diff --git a/README.md b/README.md
index b5df2fb..4b56bcb 100644
--- a/README.md
+++ b/README.md
@@ -1,8 +1,9 @@
 # X86 power control
 
 This repository contains an OpenBMC compliant implementation of power control
-for x86 servers.  It relies on a number of features to do its job.  It has
-several intentional design goals.
+for x86 servers. It relies on a number of features to do its job. It has several
+intentional design goals.
+
 1. The BMC should maintain the Host state machine internally, and be able to
    track state changes.
 2. The implementation should either give the requested power control result, or
@@ -11,19 +12,19 @@
    soft power on/off/cycle.
 
 This daemon has been successfully used on a variety of server platforms; it
-should be able to support platforms with power control GPIOs similar to those
-in its config file.
+should be able to support platforms with power control GPIOs similar to those in
+its config file.
 
 x86-power-control uses default json file (power-config-host0.json) for GPIO
-configuration.  However this can be customized by producing your own
+configuration. However this can be customized by producing your own
 power-config-host0.json file.
 
 Definitions can be configured by two type:
 
 1. GPIO
 
-For the platform having direct GPIO access can use the type GPIO and define
-like below.
+For the platform having direct GPIO access can use the type GPIO and define like
+below.
 
     {
         "Name" : "PostComplete",
@@ -46,25 +47,26 @@
     },
 
 x86-power-control will monitor the property change from the given DbusName and
-take appropriate action.  *define Property as a bool variable.
+take appropriate action. \*define Property as a bool variable.
 
-Caveats:
-This implementation does not currently implement the common targets that other
-implementations do.  There were several attempts to, but all ended in timing
-issues and boot inconsistencies during stress operations.
+Caveats: This implementation does not currently implement the common targets
+that other implementations do. There were several attempts to, but all ended in
+timing issues and boot inconsistencies during stress operations.
 
 ## Build Options
 
 #### chassis-system-reset
+
 Enable chassis system power reset to allow removing power and restoring back.
 
 #### use-plt-rst
+
 The POST Complete GPIO is usually held asserted by BIOS after POST complete and
-de-asserts on reset.  This de-assert behavior is currently used to detect warm
+de-asserts on reset. This de-assert behavior is currently used to detect warm
 resets.
 
 Some systems are adding support for a PLT_RST eSPI signal that can be used to
-more accurately detect warm resets.  When this option is enabled,
+more accurately detect warm resets. When this option is enabled,
 x86-power-control will use PLT_RST to detect warm resets instead of POST
 Complete.
 
