diff --git a/openpower/configs/hostboot/mowgli.config b/openpower/configs/hostboot/mowgli.config
new file mode 100644
index 0000000..0202229
--- /dev/null
+++ b/openpower/configs/hostboot/mowgli.config
@@ -0,0 +1,76 @@
+# The BMC MBOX Protocol is used to access PNOR
+unset SFC_IS_AST2500
+unset SFC_IS_AST2400
+set   PNORDD_IS_BMCMBOX
+unset PNORDD_IS_SFC
+unset BMC_DOES_SFC_INIT
+unset SFC_IS_IBM_DPSS
+set   ALLOW_MICRON_PNOR
+set   ALLOW_MACRONIX_PNOR
+
+# VPD options.
+set MVPD_READ_FROM_HW
+set MVPD_WRITE_TO_HW
+set MVPD_READ_FROM_PNOR
+set MVPD_WRITE_TO_PNOR
+set DJVPD_READ_FROM_HW
+unset DJVPD_WRITE_TO_HW
+set DJVPD_READ_FROM_PNOR
+set DJVPD_WRITE_TO_PNOR
+set MEMVPD_READ_FROM_HW
+set MEMVPD_WRITE_TO_HW
+set MEMVPD_READ_FROM_PNOR
+set MEMVPD_WRITE_TO_PNOR
+set PVPD_READ_FROM_HW
+set PVPD_WRITE_TO_HW
+set PVPD_READ_FROM_PNOR
+set PVPD_WRITE_TO_PNOR
+unset CDIMM_FORMAT_FOR_CVPD
+
+# gpio config
+set GPIODD
+unset PALMETTO_VDDR
+
+# Enable Consecutive SBE Updates
+set   SBE_UPDATE_CONSECUTIVE
+unset SBE_UPDATE_INDEPENDENT
+unset SBE_UPDATE_SEQUENTIAL
+unset SBE_UPDATE_SIMULTANEOUS
+unset NO_SBE_UPDATES
+
+unset PCIE_HOTPLUG_CONTROLLER
+
+# turn on console output
+set CONSOLE
+set BMC_AST2500
+
+unset DISABLE_HOSTBOOT_RUNTIME
+
+# Compile in hostboot runtime PRD
+set HBRT_PRD
+
+# Compile in hb rt HTMGT : Load/Start OCC
+set HTMGT
+set START_OCC_DURING_BOOT
+unset CONSOLE_OUTPUT_OCC_COMM
+
+#PNOR flags
+unset PNOR_TWO_SIDE_SUPPORT
+
+set BMC_BT_LPC_IPMI
+
+# Enable IPLtime + Runtime Checktop Analysis
+set ENABLE_CHECKSTOP_ANALYSIS
+set IPLTIME_CHECKSTOP_ANALYSIS
+
+# set for trace debug to console
+unset CONSOLE_OUTPUT_TRACE
+set CONSOLE_OUTPUT_FFDCDISPLAY
+
+# SECUREBOOT && TPMDD
+set SECUREBOOT
+set TPMDD
+set TPM_NUVOTON
+
+# To Disable GUARD Features
+unset NO_GARD_SUPPORT