commit	2b811a38e87cf40baded9964d8e01751f7b87209	[log] [tgz]
author	Stewart Smith <stewart@linux.ibm.com>	Fri Mar 08 13:07:02 2019 +1100
committer	Stewart Smith <stewart@linux.ibm.com>	Fri Mar 08 13:07:02 2019 +1100
tree	bde8dbd97a2f661181fd40dec3b29f43fa225780
parent	d57ee19625f3d0e0552f23ab07ef59a65e7cf552 [diff]

Skiboot v6.2-176-g261ca8e779e5

A big update since v6.2, close to what will become v6.3

Abhishek Goel (1):
      power-mgmt : occ : Add 'freq-domain-mask' DT property

Akshay Adiga (2):
      SLW: Remove Idle state support tor Power8 DD1
      SLW: Print verbose info on errors only

Alexey Kardashevskiy (5):
      cpufeatures: Always advertise POWER8NVL as DD2
      opal: Deprecate reading the PHB status
      hw/phb3/naples: Disable D-states
      npu2: Add XTS_BDF_MAP wildcard refcount
      npu2: Allow ATSD for LPAR other than 0

Andrew Donnellan (3):
      platforms/witherspoon: Make PCIe shared slot error message more informative
      config: Get rid of DEBUG_MALLOC
      config: Get rid of FAST_REBOOT_CLEARS_MEMORY

Andrew Jeffery (60):
      astbmc: Try IPMI HIOMAP for P8
      p8dtu: Enable HIOMAP support
      p8dtu: Configure BMC graphics
      pflash: Don't try update RO ToC
      libflash/test: Generate header dependencies for tests
      ffspart, libflash: Fix stack size warnings
      pflash: Increase stack frame size warning threshold
      gard: Fix warnings from gcc 8.2.0
      Makefile: Paper over gard and pflash coverage issues
      test-ipmi-hiomap: Add ability to delay some IPMI messages
      test-ipmi-hiomap: Dump unexpected IPMI messages
      test-ipmi-hiomap: Ensure the completion code is set
      test-ipmi-hiomap: Print some information on early scenario_exit()
      libflash/ipmi-hiomap: Fix leak of msg in callback
      libflash/ipmi-hiomap: Overhaul error handling
      libflash/ipmi-hiomap: Overhaul event handling
      libflash/ipmi-hiomap: Remove unused close handling
      libflash/ipmi-hiomap: Enforce message size for empty response
      test-ipmi-hiomap: Add protocol-persistent-error test
      test-ipmi-hiomap: Add read-one-block test
      test-ipmi-hiomap: Add read-two-blocks test
      test-ipmi-hiomap: Add event-before-read
      test-ipmi-hiomap: Add event-during-read test
      test-ipmi-hiomap: Add write-one-block test
      test-ipmi-hiomap: Add write-two-blocks test
      test-ipmi-hiomap: Add event-before-write test
      test-ipmi-hiomap: Add event-during-write test
      test-ipmi-hiomap: Add erase-one-block test
      test-ipmi-hiomap: Add erase-two-blocks test
      test-ipmi-hiomap: Add event-before-erase test
      test-ipmi-hiomap: Add event-during-erase
      test-ipmi-hiomap: Add bad-sequence test
      test-ipmi-hiomap: Add action-error test
      test-ipmi-hiomap: Add get-flash-info test
      test-ipmi-hiomap: Add get-info-error test
      test-ipmi-hiomap: Add get-flash-info-error test
      test-ipmi-hiomap: Add create-read-window-error test
      test-ipmi-hiomap: Add create-write-window-error test
      test-ipmi-hiomap: Add mark-dirty-error test
      test-ipmi-hiomap: Add flush-error test
      test-ipmi-hiomap: Add ack-error test
      test-ipmi-hiomap: Add erase-error test
      test-ipmi-hiomap: Add ack-malformed tests
      test-ipmi-hiomap: Add get-info-malformed tests
      test-ipmi-hiomap: Add get-flash-info-malformed tests
      test-ipmi-hiomap: Add create-read-window-malformed tests
      test-ipmi-hiomap: Add create-write-window-malformed tests
      test-ipmi-hiomap: Add mark-dirty-malformed tests
      test-ipmi-hiomap: Add flush-malformed tests
      test-ipmi-hiomap: Add erase-malformed tests
      test-ipmi-hiomap: Add protocol-recovery-failure-ack test
      test-ipmi-hiomap: Add protocol-recovery-failure-get-info test
      test-ipmi-hiomap: Add protocol-recovery-get-flash-info-failure test
      test-ipmi-hiomap: Add read-one-block-twice test
      test-ipmi-hiomap: Add write-one-block-twice test
      test-ipmi-hiomap: Add erase-one-block-twice test
      ast-io: Rework ast_sio_is_enabled() test sequence
      astbmc: Try IPMI HIOMAP for P8 (again)
      astbmc: Enable IPMI HIOMAP for AMI platforms
      zaius: Add BMC description

