commit	c99ac0023f8978dc39a13b6fb8e50d69998c8ba4	[log] [tgz]
author	hostboot <hostboot@us.ibm.com>	Wed Dec 14 00:21:30 2022 -0600
committer	hostboot <hostboot@us.ibm.com>	Wed Dec 14 00:21:30 2022 -0600
tree	ccdcc441dcb2acab5b10f14cff4ba82191a69d18
parent	9e40492fcbf09c10f3161b21636f83d20ff531c5 [diff]

op-build ibm-release-fw1020 update 12-14-2022

Changes Included for package everest-xml, branch release-fw1020:
353e0ea - Dan - 2022-12-13 - Merge pull request #19 from open-power/revert-17-release-fw1030
74a55b7 - Dan - 2022-12-12 - Revert "Sync fw_1030 branch --> fw_1020 branch"
5683ba3 - Anh Dang - 2022-12-08 - Merge pull request #17 from open-power/release-fw1030
2ec9474 - Dan - 2022-11-29 - Merge pull request #15 from adangster/master
d32f234 - adangster - 2022-11-29 - Change per Defect PE00F1SB : Add 50mV VDN uplift
1f518ca - Anh Dang - 2022-11-29 - Merge pull request #14 from adangster/master
2ac5a65 - adangster - 2022-11-29 - Change per Defect PE00F1SB : Add 50mV VDN uplift
9313601 - adangster - 2022-11-14 - Correct wrong i2c addresses for: - ADS7138_Imon_C1-C4 and ADS7138_Imon_C5-C8   0x2A --> 0x2E  (wrong in workbook) - Tola-0/IR35220-00-0 (0x7F-->0x28) - Tola-0/TDA38740-00-0 (0x1F-->0x20) - Tola-0/TDA38740-01-0  (0x1F-->0x20)
3747ac2 - Dan - 2022-11-10 - Merge pull request #13 from adangster/master
ede729c - adangster - 2022-11-08 - Correct I2C address --8bit address 0x80 for 7bit address 0x40
b3e9b92 - adangster - 2022-11-08 - Adding a second i2c_bus connection to "TDA38740 device has two address. 0x10 and 0x40 (PMaddress) on the same device. Firmware use both addresses, so to support FRU call out for both connections, I need to add an extra i2c slave bus to this device. as requested by https://w3.rchland.ibm.com/projects/bestquest/?defect=PE00DY2V
350998e - Anh Dang - 2022-09-13 - Merge pull request #12 from adangster/master
e94fa6b - adangster - 2022-09-13 - Rename OSC part per request to make it easier to read. No logic change (SW556105 ) SI5332_BMC_02-0 -> SI5332LD-osc-0 SI5332_BMC_01-1 -> SI5332LD-osc-1
5121f5f - adangster - 2022-09-06 - https://w3.rchland.ibm.com/projects/bestquest/?defect=SW554303 update SPDa/SPDb to match value in Denali per requested from Defect. 0x02 BYTE_ADDRESS_OFFSET 0x04 MEMORY_SIZE_IN_KB RSPD VPD_TYPE 0x08 WRITE_PAGE_SIZE
ed03e15 - Anh Dang - 2022-08-09 - Merge pull request #11 from adangster/master
52ede87 - adangster - 2022-08-08 - Merge branch 'master' of https://github.com/adangster/everest-xml.git
a4d6d9f - adangster - 2022-08-08 - SW555313 : Set ATTR_SYS_CLOCK_INTEGRATED_SPARES to 1 for Everest
125c880 - Anh Dang - 2022-08-08 - Merge pull request #10 from open-power/release-fw1020
c5651df - Anh Dang - 2022-07-07 - Merge branch 'open-power:master' into master
44bb655 - Dan - 2022-06-17 - Merge pull request #7 from adangster/master

Signed-off-by: hostboot <hostboot@us.ibm.com>

openpower/configs/p10ebmc_defconfig[diff]

1 file changed

tree: ccdcc441dcb2acab5b10f14cff4ba82191a69d18

README.md

OpenPOWER Firmware Build Environment

The OpenPOWER firmware build process uses Buildroot to create a toolchain and build the various components of the PNOR firmware, including Hostboot, Skiboot, OCC, Petitboot etc.

Documentation

https://open-power.github.io/op-build/

See the doc/ directory for documentation source. Contributions are VERY welcome!

Development

Issues, Milestones, pull requests and code hosting is on GitHub: https://github.com/open-power/op-build

See CONTRIBUTING.md for howto contribute code.

Mailing list: openpower-firmware@lists.ozlabs.org
Info/Subscribe: https://lists.ozlabs.org/listinfo/openpower-firmware
Archives: https://lists.ozlabs.org/pipermail/openpower-firmware/

Building an image

To build an image for a Blackbird system:

git clone --recursive git@github.com:open-power/op-build.git
cd op-build
./op-build p10ebmc_defconfig && ./op-build

There are also default configurations for other platforms in openpower/configs/. Current POWER9 platforms include Witherspoon, Boston (p9dsu), Romulus, and Zaius.

Buildroot/op-build supports both native and cross-compilation - it will automatically download and build an appropriate toolchain as part of the build process, so you don't need to worry about setting up a cross-compiler. Cross-compiling from a x86-64 host is officially supported.

The machine your building on will need Python 2.7, GCC 6.2 (or later), and a handful of other packages (see below).

Dependencies for 64-bit Ubuntu/Debian systems

Install Ubuntu (>= 18.04) or Debian (>= 9) 64-bit.

Enable Universe (Ubuntu only):

 sudo apt-get install software-properties-common
 sudo add-apt-repository universe

Install the packages necessary for the build:

 sudo apt-get install cscope ctags libz-dev libexpat-dev \
   python language-pack-en texinfo gawk cpio xxd \
   build-essential g++ git bison flex unzip \
   libssl-dev libxml-simple-perl libxml-sax-perl libxml-parser-perl libxml2-dev libxml2-utils xsltproc \
   wget bc rsync

Dependencies for 64-bit Fedora systems

Install Fedora (>= 25) 64-bit.

Install the packages necessary for the build:

 sudo dnf install gcc-c++ flex bison git ctags cscope expat-devel patch \
   zlib-devel zlib-static texinfo "perl(bigint)" "perl(XML::Simple)" \
   "perl(YAML)" "perl(XML::SAX)" "perl(Fatal)" "perl(Thread::Queue)" \
   "perl(Env)" "perl(XML::LibXML)" "perl(Digest::SHA1)" "perl(ExtUtils::MakeMaker)" \
   "perl(FindBin)" "perl(English)" "perl(Time::localtime)" \
   libxml2-devel which wget unzip tar cpio python bzip2 bc findutils ncurses-devel \
   openssl-devel make libxslt vim-common lzo-devel python2 rsync hostname