diff --git a/openpower/configs/hostboot/p8dtu.config b/openpower/configs/hostboot/p8dtu.config
new file mode 100644
index 0000000..7781d39
--- /dev/null
+++ b/openpower/configs/hostboot/p8dtu.config
@@ -0,0 +1,70 @@
+# The Serial Flash Controller is the AST2400 BMC.
+set   SFC_IS_AST2400
+set   PNORDD_IS_IPMI
+unset PNORDD_IS_SFC
+set   BMC_DOES_SFC_INIT
+unset SFC_IS_IBM_DPSS
+set   ALLOW_MICRON_PNOR
+set   ALLOW_MACRONIX_PNOR
+
+# VPD options.
+set MVPD_READ_FROM_HW
+set MVPD_WRITE_TO_HW
+set MVPD_READ_FROM_PNOR
+set MVPD_WRITE_TO_PNOR
+set DJVPD_READ_FROM_HW
+unset DJVPD_WRITE_TO_HW
+set DJVPD_READ_FROM_PNOR
+set DJVPD_WRITE_TO_PNOR
+set CVPD_READ_FROM_HW
+set CVPD_WRITE_TO_HW
+set CVPD_READ_FROM_PNOR
+set CVPD_WRITE_TO_PNOR
+set PVPD_READ_FROM_HW
+set PVPD_WRITE_TO_HW
+set PVPD_READ_FROM_PNOR
+set PVPD_WRITE_TO_PNOR
+set SKIP_RESTRICT_EX_UNITS
+unset CDIMM_FORMAT_FOR_CVPD
+
+# gpio config
+set GPIODD
+set PALMETTO_VDDR
+
+# Enable SBE updates
+#set SBE_UPDATE_INDEPENDENT
+set SBE_UPDATE_SIMULTANEOUS
+
+unset PCIE_HOTPLUG_CONTROLLER
+
+# turn on console output
+set CONSOLE
+set BMC_AST2400
+
+# Enable Kingston dimm voltage workaround
+unset KINGSTON_1_35_VOLT
+
+unset DISABLE_HOSTBOOT_RUNTIME
+
+# Compile in hostboot runtime PRD
+set HBRT_PRD
+set HTMGT
+set START_OCC_DURING_BOOT
+
+#PNOR flags
+unset PNOR_TWO_SIDE_SUPPORT
+set PNOR_IS_32MB
+
+set BMC_BT_LPC_IPMI
+
+unset SET_NOMINAL_PSTATE
+
+# Enable Checktop Analysis
+set ENABLE_CHECKSTOP_ANALYSIS
+set IPLTIME_CHECKSTOP_ANALYSIS
+
+# Hostboot will detect hardware changes
+set HOST_HCDB_SUPPORT
+
+# set for trace debug to console
+unset CONSOLE_OUTPUT_TRACE
diff --git a/openpower/configs/p8dtu_defconfig b/openpower/configs/p8dtu_defconfig
new file mode 100644
index 0000000..ce5aec3
--- /dev/null
+++ b/openpower/configs/p8dtu_defconfig
@@ -0,0 +1,67 @@
+BR2_powerpc64le=y
+BR2_powerpc_power8=y
+BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_OP_BUILD_PATH)/patches/p8dtu-patches"
+BR2_BINUTILS_EXTRA_CONFIG_OPTIONS="--enable-targets=powerpc64-linux"
+BR2_GCC_VERSION_6_X=y
+BR2_EXTRA_GCC_CONFIG_OPTIONS="--enable-targets=powerpc64-linux --disable-libsanitizer"
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+BR2_TARGET_GENERIC_HOSTNAME="skiroot"
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
+BR2_ROOTFS_DEVICE_TABLE="../openpower/device_table.txt"
+BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
+BR2_ENABLE_LOCALE_WHITELIST="C de en es fr it ja ko pt_BR ru zh_CN zh_TW"
+BR2_GENERATE_LOCALE="en_US.UTF-8 de_DE.UTF-8 es_ES.UTF-8 fr_FR.UTF-8 it_IT.UTF-8 ja_JP.UTF-8 ko_KR.UTF-8 pt_BR.UTF-8 ru_RU.UTF-8 zh_CN.UTF-8 zh_TW.UTF-8"
+BR2_SYSTEM_ENABLE_NLS=y
+BR2_ROOTFS_USERS_TABLES="$(BR2_EXTERNAL_OP_BUILD_PATH)/configs/users-table"
