Bump hostboot stable version to latest hostboot
This is nominally to get the HBRT fix.
Abhishek Agarwal (1):
L1 Rev istep 0.(6-8,11,13,14),1.1,2.(1-13,15,18-20,22,26,27,30,32,34) V2
Adam Hale (1):
Memory Controller Axone initfiles - initial
Alvin Wang (9):
Update setup_fw_boot_config() to read out actual values from attributes
Update setup_fw_boot_config() to read out actual values from attributes
Added p9a_omi_train procedure
Adds p9a_omi_train procedure(START)
Adds exp_draminit_mc
Update setup_fw_boot_config() to read out actual values from attributes
Adds empty files for exp_draminit_mc and p9a_omi_train
Adds exp_draminit_mc
Reinstates exp_draminit_mc with change_addr_mux_sel fix
Andre Marin (16):
Add empty explorer "check_for_ready" procedure files
Implement exp_check_for_ready
Add DDIMM module functions into SPD facade
Add L1 procedures for p9a and makefiles
Rename exp procedures files to match FW doc
Add empty generic memory effective attr xml for HB to mirror
Port-over generic SPD attributes that shouldn't change per controller
Add empty HWPs, UTs, and makefiles needed for Axone
Add L1 procedures for p9a and makefiles
Add empty p9a unit test and axone_pre_data_engine files for HB mirroring
Add empty HWPs, UTs, and makefiles needed for Axone
Add L1 procedures for p9a and makefiles
Generalize set fields in pre_data_init
Add empty pos, c_str files to split dimm specialization
Add empty bulk_pwr and utils_to_throttle header files for HB mirror
Port-over generic SPD attributes that shouldn't change per controller
Anusha Reddy Rangareddygari (2):
FAPI_INF entering and exiting message updates
Update hardware procedure metadata
Anuwat Saetow (1):
Added initial copy of generic_memory_si_attributes.xml
Ben Gass (5):
Update p9a.omi_init.scom.initfile
Explorer registers and fields generated from dev
Adds initfile for Explorer
Adds initfile for Explorer
Back out p9a_10 engd that breaks the initcompiler.
Bill Hoffa (1):
HBBL LPC Error Checking
CHRISTINA L. GRAVES (6):
Adding in LPC functional reset to sbe_lpc_init
Adding in configurations for PNOR/LPC communication
Fixing order of setting clock muxes & functional reset & removing sim only scoms
p9_sbe_lpc_init fix with GPIO reset
Adding in LPC and OPB timeout values
Do the real LPC reset for DD2
Caleb Palmer (9):
PRD: Adjust row repair capture data size
PRD: PlatServices support for NVDIMM persistency lost msg
Update Bad Bits and Row Repair for new MSS attrs
Revert "PRD: Initial NVDIMM Support"
PRD: Add MCFIR to capture group for mem mirror FFDC
PRD: Explorer rule and makefile updates
PRD: MPIPL Make sure PRD is initialized in startScrub
PRD: NVDIMM isolation redesign
PRD: Adjust dram repairs capture data max size
Chris Cain (1):
HTMGT: Change OCC logs to info while recovery is still being attempted
Chris Steffen (2):
P9 Xbus/DMI CM Workaround
P9 Obus MNFG Errors Attribute Fix
Christian Geddes (21):
Unset CONFIG_FILE env var if in standalone environment
Make sure FIRDATA is filled in axone pnor, remove UVBWLIST section
Update simics to latest build for Axone simics bringup
Update OBUS PLL Bucket attribute getter with Axone EC levels
Add call to p9a_ocmb_enable to istep 10.4
Skip NPU scominit until ARTMISS register gets updated
Fix issues w/ axone updates to simics scripts
Disable Sync Test
Add EEPROM caching device op
Update i2c driver for OCMB chip
Fix tags in exp_omi_train attribute xml
Add expscom test cases
Add call to exp_check_for_ready to istep 10.4
