| commit | 5599bcd19591556ff4d97fe8b04d799b60235ed6 | [log] [tgz] |
|---|---|---|
| author | Stewart Smith <stewart@linux.vnet.ibm.com> | Fri Jul 28 16:49:07 2017 +1000 |
| committer | Stewart Smith <stewart@linux.vnet.ibm.com> | Fri Jul 28 17:27:54 2017 +1000 |
| tree | 5dc6935a3789a3e488712967a744e410458fd6b8 | |
| parent | 22ffd96e22dc1adafcc30aae3611c2a5230d86d3 [diff] |
skiboot v5.7-24-g81c0e076374e
Michael Neuling (15):
phb4: Only clear some PHB config space registers on errors
phb4: Move functions around to avoid forward declarations
phb4: Dump devctl and devstat registers
phb4: Fix copy/paste typo in error logging
phb4: Clear more error registers
phb4: Disable device config space access when fenced
phb4: Simplify prepare_link_change() calls
phb4: Simplify calling phb4_eeh_dump_regs()
phb4: Split clearing REGB into new function
phb4: Clear errors before deasserting reset
phb4: Mark PHB as fenced on creset
phb4: Set REGB error enables based on link state
Revert "phb4: Read PERST signal rather than assuming it's asserted"
phb4: Assert PERST before PHB reset
phb4: Be more conservative on link presence timeout
Shilpasri G Bhat (8):
occ: Add support for OPAL-OCC command/response interface
opal-msg: Increase the max-async completion count by max chips possible
powercap: occ: Add a generic powercap framework
psr: occ: Add support to change power-shifting-ratio
sensors: occ: Add support for OCC inband sensors
sensors: occ: Add CSM_{min/max} sensors
sensors: occ: Skip the deconfigured core sensors
sensors: occ: Add support to clear sensor groups
Stewart Smith (1):
hw/occ-sensor: fix 'sensor' may be used uninitialized warning on some GCC
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
The OpenPOWER firmware build process uses Buildroot to create a toolchain and build the various components of the PNOR firmware, including Hostboot, Skiboot, OCC, Petitboot etc.
Issues, Milestones, pull requests and code hosting is on GitHub: https://github.com/open-power/op-build
Mailing list: openpower-firmware@lists.ozlabs.org
Info/Subscribe: https://lists.ozlabs.org/listinfo/openpower-firmware
Archives: https://lists.ozlabs.org/pipermail/openpower-firmware/
To build an image for a Palmetto system:
git clone --recursive git@github.com:open-power/op-build.git cd op-build . op-build-env op-build palmetto_defconfig && op-build
There are also default configurations for other platforms in openpower/configs/ such as Habanero and Firestone.
Buildroot/op-build supports both native and cross-compilation - it will automatically download and build an appropriate toolchain as part of the build process, so you don't need to worry about setting up a cross-compiler. Cross-compiling from a x86-64 host is officially supported.
Install Ubuntu (>= 14.04) or Debian (>= 7.5) 64-bit.
Enable Universe (Ubuntu only):
sudo apt-get install software-properties-common sudo add-apt-repository universe
Install the packages necessary for the build:
sudo apt-get install cscope ctags libz-dev libexpat-dev \ python language-pack-en texinfo \ build-essential g++ git bison flex unzip \ libssl-dev libxml-simple-perl libxml-sax-perl libxml2-dev libxml2-utils xsltproc \ wget bc
Install Fedora 25 64-bit (older Fedora should also work).
Install the packages necessary for the build:
sudo dnf install gcc-c++ flex bison git ctags cscope expat-devel patch \ zlib-devel zlib-static texinfo perl-bignum "perl(XML::Simple)" \ "perl(YAML)" "perl(XML::SAX)" "perl(Fatal)" "perl(Thread::Queue)" \ "perl(Env)" "perl(XML::LibXML)" "perl(Digest::SHA1)" libxml2-devel \ which wget unzip tar cpio python bzip2 bc findutils ncurses-devel