diff --git a/config/power-config-host0.json b/config/power-config-host0.json
index ed91470..83e1059 100644
--- a/config/power-config-host0.json
+++ b/config/power-config-host0.json
@@ -1,87 +1,87 @@
 {
-  "gpio_configs":[
-    {
-        "Name" : "IdButton",
-        "LineName" : "ID_BUTTON",
-        "Type" : "GPIO",
-        "Polarity" : "ActiveLow"
-    },
-    {
-        "Name" : "NMIButton",
-        "LineName" : "NMI_BUTTON",
-        "Type" : "GPIO",
-        "Polarity" : "ActiveLow"
-    },
-    {
-        "Name" : "NMIOut",
-        "LineName" : "NMI_OUT",
-        "Type" : "GPIO",
-        "Polarity" : "ActiveHigh"
-    },
-    {
-        "Name" : "PostComplete",
-        "LineName" : "POST_COMPLETE",
-        "Type" : "GPIO",
-        "Polarity" : "ActiveLow"
-    },
-    {
-        "Name" : "PowerButton",
-        "LineName" : "POWER_BUTTON",
-        "Type" : "GPIO",
-        "Polarity" : "ActiveLow"
-    },
-    {
-        "Name" : "PowerOk",
-        "LineName" : "PS_PWROK",
-        "Type" : "GPIO",
-        "Polarity" : "ActiveHigh"
-    },
-    {
-        "Name" : "PowerOut",
-        "LineName" : "POWER_OUT",
-        "Type" : "GPIO",
-        "Polarity" : "ActiveLow"
-    },
-    {
-        "Name" : "ResetButton",
-        "LineName" : "RESET_BUTTON",
-        "Type" : "GPIO",
-        "Polarity" : "ActiveLow"
-    },
-    {
-        "Name" : "ResetOut",
-        "LineName" : "RESET_OUT",
-        "Type" : "GPIO",
-        "Polarity" : "ActiveLow"
-    },
-    {
-        "Name" : "SioOnControl",
-        "LineName" : "SIO_ONCONTROL",
-        "Type" : "GPIO",
-        "Polarity" : "ActiveLow"
-    },
-    {
-        "Name" : "SioPowerGood",
-        "LineName" : "SIO_POWER_GOOD",
-        "Type" : "GPIO",
-        "Polarity" : "ActiveHigh"
-    },
-    {
-        "Name" : "SIOS5",
-        "LineName" : "SIO_S5",
-        "Type" : "GPIO",
-        "Polarity" : "ActiveLow"
-    }
-],
-  "timing_configs":{
-      "PowerPulseMs": 200,
-      "ForceOffPulseMs": 15000,
-      "ResetPulseMs": 500,
-      "PowerCycleMs": 5000,
-      "SioPowerGoodWatchdogMs": 1000,
-      "PsPowerOKWatchdogMs": 8000,
-      "GracefulPowerOffS": 300,
-      "WarmResetCheckMs": 500,
-      "PowerOffSaveMs": 7000
+    "gpio_configs": [
+        {
+            "Name": "IdButton",
+            "LineName": "ID_BUTTON",
+            "Type": "GPIO",
+            "Polarity": "ActiveLow"
+        },
+        {
+            "Name": "NMIButton",
+            "LineName": "NMI_BUTTON",
+            "Type": "GPIO",
+            "Polarity": "ActiveLow"
+        },
+        {
+            "Name": "NMIOut",
+            "LineName": "NMI_OUT",
+            "Type": "GPIO",
+            "Polarity": "ActiveHigh"
+        },
+        {
+            "Name": "PostComplete",
+            "LineName": "POST_COMPLETE",
+            "Type": "GPIO",
+            "Polarity": "ActiveLow"
+        },
+        {
+            "Name": "PowerButton",
+            "LineName": "POWER_BUTTON",
+            "Type": "GPIO",
+            "Polarity": "ActiveLow"
+        },
+        {
+            "Name": "PowerOk",
+            "LineName": "PS_PWROK",
+            "Type": "GPIO",
+            "Polarity": "ActiveHigh"
+        },
+        {
+            "Name": "PowerOut",
+            "LineName": "POWER_OUT",
+            "Type": "GPIO",
+            "Polarity": "ActiveLow"
+        },
+        {
+            "Name": "ResetButton",
+            "LineName": "RESET_BUTTON",
+            "Type": "GPIO",
+            "Polarity": "ActiveLow"
+        },
+        {
+            "Name": "ResetOut",
+            "LineName": "RESET_OUT",
+            "Type": "GPIO",
+            "Polarity": "ActiveLow"
+        },
+        {
+            "Name": "SioOnControl",
+            "LineName": "SIO_ONCONTROL",
+            "Type": "GPIO",
+            "Polarity": "ActiveLow"
+        },
+        {
+            "Name": "SioPowerGood",
+            "LineName": "SIO_POWER_GOOD",
+            "Type": "GPIO",
+            "Polarity": "ActiveHigh"
+        },
+        {
+            "Name": "SIOS5",
+            "LineName": "SIO_S5",
+            "Type": "GPIO",
+            "Polarity": "ActiveLow"
+        }
+    ],
+    "timing_configs": {
+        "PowerPulseMs": 200,
+        "ForceOffPulseMs": 15000,
+        "ResetPulseMs": 500,
+        "PowerCycleMs": 5000,
+        "SioPowerGoodWatchdogMs": 1000,
+        "PsPowerOKWatchdogMs": 8000,
+        "GracefulPowerOffS": 300,
+        "WarmResetCheckMs": 500,
+        "PowerOffSaveMs": 7000
     }
 }