| commit | b1c25d63d6ab0b958dd6ef41e414f12bf13ff6ab | [log] [tgz] |
|---|---|---|
| author | Stewart Smith <stewart@linux.ibm.com> | Tue Apr 10 16:23:08 2018 +1000 |
| committer | Stewart Smith <stewart@linux.ibm.com> | Tue Apr 10 22:18:26 2018 -0500 |
| tree | 4da55957f55e9a1370b18e594f2cdeb2088dcb08 | |
| parent | 9480007ff988740595e2f1943450976135cdf221 [diff] |
skiboot v5.11-30-gcb16e55a234b
Benjamin Herrenschmidt (2):
pcie-slot: Don't fail powering on an already on switch
phb4: Quieten and improve "Timeout waiting for electrical link"
Cyril Bur (20):
external/ffspart: Allow # comments in input file
libffs: Standardise ffs partition flags
external/pflash: Use ffs_entry_user_to_string() to standardise flag strings
libflash/libffs: Add setter for a partitions actual size
libflash/libffs: ffs_close() should use ffs_hdr_free()
external/ffspart: Remove side, order and backup options
libflash/libffs: Always add entries to the end of the TOC
libflash/libffs: Remove the 'sides' from the FFS TOC generation code
libflash/libffs: Remove backup partition from TOC generation code
libflash/libffs: Switch to storing header entries in an array
libflash/libffs: Refcount ffs entries
libflash/libffs: Allow caller to specifiy header partition
external/ffspart: Use new interface
libffs: Fix bad checks for partition overlap
external/ffspart: Improve error output
gitignore: Add stb test kernel files
libflash/ecc: Add functions to deal with unaligned ECC memcpy
libflash/ecc: Add helpers to align a position within an ecc buffer
libflash/blocklevel: Return region start from ecc_protected()
libflash/blocklevel: Make read/write be ECC agnostic for callers
Madhavan Srinivasan (2):
hw/imc: Check for pause_microcode_at_boot() return status
hw/imc: Add support to load imc catalog lid file
Oliver O'Halloran (1):
core/pci: Document some stuff
Philippe Bergheaud (2):
phb4: set TVT1 for tunneled operations in capi mode
phb4: Do not set the PBCQ Tunnel BAR register when enabling capi mode.
Reza Arbab (1):
npu2: Move NPU2_XTS_BDF_MAP_VALID assignment to context init
Stewart Smith (1):
hdat/i2c.c: quieten "v2 found, parsing as v1"
Vasant Hegde (1):
opal-prd: Insert powernv_flash module
Signed-off-by: Stewart Smith <stewart@linux.ibm.com>
The OpenPOWER firmware build process uses Buildroot to create a toolchain and build the various components of the PNOR firmware, including Hostboot, Skiboot, OCC, Petitboot etc.
https://open-power.github.io/op-build/
See the doc/ directory for documentation source. Contributions are VERY welcome!
Issues, Milestones, pull requests and code hosting is on GitHub: https://github.com/open-power/op-build
See CONTRIBUTING.md for howto contribute code.
To build an image for a Palmetto system:
git clone --recursive git@github.com:open-power/op-build.git cd op-build . op-build-env op-build palmetto_defconfig && op-build
There are also default configurations for other platforms in openpower/configs/. Current POWER8 platforms include Habanero, Firestone, and Garrison. Current POWER9 platforms include Witherspoon, Boston (p9dsu), Romulus, and Zaius.
Buildroot/op-build supports both native and cross-compilation - it will automatically download and build an appropriate toolchain as part of the build process, so you don't need to worry about setting up a cross-compiler. Cross-compiling from a x86-64 host is officially supported.
Install Ubuntu (>= 14.04) or Debian (>= 7.5) 64-bit.
Enable Universe (Ubuntu only):
sudo apt-get install software-properties-common sudo add-apt-repository universe
Install the packages necessary for the build:
sudo apt-get install cscope ctags libz-dev libexpat-dev \ python language-pack-en texinfo \ build-essential g++ git bison flex unzip \ libssl-dev libxml-simple-perl libxml-sax-perl libxml2-dev libxml2-utils xsltproc \ wget bc
Install Fedora 25 64-bit (older Fedora should also work).
Install the packages necessary for the build:
sudo dnf install gcc-c++ flex bison git ctags cscope expat-devel patch \ zlib-devel zlib-static texinfo perl-bignum "perl(XML::Simple)" \ "perl(YAML)" "perl(XML::SAX)" "perl(Fatal)" "perl(Thread::Queue)" \ "perl(Env)" "perl(XML::LibXML)" "perl(Digest::SHA1)" libxml2-devel \ which wget unzip tar cpio python bzip2 bc findutils ncurses-devel