/*
// Copyright (c) 2018-2019 Intel Corporation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//      http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
*/
#include <sys/sysinfo.h>
#include <systemd/sd-journal.h>

#include <boost/asio/io_service.hpp>
#include <boost/asio/posix/stream_descriptor.hpp>
#include <boost/asio/steady_timer.hpp>
#include <boost/container/flat_map.hpp>
#include <boost/container/flat_set.hpp>
#include <gpiod.hpp>
#include <nlohmann/json.hpp>
#include <phosphor-logging/log.hpp>
#include <sdbusplus/asio/object_server.hpp>

#include <filesystem>
#include <fstream>
#include <string_view>

namespace power_control
{
static boost::asio::io_service io;
std::shared_ptr<sdbusplus::asio::connection> conn;

static std::string node = "0";

enum class DbusConfigType
{
    name = 1,
    path,
    interface,
    property
};
boost::container::flat_map<DbusConfigType, std::string> dbusParams = {
    {DbusConfigType::name, "DbusName"},
    {DbusConfigType::path, "Path"},
    {DbusConfigType::interface, "Interface"},
    {DbusConfigType::property, "Property"}};

enum class ConfigType
{
    GPIO = 1,
    DBUS
};

struct ConfigData
{
    std::string name;
    std::string lineName;
    std::string dbusName;
    std::string path;
    std::string interface;
    bool polarity;
    ConfigType type;
};

static ConfigData powerOutConfig;
static ConfigData powerOkConfig;
static ConfigData resetOutConfig;
static ConfigData nmiOutConfig;
static ConfigData sioPwrGoodConfig;
static ConfigData sioOnControlConfig;
static ConfigData sioS5Config;
static ConfigData postCompleteConfig;
static ConfigData powerButtonConfig;
static ConfigData resetButtonConfig;
static ConfigData idButtonConfig;
static ConfigData nmiButtonConfig;
static ConfigData slotPowerConfig;

// map for storing list of gpio parameters whose config are to be read from x86
// power control json config
boost::container::flat_map<std::string, ConfigData*> powerSignalMap = {
    {"PowerOut", &powerOutConfig},
    {"PowerOk", &powerOkConfig},
    {"ResetOut", &resetOutConfig},
    {"NMIOut", &nmiOutConfig},
    {"SioPowerGood", &sioPwrGoodConfig},
    {"SioOnControl", &sioOnControlConfig},
    {"SIOS5", &sioS5Config},
    {"PostComplete", &postCompleteConfig},
    {"PowerButton", &powerButtonConfig},
    {"ResetButton", &resetButtonConfig},
    {"IdButton", &idButtonConfig},
    {"NMIButton", &nmiButtonConfig},
    {"SlotPower", &slotPowerConfig}};

static std::string hostDbusName = "xyz.openbmc_project.State.Host";
static std::string chassisDbusName = "xyz.openbmc_project.State.Chassis";
static std::string osDbusName = "xyz.openbmc_project.State.OperatingSystem";
static std::string buttonDbusName = "xyz.openbmc_project.Chassis.Buttons";
static std::string nmiDbusName = "xyz.openbmc_project.Control.Host.NMI";
static std::string rstCauseDbusName =
    "xyz.openbmc_project.Control.Host.RestartCause";
static std::shared_ptr<sdbusplus::asio::dbus_interface> hostIface;
static std::shared_ptr<sdbusplus::asio::dbus_interface> chassisIface;
#ifdef CHASSIS_SYSTEM_RESET
static std::shared_ptr<sdbusplus::asio::dbus_interface> chassisSysIface;
static std::shared_ptr<sdbusplus::asio::dbus_interface> chassisSlotIface;
#endif
static std::shared_ptr<sdbusplus::asio::dbus_interface> powerButtonIface;
static std::shared_ptr<sdbusplus::asio::dbus_interface> resetButtonIface;
static std::shared_ptr<sdbusplus::asio::dbus_interface> nmiButtonIface;
static std::shared_ptr<sdbusplus::asio::dbus_interface> osIface;
static std::shared_ptr<sdbusplus::asio::dbus_interface> idButtonIface;
static std::shared_ptr<sdbusplus::asio::dbus_interface> nmiOutIface;
static std::shared_ptr<sdbusplus::asio::dbus_interface> restartCauseIface;

static gpiod::line powerButtonMask;
static gpiod::line resetButtonMask;
static bool nmiButtonMasked = false;

// This map contains all timer values that are to be read from json config
boost::container::flat_map<std::string, int> TimerMap = {
    {"PowerPulseMs", 200},
    {"ForceOffPulseMs", 15000},
    {"ResetPulseMs", 500},
    {"PowerCycleMs", 5000},
    {"SioPowerGoodWatchdogMs", 1000},
    {"PsPowerOKWatchdogMs", 8000},
    {"GracefulPowerOffS", (5 * 60)},
    {"WarmResetCheckMs", 500},
    {"PowerOffSaveMs", 7000},
    {"SlotPowerCycleMs", 200}};
const static std::filesystem::path powerControlDir = "/var/lib/power-control";
const static constexpr std::string_view powerStateFile = "power-state";

static bool nmiEnabled = true;
static bool sioEnabled = true;

// Timers
// Time holding GPIOs asserted
static boost::asio::steady_timer gpioAssertTimer(io);
// Time between off and on during a power cycle
static boost::asio::steady_timer powerCycleTimer(io);
// Time OS gracefully powering off
static boost::asio::steady_timer gracefulPowerOffTimer(io);
// Time the warm reset check
static boost::asio::steady_timer warmResetCheckTimer(io);
// Time power supply power OK assertion on power-on
static boost::asio::steady_timer psPowerOKWatchdogTimer(io);
// Time SIO power good assertion on power-on
static boost::asio::steady_timer sioPowerGoodWatchdogTimer(io);
// Time power-off state save for power loss tracking
static boost::asio::steady_timer powerStateSaveTimer(io);
// POH timer
static boost::asio::steady_timer pohCounterTimer(io);
// Time when to allow restart cause updates
static boost::asio::steady_timer restartCauseTimer(io);
static boost::asio::steady_timer slotPowerCycleTimer(io);

// GPIO Lines and Event Descriptors
static gpiod::line psPowerOKLine;
static boost::asio::posix::stream_descriptor psPowerOKEvent(io);
static gpiod::line sioPowerGoodLine;
static boost::asio::posix::stream_descriptor sioPowerGoodEvent(io);
static gpiod::line sioOnControlLine;
static boost::asio::posix::stream_descriptor sioOnControlEvent(io);
static gpiod::line sioS5Line;
static boost::asio::posix::stream_descriptor sioS5Event(io);
static gpiod::line powerButtonLine;
static boost::asio::posix::stream_descriptor powerButtonEvent(io);
static gpiod::line resetButtonLine;
static boost::asio::posix::stream_descriptor resetButtonEvent(io);
static gpiod::line nmiButtonLine;
static boost::asio::posix::stream_descriptor nmiButtonEvent(io);
static gpiod::line idButtonLine;
static boost::asio::posix::stream_descriptor idButtonEvent(io);
static gpiod::line postCompleteLine;
static boost::asio::posix::stream_descriptor postCompleteEvent(io);
static gpiod::line nmiOutLine;
static gpiod::line slotPowerLine;

static constexpr uint8_t beepPowerFail = 8;

static void beep(const uint8_t& beepPriority)
{
    std::string logMsg = "Beep with priority: " + std::to_string(beepPriority);
    phosphor::logging::log<phosphor::logging::level::INFO>(logMsg.c_str());

    conn->async_method_call(
        [](boost::system::error_code ec) {
            if (ec)
            {
                std::string errMsg =
                    "beep returned error with async_method_call (ec = " +
                    ec.message();
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
                return;
            }
        },
        "xyz.openbmc_project.BeepCode", "/xyz/openbmc_project/BeepCode",
        "xyz.openbmc_project.BeepCode", "Beep", uint8_t(beepPriority));
}

enum class PowerState
{
    on,
    waitForPSPowerOK,
    waitForSIOPowerGood,
    off,
    transitionToOff,
    gracefulTransitionToOff,
    cycleOff,
    transitionToCycleOff,
    gracefulTransitionToCycleOff,
    checkForWarmReset,
};
static PowerState powerState;
static std::string getPowerStateName(PowerState state)
{
    switch (state)
    {
        case PowerState::on:
            return "On";
            break;
        case PowerState::waitForPSPowerOK:
            return "Wait for Power Supply Power OK";
            break;
        case PowerState::waitForSIOPowerGood:
            return "Wait for SIO Power Good";
            break;
        case PowerState::off:
            return "Off";
            break;
        case PowerState::transitionToOff:
            return "Transition to Off";
            break;
        case PowerState::gracefulTransitionToOff:
            return "Graceful Transition to Off";
            break;
        case PowerState::cycleOff:
            return "Power Cycle Off";
            break;
        case PowerState::transitionToCycleOff:
            return "Transition to Power Cycle Off";
            break;
        case PowerState::gracefulTransitionToCycleOff:
            return "Graceful Transition to Power Cycle Off";
            break;
        case PowerState::checkForWarmReset:
            return "Check for Warm Reset";
            break;
        default:
            return "unknown state: " + std::to_string(static_cast<int>(state));
            break;
    }
}
static void logStateTransition(const PowerState state)
{
    std::string logMsg = "Host" + node + ": Moving to \"" +
                         getPowerStateName(state) + "\" state";
    phosphor::logging::log<phosphor::logging::level::INFO>(
        logMsg.c_str(),
        phosphor::logging::entry("STATE=%s", getPowerStateName(state).c_str()),
        phosphor::logging::entry("HOST=%s", node.c_str()));
}

enum class Event
{
    psPowerOKAssert,
    psPowerOKDeAssert,
    sioPowerGoodAssert,
    sioPowerGoodDeAssert,
    sioS5Assert,
    sioS5DeAssert,
    pltRstAssert,
    pltRstDeAssert,
    postCompleteAssert,
    postCompleteDeAssert,
    powerButtonPressed,
    resetButtonPressed,
    powerCycleTimerExpired,
    psPowerOKWatchdogTimerExpired,
    sioPowerGoodWatchdogTimerExpired,
    gracefulPowerOffTimerExpired,
    powerOnRequest,
    powerOffRequest,
    powerCycleRequest,
    resetRequest,
    gracefulPowerOffRequest,
    gracefulPowerCycleRequest,
    warmResetDetected,
};
static std::string getEventName(Event event)
{
    switch (event)
    {
        case Event::psPowerOKAssert:
            return "power supply power OK assert";
            break;
        case Event::psPowerOKDeAssert:
            return "power supply power OK de-assert";
            break;
        case Event::sioPowerGoodAssert:
            return "SIO power good assert";
            break;
        case Event::sioPowerGoodDeAssert:
            return "SIO power good de-assert";
            break;
        case Event::sioS5Assert:
            return "SIO S5 assert";
            break;
        case Event::sioS5DeAssert:
            return "SIO S5 de-assert";
            break;
        case Event::pltRstAssert:
            return "PLT_RST assert";
            break;
        case Event::pltRstDeAssert:
            return "PLT_RST de-assert";
            break;
        case Event::postCompleteAssert:
            return "POST Complete assert";
            break;
        case Event::postCompleteDeAssert:
            return "POST Complete de-assert";
            break;
        case Event::powerButtonPressed:
            return "power button pressed";
            break;
        case Event::resetButtonPressed:
            return "reset button pressed";
            break;
        case Event::powerCycleTimerExpired:
            return "power cycle timer expired";
            break;
        case Event::psPowerOKWatchdogTimerExpired:
            return "power supply power OK watchdog timer expired";
            break;
        case Event::sioPowerGoodWatchdogTimerExpired:
            return "SIO power good watchdog timer expired";
            break;
        case Event::gracefulPowerOffTimerExpired:
            return "graceful power-off timer expired";
            break;
        case Event::powerOnRequest:
            return "power-on request";
            break;
        case Event::powerOffRequest:
            return "power-off request";
            break;
        case Event::powerCycleRequest:
            return "power-cycle request";
            break;
        case Event::resetRequest:
            return "reset request";
            break;
        case Event::gracefulPowerOffRequest:
            return "graceful power-off request";
            break;
        case Event::gracefulPowerCycleRequest:
            return "graceful power-cycle request";
            break;
        case Event::warmResetDetected:
            return "warm reset detected";
            break;
        default:
            return "unknown event: " + std::to_string(static_cast<int>(event));
            break;
    }
}
static void logEvent(const std::string_view stateHandler, const Event event)
{
    std::string logMsg{stateHandler};
    logMsg += ": " + getEventName(event) + " event received";
    phosphor::logging::log<phosphor::logging::level::INFO>(
        logMsg.c_str(),
        phosphor::logging::entry("EVENT=%s", getEventName(event).c_str()));
}