Deb McLemore (3):
      p9dsu: Fix p9dsu default variant
      p9dsu: Fix p9dsu slot tables
      p9dsu: Fix slot labels for p9dsu2u

Jeff Scheel (1):
      doc: Adjusting tags in release notes to eliminate global conflict for singlehtml builds

Joel Stanley (2):
      Revert "astbmc: Try IPMI HIOMAP for P8"
      Makefile: Check -Wno-stringop-truncation is supported

Mahesh Salgaonkar (3):
      opal/hmi: Fix double unlock of hmi lock in failure path.
      opal/hmi: Don't retry TOD recovery if it is already in failed state.
      opal/hmi: set a flag to inform OS that TOD/TB has failed.

Michael Neuling (1):
      xive: Make no_sync parameter affermative in __xive_set_irq_config()

Nicholas Piggin (19):
      phb4: remove POWER9N DD1 creset workaround
      xive: remove POWER9N DD1 NVT table size workaround
      Remove POWER9N DD1 support
      core/cpu: HID update race
      external/mambo: allow CPU targeting for most debug utils
      core/init: rename setup_reset_vector
      core/cpu: do not inline cpu_relax
      core/exceptions: save current MSR in exception frame
      asm/head: use HSRR exception registers in FIXUP_ENDIAN
      core/init: rearrange final boot steps
      core/fast-reboot: improve NMI handling during fast reset
      core/init: enable machine check on secondaries
      asm/head: provide asm support for interrupts to be returned from
      core/fast-reboot: fast reboot specific sreset patch
      asm/head: sreset handler remove FIXUP_ENDIAN
      core/exceptions: implement an exception handler for non-powersave sresets
      core/exceptions: allow recoverable sreset exceptions
      core/exceptions: implement support for MCE interrupts in powersave
      asm/head: move unnecessary code out of head

Oliver O'Halloran (11):
      phb4: Rework BDFN filtering in phb4_set_pe()
      phb4: Remove pointless NULL checks
      phb4: Eliminate p->rte_cache
      phb4: Eliminate peltv_cache
      phb4: Update some comments
      hdata/test: Fix up linux,sml-base property
      hdata/test: Add OP920 HDAT test data
      hdata/memory: Remove find_shared()
      hdata/memory: Add NVDIMM support
      hw/phb4: Fix indentation of brdgCtl
      platforms/zz: Re-enable LXVPD slot information parsing

Reza Arbab (17):
      Remove duplicate npu2-common.o from $(HW_OBJS)
      npu2: Remove dead code from npu2_cfg_write_bar()
      npu2: Remove unused npu2::bdf2pe_cache
      npu2: Remove unused npu2::lxive_cache
      npu2: Remove unused npu2_dev::procedure_data
      npu2: Remove unused npu2_dev_nvlink::vendor_cap
      npu2: Fix missing iteration in tce kill loop
      npu2: Remove redundant assignment to p->phb_nvlink.scan_map
      npu2: Replace open coded dt_find_by_name_addr()
      core/lock: Stop drop_my_locks() from always causing abort
      Add PVR_TYPE_P9P
      devicetree: Fix syntax error in power9-phb4.dts
      devicetree: Fix typo in power9-phb4.dts
      devicetree: Add nx node to power9-phb4.dts
      devicetree: Move power9-phb4.dts
      devicetree: Add p9-simics.dts
      devicetree: Add Makefile to build dtb binaries

Santosh Sivaraj (2):
      flash: Add support for async decompression
      imc/catalog: Decompress catalog asynchronously

Shilpasri G Bhat (1):
      powercap: occ: Fix the powercapping range allowed for user

Stewart Smith (20):
      qemu: bt device isn't always hanging off /
      sparse: Make tree 'constant is so big' warning clean
      zz: platform_ocapi can be static
      zaius: zaius_ocapi can be static
      doc: clarify OPAL_RTC_READ return values
      firmware-versions: Add test case for parsing VERSION
      pflash: Support encoding/decoding ECC'd partitions
      skiboot v6.2.1 release notes
      skiboot v6.0.17 release notes
      hw/test: generalise makefile
      doc: fix definition lists in opal-imc-counters
      sparse: symbol 'sbe_timer_lock' was not declared. Should it be static?
      sparse: symbol 'xive_buddy_lock/xive_vp_buddy' was not declared. Should it be static?
      sparse: symbol 'NPU2_PHY_*' was not declared. Should it be static?
      sparse: symbol 'procedure_*' was not declared. Should it be static?
      sparse: symbols in imc.c weren't declared, Should they be static?
      sparse: symbol '*bar*' was not declared. Should it be static?
      Don't use variable length arrays in exception code
      i2c: Fix sparse warnings for type assignment
      doc: s/stb_init()/secureboot_init()/ to match reality