+BR2_ROOTFS_OVERLAY="../openpower/overlay"
+BR2_ROOTFS_POST_BUILD_SCRIPT="../openpower/scripts/fixup-target-var ../openpower/scripts/firmware-whitelist"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0.5"
+BR2_LINUX_KERNEL_PATCH="$(BR2_EXTERNAL_OP_BUILD_PATH)/linux"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_OP_BUILD_PATH)/configs/linux/skiroot_defconfig"
+BR2_LINUX_KERNEL_ZIMAGE_EPAPR=y
+BR2_LINUX_KERNEL_XZ=y
+BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_OP_BUILD_PATH)/configs/busybox.fragment"
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_BNX2X=y
+BR2_PACKAGE_LINUX_FIRMWARE_CXGB4_T4=y
+BR2_PACKAGE_IPMITOOL=y
+BR2_PACKAGE_IPMITOOL_USB=y
+BR2_PACKAGE_MDADM=y
+BR2_PACKAGE_NCURSES_WCHAR=y
+BR2_PACKAGE_DROPBEAR=y
+# BR2_PACKAGE_DROPBEAR_SERVER is not set
+BR2_PACKAGE_ETHTOOL=y
+BR2_PACKAGE_LRZSZ=y
+BR2_PACKAGE_NETCAT=y
+BR2_PACKAGE_RSYNC=y
+BR2_PACKAGE_SUDO=y
+BR2_PACKAGE_UTIL_LINUX_AGETTY=y
+BR2_TARGET_ROOTFS_CPIO_XZ=y
+BR2_TARGET_ROOTFS_INITRAMFS=y
+BR2_OPENPOWER_PLATFORM=y
+BR2_OPENPOWER_POWER8=y
+BR2_HOSTBOOT_P8_CONFIG_FILE="p8dtu.config"
+BR2_OPENPOWER_MACHINE_XML_GITHUB_PROJECT_VALUE="p8dtu-xml"
+BR2_OPENPOWER_MACHINE_XML_VERSION="2a4ddd34b8517f8ccbbeb560737b012dd8f0c857"
+BR2_OPENPOWER_MACHINE_XML_FILENAME="p8dtu.xml"
+BR2_OPENPOWER_SYSTEM_XML_FILENAME="P8DTU_hb.system.xml"
+BR2_OPENPOWER_MRW_XML_FILENAME="P8DTU_hb.mrw.xml"
+BR2_OPENPOWER_BIOS_XML_FILENAME="P8DTU_bios.xml"
+BR2_OPENPOWER_PNOR_XML_LAYOUT_FILENAME="defaultPnorLayoutSingleSide.xml"
+BR2_OPENPOWER_CONFIG_NAME="p8dtu"
+BR2_OPENPOWER_PNOR_FILENAME="P8DTU.pnor"
+BR2_HOSTBOOT_BINARY_SBE_FILENAME="venice_sbe.img.ecc"
+BR2_HOSTBOOT_BINARY_SBEC_FILENAME="centaur_sbec_pad.img.ecc"
+BR2_HOSTBOOT_BINARY_WINK_FILENAME="p8.ref_image.hdr.bin.ecc"
+BR2_IMA_CATALOG_FILENAME="ima_catalog.bin"
+BR2_OPENPOWER_TARGETING_BIN_FILENAME="P8DTU_HB.targeting.bin"
+BR2_OPENPOWER_TARGETING_ECC_FILENAME="P8DTU_HB.targeting.bin.ecc"
+BR2_PACKAGE_PETITBOOT=y
+BR2_PACKAGE_PETITBOOT_MTD=y
+BR2_CAPP_UCODE_BIN_FILENAME="cappucode.bin"
+BR2_PACKAGE_LOADKEYS=y
+BR2_IMA_CATALOG_DTS="POWER8"
diff --git a/openpower/patches/p8dtu-patches/hostboot-p8/0001-Memory-Interleaving-Grouping-change-for-p8dtu.patch b/openpower/patches/p8dtu-patches/hostboot-p8/0001-Memory-Interleaving-Grouping-change-for-p8dtu.patch
new file mode 100644
index 0000000..acdb1c0
--- /dev/null
+++ b/openpower/patches/p8dtu-patches/hostboot-p8/0001-Memory-Interleaving-Grouping-change-for-p8dtu.patch
@@ -0,0 +1,27 @@
+From e6db702ece6f5d13c7d0b288203a0715b4a2a35b Mon Sep 17 00:00:00 2001
+From: Jim Yuan <jim.yuan@supermicro.com>
+Date: Tue, 18 Oct 2016 16:08:13 -0700
+Subject: [PATCH 01/14] Memory Interleaving Grouping change for p8dtu. Allow
+ not adjacent pair for p8dtu.
