diff --git a/openpower/overlay/etc/init.d/S10udev b/openpower/overlay/etc/init.d/S10udev
new file mode 100755
index 0000000..fd8179e
--- /dev/null
+++ b/openpower/overlay/etc/init.d/S10udev
@@ -0,0 +1,49 @@
+#!/bin/sh
+#
+# udev	This is a minimal non-LSB version of a UDEV startup script.  It
+#	was derived by stripping down the udev-058 LSB version for use
+#	with buildroot on embedded hardware using Linux 2.6.34+ kernels.
+#
+#	You may need to customize this for your system's resource limits
+#	(including startup time!) and administration.  For example, if
+#	your early userspace has a custom initramfs or initrd you might
+#	need /dev much earlier; or without hotpluggable busses (like USB,
+#	PCMCIA, MMC/SD, and so on) your /dev might be static after boot.
+#
+#	This script assumes your system boots right into the eventual root
+#	filesystem, and that init runs this udev script before any programs
+#	needing more device nodes than the bare-bones set -- /dev/console,
+#	/dev/zero, /dev/null -- that's needed to boot and run this script.
+#
+
+# Check for missing binaries
+UDEV_BIN=/sbin/udevd
+test -x $UDEV_BIN || exit 5
+
+# Check for config file and read it
+UDEV_CONFIG=/etc/udev/udev.conf
+test -r $UDEV_CONFIG || exit 6
+. $UDEV_CONFIG
+
+case "$1" in
+    start)
+        printf "Populating ${udev_root:-/dev} using udev: "
+        printf '\000\000\000\000' > /proc/sys/kernel/hotplug
+        $UDEV_BIN -d || (echo "FAIL" && exit 1)
+        udevadm trigger --type=subsystems --action=add
+        udevadm trigger --type=devices --action=add
+        echo "done"
+        ;;
+    stop)
+        # Stop execution of events
+        udevadm control --stop-exec-queue
+        killall udevd
+        ;;
+    *)
+        echo "Usage: $0 {start|stop}"
+        exit 1
+        ;;
+esac
+
+
+exit 0
diff --git a/openpower/overlay/etc/init.d/S17udevsettle b/openpower/overlay/etc/init.d/S17udevsettle
new file mode 100755
index 0000000..92d3f9c
--- /dev/null
+++ b/openpower/overlay/etc/init.d/S17udevsettle
@@ -0,0 +1,10 @@
+#!/bin/sh
+case "$1" in
+    start)
+        udevadm settle --timeout=30 || echo "udevadm settle failed"
+	;;
+    *)
+        exit 1;;
+esac
+
+exit 0
diff --git a/openpower/package/capp-ucode/capp-ucode.mk b/openpower/package/capp-ucode/capp-ucode.mk
index 79fbbf6..c846638 100644
--- a/openpower/package/capp-ucode/capp-ucode.mk
+++ b/openpower/package/capp-ucode/capp-ucode.mk
@@ -6,6 +6,7 @@
 CAPP_UCODE_VERSION ?= 1bb7503078ed39b74a7b9c46925da75e547ceea6
 CAPP_UCODE_SITE ?= $(call github,open-power,capp-ucode,$(CAPP_UCODE_VERSION))
 CAPP_UCODE_LICENSE = Apache-2.0
+CAPP_UCODE_LICENSE_FILES = NOTICES
 
 CAPP_UCODE_INSTALL_IMAGES = YES
 
diff --git a/openpower/package/common-p8-xml/common-p8-xml.mk b/openpower/package/common-p8-xml/common-p8-xml.mk
index 282adb3..cd0afe4 100644
--- a/openpower/package/common-p8-xml/common-p8-xml.mk
+++ b/openpower/package/common-p8-xml/common-p8-xml.mk
@@ -8,6 +8,7 @@
 COMMON_P8_XML_SITE ?= $(call github,open-power,common-p8-xml,$(COMMON_P8_XML_VERSION))
 
 COMMON_P8_XML_LICENSE = Apache-2.0
+COMMON_P8_XML_LICENSE_FILES = LICENSE
 COMMON_P8_XML_DEPENDENCIES =
 
 COMMON_P8_XML_INSTALL_IMAGES = YES
diff --git a/openpower/package/habanero-xml/habanero-xml.mk b/openpower/package/habanero-xml/habanero-xml.mk
index 165f63d..66f2791 100644
--- a/openpower/package/habanero-xml/habanero-xml.mk
+++ b/openpower/package/habanero-xml/habanero-xml.mk
@@ -8,6 +8,7 @@
 HABANERO_XML_SITE ?= $(call github,open-power,habanero-xml,$(HABANERO_XML_VERSION))
 