// Power state handlers
static void powerStateOn(const Event event);
static void powerStateWaitForPSPowerOK(const Event event);
static void powerStateWaitForSIOPowerGood(const Event event);
static void powerStateOff(const Event event);
static void powerStateTransitionToOff(const Event event);
static void powerStateGracefulTransitionToOff(const Event event);
static void powerStateCycleOff(const Event event);
static void powerStateTransitionToCycleOff(const Event event);
static void powerStateGracefulTransitionToCycleOff(const Event event);
static void powerStateCheckForWarmReset(const Event event);

static std::function<void(const Event)> getPowerStateHandler(PowerState state)
{
    switch (state)
    {
        case PowerState::on:
            return powerStateOn;
            break;
        case PowerState::waitForPSPowerOK:
            return powerStateWaitForPSPowerOK;
            break;
        case PowerState::waitForSIOPowerGood:
            return powerStateWaitForSIOPowerGood;
            break;
        case PowerState::off:
            return powerStateOff;
            break;
        case PowerState::transitionToOff:
            return powerStateTransitionToOff;
            break;
        case PowerState::gracefulTransitionToOff:
            return powerStateGracefulTransitionToOff;
            break;
        case PowerState::cycleOff:
            return powerStateCycleOff;
            break;
        case PowerState::transitionToCycleOff:
            return powerStateTransitionToCycleOff;
            break;
        case PowerState::gracefulTransitionToCycleOff:
            return powerStateGracefulTransitionToCycleOff;
            break;
        case PowerState::checkForWarmReset:
            return powerStateCheckForWarmReset;
            break;
        default:
            return nullptr;
            break;
    }
};

static void sendPowerControlEvent(const Event event)
{
    std::function<void(const Event)> handler = getPowerStateHandler(powerState);
    if (handler == nullptr)
    {
        std::string errMsg = "Failed to find handler for power state: " +
                             std::to_string(static_cast<int>(powerState));
        phosphor::logging::log<phosphor::logging::level::INFO>(errMsg.c_str());
        return;
    }
    handler(event);
}

static uint64_t getCurrentTimeMs()
{
    struct timespec time = {};

    if (clock_gettime(CLOCK_REALTIME, &time) < 0)
    {
        return 0;
    }
    uint64_t currentTimeMs = static_cast<uint64_t>(time.tv_sec) * 1000;
    currentTimeMs += static_cast<uint64_t>(time.tv_nsec) / 1000 / 1000;

    return currentTimeMs;
}

static constexpr std::string_view getHostState(const PowerState state)
{
    switch (state)
    {
        case PowerState::on:
        case PowerState::gracefulTransitionToOff:
        case PowerState::gracefulTransitionToCycleOff:
            return "xyz.openbmc_project.State.Host.HostState.Running";
            break;
        case PowerState::waitForPSPowerOK:
        case PowerState::waitForSIOPowerGood:
        case PowerState::off:
        case PowerState::transitionToOff:
        case PowerState::transitionToCycleOff:
        case PowerState::cycleOff:
        case PowerState::checkForWarmReset:
            return "xyz.openbmc_project.State.Host.HostState.Off";
            break;
        default:
            return "";
            break;
    }
};
static constexpr std::string_view getChassisState(const PowerState state)
{
    switch (state)
    {
        case PowerState::on:
        case PowerState::transitionToOff:
        case PowerState::gracefulTransitionToOff:
        case PowerState::transitionToCycleOff:
        case PowerState::gracefulTransitionToCycleOff:
        case PowerState::checkForWarmReset:
            return "xyz.openbmc_project.State.Chassis.PowerState.On";
            break;
        case PowerState::waitForPSPowerOK:
        case PowerState::waitForSIOPowerGood:
        case PowerState::off:
        case PowerState::cycleOff:
            return "xyz.openbmc_project.State.Chassis.PowerState.Off";
            break;
        default:
            return "";
            break;
    }
};
#ifdef CHASSIS_SYSTEM_RESET
enum class SlotPowerState
{
    on,
    off,
};
static SlotPowerState slotPowerState;
static constexpr std::string_view getSlotState(const SlotPowerState state)
{
    switch (state)
    {
        case SlotPowerState::on:
            return "xyz.openbmc_project.State.Chassis.PowerState.On";
            break;
        case SlotPowerState::off:
            return "xyz.openbmc_project.State.Chassis.PowerState.Off";
            break;
        default:
            return "";
            break;
    }
};
static void setSlotPowerState(const SlotPowerState state)
{
    slotPowerState = state;
    chassisSlotIface->set_property("CurrentPowerState",
                                   std::string(getSlotState(slotPowerState)));
    chassisSlotIface->set_property("LastStateChangeTime", getCurrentTimeMs());
}
#endif
static void savePowerState(const PowerState state)
{
    powerStateSaveTimer.expires_after(
        std::chrono::milliseconds(TimerMap["PowerOffSaveMs"]));
    powerStateSaveTimer.async_wait([state](const boost::system::error_code ec) {
        if (ec)
        {
            // operation_aborted is expected if timer is canceled before
            // completion.
            if (ec != boost::asio::error::operation_aborted)
            {
                std::string errMsg =
                    "Power-state save async_wait failed: " + ec.message();
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
            }
            return;
        }
        std::ofstream powerStateStream(powerControlDir / powerStateFile);
        powerStateStream << getChassisState(state);
    });
}
static void setPowerState(const PowerState state)
{
    powerState = state;
    logStateTransition(state);

    hostIface->set_property("CurrentHostState",
                            std::string(getHostState(powerState)));

    chassisIface->set_property("CurrentPowerState",
                               std::string(getChassisState(powerState)));
    chassisIface->set_property("LastStateChangeTime", getCurrentTimeMs());

    // Save the power state for the restore policy
    savePowerState(state);
}

enum class RestartCause
{
    command,
    resetButton,
    powerButton,
    watchdog,
    powerPolicyOn,
    powerPolicyRestore,
    softReset,
};
static boost::container::flat_set<RestartCause> causeSet;
static std::string getRestartCause(RestartCause cause)
{
    switch (cause)
    {
        case RestartCause::command:
            return "xyz.openbmc_project.State.Host.RestartCause.IpmiCommand";
            break;
        case RestartCause::resetButton:
            return "xyz.openbmc_project.State.Host.RestartCause.ResetButton";
            break;
        case RestartCause::powerButton:
            return "xyz.openbmc_project.State.Host.RestartCause.PowerButton";
            break;
        case RestartCause::watchdog:
            return "xyz.openbmc_project.State.Host.RestartCause.WatchdogTimer";
            break;
        case RestartCause::powerPolicyOn:
            return "xyz.openbmc_project.State.Host.RestartCause.PowerPolicyAlwaysOn";
            break;
        case RestartCause::powerPolicyRestore:
            return "xyz.openbmc_project.State.Host.RestartCause.PowerPolicyPreviousState";
            break;
        case RestartCause::softReset:
            return "xyz.openbmc_project.State.Host.RestartCause.SoftReset";
            break;
        default:
            return "xyz.openbmc_project.State.Host.RestartCause.Unknown";
            break;
    }
}
static void addRestartCause(const RestartCause cause)
{
    // Add this to the set of causes for this restart
    causeSet.insert(cause);
}
static void clearRestartCause()
{
    // Clear the set for the next restart
    causeSet.clear();
}
static void setRestartCauseProperty(const std::string& cause)
{
    std::string logMsg = "RestartCause set to " + cause;
    phosphor::logging::log<phosphor::logging::level::INFO>(logMsg.c_str());
    restartCauseIface->set_property("RestartCause", cause);
}

static void resetACBootProperty()
{
    if ((causeSet.contains(RestartCause::command)) ||
        (causeSet.contains(RestartCause::softReset)))
    {
        conn->async_method_call(
            [](boost::system::error_code ec) {
                if (ec)
                {
                    phosphor::logging::log<phosphor::logging::level::ERR>(
                        "failed to reset ACBoot property");
                }
            },
            "xyz.openbmc_project.Settings",
            "/xyz/openbmc_project/control/host0/ac_boot",
            "org.freedesktop.DBus.Properties", "Set",
            "xyz.openbmc_project.Common.ACBoot", "ACBoot",
            std::variant<std::string>{"False"});
    }
}

static void setRestartCause()
{
    // Determine the actual restart cause based on the set of causes
    std::string restartCause =
        "xyz.openbmc_project.State.Host.RestartCause.Unknown";
    if (causeSet.contains(RestartCause::watchdog))
    {
        restartCause = getRestartCause(RestartCause::watchdog);
    }
    else if (causeSet.contains(RestartCause::command))
    {
        restartCause = getRestartCause(RestartCause::command);
    }
    else if (causeSet.contains(RestartCause::resetButton))
    {
        restartCause = getRestartCause(RestartCause::resetButton);
    }
    else if (causeSet.contains(RestartCause::powerButton))
    {
        restartCause = getRestartCause(RestartCause::powerButton);
    }
    else if (causeSet.contains(RestartCause::powerPolicyOn))
    {
        restartCause = getRestartCause(RestartCause::powerPolicyOn);
    }
    else if (causeSet.contains(RestartCause::powerPolicyRestore))
    {
        restartCause = getRestartCause(RestartCause::powerPolicyRestore);
    }
    else if (causeSet.contains(RestartCause::softReset))
    {
        restartCause = getRestartCause(RestartCause::softReset);
    }

    setRestartCauseProperty(restartCause);
}

static void systemPowerGoodFailedLog()
{
    sd_journal_send(
        "MESSAGE=PowerControl: system power good failed to assert (VR failure)",
        "PRIORITY=%i", LOG_INFO, "REDFISH_MESSAGE_ID=%s",
        "OpenBMC.0.1.SystemPowerGoodFailed", "REDFISH_MESSAGE_ARGS=%d",
        TimerMap["SioPowerGoodWatchdogMs"], NULL);
}

static void psPowerOKFailedLog()
{
    sd_journal_send(
        "MESSAGE=PowerControl: power supply power good failed to assert",
        "PRIORITY=%i", LOG_INFO, "REDFISH_MESSAGE_ID=%s",
        "OpenBMC.0.1.PowerSupplyPowerGoodFailed", "REDFISH_MESSAGE_ARGS=%d",
        TimerMap["PsPowerOKWatchdogMs"], NULL);
}

static void powerRestorePolicyLog()
{
    sd_journal_send("MESSAGE=PowerControl: power restore policy applied",
                    "PRIORITY=%i", LOG_INFO, "REDFISH_MESSAGE_ID=%s",
                    "OpenBMC.0.1.PowerRestorePolicyApplied", NULL);
}

static void powerButtonPressLog()
{
    sd_journal_send("MESSAGE=PowerControl: power button pressed", "PRIORITY=%i",
                    LOG_INFO, "REDFISH_MESSAGE_ID=%s",
                    "OpenBMC.0.1.PowerButtonPressed", NULL);
}

static void resetButtonPressLog()
{
    sd_journal_send("MESSAGE=PowerControl: reset button pressed", "PRIORITY=%i",
                    LOG_INFO, "REDFISH_MESSAGE_ID=%s",
                    "OpenBMC.0.1.ResetButtonPressed", NULL);
}

static void nmiButtonPressLog()
{
    sd_journal_send("MESSAGE=PowerControl: NMI button pressed", "PRIORITY=%i",
                    LOG_INFO, "REDFISH_MESSAGE_ID=%s",
                    "OpenBMC.0.1.NMIButtonPressed", NULL);
}

static void nmiDiagIntLog()
{
    sd_journal_send("MESSAGE=PowerControl: NMI Diagnostic Interrupt",
                    "PRIORITY=%i", LOG_INFO, "REDFISH_MESSAGE_ID=%s",
                    "OpenBMC.0.1.NMIDiagnosticInterrupt", NULL);
}