Add new P9A hwp error xml path to fapi2 file generation makefile
Set simics xml to match simics model for OCMB port numbering
Update istep_mss modules makefile to generate mss accessors
Add new path in EEPROM device op to allow reading from new EECACHE
Update simics build and pull in Axone binary to pnor generation
Use shell command to look up CEC_TYPE
Add omi setup/training calls to istep 12
Update simics build to include p9a_omi_train_check fixes
Corey Swenson (2):
Use virtual address buffer to read mvpd rings
Remove call to retrieve data from a previous runtime crash
Dan Crowell (11):
Move libconsole into base image
Add missing implied include to populate_hbruntime.H
Add more agressive memory allocation calls
Add a couple useful traces to the PNOR build script
Use proper top-level include for fapi2 target
Handle partial-bad MCS logic correctly
Statically allocate work pages for PNOR Resource Provider
Add ATTR_ENABLED_OBUS_BRICKS
Adjust makefile directives for expscomtest
Modify PNOR load order in SBE update to avoid OOM condition
Method to execute testcases early in the boot
Daniel M. Crowell (1):
Revert "Enhance RAS for case where boot firmware image is too big to load"
Dean Sanner (1):
Find cpu struct directly in doorbell interrupt handler
Evan Lojewski (2):
Add additional 2133 and 1866 ps values for spd parsing.
Update to allow DDR4-SORDIMM modules to be used [3].
Greg Still (1):
PM: fix cable pull issue in clearing clock sync upon PM Complex Reset
Ilya Smirnov (4):
Secureboot: Enhanced Multinode Comm: Slave Node
Secureboot: Enhanced Multinode Comm: Master Node
Secureboot: Enhanced Multinode Comm: Quote Size Fix
Secureboot: Enhanced Multinode Comm: Add size of quote & signature to slv quote
Jennifer A. Stofer (3):
Revert "lpc_init: Correct LPC host controller timeout value"
Revert "Adds exp_draminit_mc"
Revert "Adds exp_draminit_mc"
Jenny Huynh (4):
HW477626 Dangerous Elk - Reapply for all CDD12+ risk levels
Axone core initfile update to match Nimbus DD23
Adjust PVR Version for Axone
Secure memory allocation and setup
Joachim Fenkes (9):
p9_sbe_lpc_init: Fix LPC bus LRESET for DD2
p9_sbe_lpc_init: Fix timeout setup
p9_sbe_lpc_init: Add final check for errors
p9_sbe_lpc_init: Improve reset
lpc_init: Correct LPC host controller timeout value
p9_sbe_lpc_init: Skip final error check for Fleetwood GA1
FAPI2: Multicast API 1/2: Platform-breaking changes
FAPI2: Multicast API 2/2: Introduce the actual multicast functions
p9_sbe_npll_setup: Enable spread spectrum before starting PLL
Joe McGill (3):
p9_query_mssinfo -- adjust total memory reporting
p9_query_mssinfo -- fill mirror_policy regardless of platform mirror support
allow option to enforce mirroring of all system memory
Li Meng (5):
Adds some BCW safe delay for LRDIMM
Adds workaround for LRDIMM to clear FIRs
Adds new algorithm for DWL
Adds RAS features to LRDIMM MRD_FINE and use fine_recorder class
Fixes LRDIMM training issue
Louis Stermole (15):
Add generic attribute accessor script and makefiles
Add p9a_mss_volt procedure
Add ATTR_MSS_MEM_MVPD_FWMS to generic xml and fix accessor
Fix 1-rank row repair case in p9c draminit_training and draminit_mc
Convert mss explorer and axone code to use attr accessors
Add generic attribute accessor script and makefiles
Add new MSS attributes for Axone
Add ATTR_MSS_MEM_MVPD_FWMS to generic xml and fix accessor
Convert mss explorer and axone code to use attr accessors
Add p9a_mss_volt procedure
Add new MSS attributes for Axone
