diff --git a/openpower/configs/hostboot/everest.config b/openpower/configs/hostboot/everest.config
deleted file mode 100644
index 96b6953..0000000
--- a/openpower/configs/hostboot/everest.config
+++ /dev/null
@@ -1,93 +0,0 @@
-# The HIOMAP protocol is used to access PNOR
-unset SFC_IS_AST2500
-unset SFC_IS_AST2400
-set   PNORDD_IS_IPMI
-unset PNORDD_IS_SFC
-unset ALLOW_MICRON_PNOR
-unset ALLOW_MACRONIX_PNOR
-
-# VPD options - Enable EECACHE
-set MVPD_READ_FROM_HW
-set MVPD_WRITE_TO_HW
-unset MVPD_READ_FROM_PNOR
-unset MVPD_WRITE_TO_PNOR
-
-set DJVPD_READ_FROM_HW
-set DJVPD_WRITE_TO_HW
-unset DJVPD_READ_FROM_PNOR
-unset DJVPD_WRITE_TO_PNOR
-
-set MEMVPD_READ_FROM_HW
-set MEMVPD_WRITE_TO_HW
-unset MEMVPD_READ_FROM_PNOR
-unset MEMVPD_WRITE_TO_PNOR
-
-# PLDM will be read via PLDM which is not supported yet
-#set PVPD_READ_FROM_HW
-#set PVPD_WRITE_TO_HW
-#unset PVPD_READ_FROM_PNOR
-#unset PVPD_WRITE_TO_PNOR
-
-# gpio config
-set GPIODD
-unset PALMETTO_VDDR
-
-# Enable consecutive SBE updates
-set SBE_UPDATE_CONSECUTIVE
-unset SBE_UPDATE_INDEPENDENT
-unset SBE_UPDATE_SEQUENTIAL
-unset SBE_UPDATE_SIMULTANEOUS
-unset NO_SBE_UPDATES
-# NOTE: Aggressive LRU currently required to free enough memory for SBE updates
-set AGGRESSIVE_LRU
-
-#unset PCIE_HOTPLUG_CONTROLLER
-
-# turn on console output
-set CONSOLE
-
-set BMC_AST2500
-
-#set DISABLE_HOSTBOOT_RUNTIME
-
-# Compile in hostboot runtime PRD
-#unset HBRT_PRD
-
-# PNOR flags
-unset PNOR_TWO_SIDE_SUPPORT
-
-set BMC_BT_LPC_IPMI
-
-# Enable hardware access to the EEPROMs with a cache
-set SUPPORT_EEPROM_CACHING
-set SUPPORT_EEPROM_HWACCESS
-
-# set for trace debug to console
-unset CONSOLE_OUTPUT_TRACE
-
-# Output FFDC to console
-set CONSOLE_OUTPUT_FFDCDISPLAY
-
-# RTC TODO 248361
-# Remove some time before product ships
-set PRINT_SYSTEM_INFO
-
-# Terminate Hostboot when errors occur in manufacturing mode
-#   (relies on BMC to not trigger reboot)
-#unset HANG_ON_MFG_SRC_TERM
-
-set ENABLE_HDAT_IN_HOSTBOOT
-
-# Load lids via PLDM File IO
-unset LOAD_PHYP_FROM_BOOTKERNEL
-set LOAD_LIDS_VIA_PLDM
-
-# enable multi-chip
-unset FORCE_SINGLE_CHIP
-
-# Disable presence detection (workaround for Everest bug)
-unset PHYS_PRES_PWR_BUTTON
-unset KEY_CLEAR
-
-# Disable TOD redundancy (workaround for Everest bug)
-unset ENABLE_TOD_REDUNDANCY