+
+Signed-off-by: Jim Yuan <jim.yuan@supermicro.com>
+---
+ src/usr/targeting/common/xmltohb/attribute_types.xml | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/usr/targeting/common/xmltohb/attribute_types.xml b/src/usr/targeting/common/xmltohb/attribute_types.xml
+index 0fc5f4eac..d7fc183a4 100644
+--- a/src/usr/targeting/common/xmltohb/attribute_types.xml
++++ b/src/usr/targeting/common/xmltohb/attribute_types.xml
+@@ -13812,7 +13812,7 @@ firmware notes: Platforms should initialize this attribute to AUTO (0)</descript
+     </description>
+     <simpleType>
+         <uint8_t>
+-        <default>1</default>
++        <default>0</default>
+         </uint8_t>
+     </simpleType>
+     <persistency>non-volatile</persistency>
+-- 
+2.16.2.windows.1
+
diff --git a/openpower/patches/p8dtu-patches/hostboot-p8/0002-Support-130W-Turismo-Parts.patch b/openpower/patches/p8dtu-patches/hostboot-p8/0002-Support-130W-Turismo-Parts.patch
new file mode 100644
index 0000000..9b3c4b0
--- /dev/null
+++ b/openpower/patches/p8dtu-patches/hostboot-p8/0002-Support-130W-Turismo-Parts.patch
@@ -0,0 +1,40 @@
+From 3040a458385e82d7d9edf7b926fcdba641d0a048 Mon Sep 17 00:00:00 2001
+From: Jim Yuan <jim.yuan@supermicro.com>
+Date: Tue, 18 Oct 2016 16:12:21 -0700
+Subject: [PATCH 02/14] Support 130W Turismo Parts.
+
+Signed-off-by: Jim Yuan <jim.yuan@supermicro.com>
+---
+ src/usr/targeting/common/xmltohb/attribute_types.xml | 2 +-
+ src/usr/targeting/common/xmltohb/target_types.xml    | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/src/usr/targeting/common/xmltohb/attribute_types.xml b/src/usr/targeting/common/xmltohb/attribute_types.xml
+index d7fc183a4..0f0e2f6a7 100644
+--- a/src/usr/targeting/common/xmltohb/attribute_types.xml
++++ b/src/usr/targeting/common/xmltohb/attribute_types.xml
+@@ -15890,7 +15890,7 @@ firmware notes: Platforms should initialize this attribute to AUTO (0)</descript
+     <simpleType>
+         <enumeration>
+             <id>MRW_NEST_CAPABLE_FREQUENCIES_SYS</id>
+-            <default>UNSUPPORTED_FREQ</default>
++            <default>2000_MHZ_OR_2400_MHZ</default>
+         </enumeration>
+     </simpleType>
+     <persistency>non-volatile</persistency>
+diff --git a/src/usr/targeting/common/xmltohb/target_types.xml b/src/usr/targeting/common/xmltohb/target_types.xml
+index b28607ca2..a150ce64d 100644
+--- a/src/usr/targeting/common/xmltohb/target_types.xml
++++ b/src/usr/targeting/common/xmltohb/target_types.xml
+@@ -681,7 +681,7 @@
+     </attribute>
+     <attribute>
+         <id>DEFAULT_PROC_MODULE_NEST_FREQ_MHZ</id>
+-        <default>2400</default>
++        <default>2000</default>
+     </attribute>
+ </targetType>
+ 
+-- 
+2.16.2.windows.1
+
diff --git a/openpower/patches/p8dtu-patches/hostboot-p8/0003-Add-support-for-memory-voltage-control-for-p8dtu.patch b/openpower/patches/p8dtu-patches/hostboot-p8/0003-Add-support-for-memory-voltage-control-for-p8dtu.patch
new file mode 100644
index 0000000..4f6b021
--- /dev/null
+++ b/openpower/patches/p8dtu-patches/hostboot-p8/0003-Add-support-for-memory-voltage-control-for-p8dtu.patch
@@ -0,0 +1,49 @@
+From 783332cc9afcf3c8581760112162b650a9e01c7e Mon Sep 17 00:00:00 2001
+From: Jim Yuan <jim.yuan@supermicro.com>
+Date: Tue, 4 Oct 2016 16:07:44 -0700
+Subject: [PATCH 03/14] Adds support for memory voltage control specific to the p8dtu platform.
