commit	f09af8b06afcb2084fe9bf51a6111620bf8b5687	[log] [tgz]
author	hostboot <hostboot@us.ibm.com>	Fri Aug 14 10:25:08 2020 -0500
committer	hostboot <hostboot@us.ibm.com>	Fri Aug 14 10:25:08 2020 -0500
tree	73095be895d67d78b51927f4d4759b7ca56cb0ef
parent	e34224b0d6c346df697055b59e5a630dbfd85559 [diff]

op-build update 8-14-2020

Changes Included for package sbe, branch master-p10:
a14525d - Sumit Kumar - 2020-08-13 - Correcting steps to generate qme image
dbb86e6 - Thi Tran - 2020-08-13 - Create PCIE utility files
69f7c90 - Yue Du - 2020-08-13 - QME: Release CPLT_CTRL5 fence in core/cache_reset
5d19218 - Prasad Bg Ranganath - 2020-08-13 - PM HWP: Some bug fixes in power down and qme sram access hwp
2931aa3 - Joachim Fenkes - 2020-08-13 - IPL: Increase INOP_ALIGN from 8:1 to 16:1
9d4fccd - Joachim Fenkes - 2020-08-13 - p10_sbe_chiplet_fir_init: Drop CFIR masks
dbd77f3 - Joe McGill - 2020-08-13 - add support for personalization of core LPAR mode
70c8493 - Murulidhar Nataraju - 2020-08-13 - MPIPL: Added 4 more SPR to the collection list
9657744 - Murulidhar Nataraju - 2020-08-13 - MPIPL: On TIMA/SPR/GPR access failure capture FFDC
8fbf5ca - Murulidhar Nataraju - 2020-08-13 - MPIPL: Handle TIMA/SPR/GPR read failure scenarios

Changes Included for package hostboot, branch master-p10:
5406447 - Nick Bofferding - 2020-08-14 - Write PLDM entity ID information to sys and chassis attributes
c1106be - Christian Geddes - 2020-08-14 - Remove MPIPL references in exit cache contained HWP wrapper
85708b4 - Joachim Fenkes - 2020-08-14 - p10_sbe_select_ex: Only needed EQs in MC group 6 for istep 4
a968315 - Joachim Fenkes - 2020-08-14 - IPL v61: Update hang pulse settings
7ae02e0 - Anusha Reddy Rangareddygari - 2020-08-14 - IPL HWP updates
6b189c9 - Joachim Fenkes - 2020-08-14 - istep 2+3: Optimize multicast and hang pulse setup
7bda19e - Anusha Reddy Rangareddygari - 2020-08-14 - P10 HWP updates - istep 2 procedures
76fe89f - Jayashankar Padath - 2020-08-14 - HDAT: Value change on the platform IPL side
397de57 - Zane Shelley - 2020-08-14 - ATTN: allow MemOps to pass PRD an OCMB instead of PROC
437b56c - Zane Shelley - 2020-08-14 - PRD: allow PRD::main() accept OCMB chips
cbe1026 - Zane Shelley - 2020-08-14 - PRD: Change EQ, PAUC, and NMMU default callout to PROC
158040f - Zane Shelley - 2020-08-14 - PRD: remove some unused P9 references
850cb1f - Caleb Palmer - 2020-08-14 - PRD: Update Omic regs and plugins for P10
a054cf9 - Dan Crowell - 2020-08-14 - Hide PEER_TARGET from ServerWiz
32a8115 - Prasad Bg Ranganath - 2020-08-14 - PM HWP: Some bug fixes in power down and qme sram access hwp
ea3cf27 - Mark Pizzutillo - 2020-08-14 - Fix support for revision 0.4 SPD
df93990 - Louis Stermole - 2020-08-13 - Suppress FAPI_ERR messages from DDIMM EFD probing
8b6ec4a - Bill Hoffa - 2020-08-13 - Skip OMI Testcases for frequencies greater than 21330
1d11c81 - Joachim Fenkes - 2020-08-13 - p10_sbe_chiplet_fir_init: Drop CFIR masks
d6a4ce8 - Thi Tran - 2020-08-13 - Create PCIE utility files
8eb23a8 - Louis Stermole - 2020-08-13 - Change DSTLFIR_SUBCHANNEL_A_TLX_SPECIAL_ATTENTION to host attention
050006a - Matthew Raybuck - 2020-08-13 - Remove volatile-zeroed persistency from SYSTEM_IPL_PHASE Attribute
3cfb122 - Adam Hale - 2020-08-13 - Allow x4 mode omi width

Signed-off-by: hostboot <hostboot@us.ibm.com>

2 files changed

tree: 73095be895d67d78b51927f4d4759b7ca56cb0ef

README.md

OpenPOWER Firmware Build Environment

The OpenPOWER firmware build process uses Buildroot to create a toolchain and build the various components of the PNOR firmware, including Hostboot, Skiboot, OCC, Petitboot etc.

Documentation

https://open-power.github.io/op-build/

See the doc/ directory for documentation source. Contributions are VERY welcome!

Development

Issues, Milestones, pull requests and code hosting is on GitHub: https://github.com/open-power/op-build

See CONTRIBUTING.md for howto contribute code.

Mailing list: openpower-firmware@lists.ozlabs.org
Info/Subscribe: https://lists.ozlabs.org/listinfo/openpower-firmware
Archives: https://lists.ozlabs.org/pipermail/openpower-firmware/

Building an image

To build an image for a Palmetto system:

git clone --recursive git@github.ibm.com:open-power/op-build.git
cd op-build
./op-build rainier_defconfig && ./op-build

There are also default configurations for other platforms in openpower/configs/. Current POWER8 platforms include Habanero, Firestone, and Garrison. Current POWER9 platforms include Witherspoon, Boston (p9dsu), Romulus, and Zaius.

Buildroot/op-build supports both native and cross-compilation - it will automatically download and build an appropriate toolchain as part of the build process, so you don't need to worry about setting up a cross-compiler. Cross-compiling from a x86-64 host is officially supported.

The machine your building on will need Python 2.7, GCC 6.2 (or later), and a handful of other packages (see below).

Dependencies for 64-bit Ubuntu/Debian systems

Install Ubuntu (>= 18.04) or Debian (>= 9) 64-bit.

Enable Universe (Ubuntu only):

 sudo apt-get install software-properties-common
 sudo add-apt-repository universe

Install the packages necessary for the build:

 sudo apt-get install cscope ctags libz-dev libexpat-dev \
   python language-pack-en texinfo \
   build-essential g++ git bison flex unzip \
   libssl-dev libxml-simple-perl libxml-sax-perl libxml-parser-perl libxml2-dev libxml2-utils xsltproc \
   wget bc rsync

Dependencies for 64-bit Fedora systems

Install Fedora (>= 25) 64-bit.

Install the packages necessary for the build:

 sudo dnf install gcc-c++ flex bison git ctags cscope expat-devel patch \
   zlib-devel zlib-static texinfo "perl(bigint)" "perl(XML::Simple)" \
   "perl(YAML)" "perl(XML::SAX)" "perl(Fatal)" "perl(Thread::Queue)" \
   "perl(Env)" "perl(XML::LibXML)" "perl(Digest::SHA1)" "perl(ExtUtils::MakeMaker)" \
   libxml2-devel which wget unzip tar cpio python bzip2 bc findutils ncurses-devel \
   openssl-devel make libxslt vim-common lzo-devel python2