/en-US.json b/src/locales/en-US.json
index a4af709..d3b6d75 100644
--- a/src/locales/en-US.json
+++ b/src/locales/en-US.json
@@ -13,6 +13,7 @@
"enable": "Enable",
"export": "Export",
"filter": "Filter",
+ "refresh": "Refresh",
"replace": "Replace",
"save": "Save",
"saveSettings": "Save settings",
@@ -261,29 +262,19 @@
},
"pageFirmware": {
"backup": "Backup:",
- "backupImage": "Backup image",
"bmcStatus": "BMC status",
- "changeAndRebootBmc": "Change image and reboot BMC",
- "changeToBackupImage": "Change to backup image",
"current": "Current:",
"firmwareOnBmc": "Firmware on BMC",
"firmwareOnHost": "Firmware on host",
- "firmwareOnSystem": "Firmware on system",
"hostStatus": "Host status",
"makeCurrentVersion": "Make current version",
"pageDescription": "Update firmware by uploading a BMC or Host image file from your workstation or TFTP server",
- "pageDescriptionSingleImage": "Update firmware by uploading a system image file from your workstation or TFTP server",
"running": "Running",
"state": "State",
"updateCode": "Update code",
"alert": {
- "operationInProgress": "Server power operation in progress.",
- "serverShutdownRequiredBeforeUpdate": "Server shutdown required before update",
- "serverShutdownRequiredInfo": "Shutdown will be orderly - OS will shutdown before the server shuts down.",
- "shutDownServer": "Shut down server",
"updateProcess": "Update process",
- "updateProcessInfo": "The new image will be uploaded and activated. After that, the BMC or host will reboot automatically to run from the new image.",
- "updateProcessInfoSingleImage": "The new image will be uploaded and activated. After that, the BMC will reboot automatically to run from the new image."
+ "updateProcessInfo": "The new image will be uploaded and activated. After that, the BMC or host will reboot automatically to run from the new image."
},
"form": {
"imageFile": "Image file",
@@ -299,9 +290,6 @@
},
"modal": {
"connectionToBmcWillBeLost": "Connection to BMC will be lost",
- "serverShutdownMessage": "There will be a server outage until the server is powered back on. Are you sure you want to shut down?",
- "serverShutdownWillCauseOutage": "Server shutdown will cause outage",
- "shutDownServer": "Shut down server",
"rebootFromBackup": {
"message1": "A BMC reboot is required before the system can run the backup image %{backup}. The reboot will cause a disconnection, and may require logging in again.",
"message2": "The current firmware image %{current} will be moved to backup. During the reboot, server cannot be powered back on.",
@@ -309,13 +297,6 @@
"primaryAction": "Reboot BMC from backup image",
"title": "@:pageFirmware.modal.connectionToBmcWillBeLost"
},
- "uploadAndRebootSingleImage": {
- "message1": "A BMC reboot is required before the system can run the new firmware image. The reboot will cause a disconnection, and may require logging in again.",
- "message2": "During the reboot, the server cannot be powered back on. The backup image will be permanently deleted.",
- "message3": "Are you sure you want to upload the new firmware image and reboot the BMC?",
- "primaryAction": "Upload and reboot BMC",
- "title": "@:pageFirmware.modal.connectionToBmcWillBeLost"
- },
"uploadAndRebootBmcOrHost": {
"message1": "A BMC or host reboot is required before the system can run the new firmware image. The reboot will cause a disconnection, and may require logging in again.",
"message2": "The backup image will be permanently deleted.",
@@ -334,6 +315,45 @@
"successRebootFromBackup": "Successfully started reboot from backup image.",
"successUploadMessage": "The upload was successful. During code update, the BMC will be not be responsive. Wait for the code update notification before making any changes.",
"successUploadTitle": "Code update started"
+ },
+ "singleFileUpload": {
+ "backupImage": "Backup image",
+ "bmcAndServer": "BMC and server:",
+ "fileAddress": "File address",
+ "fileSource": "File source",
+ "runningImage": "Running image",
+ "startUpdate": "Start update",
+ "switchToRunning": "Switch to running",
+ "updateFirmware": "Update firmware",
+ "alert": {
+ "operationInProgress": "Server power operation in progress.",
+ "serverMustBePoweredOffTo": "Server must be powered off to:",
+ "serverMustBePoweredOffToUpdateFirmware": "Server must be powered off to update firmware",
+ "switchRunningAndBackupImages": "Switch running and backup images",
+ "updateFirmware": "Update firmware",
+ "viewServerPowerOperations": "View server power operations"
+ },
+ "modal": {
+ "switchImages": "Switch images",
+ "switchRunningImage": "Switch running image",
+ "switchRunningImageInfo": "A BMC reboot is required to run the backup image. The application might be unresponsive during this time.",
+ "switchRunningImageInfo2": "Are you sure you want to switch to the backup image (%{backup})?",
+ "updateFirmwareInfo": "The BMC will reboot during the update process. The server cannot be powered on until the update is finished.",
+ "updateFirmwareInfo2": "The running image (%{running}) will be copied to backup and the backup image (%{backup}) will be permanently deleted.",
+ "updateFirmwareInfo3": "Are you sure you want to proceed with the update?"
+ },
+ "toast": {
+ "errorSwitchImages": "Error switching running and backup images.",
+ "rebootStarted": "Reboot started",
+ "rebootStartedMessage": "Successfully started reboot from backup image.",
+ "startTime": "Start time:",
+ "updateStarted": "Update started",
+ "updateStartedMessage": "Wait for the firmware update notification before making any changes.",
+ "verifySwitch": "Verify switch",
+ "verifySwitchMessage": "Refresh the application to verify the running and backup images switched.",
+ "verifyUpdate": "Verify update",
+ "verifyUpdateMessage": "Refresh the application to verify firmware updated successfully"
+ }
}
},
"pageHardwareStatus": {