+
+Signed-off-by: Jim Yuan <jim.yuan@supermicro.com>
+---
+ src/usr/hwpf/hwp/dram_training/palmetto_vddr.C | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/src/usr/hwpf/hwp/dram_training/palmetto_vddr.C b/src/usr/hwpf/hwp/dram_training/palmetto_vddr.C
+index b0f6bed4c..95c3924b8 100644
+--- a/src/usr/hwpf/hwp/dram_training/palmetto_vddr.C
++++ b/src/usr/hwpf/hwp/dram_training/palmetto_vddr.C
+@@ -168,6 +168,7 @@ static errlHndl_t for_each_vddr_domain_with_functional_memory(
+     std::sort(l_membufTargetList.begin(), l_membufTargetList.end(),
+         compareTargetsGpioInfos);
+ 
++/*
+     // Prune out targets with non-unique GPIO info
+     std::vector<TARGETING::TargetHandle_t>::iterator
+         pInvalidEntries = std::unique(
+@@ -175,6 +176,7 @@ static errlHndl_t for_each_vddr_domain_with_functional_memory(
+             l_membufTargetList.end(),
+             areTargetsGpioInfoEqual);
+     l_membufTargetList.erase(pInvalidEntries,l_membufTargetList.end());
++*/
+ 
+     // Invoke callback for one Centaur per unique VDDR domain
+     for (TargetHandleList::iterator
+@@ -274,6 +276,7 @@ static errlHndl_t pca95xGpioWriteBit(TARGETING::Target * i_target,
+                            i_val);
+ 
+     // Configure gpio bit as output (if necessary).
++/*    
+     if(!err)
+     {
+         err = pca95xGpioSetBit(i_target,
+@@ -281,6 +284,7 @@ static errlHndl_t pca95xGpioWriteBit(TARGETING::Target * i_target,
+                                i_gpio_pin,
+                                PCA95X_GPIO_CONFIG_OUTPUT);
+     }
++*/
+ 
+     return err;
+ }
+-- 
+2.16.2.windows.1
+
diff --git a/openpower/patches/p8dtu-patches/hostboot-p8/0004-change-esel-command-netfn-to-IBM-0x3a.patch b/openpower/patches/p8dtu-patches/hostboot-p8/0004-change-esel-command-netfn-to-IBM-0x3a.patch
new file mode 100644
index 0000000..3215bc2
--- /dev/null
+++ b/openpower/patches/p8dtu-patches/hostboot-p8/0004-change-esel-command-netfn-to-IBM-0x3a.patch
@@ -0,0 +1,26 @@
+From eee0dcae475618bef686198baf28c750de9a63a5 Mon Sep 17 00:00:00 2001
+From: Jim Yuan <jim.yuan@supermicro.com>
+Date: Tue, 11 Oct 2016 10:00:15 -0700
+Subject: [PATCH 04/14] change esel command netfn to IBM 0x3a
+
+Signed-off-by: Jim Yuan <jim.yuan@supermicro.com>
+---
+ src/include/usr/ipmi/ipmiif.H | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/include/usr/ipmi/ipmiif.H b/src/include/usr/ipmi/ipmiif.H
+index 5c2444f26..94fca5fb6 100644
+--- a/src/include/usr/ipmi/ipmiif.H
++++ b/src/include/usr/ipmi/ipmiif.H
+@@ -265,7 +265,7 @@ namespace IPMI
+ 
+     //AMI-specific storage messages
+     inline const command_t partial_add_esel(void)
+-    { return std::make_pair(NETFUN_AMI, 0xf0); }
++	{ return std::make_pair(NETFUN_IBM, 0xf0); }
+ 
+     // event messages
+     inline const command_t platform_event(void)
+-- 
+2.16.2.windows.1
+
diff --git a/openpower/patches/p8dtu-patches/hostboot-p8/0005-change-pnor-response-command-to-0x7.patch b/openpower/patches/p8dtu-patches/hostboot-p8/0005-change-pnor-response-command-to-0x7.patch
new file mode 100644
index 0000000..943b471
--- /dev/null
+++ b/openpower/patches/p8dtu-patches/hostboot-p8/0005-change-pnor-response-command-to-0x7.patch
@@ -0,0 +1,26 @@
+From 50ae9cf95223a5f6492e7e515ccef9d4499ef823 Mon Sep 17 00:00:00 2001
+From: Jim Yuan <jim.yuan@supermicro.com>
+Date: Tue, 11 Oct 2016 10:03:01 -0700
+Subject: [PATCH 05/14] change pnor response command to 0x7
+
+Signed-off-by: Jim Yuan <jim.yuan@supermicro.com>
+---
+ src/include/usr/ipmi/ipmiif.H | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/include/usr/ipmi/ipmiif.H b/src/include/usr/ipmi/ipmiif.H
+index 94fca5fb6..4b41cb3bc 100644
+--- a/src/include/usr/ipmi/ipmiif.H
++++ b/src/include/usr/ipmi/ipmiif.H
+@@ -289,7 +289,7 @@ namespace IPMI
+     { return std::make_pair(NETFUN_IBM, 0x07); }
+ 
+     inline const command_t pnor_response(void)
+-    { return std::make_pair(NETFUN_IBM, 0x08); }
