Add separate config files for Everest
diff --git a/openpower/configs/hostboot/everest.config b/openpower/configs/hostboot/everest.config
new file mode 100644
index 0000000..2f2ef2a
--- /dev/null
+++ b/openpower/configs/hostboot/everest.config
@@ -0,0 +1,90 @@
+# The HIOMAP protocol is used to access PNOR
+unset SFC_IS_AST2500
+unset SFC_IS_AST2400
+set PNORDD_IS_IPMI
+unset PNORDD_IS_SFC
+unset ALLOW_MICRON_PNOR
+unset ALLOW_MACRONIX_PNOR
+
+# VPD options - Enable EECACHE
+set MVPD_READ_FROM_HW
+set MVPD_WRITE_TO_HW
+unset MVPD_READ_FROM_PNOR
+unset MVPD_WRITE_TO_PNOR
+
+set DJVPD_READ_FROM_HW
+set DJVPD_WRITE_TO_HW
+unset DJVPD_READ_FROM_PNOR
+unset DJVPD_WRITE_TO_PNOR
+
+set MEMVPD_READ_FROM_HW
+set MEMVPD_WRITE_TO_HW
+unset MEMVPD_READ_FROM_PNOR
+unset MEMVPD_WRITE_TO_PNOR
+
+# PLDM will be read via PLDM which is not supported yet
+#set PVPD_READ_FROM_HW
+#set PVPD_WRITE_TO_HW
+#unset PVPD_READ_FROM_PNOR
+#unset PVPD_WRITE_TO_PNOR
+
+# gpio config
+set GPIODD
+unset PALMETTO_VDDR
+
+# Enable consecutive SBE updates
+set SBE_UPDATE_CONSECUTIVE
+unset SBE_UPDATE_INDEPENDENT
+unset SBE_UPDATE_SEQUENTIAL
+unset SBE_UPDATE_SIMULTANEOUS
+unset NO_SBE_UPDATES
+# NOTE: Aggressive LRU currently required to free enough memory for SBE updates
+set AGGRESSIVE_LRU
+
+#unset PCIE_HOTPLUG_CONTROLLER
+
+# turn on console output
+set CONSOLE
+
+set BMC_AST2500
+
+#set DISABLE_HOSTBOOT_RUNTIME
+
+# Compile in hostboot runtime PRD
+#unset HBRT_PRD
+
+# PNOR flags
+unset PNOR_TWO_SIDE_SUPPORT
+
+set BMC_BT_LPC_IPMI
+
+# Enable hardware access to the EEPROMs with a cache
+set SUPPORT_EEPROM_CACHING
+set SUPPORT_EEPROM_HWACCESS
+
+# set for trace debug to console
+unset CONSOLE_OUTPUT_TRACE
+
+# Output FFDC to console
+set CONSOLE_OUTPUT_FFDCDISPLAY
+
+# RTC TODO 248361
+# Remove some time before product ships
+set PRINT_SYSTEM_INFO
+
+# Terminate Hostboot when errors occur in manufacturing mode
+# (relies on BMC to not trigger reboot)
+#unset HANG_ON_MFG_SRC_TERM
+
+set ENABLE_HDAT_IN_HOSTBOOT
+
+# Load lids via PLDM File IO
+unset LOAD_PHYP_FROM_BOOTKERNEL
+set LOAD_LIDS_VIA_PLDM
+
+# enable multi-chip
+unset FORCE_SINGLE_CHIP
+
+# Disable presence detection (workaround for Everest bug)
+unset PHYS_PRES_PWR_BUTTON
+unset KEY_CLEAR
diff --git a/openpower/configs/hostboot/rainier.config b/openpower/configs/hostboot/rainier.config
index 549ae15..a0bf15f 100755
--- a/openpower/configs/hostboot/rainier.config
+++ b/openpower/configs/hostboot/rainier.config
@@ -82,7 +82,7 @@
set ENABLE_HDAT_IN_HOSTBOOT
-# Temporary workaround for SW461052
+# Temporary workaround for SW461052
set P10_BRING_UP
# Load lids via PLDM File IO
@@ -91,7 +91,3 @@
# enable multi-chip
unset FORCE_SINGLE_CHIP
-
-# Disable presence detection (workaround for Everest bug)
-unset PHYS_PRES_PWR_BUTTON
-unset KEY_CLEAR