| commit | dfb5a93d12c0b83f24650533f17075f1aa0ced43 | [log] [tgz] |
|---|---|---|
| author | Stewart Smith <stewart@linux.ibm.com> | Wed Mar 06 17:54:41 2019 +1100 |
| committer | Stewart Smith <stewart@linux.ibm.com> | Wed Mar 06 17:54:41 2019 +1100 |
| tree | 94d23450934c1e2295b916af19f56b9ea81da543 | |
| parent | b0c35017c309d152bba203da173ae481b1ecbc47 [diff] |
skiboot v6.2.2
Alexey Kardashevskiy (1):
hw/phb3/naples: Disable D-states
Andrew Jeffery (53):
libflash/test: Generate header dependencies for tests
test-ipmi-hiomap: Add ability to delay some IPMI messages
test-ipmi-hiomap: Dump unexpected IPMI messages
test-ipmi-hiomap: Ensure the completion code is set
test-ipmi-hiomap: Print some information on early scenario_exit()
libflash/ipmi-hiomap: Fix leak of msg in callback
libflash/ipmi-hiomap: Overhaul error handling
libflash/ipmi-hiomap: Overhaul event handling
libflash/ipmi-hiomap: Remove unused close handling
libflash/ipmi-hiomap: Enforce message size for empty response
test-ipmi-hiomap: Add protocol-persistent-error test
test-ipmi-hiomap: Add read-one-block test
test-ipmi-hiomap: Add read-two-blocks test
test-ipmi-hiomap: Add event-before-read
test-ipmi-hiomap: Add event-during-read test
test-ipmi-hiomap: Add write-one-block test
test-ipmi-hiomap: Add write-two-blocks test
test-ipmi-hiomap: Add event-before-write test
test-ipmi-hiomap: Add event-during-write test
test-ipmi-hiomap: Add erase-one-block test
test-ipmi-hiomap: Add erase-two-blocks test
test-ipmi-hiomap: Add event-before-erase test
test-ipmi-hiomap: Add event-during-erase
test-ipmi-hiomap: Add bad-sequence test
test-ipmi-hiomap: Add action-error test
test-ipmi-hiomap: Add get-flash-info test
test-ipmi-hiomap: Add get-info-error test
test-ipmi-hiomap: Add get-flash-info-error test
test-ipmi-hiomap: Add create-read-window-error test
test-ipmi-hiomap: Add create-write-window-error test
test-ipmi-hiomap: Add mark-dirty-error test
test-ipmi-hiomap: Add flush-error test
test-ipmi-hiomap: Add ack-error test
test-ipmi-hiomap: Add erase-error test
test-ipmi-hiomap: Add ack-malformed tests
test-ipmi-hiomap: Add get-info-malformed tests
test-ipmi-hiomap: Add get-flash-info-malformed tests
test-ipmi-hiomap: Add create-read-window-malformed tests
test-ipmi-hiomap: Add create-write-window-malformed tests
test-ipmi-hiomap: Add mark-dirty-malformed tests
test-ipmi-hiomap: Add flush-malformed tests
test-ipmi-hiomap: Add erase-malformed tests
test-ipmi-hiomap: Add protocol-recovery-failure-ack test
test-ipmi-hiomap: Add protocol-recovery-failure-get-info test
test-ipmi-hiomap: Add protocol-recovery-get-flash-info-failure test
test-ipmi-hiomap: Add read-one-block-twice test
test-ipmi-hiomap: Add write-one-block-twice test
test-ipmi-hiomap: Add erase-one-block-twice test
ast-io: Rework ast_sio_is_enabled() test sequence
astbmc: Try IPMI HIOMAP for P8 (again)
p8dtu: Enable HIOMAP support
p8dtu: Configure BMC graphics
astbmc: Enable IPMI HIOMAP for AMI platforms
Shilpasri G Bhat (1):
powercap: occ: Fix the powercapping range allowed for user
Stewart Smith (1):
qemu: bt device isn't always hanging off /
Vasant Hegde (7):
ipmi/power: Fix system reboot issue
hw/bt: Fix message retry handler
hw/bt: Add backend interface to disable ipmi message retry option
hw/bt: Introduce separate list for synchronous messages
core/ipmi: Add ipmi sync messages to top of the list
hw/bt: Do not disable ipmi message retry during OPAL boot
skiboot v6.2.2 release notes
Signed-off-by: Stewart Smith <stewart@linux.ibm.com>
The OpenPOWER firmware build process uses Buildroot to create a toolchain and build the various components of the PNOR firmware, including Hostboot, Skiboot, OCC, Petitboot etc.
https://open-power.github.io/op-build/
See the doc/ directory for documentation source. Contributions are VERY welcome!
Issues, Milestones, pull requests and code hosting is on GitHub: https://github.com/open-power/op-build
See CONTRIBUTING.md for howto contribute code.
To build an image for a Palmetto system:
git clone --recursive git@github.com:open-power/op-build.git cd op-build . op-build-env op-build palmetto_defconfig && op-build
There are also default configurations for other platforms in openpower/configs/. Current POWER8 platforms include Habanero, Firestone, and Garrison. Current POWER9 platforms include Witherspoon, Boston (p9dsu), Romulus, and Zaius.
Buildroot/op-build supports both native and cross-compilation - it will automatically download and build an appropriate toolchain as part of the build process, so you don't need to worry about setting up a cross-compiler. Cross-compiling from a x86-64 host is officially supported.
Install Ubuntu (>= 14.04) or Debian (>= 7.5) 64-bit.
Enable Universe (Ubuntu only):
sudo apt-get install software-properties-common sudo add-apt-repository universe
Install the packages necessary for the build:
sudo apt-get install cscope ctags libz-dev libexpat-dev \ python language-pack-en texinfo \ build-essential g++ git bison flex unzip \ libssl-dev libxml-simple-perl libxml-sax-perl libxml-parser-perl libxml2-dev libxml2-utils xsltproc \ wget bc
Install Fedora 25 64-bit (older Fedora should also work).
Install the packages necessary for the build:
sudo dnf install gcc-c++ flex bison git ctags cscope expat-devel patch \ zlib-devel zlib-static texinfo perl-bignum "perl(XML::Simple)" \ "perl(YAML)" "perl(XML::SAX)" "perl(Fatal)" "perl(Thread::Queue)" \ "perl(Env)" "perl(XML::LibXML)" "perl(Digest::SHA1)" libxml2-devel \ which wget unzip tar cpio python bzip2 bc findutils ncurses-devel