Convert mss explorer and axone code to use attr accessors
Add p9a_mss_volt procedure
Add generic attribute accessor script and makefiles
Add new MSS attributes for Axone
Matt Derksen (4):
Manually garded targets incorrectly being resource recovered
Explorer_inband support: add response data buffer to getRSP
OpenPOWER support for native and compatibility mode for DD2.3
Framework for NVDIMM update
Matt Raybuck (3):
Updates to processMrw.pl to fix erroneous chiplet ids
Correct invalid HUID and chiplet id values for NPU targets
Better logging for Partial Good Issues (2/2)
Matthew Raybuck (1):
Move watchdog timer to prevent timeout
Mike Baiocchi (2):
Add Node Communications Transfer Protocol
Secureboot: Enable New Multinode Trustedboot Transfer
Nick Bofferding (3):
Support tool that can package UCD* flash images into a binary
Support reading UCD flash update LIDs
Enhance RAS for case where boot firmware image is too big to load
Prasad Bg Ranganath (4):
PPB:New attribute ATTR_PMCR_MOST_RECENT_MODE for PMCR request
HB:Cme fir attribute reset fix
PM HWP: Fix bug in stop clock procedure that effects mpipl
HWP:Cache stop clocks complete fix
Prem Shanker Jha (3):
VDM(Part 1): Introduced new members in CME and CPMR image headers
SMF: Populates unsecure HOMER with SC2 instruction.
PM HWP: Fixed error path bug pertaining to query STOP state.
Pretty Mariam Jacob (1):
Added Alink changes in attributes and initfiles
Raja Das (1):
Axone pibmem repair logic
Roland Veloz (2):
Create FAPI mapping function for DDIM SPD data
Added the HWP error XML file for the DDIM SPD data mapping function
Sampa Misra (1):
fix VINI RT HW LX keyword for Phyp
Soma BhanuTej (1):
Update p9a_10 engd - spy name changes
Stephen Glancy (10):
Adds blank files for EFD API
Fixes LRDIMM NTTM mode read timing for HW bug
Adds blank Explorer MMIO setup files
Adds explorer OMI training code
Updates MCA write and read timings
Adds p9a chip directory structure
Adds blank files for explorer training handler
Adds the explorer training response structure
Adds blank files for generic bad bits code
Adds DDIMM EFD decoder API
Sunil.Kumar (1):
Level 2 Procedure - p9_sbe_lpc_init
Thi Tran (1):
Change ATTR_MRW_ENHANCED_GROUPING_NO_MIRRORING name
Tsung Yeung (5):
NVDIMM SBE Support to Trigger CSAVE - xip_customize
Disable NVDIMM Trigger Before Draminit and Deassert DDR_RESETn During MPIPL
Adjust STR enter sequence to enable immediate entry
Disable maint address mode before rcd_load during NVDIMM post-restore
Enable mss_scrub on MPIPL if NVDIMM is configured
duchen (1):
Update FAPI2 functions to handle new template parms for multicast support
shlimeng (1):
Add new algorithm for MREP and error log
spashabk-in (2):
Introducing lpc utils source file
Move lpc_rw to a source file
xiaozq (1):
p9_query_mssinfo for single chip mss information query.
Signed-off-by: Stewart Smith <stewart@linux.ibm.com>
diff --git a/openpower/package/hostboot/Config.in b/openpower/package/hostboot/Config.in
index 020d019..2aadf0a 100644
--- a/openpower/package/hostboot/Config.in
+++ b/openpower/package/hostboot/Config.in
@@ -29,7 +29,7 @@
config BR2_HOSTBOOT_VERSION
string
default "37e67698be56632c6505990dc3375136494d2a67" if BR2_HOSTBOOT_LATEST_VERSION
- default "610ca55e285e2f0d7cabed6235deef82ee271627" if BR2_HOSTBOOT_STABLE_VERSION
+ default "37e67698be56632c6505990dc3375136494d2a67" if BR2_HOSTBOOT_STABLE_VERSION
default BR2_HOSTBOOT_CUSTOM_VERSION_VALUE \
if BR2_HOSTBOOT_CUSTOM_VERSION