static int initializePowerStateStorage()
{
    // create the power control directory if it doesn't exist
    std::error_code ec;
    if (!(std::filesystem::create_directories(powerControlDir, ec)))
    {
        if (ec.value() != 0)
        {
            std::string errMsg = "failed to create " +
                                 powerControlDir.string() + ": " + ec.message();
            phosphor::logging::log<phosphor::logging::level::ERR>(
                errMsg.c_str());
            return -1;
        }
    }
    // Create the power state file if it doesn't exist
    if (!std::filesystem::exists(powerControlDir / powerStateFile))
    {
        std::ofstream powerStateStream(powerControlDir / powerStateFile);
        powerStateStream << getChassisState(powerState);
    }
    return 0;
}

static bool wasPowerDropped()
{
    std::ifstream powerStateStream(powerControlDir / powerStateFile);
    if (!powerStateStream.is_open())
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "Failed to open power state file");
        return false;
    }

    std::string state;
    std::getline(powerStateStream, state);
    return state == "xyz.openbmc_project.State.Chassis.PowerState.On";
}

static void invokePowerRestorePolicy(const std::string& policy)
{
    // Async events may call this twice, but we only want to run once
    static bool policyInvoked = false;
    if (policyInvoked)
    {
        return;
    }
    policyInvoked = true;

    std::string logMsg = "Power restore delay expired, invoking " + policy;
    phosphor::logging::log<phosphor::logging::level::INFO>(logMsg.c_str());
    if (policy ==
        "xyz.openbmc_project.Control.Power.RestorePolicy.Policy.AlwaysOn")
    {
        sendPowerControlEvent(Event::powerOnRequest);
        setRestartCauseProperty(getRestartCause(RestartCause::powerPolicyOn));
    }
    else if (policy ==
             "xyz.openbmc_project.Control.Power.RestorePolicy.Policy.Restore")
    {
        if (wasPowerDropped())
        {
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "Power was dropped, restoring Host On state");
            sendPowerControlEvent(Event::powerOnRequest);
            setRestartCauseProperty(
                getRestartCause(RestartCause::powerPolicyRestore));
        }
        else
        {
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "No power drop, restoring Host Off state");
        }
    }
    // We're done with the previous power state for the restore policy, so store
    // the current state
    savePowerState(powerState);
}

static void powerRestorePolicyDelay(int delay)
{
    // Async events may call this twice, but we only want to run once
    static bool delayStarted = false;
    if (delayStarted)
    {
        return;
    }
    delayStarted = true;
    // Calculate the delay from now to meet the requested delay
    // Subtract the approximate uboot time
    static constexpr const int ubootSeconds = 20;
    delay -= ubootSeconds;
    // Subtract the time since boot
    struct sysinfo info = {};
    if (sysinfo(&info) == 0)
    {
        delay -= info.uptime;
    }
    // 0 is the minimum delay
    delay = std::max(delay, 0);

    static boost::asio::steady_timer powerRestorePolicyTimer(io);
    powerRestorePolicyTimer.expires_after(std::chrono::seconds(delay));
    std::string logMsg =
        "Power restore delay of " + std::to_string(delay) + " seconds started";
    phosphor::logging::log<phosphor::logging::level::INFO>(logMsg.c_str());
    powerRestorePolicyTimer.async_wait([](const boost::system::error_code ec) {
        if (ec)
        {
            // operation_aborted is expected if timer is canceled before
            // completion.
            if (ec != boost::asio::error::operation_aborted)
            {
                std::string errMsg =
                    "power restore policy async_wait failed: " + ec.message();
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
            }
            return;
        }
        // Get Power Restore Policy
        // In case PowerRestorePolicy is not available, set a match for it
        static std::unique_ptr<sdbusplus::bus::match::match>
            powerRestorePolicyMatch = std::make_unique<
                sdbusplus::bus::match::match>(
                *conn,
                "type='signal',interface='org.freedesktop.DBus.Properties',"
                "member='PropertiesChanged',arg0namespace='xyz.openbmc_"
                "project.Control.Power.RestorePolicy'",
                [](sdbusplus::message::message& msg) {
                    std::string interfaceName;
                    boost::container::flat_map<std::string,
                                               std::variant<std::string>>
                        propertiesChanged;
                    std::string policy;
                    try
                    {
                        msg.read(interfaceName, propertiesChanged);
                        policy = std::get<std::string>(
                            propertiesChanged.begin()->second);
                    }
                    catch (const std::exception& e)
                    {
                        phosphor::logging::log<phosphor::logging::level::ERR>(
                            "Unable to read power restore policy value");
                        powerRestorePolicyMatch.reset();
                        return;
                    }
                    invokePowerRestorePolicy(policy);
                    powerRestorePolicyMatch.reset();
                });

        // Check if it's already on DBus
        conn->async_method_call(
            [](boost::system::error_code ec,
               const std::variant<std::string>& policyProperty) {
                if (ec)
                {
                    return;
                }
                powerRestorePolicyMatch.reset();
                const std::string* policy =
                    std::get_if<std::string>(&policyProperty);
                if (policy == nullptr)
                {
                    phosphor::logging::log<phosphor::logging::level::ERR>(
                        "Unable to read power restore policy value");
                    return;
                }
                invokePowerRestorePolicy(*policy);
            },
            "xyz.openbmc_project.Settings",
            "/xyz/openbmc_project/control/host0/power_restore_policy",
            "org.freedesktop.DBus.Properties", "Get",
            "xyz.openbmc_project.Control.Power.RestorePolicy",
            "PowerRestorePolicy");
    });
}

static void powerRestorePolicyStart()
{
    phosphor::logging::log<phosphor::logging::level::INFO>(
        "Power restore policy started");
    powerRestorePolicyLog();

    // Get the desired delay time
    // In case PowerRestoreDelay is not available, set a match for it
    static std::unique_ptr<sdbusplus::bus::match::match>
        powerRestoreDelayMatch = std::make_unique<sdbusplus::bus::match::match>(
            *conn,
            "type='signal',interface='org.freedesktop.DBus.Properties',member='"
            "PropertiesChanged',arg0namespace='xyz.openbmc_project.Control."
            "Power.RestoreDelay'",
            [](sdbusplus::message::message& msg) {
                std::string interfaceName;
                boost::container::flat_map<std::string, std::variant<uint16_t>>
                    propertiesChanged;
                int delay = 0;
                try
                {
                    msg.read(interfaceName, propertiesChanged);
                    delay =
                        std::get<uint16_t>(propertiesChanged.begin()->second);
                }
                catch (const std::exception& e)
                {
                    phosphor::logging::log<phosphor::logging::level::ERR>(
                        "Unable to read power restore delay value");
                    powerRestoreDelayMatch.reset();
                    return;
                }
                powerRestorePolicyDelay(delay);
                powerRestoreDelayMatch.reset();
            });

    // Check if it's already on DBus
    conn->async_method_call(
        [](boost::system::error_code ec,
           const std::variant<uint16_t>& delayProperty) {
            if (ec)
            {
                return;
            }
            powerRestoreDelayMatch.reset();
            const uint16_t* delay = std::get_if<uint16_t>(&delayProperty);
            if (delay == nullptr)
            {
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    "Unable to read power restore delay value");
                return;
            }
            powerRestorePolicyDelay(*delay);
        },
        "xyz.openbmc_project.Settings",
        "/xyz/openbmc_project/control/power_restore_delay",
        "org.freedesktop.DBus.Properties", "Get",
        "xyz.openbmc_project.Control.Power.RestoreDelay", "PowerRestoreDelay");
}

static void powerRestorePolicyCheck()
{
    // In case ACBoot is not available, set a match for it
    static std::unique_ptr<sdbusplus::bus::match::match> acBootMatch =
        std::make_unique<sdbusplus::bus::match::match>(
            *conn,
            "type='signal',interface='org.freedesktop.DBus.Properties',member='"
            "PropertiesChanged',arg0namespace='xyz.openbmc_project.Common."
            "ACBoot'",
            [](sdbusplus::message::message& msg) {
                std::string interfaceName;
                boost::container::flat_map<std::string,
                                           std::variant<std::string>>
                    propertiesChanged;
                std::string acBoot;
                try
                {
                    msg.read(interfaceName, propertiesChanged);
                    acBoot = std::get<std::string>(
                        propertiesChanged.begin()->second);
                }
                catch (const std::exception& e)
                {
                    phosphor::logging::log<phosphor::logging::level::ERR>(
                        "Unable to read AC Boot status");
                    acBootMatch.reset();
                    return;
                }
                if (acBoot == "Unknown")
                {
                    return;
                }
                if (acBoot == "True")
                {
                    // Start the Power Restore policy
                    powerRestorePolicyStart();
                }
                acBootMatch.reset();
            });

    // Check if it's already on DBus
    conn->async_method_call(
        [](boost::system::error_code ec,
           const std::variant<std::string>& acBootProperty) {
            if (ec)
            {
                return;
            }
            const std::string* acBoot =
                std::get_if<std::string>(&acBootProperty);
            if (acBoot == nullptr)
            {
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    "Unable to read AC Boot status");
                return;
            }
            if (*acBoot == "Unknown")
            {
                return;
            }
            if (*acBoot == "True")
            {
                // Start the Power Restore policy
                powerRestorePolicyStart();
            }
            acBootMatch.reset();
        },
        "xyz.openbmc_project.Settings",
        "/xyz/openbmc_project/control/host0/ac_boot",
        "org.freedesktop.DBus.Properties", "Get",
        "xyz.openbmc_project.Common.ACBoot", "ACBoot");
}

static void waitForGPIOEvent(const std::string& name,
                             const std::function<void(bool)>& eventHandler,
                             gpiod::line& line,
                             boost::asio::posix::stream_descriptor& event)
{
    event.async_wait(
        boost::asio::posix::stream_descriptor::wait_read,
        [&name, eventHandler, &line,
         &event](const boost::system::error_code ec) {
            if (ec)
            {
                std::string errMsg =
                    name + " fd handler error: " + ec.message();
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
                // TODO: throw here to force power-control to restart?
                return;
            }
            gpiod::line_event line_event = line.event_read();
            eventHandler(line_event.event_type ==
                         gpiod::line_event::RISING_EDGE);
            waitForGPIOEvent(name, eventHandler, line, event);
        });
}

static bool requestGPIOEvents(
    const std::string& name, const std::function<void(bool)>& handler,
    gpiod::line& gpioLine,
    boost::asio::posix::stream_descriptor& gpioEventDescriptor)
{
    // Find the GPIO line
    gpioLine = gpiod::find_line(name);
    if (!gpioLine)
    {
        std::string errMsg = "Failed to find the " + name + " line";
        phosphor::logging::log<phosphor::logging::level::ERR>(errMsg.c_str());
        return false;
    }

    try
    {
        gpioLine.request(
            {"power-control", gpiod::line_request::EVENT_BOTH_EDGES});
    }
    catch (const std::exception&)
    {
        std::string errMsg = "Failed to request events for " + name;
        phosphor::logging::log<phosphor::logging::level::ERR>(errMsg.c_str());
        return false;
    }

    int gpioLineFd = gpioLine.event_get_fd();
    if (gpioLineFd < 0)
    {
        std::string errMsg = "Failed to name " + name + " fd";
        phosphor::logging::log<phosphor::logging::level::ERR>(errMsg.c_str());
        return false;
    }

    gpioEventDescriptor.assign(gpioLineFd);

    waitForGPIOEvent(name, handler, gpioLine, gpioEventDescriptor);
    return true;
}

static bool setGPIOOutput(const std::string& name, const int value,
                          gpiod::line& gpioLine)
{
    // Find the GPIO line
    gpioLine = gpiod::find_line(name);
    if (!gpioLine)
    {
        std::string errMsg = "Failed to find the " + name + " line";
        phosphor::logging::log<phosphor::logging::level::ERR>(errMsg.c_str());
        return false;
    }

