diff --git a/openpower/configs/hostboot/rainier.config b/openpower/configs/hostboot/rainier.config
new file mode 100755
index 0000000..8459ec6
--- /dev/null
+++ b/openpower/configs/hostboot/rainier.config
@@ -0,0 +1,80 @@
+# The HIOMAP protocol is used to access PNOR
+unset SFC_IS_AST2500
+unset SFC_IS_AST2400
+set   PNORDD_IS_IPMI
+unset PNORDD_IS_SFC
+set   ALLOW_MICRON_PNOR
+set   ALLOW_MACRONIX_PNOR
+
+# VPD options - Enable EECACHE
+set MVPD_READ_FROM_HW
+set MVPD_WRITE_TO_HW
+unset MVPD_READ_FROM_PNOR
+unset MVPD_WRITE_TO_PNOR
+
+set DJVPD_READ_FROM_HW
+set DJVPD_WRITE_TO_HW
+unset DJVPD_READ_FROM_PNOR
+unset DJVPD_WRITE_TO_PNOR
+
+set MEMVPD_READ_FROM_HW
+set MEMVPD_WRITE_TO_HW
+unset MEMVPD_READ_FROM_PNOR
+unset MEMVPD_WRITE_TO_PNOR
+
+#set PVPD_READ_FROM_HW
+#set PVPD_WRITE_TO_HW
+#unset PVPD_READ_FROM_PNOR
+#unset PVPD_WRITE_TO_PNOR
+
+unset CDIMM_FORMAT_FOR_CVPD
+
+# gpio config
+set GPIODD
+unset PALMETTO_VDDR
+
+# Enable Consecutive SBE Updates
+unset SBE_UPDATE_CONSECUTIVE
+unset SBE_UPDATE_INDEPENDENT
+unset SBE_UPDATE_SEQUENTIAL
+unset SBE_UPDATE_SIMULTANEOUS
+set NO_SBE_UPDATES
+
+#unset PCIE_HOTPLUG_CONTROLLER
+
+# turn on console output
+set CONSOLE
+set BMC_AST2500
+
+#set DISABLE_HOSTBOOT_RUNTIME
+
+# Compile in hostboot runtime PRD
+#unset HBRT_PRD
+
+# Compile in hb rt HTMGT : Load/Start OCC
+#unset HTMGT
+#unset START_OCC_DURING_BOOT
+#unset CONSOLE_OUTPUT_OCC_COMM
+
+# PNOR flags
+unset PNOR_TWO_SIDE_SUPPORT
+
+set BMC_BT_LPC_IPMI
+set AXONE
+set AXONE_BRINGUP
+set SUPPORT_EEPROM_CACHING
+
+# Enable Checkstop Analysis for both
+#   Runtime and IPLtime scenarios
+unset IPLTIME_CHECKSTOP_ANALYSIS
+
+# set for trace debug to console
+set CONSOLE_OUTPUT_TRACE
+#set CONSOLE_OUTPUT_FFDCDISPLAY
+
+# Terminate Hostboot when errors occur in manufacturing mode
+#   (relies on BMC to not trigger reboot)
+#unset HANG_ON_MFG_SRC_TERM
+
+# This is not working in P10 op-build
+unset ENABLE_HDAT_IN_HOSTBOOT