 HABANERO_XML_LICENSE = Apache-2.0
+HABANERO_XML_LICENSE_FILES = LICENSE
 HABANERO_XML_DEPENDENCIES = hostboot openpower-mrw common-p8-xml
 
 HABANERO_XML_INSTALL_IMAGES = YES
diff --git a/openpower/package/hostboot-binaries/hostboot_binaries.mk b/openpower/package/hostboot-binaries/hostboot_binaries.mk
index a0dc5b1..ca9062e 100644
--- a/openpower/package/hostboot-binaries/hostboot_binaries.mk
+++ b/openpower/package/hostboot-binaries/hostboot_binaries.mk
@@ -4,9 +4,10 @@
 #
 ################################################################################
 
-HOSTBOOT_BINARIES_VERSION ?= 56532f5370ea875dfafb10a049b5f3ff6882cc08
+HOSTBOOT_BINARIES_VERSION ?= 464ab6a961bd062788e73923ff5e10fe4d119d95
 HOSTBOOT_BINARIES_SITE ?= $(call github,open-power,hostboot-binaries,$(HOSTBOOT_BINARIES_VERSION))
 HOSTBOOT_BINARIES_LICENSE = Apache-2.0
+HOSTBOOT_BINARIES_LICENSE_FILES = LICENSE
 
 HOSTBOOT_BINARIES_INSTALL_IMAGES = YES
 HOSTBOOT_BINARIES_INSTALL_TARGET = NO
diff --git a/openpower/package/hostboot/hostboot.mk b/openpower/package/hostboot/hostboot.mk
index 0dab44c..93229c8 100644
--- a/openpower/package/hostboot/hostboot.mk
+++ b/openpower/package/hostboot/hostboot.mk
@@ -4,12 +4,13 @@
 #
 ################################################################################
 HOSTBOOT_VERSION_BRANCH_MASTER_P8 ?= e28b28fa9995ab3039b44f2c200fdbbc58313677
-HOSTBOOT_VERSION_BRANCH_MASTER ?= fdef37827ef440d4821298b2b7923387530b9b26
+HOSTBOOT_VERSION_BRANCH_MASTER ?= fffe871494c7c430e93fc939d15582158c458e3c
 
 HOSTBOOT_VERSION ?= $(if $(BR2_OPENPOWER_POWER9),$(HOSTBOOT_VERSION_BRANCH_MASTER),$(HOSTBOOT_VERSION_BRANCH_MASTER_P8))
 HOSTBOOT_SITE ?= $(call github,open-power,hostboot,$(HOSTBOOT_VERSION))
 
 HOSTBOOT_LICENSE = Apache-2.0
+HOSTBOOT_LICENSE_FILES = LICENSE
 HOSTBOOT_DEPENDENCIES = host-binutils
 
 HOSTBOOT_INSTALL_IMAGES = YES
diff --git a/openpower/package/libflash/libflash.mk b/openpower/package/libflash/libflash.mk
index f39e8c8..a76aa4d 100644
--- a/openpower/package/libflash/libflash.mk
+++ b/openpower/package/libflash/libflash.mk
@@ -10,6 +10,8 @@
 LIBFLASH_INSTALL_STAGING = YES
 LIBFLASH_INSTALL_TARGET = YES
 
+LIBFLASH_LICENSE_FILES = LICENCE
+
 LIBFLASH_MAKE_OPTS += CC="$(TARGET_CC)" LD="$(TARGET_LD)" \
 		     AS="$(TARGET_AS)" AR="$(TARGET_AR)" NM="$(TARGET_NM)" \
 		     OBJCOPY="$(TARGET_OBJCOPY)" OBJDUMP="$(TARGET_OBJDUMP)" \
diff --git a/openpower/package/occ/occ.mk b/openpower/package/occ/occ.mk
index da0352d..0ea1bec 100644
--- a/openpower/package/occ/occ.mk
+++ b/openpower/package/occ/occ.mk
@@ -10,6 +10,7 @@
 OCC_VERSION ?= $(if $(BR2_OPENPOWER_POWER9),$(OCC_VERSION_BRANCH_MASTER),$(OCC_VERSION_BRANCH_MASTER_P8))
 OCC_SITE ?= $(call github,open-power,occ,$(OCC_VERSION))
 OCC_LICENSE = Apache-2.0
+OCC_LICENSE_FILES = src/LICENSE
 