    // Request GPIO output to specified value
    try
    {
        gpioLine.request({__FUNCTION__, gpiod::line_request::DIRECTION_OUTPUT},
                         value);
    }
    catch (const std::exception&)
    {
        std::string errMsg = "Failed to request " + name + " output";
        phosphor::logging::log<phosphor::logging::level::ERR>(errMsg.c_str());
        return false;
    }

    std::string logMsg = name + " set to " + std::to_string(value);
    phosphor::logging::log<phosphor::logging::level::INFO>(logMsg.c_str());
    return true;
}

static int setMaskedGPIOOutputForMs(gpiod::line& maskedGPIOLine,
                                    const std::string& name, const int value,
                                    const int durationMs)
{
    // Set the masked GPIO line to the specified value
    maskedGPIOLine.set_value(value);
    std::string logMsg = name + " set to " + std::to_string(value);
    phosphor::logging::log<phosphor::logging::level::INFO>(logMsg.c_str());
    gpioAssertTimer.expires_after(std::chrono::milliseconds(durationMs));
    gpioAssertTimer.async_wait([maskedGPIOLine, value,
                                name](const boost::system::error_code ec) {
        // Set the masked GPIO line back to the opposite value
        maskedGPIOLine.set_value(!value);
        std::string logMsg = name + " released";
        phosphor::logging::log<phosphor::logging::level::INFO>(logMsg.c_str());
        if (ec)
        {
            // operation_aborted is expected if timer is canceled before
            // completion.
            if (ec != boost::asio::error::operation_aborted)
            {
                std::string errMsg =
                    name + " async_wait failed: " + ec.message();
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
            }
        }
    });
    return 0;
}

static int setGPIOOutputForMs(const ConfigData& config, const int value,
                              const int durationMs)
{
    // If the requested GPIO is masked, use the mask line to set the output
    if (powerButtonMask && config.lineName == powerOutConfig.lineName)
    {
        return setMaskedGPIOOutputForMs(powerButtonMask, config.lineName, value,
                                        durationMs);
    }
    if (resetButtonMask && config.lineName == resetOutConfig.lineName)
    {
        return setMaskedGPIOOutputForMs(resetButtonMask, config.lineName, value,
                                        durationMs);
    }

    // No mask set, so request and set the GPIO normally
    gpiod::line gpioLine;
    if (!setGPIOOutput(config.lineName, value, gpioLine))
    {
        return -1;
    }
    const std::string name = config.lineName;

    gpioAssertTimer.expires_after(std::chrono::milliseconds(durationMs));
    gpioAssertTimer.async_wait([gpioLine, value,
                                name](const boost::system::error_code ec) {
        // Set the GPIO line back to the opposite value
        gpioLine.set_value(!value);
        std::string logMsg = name + " released";
        phosphor::logging::log<phosphor::logging::level::INFO>(logMsg.c_str());
        if (ec)
        {
            // operation_aborted is expected if timer is canceled before
            // completion.
            if (ec != boost::asio::error::operation_aborted)
            {
                std::string errMsg =
                    name + " async_wait failed: " + ec.message();
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
            }
        }
    });
    return 0;
}

static int assertGPIOForMs(const ConfigData& config, const int durationMs)
{
    return setGPIOOutputForMs(config, config.polarity, durationMs);
}

static void powerOn()
{
    assertGPIOForMs(powerOutConfig, TimerMap["PowerPulseMs"]);
}
#ifdef CHASSIS_SYSTEM_RESET
static int slotPowerOn()
{
    if (power_control::slotPowerState != power_control::SlotPowerState::on)
    {

        slotPowerLine.set_value(1);

        if (slotPowerLine.get_value() > 0)
        {
            setSlotPowerState(SlotPowerState::on);
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "Slot Power is switched On\n");
        }
        else
        {
            return -1;
        }
    }
    else
    {
        phosphor::logging::log<phosphor::logging::level::INFO>(
            "Slot Power is already in 'On' state\n");
        return -1;
    }
    return 0;
}
static int slotPowerOff()
{
    if (power_control::slotPowerState != power_control::SlotPowerState::off)
    {
        slotPowerLine.set_value(0);

        if (!(slotPowerLine.get_value() > 0))
        {
            setSlotPowerState(SlotPowerState::off);
            setPowerState(PowerState::off);
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "Slot Power is switched Off\n");
        }
        else
        {
            return -1;
        }
    }
    else
    {
        phosphor::logging::log<phosphor::logging::level::INFO>(
            "Slot Power is already in 'Off' state\n");
        return -1;
    }
    return 0;
}
static void slotPowerCycle()
{
    phosphor::logging::log<phosphor::logging::level::INFO>(
        "Slot Power Cycle started\n");
    slotPowerOff();
    slotPowerCycleTimer.expires_after(
        std::chrono::milliseconds(TimerMap["SlotPowerCycleMs"]));
    slotPowerCycleTimer.async_wait([](const boost::system::error_code ec) {
        if (ec)
        {
            if (ec != boost::asio::error::operation_aborted)
            {
                std::string errMsg =
                    "Slot Power cycle timer async_wait failed: " + ec.message();
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
            }
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "Slot Power cycle timer canceled\n");
            return;
        }
        phosphor::logging::log<phosphor::logging::level::INFO>(
            "Slot Power cycle timer completed\n");
        slotPowerOn();
        phosphor::logging::log<phosphor::logging::level::INFO>(
            "Slot Power Cycle Completed\n");
    });
}
#endif
static void gracefulPowerOff()
{
    assertGPIOForMs(powerOutConfig, TimerMap["PowerPulseMs"]);
}

static void forcePowerOff()
{
    if (assertGPIOForMs(powerOutConfig, TimerMap["ForceOffPulseMs"]) < 0)
    {
        return;
    }

    // If the force off timer expires, then the power-button override failed
    gpioAssertTimer.async_wait([](const boost::system::error_code ec) {
        if (ec)
        {
            // operation_aborted is expected if timer is canceled before
            // completion.
            if (ec != boost::asio::error::operation_aborted)
            {
                std::string errMsg =
                    "Force power off async_wait failed: " + ec.message();
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
            }
            return;
        }

        phosphor::logging::log<phosphor::logging::level::INFO>(
            "Power-button override failed. Not sure what to do now.");
    });
}

static void reset()
{
    assertGPIOForMs(resetOutConfig, TimerMap["ResetPulseMs"]);
}

static void gracefulPowerOffTimerStart()
{
    phosphor::logging::log<phosphor::logging::level::INFO>(
        "Graceful power-off timer started");
    gracefulPowerOffTimer.expires_after(
        std::chrono::seconds(TimerMap["GracefulPowerOffS"]));
    gracefulPowerOffTimer.async_wait([](const boost::system::error_code ec) {
        if (ec)
        {
            // operation_aborted is expected if timer is canceled before
            // completion.
            if (ec != boost::asio::error::operation_aborted)
            {
                std::string errMsg =
                    "Graceful power-off async_wait failed: " + ec.message();
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
            }
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "Graceful power-off timer canceled");
            return;
        }
        phosphor::logging::log<phosphor::logging::level::INFO>(
            "Graceful power-off timer completed");
        sendPowerControlEvent(Event::gracefulPowerOffTimerExpired);
    });
}

static void powerCycleTimerStart()
{
    phosphor::logging::log<phosphor::logging::level::INFO>(
        "Power-cycle timer started");
    powerCycleTimer.expires_after(
        std::chrono::milliseconds(TimerMap["PowerCycleMs"]));
    powerCycleTimer.async_wait([](const boost::system::error_code ec) {
        if (ec)
        {
            // operation_aborted is expected if timer is canceled before
            // completion.
            if (ec != boost::asio::error::operation_aborted)
            {
                std::string errMsg =
                    "Power-cycle async_wait failed: " + ec.message();
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
            }
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "Power-cycle timer canceled");
            return;
        }
        phosphor::logging::log<phosphor::logging::level::INFO>(
            "Power-cycle timer completed");
        sendPowerControlEvent(Event::powerCycleTimerExpired);
    });
}

static void psPowerOKWatchdogTimerStart()
{
    phosphor::logging::log<phosphor::logging::level::INFO>(
        "power supply power OK watchdog timer started");
    psPowerOKWatchdogTimer.expires_after(
        std::chrono::milliseconds(TimerMap["PsPowerOKWatchdogMs"]));
    psPowerOKWatchdogTimer.async_wait([](const boost::system::error_code ec) {
        if (ec)
        {
            // operation_aborted is expected if timer is canceled before
            // completion.
            if (ec != boost::asio::error::operation_aborted)
            {
                std::string errMsg =
                    "power supply power OK watchdog async_wait failed: " +
                    ec.message();
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
            }
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "power supply power OK watchdog timer canceled");
            return;
        }
        phosphor::logging::log<phosphor::logging::level::INFO>(
            "power supply power OK watchdog timer expired");
        sendPowerControlEvent(Event::psPowerOKWatchdogTimerExpired);
    });
}

static void warmResetCheckTimerStart()
{
    phosphor::logging::log<phosphor::logging::level::INFO>(
        "Warm reset check timer started");
    warmResetCheckTimer.expires_after(
        std::chrono::milliseconds(TimerMap["WarmResetCheckMs"]));
    warmResetCheckTimer.async_wait([](const boost::system::error_code ec) {
        if (ec)
        {
            // operation_aborted is expected if timer is canceled before
            // completion.
            if (ec != boost::asio::error::operation_aborted)
            {
                std::string errMsg =
                    "Warm reset check async_wait failed: " + ec.message();
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
            }
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "Warm reset check timer canceled");
            return;
        }
        phosphor::logging::log<phosphor::logging::level::INFO>(
            "Warm reset check timer completed");
        sendPowerControlEvent(Event::warmResetDetected);
    });
}

static void pohCounterTimerStart()
{
    phosphor::logging::log<phosphor::logging::level::INFO>("POH timer started");
    // Set the time-out as 1 hour, to align with POH command in ipmid
    pohCounterTimer.expires_after(std::chrono::hours(1));
    pohCounterTimer.async_wait([](const boost::system::error_code& ec) {
        if (ec)
        {
            // operation_aborted is expected if timer is canceled before
            // completion.
            if (ec != boost::asio::error::operation_aborted)
            {
                std::string errMsg =
                    "POH timer async_wait failed: " + ec.message();
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
            }
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "POH timer canceled");
            return;
        }

        if (getHostState(powerState) !=
            "xyz.openbmc_project.State.Host.HostState.Running")
        {
            return;
        }

        conn->async_method_call(
            [](boost::system::error_code ec,
               const std::variant<uint32_t>& pohCounterProperty) {
                if (ec)
                {
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "error to get poh counter");
                    return;
                }
                const uint32_t* pohCounter =
                    std::get_if<uint32_t>(&pohCounterProperty);
                if (pohCounter == nullptr)
                {
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "unable to read poh counter");
                    return;
                }

                conn->async_method_call(
                    [](boost::system::error_code ec) {
                        if (ec)
                        {
                            phosphor::logging::log<
                                phosphor::logging::level::INFO>(
                                "failed to set poh counter");
                        }
                    },
                    "xyz.openbmc_project.Settings",
                    "/xyz/openbmc_project/state/chassis0",
                    "org.freedesktop.DBus.Properties", "Set",
                    "xyz.openbmc_project.State.PowerOnHours", "POHCounter",
                    std::variant<uint32_t>(*pohCounter + 1));
            },
            "xyz.openbmc_project.Settings",
            "/xyz/openbmc_project/state/chassis0",
            "org.freedesktop.DBus.Properties", "Get",
            "xyz.openbmc_project.State.PowerOnHours", "POHCounter");

        pohCounterTimerStart();
    });
}

static void currentHostStateMonitor()
{
    if (getHostState(powerState) ==
        "xyz.openbmc_project.State.Host.HostState.Running")
    {
        pohCounterTimerStart();
        // Clear the restart cause set for the next restart
        clearRestartCause();
    }
    else
    {
        pohCounterTimer.cancel();
        // Set the restart cause set for this restart
        setRestartCause();
    }

    static auto match = sdbusplus::bus::match::match(
        *conn,
        "type='signal',member='PropertiesChanged', "
        "interface='org.freedesktop.DBus.Properties', "
        "arg0='xyz.openbmc_project.State.Host'",
        [](sdbusplus::message::message& message) {
            std::string intfName;
            std::map<std::string, std::variant<std::string>> properties;

            try
            {
                message.read(intfName, properties);
            }
            catch (const std::exception& e)
            {
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    "Unable to read host state");
                return;
            }
            if (properties.empty())
            {
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    "ERROR: Empty PropertiesChanged signal received");
                return;
            }

            // We only want to check for CurrentHostState
            if (properties.begin()->first != "CurrentHostState")
            {
                return;
            }
            std::string* currentHostState =
                std::get_if<std::string>(&(properties.begin()->second));
            if (currentHostState == nullptr)
            {
                std::string errMsg =
                    properties.begin()->first + " property invalid";
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
                return;
            }

            if (*currentHostState ==
                "xyz.openbmc_project.State.Host.HostState.Running")
            {
                pohCounterTimerStart();
                // Clear the restart cause set for the next restart
                clearRestartCause();
                sd_journal_send("MESSAGE=Host system DC power is on",
                                "PRIORITY=%i", LOG_INFO,
                                "REDFISH_MESSAGE_ID=%s",
                                "OpenBMC.0.1.DCPowerOn", NULL);
            }
            else
            {
                pohCounterTimer.cancel();
                // POST_COMPLETE GPIO event is not working in some platforms
                // when power state is changed to OFF. This resulted in
                // 'OperatingSystemState' to stay at 'Standby', even though
                // system is OFF. Set 'OperatingSystemState' to 'Inactive'
                // if HostState is trurned to OFF.
                osIface->set_property("OperatingSystemState",
                                      std::string("Inactive"));

