| commit | 2b87cd244a4e3123d075172f7c0c2beb707ba0b5 | [log] [tgz] |
|---|---|---|
| author | Stewart Smith <stewart@linux.vnet.ibm.com> | Tue Nov 14 17:49:51 2017 +1100 |
| committer | Stewart Smith <stewart@linux.vnet.ibm.com> | Tue Nov 14 17:49:51 2017 +1100 |
| tree | 0549fe72f11518d939f9a15688b4c8a14bd6d90c | |
| parent | cbac09a858a7c8773605ab1a36bd1ad1a576fa65 [diff] |
skiboot v5.9-21-g88bd3bc5e6f8
Adriana Kobylak (1):
pflash: Support for volatile flag
Benjamin Herrenschmidt (2):
xive: Update inits for DD2.0
xive: Fix ability to clear some EQ flags
Christophe Lombard (2):
capi: update ci store buffers and dma engines
capi: move the acknowledge of the HMI interrupt
Cyril Bur (2):
core/pcie-slots: Fix coverity possible NULL dereference
npu2: Remove side effects in assert() calls.
Guilherme G. Piccoli (1):
xive: Trivial fix for compilation error when enabling xive debug
Jeremy Kerr (1):
opal-prd: flush after logging to stdio in debug mode
Michael Neuling (1):
phb4: Update inits
Oliver O'Halloran (2):
asm/head: Loop after attn
p8-i2c: Don't write the watermark register at init
Reza Arbab (4):
npu2: hw-procedures: Enable low power mode
npu2: Add npu2_write_mask_4b()
npu2: hw-procedures: Add phy_rx_clock_sel()
npu2: hw-procedures: Refactor reset_ntl procedure
Russell Currey (1):
doc: Fix reference to overview in README
Stewart Smith (3):
Document fsp-ipl-params to sp-ipl-params
ffspart/pflash: fix tests for new VOLATILE flag
skiboot 5.9.1 release notes
Vasant Hegde (1):
hdata: Rename 'fsp-ipl-side' as 'sp-ipl-side'
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
The OpenPOWER firmware build process uses Buildroot to create a toolchain and build the various components of the PNOR firmware, including Hostboot, Skiboot, OCC, Petitboot etc.
Issues, Milestones, pull requests and code hosting is on GitHub: https://github.com/open-power/op-build
Mailing list: openpower-firmware@lists.ozlabs.org
Info/Subscribe: https://lists.ozlabs.org/listinfo/openpower-firmware
Archives: https://lists.ozlabs.org/pipermail/openpower-firmware/
To build an image for a Palmetto system:
git clone --recursive git@github.com:open-power/op-build.git cd op-build . op-build-env op-build palmetto_defconfig && op-build
There are also default configurations for other platforms in openpower/configs/ such as Habanero and Firestone.
Buildroot/op-build supports both native and cross-compilation - it will automatically download and build an appropriate toolchain as part of the build process, so you don't need to worry about setting up a cross-compiler. Cross-compiling from a x86-64 host is officially supported.
Install Ubuntu (>= 14.04) or Debian (>= 7.5) 64-bit.
Enable Universe (Ubuntu only):
sudo apt-get install software-properties-common sudo add-apt-repository universe
Install the packages necessary for the build:
sudo apt-get install cscope ctags libz-dev libexpat-dev \ python language-pack-en texinfo \ build-essential g++ git bison flex unzip \ libssl-dev libxml-simple-perl libxml-sax-perl libxml2-dev libxml2-utils xsltproc \ wget bc
Install Fedora 25 64-bit (older Fedora should also work).
Install the packages necessary for the build:
sudo dnf install gcc-c++ flex bison git ctags cscope expat-devel patch \ zlib-devel zlib-static texinfo perl-bignum "perl(XML::Simple)" \ "perl(YAML)" "perl(XML::SAX)" "perl(Fatal)" "perl(Thread::Queue)" \ "perl(Env)" "perl(XML::LibXML)" "perl(Digest::SHA1)" libxml2-devel \ which wget unzip tar cpio python bzip2 bc findutils ncurses-devel