 OCC_INSTALL_IMAGES = YES
 OCC_INSTALL_TARGET = NO
diff --git a/openpower/package/openpower-ffs/openpower-ffs.mk b/openpower/package/openpower-ffs/openpower-ffs.mk
index ff82950..b2909cf 100644
--- a/openpower/package/openpower-ffs/openpower-ffs.mk
+++ b/openpower/package/openpower-ffs/openpower-ffs.mk
@@ -1,6 +1,7 @@
 OPENPOWER_FFS_VERSION ?= 2e790b8409071ca15767d822dabfa8e60f12c6e2
 OPENPOWER_FFS_SITE ?= $(call github,open-power,ffs,$(OPENPOWER_FFS_VERSION))
 OPENPOWER_FFS_LICENSE = GPLv2+
+OPENPOWER_FFS_LICENSE_FILES = LICENSE
 
 define HOST_OPENPOWER_FFS_BUILD_CMDS
 	cd $(@D) ; \
diff --git a/openpower/package/openpower-mrw/openpower-mrw.mk b/openpower/package/openpower-mrw/openpower-mrw.mk
index ccd059f..e70cbd6 100644
--- a/openpower/package/openpower-mrw/openpower-mrw.mk
+++ b/openpower/package/openpower-mrw/openpower-mrw.mk
@@ -8,6 +8,7 @@
 OPENPOWER_MRW_SITE = $(call github,open-power,openpower-mrw,$(OPENPOWER_MRW_VERSION))
 
 OPENPOWER_MRW_LICENSE = Apache-2.0
+OPENPOWER_MRW_LICENSE_FILES = LICENSE
 OPENPOWER_MRW_DEPENDENCIES =
 
 OPENPOWER_MRW_INSTALL_IMAGES = YES
diff --git a/openpower/package/openpower-pnor/openpower-pnor.mk b/openpower/package/openpower-pnor/openpower-pnor.mk
index ef72704..70e96a9 100644
--- a/openpower/package/openpower-pnor/openpower-pnor.mk
+++ b/openpower/package/openpower-pnor/openpower-pnor.mk
@@ -12,6 +12,7 @@
 OPENPOWER_PNOR_SITE ?= $(call github,open-power,pnor,$(OPENPOWER_PNOR_VERSION))
 
 OPENPOWER_PNOR_LICENSE = Apache-2.0
+OPENPOWER_PNOR_LICENSE_FILES = LICENSE
 OPENPOWER_PNOR_DEPENDENCIES = hostboot hostboot-binaries $(XML_PACKAGE) skiboot host-openpower-ffs occ capp-ucode
 
 ifeq ($(BR2_PACKAGE_SKIBOOT_EMBED_PAYLOAD),n)
diff --git a/openpower/package/p8-pore-binutils/p8-pore-binutils.mk b/openpower/package/p8-pore-binutils/p8-pore-binutils.mk
index 070e4dc..1040f18 100644
--- a/openpower/package/p8-pore-binutils/p8-pore-binutils.mk
+++ b/openpower/package/p8-pore-binutils/p8-pore-binutils.mk
@@ -7,7 +7,7 @@
 P8_PORE_BINUTILS_VERSION ?= 1d6a41d5a5104ce9bc8b6ad59f8e58c3a50824a4
 P8_PORE_BINUTILS_SITE ?= $(call github,open-power,p8-pore-binutils,$(P8_PORE_BINUTILS_VERSION))
 P8_PORE_BINUTILS_LICENSE = GPLv3+
-
+P8_PORE_BINUTILS_LICENSE_FILES = COPYING3 COPYING.LIB
 HOST_P8_PORE_BINUTILS_DEPENDENCIES = host-binutils
 
 P8_PORE_BINUTILS_DIR = $(STAGING_DIR)/p8-pore-binutils
diff --git a/openpower/package/skiboot/skiboot.mk b/openpower/package/skiboot/skiboot.mk
index 8ff9159..b14855f 100644
--- a/openpower/package/skiboot/skiboot.mk
+++ b/openpower/package/skiboot/skiboot.mk
@@ -8,6 +8,7 @@
 
 SKIBOOT_SITE = $(call github,open-power,skiboot,$(SKIBOOT_VERSION))
 SKIBOOT_LICENSE = Apache-2.0
+SKIBOOT_LICENSE_FILES = LICENCE
 SKIBOOT_INSTALL_IMAGES = YES
 SKIBOOT_INSTALL_TARGET = NO