                // Set the restart cause set for this restart
                setRestartCause();
                resetACBootProperty();
                sd_journal_send("MESSAGE=Host system DC power is off",
                                "PRIORITY=%i", LOG_INFO,
                                "REDFISH_MESSAGE_ID=%s",
                                "OpenBMC.0.1.DCPowerOff", NULL);
            }
        });
}

static void sioPowerGoodWatchdogTimerStart()
{
    phosphor::logging::log<phosphor::logging::level::INFO>(
        "SIO power good watchdog timer started");
    sioPowerGoodWatchdogTimer.expires_after(
        std::chrono::milliseconds(TimerMap["SioPowerGoodWatchdogMs"]));
    sioPowerGoodWatchdogTimer.async_wait(
        [](const boost::system::error_code ec) {
            if (ec)
            {
                // operation_aborted is expected if timer is canceled before
                // completion.
                if (ec != boost::asio::error::operation_aborted)
                {
                    std::string errMsg =
                        "SIO power good watchdog async_wait failed: " +
                        ec.message();
                    phosphor::logging::log<phosphor::logging::level::ERR>(
                        errMsg.c_str());
                }
                phosphor::logging::log<phosphor::logging::level::INFO>(
                    "SIO power good watchdog timer canceled");
                return;
            }
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "SIO power good watchdog timer completed");
            sendPowerControlEvent(Event::sioPowerGoodWatchdogTimerExpired);
        });
}

static void powerStateOn(const Event event)
{
    logEvent(__FUNCTION__, event);
    switch (event)
    {
        case Event::psPowerOKDeAssert:
            setPowerState(PowerState::off);
            // DC power is unexpectedly lost, beep
            beep(beepPowerFail);
            break;
        case Event::sioS5Assert:
            setPowerState(PowerState::transitionToOff);
            addRestartCause(RestartCause::softReset);
            break;
#if USE_PLT_RST
        case Event::pltRstAssert:
#else
        case Event::postCompleteDeAssert:
#endif
            setPowerState(PowerState::checkForWarmReset);
            addRestartCause(RestartCause::softReset);
            warmResetCheckTimerStart();
            break;
        case Event::powerButtonPressed:
            setPowerState(PowerState::gracefulTransitionToOff);
            gracefulPowerOffTimerStart();
            break;
        case Event::powerOffRequest:
            setPowerState(PowerState::transitionToOff);
            forcePowerOff();
            break;
        case Event::gracefulPowerOffRequest:
            setPowerState(PowerState::gracefulTransitionToOff);
            gracefulPowerOffTimerStart();
            gracefulPowerOff();
            break;
        case Event::powerCycleRequest:
            setPowerState(PowerState::transitionToCycleOff);
            forcePowerOff();
            break;
        case Event::gracefulPowerCycleRequest:
            setPowerState(PowerState::gracefulTransitionToCycleOff);
            gracefulPowerOffTimerStart();
            gracefulPowerOff();
            break;
        case Event::resetRequest:
            reset();
            break;
        default:
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "No action taken.");
            break;
    }
}

static void powerStateWaitForPSPowerOK(const Event event)
{
    logEvent(__FUNCTION__, event);
    switch (event)
    {
        case Event::psPowerOKAssert:
        {
            // Cancel any GPIO assertions held during the transition
            gpioAssertTimer.cancel();
            psPowerOKWatchdogTimer.cancel();
            if (sioEnabled == true)
            {
                sioPowerGoodWatchdogTimerStart();
                setPowerState(PowerState::waitForSIOPowerGood);
            }
            else
            {
                setPowerState(PowerState::on);
            }
            break;
        }
        case Event::psPowerOKWatchdogTimerExpired:
            setPowerState(PowerState::off);
            psPowerOKFailedLog();
            break;
        case Event::sioPowerGoodAssert:
            psPowerOKWatchdogTimer.cancel();
            setPowerState(PowerState::on);
            break;
        default:
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "No action taken.");
            break;
    }
}

static void powerStateWaitForSIOPowerGood(const Event event)
{
    logEvent(__FUNCTION__, event);
    switch (event)
    {
        case Event::sioPowerGoodAssert:
            sioPowerGoodWatchdogTimer.cancel();
            setPowerState(PowerState::on);
            break;
        case Event::sioPowerGoodWatchdogTimerExpired:
            setPowerState(PowerState::off);
            systemPowerGoodFailedLog();
            break;
        default:
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "No action taken.");
            break;
    }
}

static void powerStateOff(const Event event)
{
    logEvent(__FUNCTION__, event);
    switch (event)
    {
        case Event::psPowerOKAssert:
        {
            if (sioEnabled == true)
            {
                sioPowerGoodWatchdogTimerStart();
                setPowerState(PowerState::waitForSIOPowerGood);
            }
            else
            {
                setPowerState(PowerState::on);
            }
            break;
        }
        case Event::sioS5DeAssert:
            setPowerState(PowerState::waitForPSPowerOK);
            break;
        case Event::sioPowerGoodAssert:
            setPowerState(PowerState::on);
            break;
        case Event::powerButtonPressed:
            psPowerOKWatchdogTimerStart();
            setPowerState(PowerState::waitForPSPowerOK);
            break;
        case Event::powerOnRequest:
            psPowerOKWatchdogTimerStart();
            setPowerState(PowerState::waitForPSPowerOK);
            powerOn();
            break;
        default:
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "No action taken.");
            break;
    }
}

static void powerStateTransitionToOff(const Event event)
{
    logEvent(__FUNCTION__, event);
    switch (event)
    {
        case Event::psPowerOKDeAssert:
            // Cancel any GPIO assertions held during the transition
            gpioAssertTimer.cancel();
            setPowerState(PowerState::off);
            break;
        default:
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "No action taken.");
            break;
    }
}

static void powerStateGracefulTransitionToOff(const Event event)
{
    logEvent(__FUNCTION__, event);
    switch (event)
    {
        case Event::psPowerOKDeAssert:
            gracefulPowerOffTimer.cancel();
            setPowerState(PowerState::off);
            break;
        case Event::gracefulPowerOffTimerExpired:
            setPowerState(PowerState::on);
            break;
        case Event::powerOffRequest:
            gracefulPowerOffTimer.cancel();
            setPowerState(PowerState::transitionToOff);
            forcePowerOff();
            break;
        case Event::powerCycleRequest:
            gracefulPowerOffTimer.cancel();
            setPowerState(PowerState::transitionToCycleOff);
            forcePowerOff();
            break;
        case Event::resetRequest:
            gracefulPowerOffTimer.cancel();
            setPowerState(PowerState::on);
            reset();
            break;
        default:
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "No action taken.");
            break;
    }
}

static void powerStateCycleOff(const Event event)
{
    logEvent(__FUNCTION__, event);
    switch (event)
    {
        case Event::psPowerOKAssert:
        {
            powerCycleTimer.cancel();
            if (sioEnabled == true)
            {
                sioPowerGoodWatchdogTimerStart();
                setPowerState(PowerState::waitForSIOPowerGood);
            }
            else
            {
                setPowerState(PowerState::on);
            }
            break;
        }
        case Event::sioS5DeAssert:
            powerCycleTimer.cancel();
            setPowerState(PowerState::waitForPSPowerOK);
            break;
        case Event::powerButtonPressed:
            powerCycleTimer.cancel();
            psPowerOKWatchdogTimerStart();
            setPowerState(PowerState::waitForPSPowerOK);
            break;
        case Event::powerCycleTimerExpired:
            psPowerOKWatchdogTimerStart();
            setPowerState(PowerState::waitForPSPowerOK);
            powerOn();
            break;
        default:
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "No action taken.");
            break;
    }
}

static void powerStateTransitionToCycleOff(const Event event)
{
    logEvent(__FUNCTION__, event);
    switch (event)
    {
        case Event::psPowerOKDeAssert:
            // Cancel any GPIO assertions held during the transition
            gpioAssertTimer.cancel();
            setPowerState(PowerState::cycleOff);
            powerCycleTimerStart();
            break;
        default:
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "No action taken.");
            break;
    }
}

static void powerStateGracefulTransitionToCycleOff(const Event event)
{
    logEvent(__FUNCTION__, event);
    switch (event)
    {
        case Event::psPowerOKDeAssert:
            gracefulPowerOffTimer.cancel();
            setPowerState(PowerState::cycleOff);
            powerCycleTimerStart();
            break;
        case Event::gracefulPowerOffTimerExpired:
            setPowerState(PowerState::on);
            break;
        case Event::powerOffRequest:
            gracefulPowerOffTimer.cancel();
            setPowerState(PowerState::transitionToOff);
            forcePowerOff();
            break;
        case Event::powerCycleRequest:
            gracefulPowerOffTimer.cancel();
            setPowerState(PowerState::transitionToCycleOff);
            forcePowerOff();
            break;
        case Event::resetRequest:
            gracefulPowerOffTimer.cancel();
            setPowerState(PowerState::on);
            reset();
            break;
        default:
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "No action taken.");
            break;
    }
}

static void powerStateCheckForWarmReset(const Event event)
{
    logEvent(__FUNCTION__, event);
    switch (event)
    {
        case Event::sioS5Assert:
            warmResetCheckTimer.cancel();
            setPowerState(PowerState::transitionToOff);
            break;
        case Event::warmResetDetected:
            setPowerState(PowerState::on);
            break;
        case Event::psPowerOKDeAssert:
            warmResetCheckTimer.cancel();
            setPowerState(PowerState::off);
            // DC power is unexpectedly lost, beep
            beep(beepPowerFail);
            break;
        default:
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "No action taken.");
            break;
    }
}

static void psPowerOKHandler(bool state)
{
    Event powerControlEvent =
        state ? Event::psPowerOKAssert : Event::psPowerOKDeAssert;
    sendPowerControlEvent(powerControlEvent);
}

static void sioPowerGoodHandler(bool state)
{
    Event powerControlEvent =
        state ? Event::sioPowerGoodAssert : Event::sioPowerGoodDeAssert;
    sendPowerControlEvent(powerControlEvent);
}

static void sioOnControlHandler(bool state)
{
    std::string logMsg =
        "SIO_ONCONTROL value changed: " + std::to_string(state);
    phosphor::logging::log<phosphor::logging::level::INFO>(logMsg.c_str());
}

static void sioS5Handler(bool state)
{
    Event powerControlEvent = state ? Event::sioS5DeAssert : Event::sioS5Assert;
    sendPowerControlEvent(powerControlEvent);
}

static void powerButtonHandler(bool state)
{
    powerButtonIface->set_property("ButtonPressed", !state);
    if (!state)
    {
        powerButtonPressLog();
        if (!powerButtonMask)
        {
            sendPowerControlEvent(Event::powerButtonPressed);
            addRestartCause(RestartCause::powerButton);
        }
        else
        {
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "power button press masked");
        }
    }
}

static void resetButtonHandler(bool state)
{
    resetButtonIface->set_property("ButtonPressed", !state);
    if (!state)
    {
        resetButtonPressLog();
        if (!resetButtonMask)
        {
            sendPowerControlEvent(Event::resetButtonPressed);
            addRestartCause(RestartCause::resetButton);
        }
        else
        {
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "reset button press masked");
        }
    }
}