++	{ return std::make_pair(NETFUN_IBM, 0x07); }
+ 
+     inline const command_t hiomap_event(void)
+     { return std::make_pair(NETFUN_IBM, 0x0f); }
+-- 
+2.16.2.windows.1
+
diff --git a/openpower/patches/p8dtu-patches/hostboot-p8/0006-send-board-ID-to-ipmi.patch b/openpower/patches/p8dtu-patches/hostboot-p8/0006-send-board-ID-to-ipmi.patch
new file mode 100644
index 0000000..58ddb2d
--- /dev/null
+++ b/openpower/patches/p8dtu-patches/hostboot-p8/0006-send-board-ID-to-ipmi.patch
@@ -0,0 +1,108 @@
+From 73ba34b74551c5f61a1f2c93f48a7f59cb576cd6 Mon Sep 17 00:00:00 2001
+From: Jim Yuan <jim.yuan@supermicro.com>
+Date: Tue, 11 Oct 2016 10:26:14 -0700
+Subject: [PATCH 06/14] send board ID to ipmi
+
+Signed-off-by: Jim Yuan <jim.yuan@supermicro.com>
+---
+ src/include/usr/ipmi/ipmiif.H                      |  6 ++++-
+ src/include/usr/ipmi/ipmipowerstate.H              |  2 +-
+ .../initservice/istepdispatcher/istepdispatcher.C  | 11 ++++++++
+ src/usr/ipmiext/ipmipowerstate.C                   | 29 ++++++++++++++++++++++
+ 4 files changed, 46 insertions(+), 2 deletions(-)
+
+diff --git a/src/include/usr/ipmi/ipmiif.H b/src/include/usr/ipmi/ipmiif.H
+index 4b41cb3bc..8039adbf7 100644
+--- a/src/include/usr/ipmi/ipmiif.H
++++ b/src/include/usr/ipmi/ipmiif.H
+@@ -299,7 +299,11 @@ namespace IPMI
+     // user defined power limit from the BMC.
+     inline const command_t get_power_limit(void)
+     { return std::make_pair(NETFUN_GRPEXT, 0x03); }
+-
++	
++	//SMC	  
++	inline const command_t set_board_id(void)
++	{ return std::make_pair(NETFUN_NONE, 0x20); }
++	
+     // Some helper messages
+     // Used to create an empty message for reception
+     inline const command_t no_command(void)
+diff --git a/src/include/usr/ipmi/ipmipowerstate.H b/src/include/usr/ipmi/ipmipowerstate.H
+index b65275075..e943e8b66 100644
+--- a/src/include/usr/ipmi/ipmipowerstate.H
++++ b/src/include/usr/ipmi/ipmipowerstate.H
+@@ -78,7 +78,7 @@ enum ACPI_DEVICE_POWER_STATE_TO_SET
+  */
+ errlHndl_t setACPIPowerState();
+ 
+-
++errlHndl_t SmcsetBoardId();
+ } // namespace
+ 
+ #endif
+diff --git a/src/usr/initservice/istepdispatcher/istepdispatcher.C b/src/usr/initservice/istepdispatcher/istepdispatcher.C
+index 16f1c8a01..0f9731094 100644
+--- a/src/usr/initservice/istepdispatcher/istepdispatcher.C
++++ b/src/usr/initservice/istepdispatcher/istepdispatcher.C
+@@ -284,6 +284,17 @@ void IStepDispatcher::init(errlHndl_t &io_rtaskRetErrl)
+             err_ipmi->collectTrace("INITSVC", 1024);
+             errlCommit(err_ipmi, INITSVC_COMP_ID );
+         }
++		//send board ID
++		errlHndl_t err_ipmi1 = IPMI::SmcsetBoardId();
++		
++		if(err_ipmi1)
++		{
++		TRACFCOMP(g_trac_initsvc,
++						   "init: ERROR: IPMI set Board Id Failed");
++			 err_ipmi->collectTrace("INITSVC", 1024);
++			 errlCommit(err_ipmi1, INITSVC_COMP_ID );
++		 }
++		
+ #endif
+ 
+ 
+diff --git a/src/usr/ipmiext/ipmipowerstate.C b/src/usr/ipmiext/ipmipowerstate.C
+index 30c2a70ef..f8e61f82b 100644
+--- a/src/usr/ipmiext/ipmipowerstate.C
++++ b/src/usr/ipmiext/ipmipowerstate.C
+@@ -50,6 +50,35 @@ namespace IPMI
+ /******************************************************************************/
+ // Functions
+ /******************************************************************************/
++errlHndl_t SmcsetBoardId()
++{
++    errlHndl_t err_ipmi = NULL;
++
++    size_t len = 10; 
++
++    //create request data buffer
++    uint8_t* data = new uint8_t[len];
++
++    IPMI::completion_code cc = IPMI::CC_UNKBAD;
++    //P8DTU board ID 0933
++    data[0] = 0x33;
++    data[1] = 0x9;
++    memset(&data[2], 0, 8);
++    err_ipmi = IPMI::sendrecv(IPMI::set_board_id(), cc, len, data);
++
++    //cleanup buffer
++    delete[] data;
++
++    if(cc != IPMI::CC_OK)
++    {
++        IPMI_TRAC("Set board id: BMC returned not ok CC[%x]",cc);
++        // should we log error and then retry?
