commit	a453f296843faec683eb2cc5ec9f843c22b88b00	[log] [tgz]
author	hostboot <hostboot@us.ibm.com>	Tue Apr 06 00:56:45 2021 -0500
committer	hostboot <hostboot@us.ibm.com>	Tue Apr 06 00:56:45 2021 -0500
tree	31e9cfaf13ad94e1fd84fcd9d6e0f5ea71466229
parent	ab5ef12297b7d8bb6ed34e1b8fb3d62d7f404146 [diff]

op-build update 4-6-2021

Changes Included for package hostboot, branch master-p10:
b48824e - Louis Stermole - 2021-04-05 - Fixes exp eff config thermal stale attribute bug
c025129 - Ricardo Mata Jr - 2021-04-05 - DMA improvments for TCE and CInj performance.
0300831 - Chris Cain - 2021-04-05 - Fix endian conversion for sensor_id in encode_sensor_event_data
c0b415b - Louis Stermole - 2021-04-05 - Suppress FAPI_ERR messages from DDIMM EFD probing
9e6f4d4 - Louis Stermole - 2021-04-05 - Don't assert from ddimm_get_efd for unsupported freq if ffdc_enabled not set
4950159 - Christian Geddes - 2021-04-05 - Use fapi position attributes for crohostdumpfapiattrs response
cfcb339 - Deb McLemore - 2021-04-05 - Add DELAYED_DECONFIG to participate in reconfig reboots
004265b - Christian Geddes - 2021-04-05 - Add writeLidFileFromOffset PLDM Request API
9d64c84 - Prem Shanker Jha - 2021-04-05 - PM HWP: Populated XGPE Image header with some WOF related attributes.
d1ff128 - Amit Tendolkar - 2021-04-05 - Base commit to extract hcode elogs from SBE / Cronus
55467a0 - Yue Du - 2021-04-05 - IPL: Skip qme attribute build when in contained mode ipl
bfaef09 - Austin Cui - 2021-04-05 - Implementing Override Match for wof_data_xlator tool
801bb61 - McIlvain - 2021-04-05 - SMART Micron 4U 128G 0_5_x
26009cb - Ben Gass - 2021-04-05 - Add TP_TPBR_PSI_WRAP_RX_DF_FSM_REG to manualmoveregs.txt for hwsv
1732ee2 - Yue Du - 2021-04-05 - Stopclocks: drop SRAM_ABIST_MODE_DC in eq_stopclocks
85b21ff - Emmanuel Sacristan - 2021-04-05 - correcting sp_cmd_rate for F8 systems
2720a79 - Joe McGill - 2021-04-05 - p10_fbc_tdm_recovery -- updates for IO, first pass HW testing
49922b6 - Louis Stermole - 2021-04-05 - Add ATTR_MSS_EXP_COMM_STATE and set in HWPs
cd9971a - Matthew Hickman - 2021-04-05 - Added L3 and callout updates to thermal init
0587ab4 - Mark Pizzutillo - 2021-04-05 - Change consumers of MDS type to use manual accessor
84bcacb - Caleb Palmer - 2021-04-05 - PRD: Update parsing TdCtlr state data for row repair
dda8178 - Matthew Hickman - 2021-04-05 - Added plug rule to prevent MDS mixing
e1da164 - Stephen Glancy - 2021-04-05 - Removes SPD version checkings
98df625 - Daniel Crowell - 2021-04-05 - Cleanup target definitions for P10
73d326e - Mark Pizzutillo - 2021-04-05 - Update pmic_enable for new init sequence
2842774 - Yue Du - 2021-04-05 - MMA: Fix MMA platform Attributes
6e77f10 - hostboot - 2021-04-05 - Update HCODE commit to 6e5f0f2... Conditionally compile PAUL DPLL settin
a3b221e - hostboot - 2021-04-05 - Update simics level to: 2021-04-02_7a6224_simics.tar.gz 7a622453cd639839
5fc476f - Joe McGill - 2021-04-05 - p10.fbc.scan.initfile -- add clockgate disables for Wee Trucks
7a5ea95 - Daniel Crowell - 2021-04-05 - Conditionally compile PAUL DPLL setting
5cb168f - Joachim Fenkes - 2021-04-05 - Transfer ATTR_TPM_SPI_BUS_DIV via scratch reg 13
b7d6115 - Joachim Fenkes - 2021-04-05 - Add ATTR_TPM_SPI_BUS_DIV attribute to choose SPI settings in measurement
fa213e3 - RAJA DAS - 2021-04-05 - Revert "Work-around: Hard-coded Boot PAU DPLL in NO_BYPASS mode"

Signed-off-by: hostboot <hostboot@us.ibm.com>

openpower/package/hostboot-p10/Config.in[diff]

1 file changed

tree: 31e9cfaf13ad94e1fd84fcd9d6e0f5ea71466229

README.md

OpenPOWER Firmware Build Environment

The OpenPOWER firmware build process uses Buildroot to create a toolchain and build the various components of the PNOR firmware, including Hostboot, Skiboot, OCC, Petitboot etc.

Documentation

https://open-power.github.io/op-build/

See the doc/ directory for documentation source. Contributions are VERY welcome!

Development

Issues, Milestones, pull requests and code hosting is on GitHub: https://github.com/open-power/op-build

See CONTRIBUTING.md for howto contribute code.

Mailing list: openpower-firmware@lists.ozlabs.org
Info/Subscribe: https://lists.ozlabs.org/listinfo/openpower-firmware
Archives: https://lists.ozlabs.org/pipermail/openpower-firmware/

Building an image

To build an image for a Blackbird system:

git clone --recursive git@github.ibm.com:open-power/op-build.git
cd op-build
./op-build rainier_defconfig && ./op-build

There are also default configurations for other platforms in openpower/configs/. Current POWER9 platforms include Witherspoon, Boston (p9dsu), Romulus, and Zaius.

Buildroot/op-build supports both native and cross-compilation - it will automatically download and build an appropriate toolchain as part of the build process, so you don't need to worry about setting up a cross-compiler. Cross-compiling from a x86-64 host is officially supported.

The machine your building on will need Python 2.7, GCC 6.2 (or later), and a handful of other packages (see below).

Dependencies for 64-bit Ubuntu/Debian systems

Install Ubuntu (>= 18.04) or Debian (>= 9) 64-bit.

Enable Universe (Ubuntu only):

 sudo apt-get install software-properties-common
 sudo add-apt-repository universe

Install the packages necessary for the build:

 sudo apt-get install cscope ctags libz-dev libexpat-dev \
   python language-pack-en texinfo gawk cpio xxd \
   build-essential g++ git bison flex unzip \
   libssl-dev libxml-simple-perl libxml-sax-perl libxml-parser-perl libxml2-dev libxml2-utils xsltproc \
   wget bc rsync

Dependencies for 64-bit Fedora systems

Install Fedora (>= 25) 64-bit.

Install the packages necessary for the build:

 sudo dnf install gcc-c++ flex bison git ctags cscope expat-devel patch \
   zlib-devel zlib-static texinfo "perl(bigint)" "perl(XML::Simple)" \
   "perl(YAML)" "perl(XML::SAX)" "perl(Fatal)" "perl(Thread::Queue)" \
   "perl(Env)" "perl(XML::LibXML)" "perl(Digest::SHA1)" "perl(ExtUtils::MakeMaker)" \
   "perl(FindBin)" "perl(English)" "perl(Time::localtime)" \
   libxml2-devel which wget unzip tar cpio python bzip2 bc findutils ncurses-devel \
   openssl-devel make libxslt vim-common lzo-devel python2 rsync hostname