#ifdef CHASSIS_SYSTEM_RESET
static constexpr auto systemdBusname = "org.freedesktop.systemd1";
static constexpr auto systemdPath = "/org/freedesktop/systemd1";
static constexpr auto systemdInterface = "org.freedesktop.systemd1.Manager";
static constexpr auto systemTargetName = "chassis-system-reset.target";

void systemReset()
{
    conn->async_method_call(
        [](boost::system::error_code ec) {
            if (ec)
            {
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    "Failed to call chassis system reset",
                    phosphor::logging::entry("ERR=%s", ec.message().c_str()));
            }
        },
        systemdBusname, systemdPath, systemdInterface, "StartUnit",
        systemTargetName, "replace");
}
#endif

static void nmiSetEnableProperty(bool value)
{
    conn->async_method_call(
        [](boost::system::error_code ec) {
            if (ec)
            {
                phosphor::logging::log<phosphor::logging::level::INFO>(
                    "failed to set NMI source");
            }
        },
        "xyz.openbmc_project.Settings",
        "/xyz/openbmc_project/Chassis/Control/NMISource",
        "org.freedesktop.DBus.Properties", "Set",
        "xyz.openbmc_project.Chassis.Control.NMISource", "Enabled",
        std::variant<bool>{value});
}

static void nmiReset(void)
{
    static constexpr const uint8_t value = 1;
    const static constexpr int nmiOutPulseTimeMs = 200;

    phosphor::logging::log<phosphor::logging::level::INFO>("NMI out action");
    nmiOutLine.set_value(value);
    std::string logMsg =
        nmiOutConfig.lineName + " set to " + std::to_string(value);
    phosphor::logging::log<phosphor::logging::level::INFO>(logMsg.c_str());
    gpioAssertTimer.expires_after(std::chrono::milliseconds(nmiOutPulseTimeMs));
    gpioAssertTimer.async_wait([](const boost::system::error_code ec) {
        // restore the NMI_OUT GPIO line back to the opposite value
        nmiOutLine.set_value(!value);
        std::string logMsg = nmiOutConfig.lineName + " released";
        phosphor::logging::log<phosphor::logging::level::INFO>(logMsg.c_str());
        if (ec)
        {
            // operation_aborted is expected if timer is canceled before
            // completion.
            if (ec != boost::asio::error::operation_aborted)
            {
                std::string errMsg = nmiOutConfig.lineName +
                                     " async_wait failed: " + ec.message();
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
            }
        }
    });
    // log to redfish
    nmiDiagIntLog();
    phosphor::logging::log<phosphor::logging::level::INFO>(
        "NMI out action completed");
    // reset Enable Property
    nmiSetEnableProperty(false);
}

static void nmiSourcePropertyMonitor(void)
{
    phosphor::logging::log<phosphor::logging::level::INFO>(
        "NMI Source Property Monitor");

    static std::unique_ptr<sdbusplus::bus::match::match> nmiSourceMatch =
        std::make_unique<sdbusplus::bus::match::match>(
            *conn,
            "type='signal',interface='org.freedesktop.DBus.Properties',"
            "member='PropertiesChanged',arg0namespace='xyz.openbmc_project."
            "Chassis.Control."
            "NMISource'",
            [](sdbusplus::message::message& msg) {
                std::string interfaceName;
                boost::container::flat_map<std::string,
                                           std::variant<bool, std::string>>
                    propertiesChanged;
                std::string state;
                bool value = true;
                try
                {
                    msg.read(interfaceName, propertiesChanged);
                    if (propertiesChanged.begin()->first == "Enabled")
                    {
                        value =
                            std::get<bool>(propertiesChanged.begin()->second);
                        std::string logMsg =
                            " NMI Enabled propertiesChanged value: " +
                            std::to_string(value);
                        phosphor::logging::log<phosphor::logging::level::INFO>(
                            logMsg.c_str());
                        nmiEnabled = value;
                        if (nmiEnabled)
                        {
                            nmiReset();
                        }
                    }
                }
                catch (const std::exception& e)
                {
                    phosphor::logging::log<phosphor::logging::level::ERR>(
                        "Unable to read NMI source");
                    return;
                }
            });
}

static void setNmiSource()
{
    conn->async_method_call(
        [](boost::system::error_code ec) {
            if (ec)
            {
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    "failed to set NMI source");
            }
        },
        "xyz.openbmc_project.Settings",
        "/xyz/openbmc_project/Chassis/Control/NMISource",
        "org.freedesktop.DBus.Properties", "Set",
        "xyz.openbmc_project.Chassis.Control.NMISource", "BMCSource",
        std::variant<std::string>{
            "xyz.openbmc_project.Chassis.Control.NMISource.BMCSourceSignal.FpBtn"});
    // set Enable Property
    nmiSetEnableProperty(true);
}

static void nmiButtonHandler(bool state)
{
    nmiButtonIface->set_property("ButtonPressed", !state);
    if (!state)
    {
        nmiButtonPressLog();
        if (nmiButtonMasked)
        {
            phosphor::logging::log<phosphor::logging::level::INFO>(
                "NMI button press masked");
        }
        else
        {
            setNmiSource();
        }
    }
}

static void idButtonHandler(bool state)
{
    idButtonIface->set_property("ButtonPressed", !state);
}

static void pltRstHandler(bool pltRst)
{
    if (pltRst)
    {
        sendPowerControlEvent(Event::pltRstDeAssert);
    }
    else
    {
        sendPowerControlEvent(Event::pltRstAssert);
    }
}

static void hostMiscHandler(sdbusplus::message::message& msg)
{
    std::string interfaceName;
    boost::container::flat_map<std::string, std::variant<bool>>
        propertiesChanged;
    bool pltRst;
    try
    {
        msg.read(interfaceName, propertiesChanged);
    }
    catch (const std::exception& e)
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "Unable to read Host Misc status");
        return;
    }
    if (propertiesChanged.empty())
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "ERROR: Empty Host.Misc PropertiesChanged signal received");
        return;
    }

    for (auto& [property, value] : propertiesChanged)
    {
        if (property == "ESpiPlatformReset")
        {
            bool* pltRst = std::get_if<bool>(&value);
            if (pltRst == nullptr)
            {
                std::string errMsg = property + " property invalid";
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
                return;
            }
            pltRstHandler(*pltRst);
        }
    }
}

static void postCompleteHandler(bool state)
{
    if (!state)
    {
        sendPowerControlEvent(Event::postCompleteAssert);
        osIface->set_property("OperatingSystemState", std::string("Standby"));
    }
    else
    {
        sendPowerControlEvent(Event::postCompleteDeAssert);
        osIface->set_property("OperatingSystemState", std::string("Inactive"));
    }
}

static int loadConfigValues()
{
    const std::string configFilePath =
        "/usr/share/x86-power-control/power-config-host" + power_control::node +
        ".json";
    std::ifstream configFile(configFilePath.c_str());
    if (!configFile.is_open())
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "loadConfigValues : Cannot open config path");
        return -1;
    }
    auto jsonData = nlohmann::json::parse(configFile, nullptr, true, true);

    if (jsonData.is_discarded())
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "Power config readings JSON parser failure");
        return -1;
    }
    auto gpios = jsonData["gpio_configs"];
    auto timers = jsonData["timing_configs"];

    ConfigData* tempGpioData;

    for (nlohmann::json& gpioConfig : gpios)
    {
        if (!gpioConfig.contains("Name"))
        {
            phosphor::logging::log<phosphor::logging::level::ERR>(
                "The 'Name' field must be defined in Json file");
            return -1;
        }

        // Iterate through the powersignal map to check if the gpio json config
        // entry is valid
        std::string gpioName = gpioConfig["Name"];
        auto signalMapIter = powerSignalMap.find(gpioName);
        if (signalMapIter == powerSignalMap.end())
        {
            std::string errMsg = "Undefined Name  : " + gpioName;
            phosphor::logging::log<phosphor::logging::level::ERR>(
                errMsg.c_str());
            return -1;
        }

        // assign the power signal name to the corresponding structure reference
        // from map then fillup the structure with coressponding json config
        // value
        tempGpioData = signalMapIter->second;
        tempGpioData->name = gpioName;

        if (!gpioConfig.contains("Type"))
        {
            phosphor::logging::log<phosphor::logging::level::ERR>(
                "The \'Type\' field must be defined in Json file");
            return -1;
        }

        std::string signalType = gpioConfig["Type"];
        if (signalType == "GPIO")
        {
            tempGpioData->type = ConfigType::GPIO;
        }
        else if (signalType == "DBUS")
        {
            tempGpioData->type = ConfigType::DBUS;
        }
        else
        {
            std::string errMsg = "Undefined Type : " + signalType;
            phosphor::logging::log<phosphor::logging::level::ERR>(
                errMsg.c_str());
            return -1;
        }

        if (tempGpioData->type == ConfigType::GPIO)
        {
            if (gpioConfig.contains("LineName"))
            {
                tempGpioData->lineName = gpioConfig["LineName"];
            }
            else
            {
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    "The \'LineName\' field must be defined for GPIO configuration");
                return -1;
            }
            if (gpioConfig.contains("Polarity"))
            {
                std::string polarity = gpioConfig["Polarity"];
                if (polarity == "ActiveLow")
                {
                    tempGpioData->polarity = false;
                }
                else if (polarity == "ActiveHigh")
                {
                    tempGpioData->polarity = true;
                }
                else
                {
                    std::string errMsg =
                        "Polarity defined but not properly setup. Please only ActiveHigh or ActiveLow. Currently set to " +
                        polarity;
                    phosphor::logging::log<phosphor::logging::level::ERR>(
                        errMsg.c_str());
                    return -1;
                }
            }
            else
            {
                std::string errMsg =
                    "Polarity field not found for " + tempGpioData->lineName;
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    errMsg.c_str());
                return -1;
            }
        }
        else
        {
            // if dbus based gpio config is defined read and update the dbus
            // params corresponding to the gpio config instance
            for (auto& [key, dbusParamName] : dbusParams)
            {
                if (!gpioConfig.contains(dbusParamName))
                {
                    std::string errMsg =
                        "The " + dbusParamName +
                        "field must be defined for Dbus configuration ";
                    phosphor::logging::log<phosphor::logging::level::ERR>(
                        errMsg.c_str());
                    return -1;
                }
            }
            tempGpioData->dbusName =
                gpioConfig[dbusParams[DbusConfigType::name]];
            tempGpioData->path = gpioConfig[dbusParams[DbusConfigType::path]];
            tempGpioData->interface =
                gpioConfig[dbusParams[DbusConfigType::interface]];
            tempGpioData->lineName =
                gpioConfig[dbusParams[DbusConfigType::property]];
        }
    }

    // read and store the timer values from json config to Timer Map
    for (auto& [key, timerValue] : TimerMap)
    {
        if (timers.contains(key.c_str()))
        {
            timerValue = timers[key.c_str()];
        }
    }

    return 0;
}

static bool getDbusMsgGPIOState(sdbusplus::message::message& msg,
                                const std::string& lineName, bool& value)
{
    std::string thresholdInterface;
    std::string event;
    boost::container::flat_map<std::string, std::variant<bool>>
        propertiesChanged;
    try
    {
        msg.read(thresholdInterface, propertiesChanged);
        if (propertiesChanged.empty())
        {
            return false;
        }

        event = propertiesChanged.begin()->first;
        if (event.empty() || event != lineName)
        {
            return false;
        }

        value = std::get<bool>(propertiesChanged.begin()->second);
        return true;
    }
    catch (const std::exception& e)
    {
        std::string logmsg =
            "exception while reading dbus property: " + lineName;
        phosphor::logging::log<phosphor::logging::level::ERR>(logmsg.c_str());
        return false;
    }
}

static sdbusplus::bus::match::match
    dbusGPIOMatcher(const ConfigData& cfg, std::function<void(bool)> onMatch)
{
    auto pulseEventMatcherCallback =
        [&cfg, onMatch](sdbusplus::message::message& msg) {
            bool value = false;
            if (!getDbusMsgGPIOState(msg, cfg.lineName, value))
            {
                return;
            }
            onMatch(value);
        };

    return sdbusplus::bus::match::match(
        static_cast<sdbusplus::bus::bus&>(*conn),
        "type='signal',interface='org.freedesktop.DBus.Properties',member='"
        "PropertiesChanged',arg0='" +
            cfg.dbusName + "'",
        std::move(pulseEventMatcherCallback));
}

int getProperty(ConfigData& configData)
{
    auto method = conn->new_method_call(
        configData.dbusName.c_str(), configData.path.c_str(),
        "org.freedesktop.DBus.Properties", "Get");
    method.append(configData.interface.c_str(), configData.lineName.c_str());

    auto reply = conn->call(method);
    if (reply.is_method_error())
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "Error reading from Bus");
        return -1;
    }
    std::variant<int> resp;
    reply.read(resp);
    auto respValue = std::get_if<int>(&resp);
    if (!respValue)
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "Error reading response");
        return -1;
    }
    return (*respValue);
}
} // namespace power_control

int main(int argc, char* argv[])
{
    using namespace power_control;

    if (argc > 1)
    {
        node = argv[1];
    }
    std::string infoMsg =
        "Start Chassis power control service for host : " + node;
    phosphor::logging::log<phosphor::logging::level::INFO>(infoMsg.c_str());

    conn = std::make_shared<sdbusplus::asio::connection>(io);