++        // what happens if the communication is broken
++        // reset will try and set it again.
++    }
++
++    return err_ipmi;
++}
+ 
+ errlHndl_t setACPIPowerState()
+ {
+-- 
+2.16.2.windows.1
+
diff --git a/openpower/patches/p8dtu-patches/hostboot-p8/0007-read-riser-id-from-CPLD.patch b/openpower/patches/p8dtu-patches/hostboot-p8/0007-read-riser-id-from-CPLD.patch
new file mode 100644
index 0000000..af19f74
--- /dev/null
+++ b/openpower/patches/p8dtu-patches/hostboot-p8/0007-read-riser-id-from-CPLD.patch
@@ -0,0 +1,95 @@
+From 94de2f7f944a2cabbdf699adcbc6679a091ad324 Mon Sep 17 00:00:00 2001
+From: Leoluo <leoluo@supermicro.com>
+Date: Tue, 8 Mar 2016 17:01:26 -0800
+Subject: [PATCH 07/14] read riser id from CPLD
+
+Signed-off-by: Jim Yuan <jim.yuan@supermicro.com>
+---
+ src/include/usr/ipmi/ipmiif.H                  |  3 ++
+ src/usr/hwpf/hwp/nest_chiplets/nest_chiplets.C | 42 +++++++++++++++++++++++++-
+ 2 files changed, 44 insertions(+), 1 deletion(-)
+
+diff --git a/src/include/usr/ipmi/ipmiif.H b/src/include/usr/ipmi/ipmiif.H
+index 8039adbf7..9dfd8ee63 100644
+--- a/src/include/usr/ipmi/ipmiif.H
++++ b/src/include/usr/ipmi/ipmiif.H
+@@ -238,6 +238,9 @@ namespace IPMI
+     inline const command_t get_capabilities(void)
+     { return std::make_pair(NETFUN_APP, 0x36); }
+ 
++    inline const command_t master_readwrite(void)
++    { return std::make_pair(NETFUN_APP, 0x52); }
++
+ 
+     // Chassis messages
+     inline const command_t chassis_power_off(void)
+diff --git a/src/usr/hwpf/hwp/nest_chiplets/nest_chiplets.C b/src/usr/hwpf/hwp/nest_chiplets/nest_chiplets.C
+index d122ae4de..73f1a0a3f 100644
+--- a/src/usr/hwpf/hwp/nest_chiplets/nest_chiplets.C
++++ b/src/usr/hwpf/hwp/nest_chiplets/nest_chiplets.C
+@@ -58,6 +58,8 @@
+ //  MVPD
+ #include <devicefw/userif.H>
+ #include <vpd/mvpdenums.H>
++#include <ipmi/ipmiif.H>
++
+ 
+ #include <config.h>
+ 
+@@ -1743,7 +1745,40 @@ errlHndl_t computeProcPcieConfigAttrs(
+             effectiveLaneSwap[iop] = laneSwap;
+         }
+ #endif
+-
++   uint8_t riser_id = 0 ;
++	errlHndl_t l_err = NULL;
++	
++	
++	size_t len = 4;
++	
++	//create request data buffer
++	uint8_t* data = new uint8_t[len];
++	
++	IPMI::completion_code cc = IPMI::CC_UNKBAD;
++	
++	data[0] = 0x3;  
++	data[1] = 0x70;  
++	data[2] = 0x1;  
++	data[3] = 0x1;  
++	l_err = IPMI::sendrecv(IPMI::master_readwrite(), cc, len, data);
++	
++	if( l_err == NULL )
++	{
++		if( cc == IPMI::CC_OK )
++		{
++		riser_id = data[0];
++		}
++		
++		delete[] data;
++	}
++
++
++       if((i_pProcChipTarget->getAttr<TARGETING::ATTR_HUID>()) == 0x50001 && (riser_id == 0xE) ){	   	
++		effectiveLaneMask[1][0] = 0xFFFF;
++	    effectiveLaneMask[1][1] = 0x0000;      
++          effectiveLaneSwap[1] = 0x0;
++       	}
++	   
+         i_pProcChipTarget->setAttr<
+             TARGETING::ATTR_PROC_PCIE_LANE_MASK>(effectiveLaneMask);
+ 
+@@ -1797,6 +1832,11 @@ errlHndl_t computeProcPcieConfigAttrs(
+             iopConfig = laneConfigItr->laneConfig;
+             phbActiveMask = laneConfigItr->phbActive;
+ 
++			if((i_pProcChipTarget->getAttr<TARGETING::ATTR_HUID>()) == 0x50001 && (riser_id == 0xE) ){
++	   	       iopConfig = 0 ;
