| commit | 4f574d4450b056298b1555d6594935ba3be78dbb | [log] [tgz] |
|---|---|---|
| author | hostboot <hostboot@us.ibm.com> | Wed Aug 26 16:31:48 2020 -0500 |
| committer | hostboot <hostboot@us.ibm.com> | Wed Aug 26 16:31:48 2020 -0500 |
| tree | 81f2121acc0913d5b3ab4b3d5ea2dd9ca0705bef | |
| parent | 316e057c9c85d3e3ed0228662aab2dad7653291d [diff] |
op-build update 8-26-2020 Changes Included for package sbe, branch master-p10: a96dd9a - Sunil Kumar - 2020-08-26 - Added ECC path in the sbeModifyPGvalue.py 55f0dac - Sunil Kumar - 2020-08-26 - Ignore Bit 0 of the core scratch register to fetch the TI data. 5bc796b - Raja Das - 2020-08-26 - Added delay before check for PLL locks in Sticky Spinster workaround 4a80088 - Yue Du - 2020-08-26 - QME: Fix stop2 timefac error b463876 - Prem Shanker Jha - 2020-08-26 - HW534619: tfac-selfrestore workarounds and tfac tod fix 7fb6676 - Yue Du - 2020-08-26 - QME: STOP Bug fixes 644b216 - Greg Still - 2020-08-26 - STOP: manage enablement timefac shadow based on TOD state bf10caa - Yue Du - 2020-08-26 - QME: EPM and PowerMixer updates 163bfa8 - Yue Du - 2020-08-26 - QME: Core/Cache Scom Customize Restore HWPs 02e426f - Yue Du - 2020-08-26 - Istep4: all in one commit 2ceb80d - Yue Du - 2020-08-26 - VBU: EQ_STOPCLOCKS 6dbcb92 - Yue Du - 2020-08-26 - QME: Fixes for EPM and Powermixer ce69a9a - Yue Du - 2020-08-26 - QME: Stop11 Entry 14006c2 - Yue Du - 2020-08-26 - STOP/QME/FAPI: Tracking EPM/VBU HW Sim Changes 9366a22 - Yue Du - 2020-08-26 - QME: HWPF Support Fapi2 Procedures into QME Image 35d34de - Raja Das - 2020-08-26 - Simics release update b857234 - Joachim Fenkes - 2020-08-26 - p10_sbe_chiplet_reset: Update sync pulse delay for all chiplets Changes Included for package hostboot, branch master-p10: df5e96b - Murulidhar Nataraju - 2020-08-26 - MPIPL: Update Processor Dump Area table 63740bc - Murulidhar Nataraju - 2020-08-26 - HB_MPIPL: Handle TIMA/SPR/GPR read failure scenarios 2d94f4e - Mike Baiocchi - 2020-08-26 - Update 'hb simsetup' error output 48c06bb - hostboot - 2020-08-26 - Update simics level to: 2020-08-25_1485f9_simics.tar.gz 1485f963db733bce cef9b0d - Zach Clark - 2020-08-26 - Break exp_check_for_ready into smaller time slices 8f94091 - Stephen Glancy - 2020-08-26 - Adds Exp FW version check for PHY reset e49cdc5 - Stephen Glancy - 2020-08-26 - Adds explorer PHY init tool a6089d4 - Joe McGill - 2020-08-26 - p10.iop.scan.initfile -- add tx_clock_gen_align_chicken_bit inits 26aacad - Mark Pizzutillo - 2020-08-26 - Add support for PMIC 1U/2U PWR_GOOD IO Mode Signed-off-by: hostboot <hostboot@us.ibm.com>
The OpenPOWER firmware build process uses Buildroot to create a toolchain and build the various components of the PNOR firmware, including Hostboot, Skiboot, OCC, Petitboot etc.
https://open-power.github.io/op-build/
See the doc/ directory for documentation source. Contributions are VERY welcome!
Issues, Milestones, pull requests and code hosting is on GitHub: https://github.com/open-power/op-build
See CONTRIBUTING.md for howto contribute code.
To build an image for a Palmetto system:
git clone --recursive git@github.ibm.com:open-power/op-build.git cd op-build ./op-build rainier_defconfig && ./op-build
There are also default configurations for other platforms in openpower/configs/. Current POWER8 platforms include Habanero, Firestone, and Garrison. Current POWER9 platforms include Witherspoon, Boston (p9dsu), Romulus, and Zaius.
Buildroot/op-build supports both native and cross-compilation - it will automatically download and build an appropriate toolchain as part of the build process, so you don't need to worry about setting up a cross-compiler. Cross-compiling from a x86-64 host is officially supported.
The machine your building on will need Python 2.7, GCC 6.2 (or later), and a handful of other packages (see below).
Install Ubuntu (>= 18.04) or Debian (>= 9) 64-bit.
Enable Universe (Ubuntu only):
sudo apt-get install software-properties-common sudo add-apt-repository universe
Install the packages necessary for the build:
sudo apt-get install cscope ctags libz-dev libexpat-dev \ python language-pack-en texinfo \ build-essential g++ git bison flex unzip \ libssl-dev libxml-simple-perl libxml-sax-perl libxml-parser-perl libxml2-dev libxml2-utils xsltproc \ wget bc rsync
Install Fedora (>= 25) 64-bit.
Install the packages necessary for the build:
sudo dnf install gcc-c++ flex bison git ctags cscope expat-devel patch \ zlib-devel zlib-static texinfo "perl(bigint)" "perl(XML::Simple)" \ "perl(YAML)" "perl(XML::SAX)" "perl(Fatal)" "perl(Thread::Queue)" \ "perl(Env)" "perl(XML::LibXML)" "perl(Digest::SHA1)" "perl(ExtUtils::MakeMaker)" \ libxml2-devel which wget unzip tar cpio python bzip2 bc findutils ncurses-devel \ openssl-devel make libxslt vim-common lzo-devel python2