    // Load GPIO's through json config file
    if (loadConfigValues() == -1)
    {
        std::string errMsg = "Host" + node + ": " + "Error in Parsing...";
        phosphor::logging::log<phosphor::logging::level::ERR>(errMsg.c_str());
    }
    /* Currently for single host based systems additional busname is added
    with "0" at the end of the name ex : xyz.openbmc_project.State.Host0.
    Going forward for single hosts the old bus name without zero numbering
    will be removed when all other applications adapted to the
    bus name with zero numbering (xyz.openbmc_project.State.Host0). */

    if (node == "0")
    {
        // Request all the dbus names
        conn->request_name(hostDbusName.c_str());
        conn->request_name(chassisDbusName.c_str());
        conn->request_name(osDbusName.c_str());
        conn->request_name(buttonDbusName.c_str());
        conn->request_name(nmiDbusName.c_str());
        conn->request_name(rstCauseDbusName.c_str());
    }

    hostDbusName += node;
    chassisDbusName += node;
    osDbusName += node;
    buttonDbusName += node;
    nmiDbusName += node;
    rstCauseDbusName += node;

    // Request all the dbus names
    conn->request_name(hostDbusName.c_str());
    conn->request_name(chassisDbusName.c_str());
    conn->request_name(osDbusName.c_str());
    conn->request_name(buttonDbusName.c_str());
    conn->request_name(nmiDbusName.c_str());
    conn->request_name(rstCauseDbusName.c_str());

    if (sioPwrGoodConfig.lineName.empty() ||
        sioOnControlConfig.lineName.empty() || sioS5Config.lineName.empty())
    {
        sioEnabled = false;
        phosphor::logging::log<phosphor::logging::level::INFO>(
            "SIO control GPIOs not defined, disable SIO support.");
    }

    // Request PS_PWROK GPIO events
    if (powerOkConfig.type == ConfigType::GPIO)
    {
        if (!requestGPIOEvents(powerOkConfig.lineName, psPowerOKHandler,
                               psPowerOKLine, psPowerOKEvent))
        {
            return -1;
        }
    }
    else if (powerOkConfig.type == ConfigType::DBUS)
    {

        static sdbusplus::bus::match::match powerOkEventMonitor =
            power_control::dbusGPIOMatcher(powerOkConfig, psPowerOKHandler);
    }
    else
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "PowerOk name should be configured from json config file");
        return -1;
    }

    if (sioEnabled == true)
    {
        // Request SIO_POWER_GOOD GPIO events
        if (sioPwrGoodConfig.type == ConfigType::GPIO)
        {
            if (!requestGPIOEvents(sioPwrGoodConfig.lineName,
                                   sioPowerGoodHandler, sioPowerGoodLine,
                                   sioPowerGoodEvent))
            {
                return -1;
            }
        }
        else if (sioPwrGoodConfig.type == ConfigType::DBUS)
        {
            static sdbusplus::bus::match::match sioPwrGoodEventMonitor =
                power_control::dbusGPIOMatcher(sioPwrGoodConfig,
                                               sioPowerGoodHandler);
        }
        else
        {
            phosphor::logging::log<phosphor::logging::level::ERR>(
                "sioPwrGood name should be configured from json config file");
            return -1;
        }

        // Request SIO_ONCONTROL GPIO events
        if (sioOnControlConfig.type == ConfigType::GPIO)
        {
            if (!requestGPIOEvents(sioOnControlConfig.lineName,
                                   sioOnControlHandler, sioOnControlLine,
                                   sioOnControlEvent))
            {
                return -1;
            }
        }
        else if (sioOnControlConfig.type == ConfigType::DBUS)
        {
            static sdbusplus::bus::match::match sioOnControlEventMonitor =
                power_control::dbusGPIOMatcher(sioOnControlConfig,
                                               sioOnControlHandler);
        }
        else
        {
            phosphor::logging::log<phosphor::logging::level::ERR>(
                "sioOnControl name should be configured from jsonconfig file\n");
            return -1;
        }

        // Request SIO_S5 GPIO events
        if (sioS5Config.type == ConfigType::GPIO)
        {
            if (!requestGPIOEvents(sioS5Config.lineName, sioS5Handler,
                                   sioS5Line, sioS5Event))
            {
                return -1;
            }
        }
        else if (sioS5Config.type == ConfigType::DBUS)
        {
            static sdbusplus::bus::match::match sioS5EventMonitor =
                power_control::dbusGPIOMatcher(sioS5Config, sioS5Handler);
        }
        else
        {
            phosphor::logging::log<phosphor::logging::level::ERR>(
                "sioS5 name should be configured from json config file");
            return -1;
        }
    }

    // Request POWER_BUTTON GPIO events
    if (powerButtonConfig.type == ConfigType::GPIO)
    {
        if (!requestGPIOEvents(powerButtonConfig.lineName, powerButtonHandler,
                               powerButtonLine, powerButtonEvent))
        {
            return -1;
        }
    }
    else if (powerButtonConfig.type == ConfigType::DBUS)
    {
        static sdbusplus::bus::match::match powerButtonEventMonitor =
            power_control::dbusGPIOMatcher(powerButtonConfig,
                                           powerButtonHandler);
    }

    // Request RESET_BUTTON GPIO events
    if (resetButtonConfig.type == ConfigType::GPIO)
    {
        if (!requestGPIOEvents(resetButtonConfig.lineName, resetButtonHandler,
                               resetButtonLine, resetButtonEvent))
        {
            return -1;
        }
    }
    else if (resetButtonConfig.type == ConfigType::DBUS)
    {
        static sdbusplus::bus::match::match resetButtonEventMonitor =
            power_control::dbusGPIOMatcher(resetButtonConfig,
                                           resetButtonHandler);
    }

    // Request NMI_BUTTON GPIO events
    if (nmiButtonConfig.type == ConfigType::GPIO)
    {
        if (!nmiButtonConfig.lineName.empty())
        {
            requestGPIOEvents(nmiButtonConfig.lineName, nmiButtonHandler,
                              nmiButtonLine, nmiButtonEvent);
        }
    }
    else if (nmiButtonConfig.type == ConfigType::DBUS)
    {
        static sdbusplus::bus::match::match nmiButtonEventMonitor =
            power_control::dbusGPIOMatcher(nmiButtonConfig, nmiButtonHandler);
    }

    // Request ID_BUTTON GPIO events
    if (idButtonConfig.type == ConfigType::GPIO)
    {
        if (!idButtonConfig.lineName.empty())
        {
            requestGPIOEvents(idButtonConfig.lineName, idButtonHandler,
                              idButtonLine, idButtonEvent);
        }
    }
    else if (idButtonConfig.type == ConfigType::DBUS)
    {
        static sdbusplus::bus::match::match idButtonEventMonitor =
            power_control::dbusGPIOMatcher(idButtonConfig, idButtonHandler);
    }

#ifdef USE_PLT_RST
    sdbusplus::bus::match::match pltRstMatch(
        *conn,
        "type='signal',interface='org.freedesktop.DBus.Properties',member='"
        "PropertiesChanged',arg0='xyz.openbmc_project.State.Host.Misc'",
        hostMiscHandler);
#endif

    // Request POST_COMPLETE GPIO events
    if (postCompleteConfig.type == ConfigType::GPIO)
    {
        if (!requestGPIOEvents(postCompleteConfig.lineName, postCompleteHandler,
                               postCompleteLine, postCompleteEvent))
        {
            return -1;
        }
    }
    else if (postCompleteConfig.type == ConfigType::DBUS)
    {
        static sdbusplus::bus::match::match postCompleteEventMonitor =
            power_control::dbusGPIOMatcher(postCompleteConfig,
                                           postCompleteHandler);
    }
    else
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "postComplete name should be configured from json config file");
        return -1;
    }

    // initialize NMI_OUT GPIO.
    if (!nmiOutConfig.lineName.empty())
    {
        setGPIOOutput(nmiOutConfig.lineName, 0, nmiOutLine);
    }

    // Initialize POWER_OUT and RESET_OUT GPIO.
    gpiod::line line;
    if (!powerOutConfig.lineName.empty())
    {
        if (!setGPIOOutput(powerOutConfig.lineName, !powerOutConfig.polarity,
                           line))
        {
            return -1;
        }
    }
    else
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "powerOut name should be configured from json config file");
        return -1;
    }

    if (!resetOutConfig.lineName.empty())
    {
        if (!setGPIOOutput(resetOutConfig.lineName, !resetOutConfig.polarity,
                           line))
        {
            return -1;
        }
    }
    else
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "ResetOut name should be configured from json config file");
        return -1;
    }
    // Release line
    line.reset();

    // Initialize the power state
    powerState = PowerState::off;
    // Check power good

    if (powerOkConfig.type == ConfigType::GPIO)
    {
        if (psPowerOKLine.get_value() > 0 ||
            (sioEnabled &&
             (sioPowerGoodLine.get_value() == sioPwrGoodConfig.polarity)))
        {
            powerState = PowerState::on;
        }
    }
    else
    {
        if (getProperty(powerOkConfig))
        {
            powerState = PowerState::on;
        }
    }
    // Initialize the power state storage
    if (initializePowerStateStorage() < 0)
    {
        return -1;
    }

    // Check if we need to start the Power Restore policy
    powerRestorePolicyCheck();

    if (nmiOutLine)
        nmiSourcePropertyMonitor();

    phosphor::logging::log<phosphor::logging::level::INFO>(
        "Initializing power state. ");
    logStateTransition(powerState);

    // Power Control Service
    sdbusplus::asio::object_server hostServer =
        sdbusplus::asio::object_server(conn);

    // Power Control Interface
    hostIface =
        hostServer.add_interface("/xyz/openbmc_project/state/host" + node,
                                 "xyz.openbmc_project.State.Host");
    // Interface for IPMI/Redfish initiated host state transitions
    hostIface->register_property(
        "RequestedHostTransition",
        std::string("xyz.openbmc_project.State.Host.Transition.Off"),
        [](const std::string& requested, std::string& resp) {
            if (requested == "xyz.openbmc_project.State.Host.Transition.Off")
            {
                // if power button is masked, ignore this
                if (!powerButtonMask)
                {
                    sendPowerControlEvent(Event::gracefulPowerOffRequest);
                    addRestartCause(RestartCause::command);
                }
                else
                {
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "Power Button Masked.");
                    throw std::invalid_argument("Transition Request Masked");
                    return 0;
                }
            }
            else if (requested ==
                     "xyz.openbmc_project.State.Host.Transition.On")
            {
                // if power button is masked, ignore this
                if (!powerButtonMask)
                {
                    sendPowerControlEvent(Event::powerOnRequest);
                    addRestartCause(RestartCause::command);
                }
                else
                {
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "Power Button Masked.");
                    throw std::invalid_argument("Transition Request Masked");
                    return 0;
                }
            }
            else if (requested ==
                     "xyz.openbmc_project.State.Host.Transition.Reboot")
            {
                // if power button is masked, ignore this
                if (!powerButtonMask)
                {
                    sendPowerControlEvent(Event::powerCycleRequest);
                    addRestartCause(RestartCause::command);
                }
                else
                {
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "Power Button Masked.");
                    throw std::invalid_argument("Transition Request Masked");
                    return 0;
                }
            }
            else if (
                requested ==
                "xyz.openbmc_project.State.Host.Transition.GracefulWarmReboot")
            {
                // if reset button is masked, ignore this
                if (!resetButtonMask)
                {
                    sendPowerControlEvent(Event::gracefulPowerCycleRequest);
                    addRestartCause(RestartCause::command);
                }
                else
                {
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "Reset Button Masked.");
                    throw std::invalid_argument("Transition Request Masked");
                    return 0;
                }
            }
            else if (
                requested ==
                "xyz.openbmc_project.State.Host.Transition.ForceWarmReboot")
            {
                // if reset button is masked, ignore this
                if (!resetButtonMask)
                {
                    sendPowerControlEvent(Event::resetRequest);
                    addRestartCause(RestartCause::command);
                }
                else
                {
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "Reset Button Masked.");
                    throw std::invalid_argument("Transition Request Masked");
                    return 0;
                }
            }
            else
            {
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    "Unrecognized host state transition request.");
                throw std::invalid_argument("Unrecognized Transition Request");
                return 0;
            }
            resp = requested;
            return 1;
        });
    hostIface->register_property("CurrentHostState",
                                 std::string(getHostState(powerState)));

    hostIface->initialize();