Timothy Pearson (1):
      Retry link training at PCIe GEN1 if presence detected but training repeatedly failed

Vaibhav Jain (8):
      opal: Update opal_del_host_sync_notifier() to accept 'void *data'
      core/pci: Introduce a new pci_slot_op named completed_sm_run()
      capp/phb: Introduce 'struct capp' to hold capp related info in 'struct phb'
      phb4/capp: Update and re-factor phb4_set_capi_mode()
      capp/phb4: Force CAPP to PCIe mode during kernel shutdown
      capp/phb4: Introduce PHB4 flag, PHB4_CAPP_DISABLE to disable CAPP
      phb4/capp: Implement sequence to disable CAPP and enable fast-reset
      capp/phb4: Prevent HMI from getting triggered when disabling CAPP

Vasant Hegde (16):
      skiboot v6.0.15 release notes
      core/ipmi: Improve error message
      core/opal: Print PIR value in exit path
      skiboot v6.0.16 release notes
      ipmi/power: Fix system reboot issue
      hdata/i2c: Reduce severity of log message
      libflash/ecc: Fix compilation warning
      hw/bt: Fix message retry handler
      hw/bt: Add backend interface to disable ipmi message retry option
      hdata/memory: Fix warning message
      hdata/memory: Removed share-id property
      hw/bt: Introduce separate list for synchronous messages
      core/ipmi: Add ipmi sync messages to top of the list
      hw/bt: Do not disable ipmi message retry during OPAL boot
      skiboot v6.0.18 release notes
      skiboot v6.2.2 release notes

Signed-off-by: Stewart Smith <stewart@linux.ibm.com>

openpower/package/skiboot/Config.in[diff]

1 file changed

tree: bde8dbd97a2f661181fd40dec3b29f43fa225780

README.md

OpenPOWER Firmware Build Environment

The OpenPOWER firmware build process uses Buildroot to create a toolchain and build the various components of the PNOR firmware, including Hostboot, Skiboot, OCC, Petitboot etc.

Documentation

https://open-power.github.io/op-build/

See the doc/ directory for documentation source. Contributions are VERY welcome!

Development

Issues, Milestones, pull requests and code hosting is on GitHub: https://github.com/open-power/op-build

See CONTRIBUTING.md for howto contribute code.

Mailing list: openpower-firmware@lists.ozlabs.org
Info/Subscribe: https://lists.ozlabs.org/listinfo/openpower-firmware
Archives: https://lists.ozlabs.org/pipermail/openpower-firmware/

Building an image

To build an image for a Palmetto system:

git clone --recursive git@github.com:open-power/op-build.git
cd op-build
. op-build-env
op-build palmetto_defconfig && op-build

There are also default configurations for other platforms in openpower/configs/. Current POWER8 platforms include Habanero, Firestone, and Garrison. Current POWER9 platforms include Witherspoon, Boston (p9dsu), Romulus, and Zaius.

Buildroot/op-build supports both native and cross-compilation - it will automatically download and build an appropriate toolchain as part of the build process, so you don't need to worry about setting up a cross-compiler. Cross-compiling from a x86-64 host is officially supported.

Dependencies for 64-bit Ubuntu/Debian systems

Install Ubuntu (>= 14.04) or Debian (>= 7.5) 64-bit.

Enable Universe (Ubuntu only):

 sudo apt-get install software-properties-common
 sudo add-apt-repository universe

Install the packages necessary for the build:

 sudo apt-get install cscope ctags libz-dev libexpat-dev \
   python language-pack-en texinfo \
   build-essential g++ git bison flex unzip \
   libssl-dev libxml-simple-perl libxml-sax-perl libxml-parser-perl libxml2-dev libxml2-utils xsltproc \
   wget bc

Dependencies for 64-bit Fedora systems

Install Fedora 25 64-bit (older Fedora should also work).

Install the packages necessary for the build:

 sudo dnf install gcc-c++ flex bison git ctags cscope expat-devel patch \
   zlib-devel zlib-static texinfo perl-bignum "perl(XML::Simple)" \
   "perl(YAML)" "perl(XML::SAX)" "perl(Fatal)" "perl(Thread::Queue)" \
   "perl(Env)" "perl(XML::LibXML)" "perl(Digest::SHA1)" libxml2-devel \
   which wget unzip tar cpio python bzip2 bc findutils ncurses-devel