++	           phbActiveMask = PHB0_MASK|PHB1_MASK;
++       	      }
++
+             // Disable applicable PHBs
+             phbActiveMask &= (~disabledPhbs);
+             (void)_deconfigPhbsBasedOnPciState(
+-- 
+2.16.2.windows.1
+
diff --git a/openpower/patches/p8dtu-patches/hostboot-p8/0008-Fill-board-mfg-time-and-date-in-FRU3.-It-is-read-fro.patch b/openpower/patches/p8dtu-patches/hostboot-p8/0008-Fill-board-mfg-time-and-date-in-FRU3.-It-is-read-fro.patch
new file mode 100644
index 0000000..41c24b3
--- /dev/null
+++ b/openpower/patches/p8dtu-patches/hostboot-p8/0008-Fill-board-mfg-time-and-date-in-FRU3.-It-is-read-fro.patch
@@ -0,0 +1,99 @@
+From ed60d5736559c4e100e5db20de942a584b58b6f0 Mon Sep 17 00:00:00 2001
+From: Jim Yuan <jim.yuan@supermicro.com>
+Date: Wed, 25 May 2016 15:24:40 -0700
+Subject: [PATCH 08/14] Fill board mfg time and date in FRU3. It is read from
+ PVPD:VNDR:IN.
+
+Signed-off-by: Jim Yuan <jim.yuan@supermicro.com>
+---
+ src/usr/ipmiext/ipmifruinv.C | 65 +++++++++++++++++++++++++++++++++-----------
+ 1 file changed, 49 insertions(+), 16 deletions(-)
+
+diff --git a/src/usr/ipmiext/ipmifruinv.C b/src/usr/ipmiext/ipmifruinv.C
+index 23aaf9b97..11fbd7677 100644
+--- a/src/usr/ipmiext/ipmifruinv.C
++++ b/src/usr/ipmiext/ipmifruinv.C
+@@ -1279,31 +1279,64 @@ errlHndl_t backplaneIpmiFruInv::buildChassisInfoArea(
+     return l_errl;
+ }
+ 
++// Quick hexdigit to binary converter.
++// Hopefull someday to replaced by strtoul
++uint8_t aschex2bin(char c)
++{
++    if(c >= 'a' && c <= 'f')
++    {
++        c = c + 10 - 'a';
++    }
++    else if (c >= 'A' && c <= 'F')
++    {
++        c = c + 10 - 'A';
++    }
++    else if (c >= '0' && c <= '9')
++    {
++       c -= '0';
++    }
++    else return 0;// else it's not a hex digit, return 0
++
++    return c;
++}
++
++
+ errlHndl_t backplaneIpmiFruInv::buildBoardInfoArea(
+                                               std::vector<uint8_t> &io_data)
+ {
+     errlHndl_t l_errl = NULL;
++	std::vector<uint8_t> oem_data; //jim052316
++	uint8_t i, data1, data2, data3;//jim052316
+ 
+     do {
+         //Set formatting data that goes at the beginning of the record
+         preFormatProcessing(io_data, true);
+ 
+-        // Set Mfg Build date
+-        // Grab VPD data into seperate data vector
+-        std::vector<uint8_t> mfgDateData;
+-        l_errl = addVpdData(mfgDateData, PVPD::OPFR, PVPD::MB, false, false);
+-        if (l_errl)
+-        {
+-            // The MB keyword was optional on older cards so just ignore
+-            //  any errors
+-            delete l_errl;
+-            l_errl = NULL;
+-        }
+-        else
+-        {
+-            // Pass that to the function that sets the Build date
+-            setMfgData(io_data, mfgDateData);
+-        }
++        l_errl = addVpdData(oem_data, PVPD::VNDR, PVPD::IN, true);
++        if (l_errl) { break; }
++
++		for (i=0; i < oem_data.size(); i++)
++		TRACFCOMP(g_trac_ipmi,"Jimdebug board VNDR:IN data is 0x%x", oem_data[i]);
++
++		data1 = (aschex2bin(oem_data[5]) << 4) | aschex2bin(oem_data[6]);//jim052416
++		data2 = (aschex2bin(oem_data[3]) << 4) | aschex2bin(oem_data[4]);
++		data3 = (aschex2bin(oem_data[1]) << 4) | aschex2bin(oem_data[2]);  