    // Chassis Control Service
    sdbusplus::asio::object_server chassisServer =
        sdbusplus::asio::object_server(conn);

    // Chassis Control Interface
    chassisIface =
        chassisServer.add_interface("/xyz/openbmc_project/state/chassis" + node,
                                    "xyz.openbmc_project.State.Chassis");

    chassisIface->register_property(
        "RequestedPowerTransition",
        std::string("xyz.openbmc_project.State.Chassis.Transition.Off"),
        [](const std::string& requested, std::string& resp) {
            if (requested == "xyz.openbmc_project.State.Chassis.Transition.Off")
            {
                // if power button is masked, ignore this
                if (!powerButtonMask)
                {
                    sendPowerControlEvent(Event::powerOffRequest);
                    addRestartCause(RestartCause::command);
                }
                else
                {
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "Power Button Masked.");
                    throw std::invalid_argument("Transition Request Masked");
                    return 0;
                }
            }
            else if (requested ==
                     "xyz.openbmc_project.State.Chassis.Transition.On")
            {
                // if power button is masked, ignore this
                if (!powerButtonMask)
                {
                    sendPowerControlEvent(Event::powerOnRequest);
                    addRestartCause(RestartCause::command);
                }
                else
                {
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "Power Button Masked.");
                    throw std::invalid_argument("Transition Request Masked");
                    return 0;
                }
            }
            else if (requested ==
                     "xyz.openbmc_project.State.Chassis.Transition.PowerCycle")
            {
                // if power button is masked, ignore this
                if (!powerButtonMask)
                {
                    sendPowerControlEvent(Event::powerCycleRequest);
                    addRestartCause(RestartCause::command);
                }
                else
                {
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "Power Button Masked.");
                    throw std::invalid_argument("Transition Request Masked");
                    return 0;
                }
            }
            else
            {
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    "Unrecognized chassis state transition request.");
                throw std::invalid_argument("Unrecognized Transition Request");
                return 0;
            }
            resp = requested;
            return 1;
        });
    chassisIface->register_property("CurrentPowerState",
                                    std::string(getChassisState(powerState)));
    chassisIface->register_property("LastStateChangeTime", getCurrentTimeMs());

    chassisIface->initialize();

#ifdef CHASSIS_SYSTEM_RESET
    // Chassis System Service
    sdbusplus::asio::object_server chassisSysServer =
        sdbusplus::asio::object_server(conn);

    // Chassis System Interface
    chassisSysIface = chassisSysServer.add_interface(
        "/xyz/openbmc_project/state/chassis_system0",
        "xyz.openbmc_project.State.Chassis");

    chassisSysIface->register_property(
        "RequestedPowerTransition",
        std::string("xyz.openbmc_project.State.Chassis.Transition.On"),
        [](const std::string& requested, std::string& resp) {
            if (requested ==
                "xyz.openbmc_project.State.Chassis.Transition.PowerCycle")
            {
                systemReset();
                addRestartCause(RestartCause::command);
            }
            else
            {
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    "Unrecognized chassis system state transition request.");
                throw std::invalid_argument("Unrecognized Transition Request");
                return 0;
            }
            resp = requested;
            return 1;
        });
    chassisSysIface->register_property(
        "CurrentPowerState", std::string(getChassisState(powerState)));
    chassisSysIface->register_property("LastStateChangeTime",
                                       getCurrentTimeMs());

    chassisSysIface->initialize();

    if (!slotPowerConfig.lineName.empty())
    {
        if (!setGPIOOutput(slotPowerConfig.lineName, 1, slotPowerLine))
        {
            return -1;
        }

        slotPowerState = SlotPowerState::off;
        if (slotPowerLine.get_value() > 0)
        {
            slotPowerState = SlotPowerState::on;
        }

        chassisSlotIface = chassisSysServer.add_interface(
            "/xyz/openbmc_project/state/chassis_system" + node,
            "xyz.openbmc_project.State.Chassis");
        chassisSlotIface->register_property(
            "RequestedPowerTransition",
            std::string("xyz.openbmc_project.State.Chassis.Transition.On"),
            [](const std::string& requested, std::string& resp) {
                if (requested ==
                    "xyz.openbmc_project.State.Chassis.Transition.On")
                {
                    slotPowerOn();
                }
                else if (requested ==
                         "xyz.openbmc_project.State.Chassis.Transition.Off")
                {
                    slotPowerOff();
                }
                else if (
                    requested ==
                    "xyz.openbmc_project.State.Chassis.Transition.PowerCycle")
                {
                    slotPowerCycle();
                }
                else
                {
                    phosphor::logging::log<phosphor::logging::level::ERR>(
                        "Unrecognized chassis system state transition request.\n");
                    throw std::invalid_argument(
                        "Unrecognized Transition Request");
                    return 0;
                }
                resp = requested;
                return 1;
            });
        chassisSlotIface->register_property(
            "CurrentPowerState", std::string(getSlotState(slotPowerState)));
        chassisSlotIface->register_property("LastStateChangeTime",
                                            getCurrentTimeMs());
        chassisSlotIface->initialize();
    }
#endif
    // Buttons Service
    sdbusplus::asio::object_server buttonsServer =
        sdbusplus::asio::object_server(conn);

    if (!powerButtonConfig.lineName.empty())
    {
        // Power Button Interface
        power_control::powerButtonIface = buttonsServer.add_interface(
            "/xyz/openbmc_project/chassis/buttons/power",
            "xyz.openbmc_project.Chassis.Buttons");

        powerButtonIface->register_property(
            "ButtonMasked", false, [](const bool requested, bool& current) {
                if (requested)
                {
                    if (powerButtonMask)
                    {
                        return 1;
                    }
                    if (!setGPIOOutput(powerOutConfig.lineName,
                                       !powerOutConfig.polarity,
                                       powerButtonMask))
                    {
                        throw std::runtime_error("Failed to request GPIO");
                        return 0;
                    }
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "Power Button Masked.");
                }
                else
                {
                    if (!powerButtonMask)
                    {
                        return 1;
                    }
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "Power Button Un-masked");
                    powerButtonMask.reset();
                }
                // Update the mask setting
                current = requested;
                return 1;
            });

        // Check power button state
        bool powerButtonPressed;
        if (powerButtonConfig.type == ConfigType::GPIO)
        {
            powerButtonPressed = powerButtonLine.get_value() == 0;
        }
        else
        {
            powerButtonPressed = getProperty(powerButtonConfig) == 0;
        }

        powerButtonIface->register_property("ButtonPressed",
                                            powerButtonPressed);

        powerButtonIface->initialize();
    }

    if (!resetButtonConfig.lineName.empty())
    {
        // Reset Button Interface

        resetButtonIface = buttonsServer.add_interface(
            "/xyz/openbmc_project/chassis/buttons/reset",
            "xyz.openbmc_project.Chassis.Buttons");

        resetButtonIface->register_property(
            "ButtonMasked", false, [](const bool requested, bool& current) {
                if (requested)
                {
                    if (resetButtonMask)
                    {
                        return 1;
                    }
                    if (!setGPIOOutput(resetOutConfig.lineName,
                                       !resetOutConfig.polarity,
                                       resetButtonMask))
                    {
                        throw std::runtime_error("Failed to request GPIO");
                        return 0;
                    }
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "Reset Button Masked.");
                }
                else
                {
                    if (!resetButtonMask)
                    {
                        return 1;
                    }
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "Reset Button Un-masked");
                    resetButtonMask.reset();
                }
                // Update the mask setting
                current = requested;
                return 1;
            });

        // Check reset button state
        bool resetButtonPressed;
        if (resetButtonConfig.type == ConfigType::GPIO)
        {
            resetButtonPressed = resetButtonLine.get_value() == 0;
        }
        else
        {
            resetButtonPressed = getProperty(resetButtonConfig) == 0;
        }

        resetButtonIface->register_property("ButtonPressed",
                                            resetButtonPressed);

        resetButtonIface->initialize();
    }

    if (nmiButtonLine)
    {
        // NMI Button Interface
        nmiButtonIface = buttonsServer.add_interface(
            "/xyz/openbmc_project/chassis/buttons/nmi",
            "xyz.openbmc_project.Chassis.Buttons");

        nmiButtonIface->register_property(
            "ButtonMasked", false, [](const bool requested, bool& current) {
                if (nmiButtonMasked == requested)
                {
                    // NMI button mask is already set as requested, so no change
                    return 1;
                }
                if (requested)
                {
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "NMI Button Masked.");
                    nmiButtonMasked = true;
                }
                else
                {
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "NMI Button Un-masked.");
                    nmiButtonMasked = false;
                }
                // Update the mask setting
                current = nmiButtonMasked;
                return 1;
            });

        // Check NMI button state
        bool nmiButtonPressed;
        if (nmiButtonConfig.type == ConfigType::GPIO)
        {
            nmiButtonPressed = nmiButtonLine.get_value() == 0;
        }
        else
        {
            nmiButtonPressed = getProperty(nmiButtonConfig) == 0;
        }

        nmiButtonIface->register_property("ButtonPressed", nmiButtonPressed);

        nmiButtonIface->initialize();
    }

    if (nmiOutLine)
    {
        // NMI out Service
        sdbusplus::asio::object_server nmiOutServer =
            sdbusplus::asio::object_server(conn);

        // NMI out Interface
        nmiOutIface = nmiOutServer.add_interface(
            "/xyz/openbmc_project/control/host" + node + "/nmi",
            "xyz.openbmc_project.Control.Host.NMI");
        nmiOutIface->register_method("NMI", nmiReset);
        nmiOutIface->initialize();
    }

    if (idButtonLine)
    {
        // ID Button Interface
        idButtonIface = buttonsServer.add_interface(
            "/xyz/openbmc_project/chassis/buttons/id",
            "xyz.openbmc_project.Chassis.Buttons");

        // Check ID button state
        bool idButtonPressed;
        if (idButtonConfig.type == ConfigType::GPIO)
        {
            idButtonPressed = idButtonLine.get_value() == 0;
        }
        else
        {
            idButtonPressed = getProperty(idButtonConfig) == 0;
        }

        idButtonIface->register_property("ButtonPressed", idButtonPressed);

        idButtonIface->initialize();
    }

    // OS State Service
    sdbusplus::asio::object_server osServer =
        sdbusplus::asio::object_server(conn);

    // OS State Interface
    osIface = osServer.add_interface(
        "/xyz/openbmc_project/state/os",
        "xyz.openbmc_project.State.OperatingSystem.Status");

    // Get the initial OS state based on POST complete
    //      0: Asserted, OS state is "Standby" (ready to boot)
    //      1: De-Asserted, OS state is "Inactive"
    std::string osState;
    if (postCompleteConfig.type == ConfigType::GPIO)
    {
        osState = postCompleteLine.get_value() > 0 ? "Inactive" : "Standby";
    }
    else
    {
        osState = getProperty(postCompleteConfig) > 0 ? "Inactive" : "Standby";
    }

    osIface->register_property("OperatingSystemState", std::string(osState));

    osIface->initialize();

    // Restart Cause Service
    sdbusplus::asio::object_server restartCauseServer =
        sdbusplus::asio::object_server(conn);

    // Restart Cause Interface
    restartCauseIface = restartCauseServer.add_interface(
        "/xyz/openbmc_project/control/host" + node + "/restart_cause",
        "xyz.openbmc_project.Control.Host.RestartCause");

    restartCauseIface->register_property(
        "RestartCause",
        std::string("xyz.openbmc_project.State.Host.RestartCause.Unknown"));

    restartCauseIface->register_property(
        "RequestedRestartCause",
        std::string("xyz.openbmc_project.State.Host.RestartCause.Unknown"),
        [](const std::string& requested, std::string& resp) {
            if (requested ==
                "xyz.openbmc_project.State.Host.RestartCause.WatchdogTimer")
            {
                addRestartCause(RestartCause::watchdog);
            }
            else
            {
                throw std::invalid_argument(
                    "Unrecognized RestartCause Request");
                return 0;
            }

            std::string logMsg = "RestartCause requested: " + requested;
            phosphor::logging::log<phosphor::logging::level::INFO>(
                logMsg.c_str());
            resp = requested;
            return 1;
        });

    restartCauseIface->initialize();

    currentHostStateMonitor();

    io.run();

    return 0;
}