| commit | 2a8f68e1d90236899326ec407a7930431ae28125 | [log] [tgz] |
|---|---|---|
| author | Stewart Smith <stewart@linux.vnet.ibm.com> | Tue Jul 25 18:33:15 2017 +1000 |
| committer | Stewart Smith <stewart@linux.vnet.ibm.com> | Tue Jul 25 18:33:15 2017 +1000 |
| tree | ce3c87470cf091b5ae266bc3e2459dfaa55bea76 | |
| parent | 5bf9e18aa45497de568611efa5e11eab30ab722f [diff] |
skiboot 5.7 FINAL
Since 5.7-rc2:
Madhavan Srinivasan (1):
skiboot: Fix comment around OPAL_IMC_COUNTERS_ enum
Matt Brown (1):
core/pci: Fix mem-leak on fast-reboot
Michael Neuling (11):
hdat: Add missing newline to print
phb4: Force verbose EEH logging
phb4: Better logs why the slot didn't work
phb4: Change timeouts prints to error level
phb4: Fix endian of TLP headers print
phb4: Read PERST signal rather than assuming it's asserted
phb4: Simplify calling phb4_retry_state()
phb4: Remove retry on electrical link timeout
phb4: Add phb4_check_reg() to sanity check failures
phb4: Improve reset and link training timing
phb4: Add link training trace mode
Michael Tritz (1):
pflash option to retrieve PNOR partition flags
Oliver O'Halloran (5):
core/backtrace: Serialise printing backtraces
hdata/memory: Add memory reservations to the DT
hdata/memory: Add newlines to debug messages
mem_region: Check for no-map in reserved nodes
hdat/i2c: Fix array version check
Russell Currey (1):
phb4: Initialization sequence updates
Stewart Smith (10):
pflash: build with skiboot HOSTCFLAGS warnings
pflash: include ccan/list/list.c to be able to build -DDEBUG
gard: enable building with skiboot HOSTCFLAGS warnings
gard: enable building with -DDEBUG for ccan list
Makefile: gard/pflash targets for CI build with HOSTCFLAGS/HOSTGCOVFLAGS
gcov: properly handle gard and pflash code coverage
attrconst for tests
boot_tests: add PFLASH_TO_COPY for OpenBMC
travis: Add debian stretch and unstable
skiboot-5.7 release notes
Vasant Hegde (2):
platform/witherspoon: Enable eSEL logging
FSP/CONSOLE: Do not enable input irq in write path
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
The OpenPOWER firmware build process uses Buildroot to create a toolchain and build the various components of the PNOR firmware, including Hostboot, Skiboot, OCC, Petitboot etc.
Issues, Milestones, pull requests and code hosting is on GitHub: https://github.com/open-power/op-build
Mailing list: openpower-firmware@lists.ozlabs.org
Info/Subscribe: https://lists.ozlabs.org/listinfo/openpower-firmware
Archives: https://lists.ozlabs.org/pipermail/openpower-firmware/
To build an image for a Palmetto system:
git clone --recursive git@github.com:open-power/op-build.git cd op-build . op-build-env op-build palmetto_defconfig && op-build
There are also default configurations for other platforms in openpower/configs/ such as Habanero and Firestone.
Buildroot/op-build supports both native and cross-compilation - it will automatically download and build an appropriate toolchain as part of the build process, so you don't need to worry about setting up a cross-compiler. Cross-compiling from a x86-64 host is officially supported.
Install Ubuntu (>= 14.04) or Debian (>= 7.5) 64-bit.
Enable Universe (Ubuntu only):
sudo apt-get install software-properties-common sudo add-apt-repository universe
Install the packages necessary for the build:
sudo apt-get install cscope ctags libz-dev libexpat-dev \ python language-pack-en texinfo \ build-essential g++ git bison flex unzip \ libssl-dev libxml-simple-perl libxml-sax-perl libxml2-dev libxml2-utils xsltproc \ wget bc
Install Fedora 25 64-bit (older Fedora should also work).
Install the packages necessary for the build:
sudo dnf install gcc-c++ flex bison git ctags cscope expat-devel patch \ zlib-devel zlib-static texinfo perl-bignum "perl(XML::Simple)" \ "perl(YAML)" "perl(XML::SAX)" "perl(Fatal)" "perl(Thread::Queue)" \ "perl(Env)" "perl(XML::LibXML)" "perl(Digest::SHA1)" libxml2-devel \ which wget unzip tar cpio python bzip2 bc findutils ncurses-devel