commit	4387bee73a5bfd8259e04b69e9e4da4579368193	[log] [tgz]
author	hostboot <hostboot@us.ibm.com>	Thu Aug 12 00:53:05 2021 -0500
committer	hostboot <hostboot@us.ibm.com>	Thu Aug 12 00:53:05 2021 -0500
tree	ffb1e34a526f5c5fa628939d05dc656f0c6ac177
parent	b06ee63adea2e33fdf2894dcf35df5cec5dc93ed [diff]

op-build update 8-12-2021

Changes Included for package occ, branch master-p10:
5a4f8f4 - Sumit Kumar - 2021-08-11 - 24x7: Alink fix to update debug counter correctly
7da584b - Sumit Kumar - 2021-08-11 - 24x7: OTL fix to reset count with getscom config read
fd1fddb - Sumit Kumar - 2021-08-11 - 24x7: Reading PHB event counter twice in 8 ms internval
8adccb0 - Sumit Kumar - 2021-08-10 - 24x7: Reduce delay to 0 between successive event count reads
b7f7505 - Sumit Kumar - 2021-08-10 - 24x7: Fix for OCMB memory store offset

Changes Included for package hcode, branch master-p10:
b560119 - hostboot - 2021-08-11 - Release tag & head commit information updated for hw081121a.opmst10
be1d99b - Chris Steffen - 2021-08-11 - SMPX Halflink Training Fail (SW531947)
7151a9e - Greg Still - 2021-08-11 - UV/OV - product tune settings
9b2ce7e - Jim Crugnale - 2021-08-11 - Adding/updating error thresholds and FIRs to allow/check low BER Quad fails
239024e - hostboot - 2021-08-09 - Release tag & head commit information updated for hw080921a.opmst10

Changes Included for package hostboot, branch master-p10:
4142002 - Chen Du - 2021-08-11 - EKB commit to keep main boot seeprom's SPI Engine in PIB mode
5f19b3b - Chen Du - 2021-08-11 - Keep boot seeprom's SPI Engine in PIB mode
a1f8c2f - Christian Geddes - 2021-08-11 - Only init PNOR at runtime if PLDM PNOR IO is enabled via config flags
d84e548 - hostboot - 2021-08-10 - Update HCODE commit to 3c6374f... PGPE: Use ECO Mask for droop detection
866c351 - hostboot - 2021-08-10 - Update SBE commit to 97d548d... Improve error message for sbe ffdc
e5cda71 - hostboot - 2021-08-10 - Update simics level to: 2021-08-05_a0f011_simics.tar.gz a0f0117578121872
8495693 - Zane Shelley - 2021-08-09 - PRD: Disable RCS failover on transient error or threshold
33c3bb0 - Stephen Glancy - 2021-08-09 - Updates rank to rank timings for 2933
4693fdd - Ilya Smirnov - 2021-08-09 - Port MCTP CRC Checking
c7240ab - Amit Tendolkar - 2021-08-09 - Handling deadcores in PM Halt sequence

Changes Included for package pnor, branch master-p10:
2fceb8c - Ilya Smirnov - 2021-08-11 - Merge pull request #142 from IlyaSmirnov91/master-p10
096427d - Ilya Smirnov - 2021-08-10 - P10: Increase PAYLOAD partition size to 1MB

Changes Included for package hostboot-binaries, branch master:
9f77b61 - hostboot - 2021-08-11 - UPDATE executables for the NVIDIA gpu and/or ring files for hw081121a.opmst10
3921e17 - hostboot - 2021-08-09 - UPDATE executables for the NVIDIA gpu and/or ring files for hw080921a.opmst10

Signed-off-by: hostboot <hostboot@us.ibm.com>

5 files changed

tree: ffb1e34a526f5c5fa628939d05dc656f0c6ac177

README.md

OpenPOWER Firmware Build Environment

The OpenPOWER firmware build process uses Buildroot to create a toolchain and build the various components of the PNOR firmware, including Hostboot, Skiboot, OCC, Petitboot etc.

Documentation

https://open-power.github.io/op-build/

See the doc/ directory for documentation source. Contributions are VERY welcome!

Development

Issues, Milestones, pull requests and code hosting is on GitHub: https://github.com/open-power/op-build

See CONTRIBUTING.md for howto contribute code.

Mailing list: openpower-firmware@lists.ozlabs.org
Info/Subscribe: https://lists.ozlabs.org/listinfo/openpower-firmware
Archives: https://lists.ozlabs.org/pipermail/openpower-firmware/

Building an image

To build an image for a Blackbird system:

git clone --recursive git@github.ibm.com:open-power/op-build.git
cd op-build
./op-build rainier_defconfig && ./op-build

There are also default configurations for other platforms in openpower/configs/. Current POWER9 platforms include Witherspoon, Boston (p9dsu), Romulus, and Zaius.

Buildroot/op-build supports both native and cross-compilation - it will automatically download and build an appropriate toolchain as part of the build process, so you don't need to worry about setting up a cross-compiler. Cross-compiling from a x86-64 host is officially supported.

The machine your building on will need Python 2.7, GCC 6.2 (or later), and a handful of other packages (see below).

Dependencies for 64-bit Ubuntu/Debian systems

Install Ubuntu (>= 18.04) or Debian (>= 9) 64-bit.

Enable Universe (Ubuntu only):

 sudo apt-get install software-properties-common
 sudo add-apt-repository universe

Install the packages necessary for the build:

 sudo apt-get install cscope ctags libz-dev libexpat-dev \
   python language-pack-en texinfo gawk cpio xxd \
   build-essential g++ git bison flex unzip \
   libssl-dev libxml-simple-perl libxml-sax-perl libxml-parser-perl libxml2-dev libxml2-utils xsltproc \
   wget bc rsync

Dependencies for 64-bit Fedora systems

Install Fedora (>= 25) 64-bit.

Install the packages necessary for the build:

 sudo dnf install gcc-c++ flex bison git ctags cscope expat-devel patch \
   zlib-devel zlib-static texinfo "perl(bigint)" "perl(XML::Simple)" \
   "perl(YAML)" "perl(XML::SAX)" "perl(Fatal)" "perl(Thread::Queue)" \
   "perl(Env)" "perl(XML::LibXML)" "perl(Digest::SHA1)" "perl(ExtUtils::MakeMaker)" \
   "perl(FindBin)" "perl(English)" "perl(Time::localtime)" \
   libxml2-devel which wget unzip tar cpio python bzip2 bc findutils ncurses-devel \
   openssl-devel make libxslt vim-common lzo-devel python2 rsync hostname