++
++		
++		TRACFCOMP(g_trac_ipmi,"Jimdebug push data1 is 0x%x", data1);
++		TRACFCOMP(g_trac_ipmi,"Jimdebug push data2 is 0x%x", data2);
++		TRACFCOMP(g_trac_ipmi,"Jimdebug push data3 is 0x%x", data3);
++
++		
++        io_data.push_back(data1); 
++        io_data.push_back(data2);
++        io_data.push_back(data3);
++
++
++        //Set MFG Date/Time - Blank
++        //io_data.push_back(0x5E); //jim52016
++        //io_data.push_back(0x9A);
++        //io_data.push_back(0xA3);
+ 
+         //Set Vendor Name - ascii formatted data
+         l_errl = addVpdData(io_data, PVPD::OPFR, PVPD::VN, true);
+-- 
+2.16.2.windows.1
+
diff --git a/openpower/patches/p8dtu-patches/hostboot-p8/0009-Hardcode-DIMM-pairing-for-RAS.-Fix-the-issue-that-MB.patch b/openpower/patches/p8dtu-patches/hostboot-p8/0009-Hardcode-DIMM-pairing-for-RAS.-Fix-the-issue-that-MB.patch
new file mode 100644
index 0000000..c6f4a1c
--- /dev/null
+++ b/openpower/patches/p8dtu-patches/hostboot-p8/0009-Hardcode-DIMM-pairing-for-RAS.-Fix-the-issue-that-MB.patch
@@ -0,0 +1,45 @@
+From 9d8e17897f398f1f750c87c4dcf58fe9e64ffed9 Mon Sep 17 00:00:00 2001
+From: Jim Yuan <jim.yuan@supermicro.com>
+Date: Thu, 7 Jul 2016 15:53:31 -0700
+Subject: [PATCH 09/14] Hardcode DIMM pairing for RAS. Fix the issue that MBA0
+ Memory UE on Cenatur Chip4 brought all dimms under Proc2 offline.
+
+Signed-off-by: Jim Yuan <jim.yuan@supermicro.com>
+---
+ src/usr/hwas/common/deconfigGard.C | 19 ++++++++++++++++++-
+ 1 file changed, 18 insertions(+), 1 deletion(-)
+
+diff --git a/src/usr/hwas/common/deconfigGard.C b/src/usr/hwas/common/deconfigGard.C
+index fa266c881..bd4e4fe4c 100644
+--- a/src/usr/hwas/common/deconfigGard.C
++++ b/src/usr/hwas/common/deconfigGard.C
+@@ -980,8 +980,25 @@ Target * findPartnerForMcs(const Target *i_startMcs)
+     // Declare partner MCS CHIP_UNIT
+     ATTR_CHIP_UNIT_type partnerMcsUnit = 0;
+ 
++	// Add temp code to handle different MCS pairing
++	if (startMcsUnit == 0)
++	{
++		partnerMcsUnit = 4;
++	}
++	else if (startMcsUnit == 1)
++	{
++		partnerMcsUnit = 5;
++	}
++	else if (startMcsUnit == 4)
++	{
++		partnerMcsUnit = 0;
++	}
++	else if (startMcsUnit == 5)
++	{
++		partnerMcsUnit = 1;
++	}
+     // If CHIP_UNIT is even, its partner will be the next MCS
+-    if (!(startMcsUnit % 2))
++    else if (!(startMcsUnit % 2))
+     {
+         partnerMcsUnit = startMcsUnit + 1;
+     }
+-- 
+2.16.2.windows.1
+
diff --git a/openpower/patches/p8dtu-patches/hostboot-p8/0010-Adjust-APSS-gain-and-offset-from-PWS-FRU-information.patch b/openpower/patches/p8dtu-patches/hostboot-p8/0010-Adjust-APSS-gain-and-offset-from-PWS-FRU-information.patch
new file mode 100644
index 0000000..172d6ac
--- /dev/null
+++ b/openpower/patches/p8dtu-patches/hostboot-p8/0010-Adjust-APSS-gain-and-offset-from-PWS-FRU-information.patch
@@ -0,0 +1,308 @@
+From bdd6ce1bbfe0ee77feefe84662e961fb253c6195 Mon Sep 17 00:00:00 2001
+From: Jim Yuan <jim.yuan@supermicro.com>
+Date: Fri, 22 Jul 2016 17:50:57 -0700
+Subject: [PATCH 10/14] Adjust APSS gain and offset from PWS FRU information.
+
+Signed-off-by: Jim Yuan <jim.yuan@supermicro.com>
+---
+ src/include/usr/ipmi/ipmiif.H                      |   4 +-
+ src/usr/htmgt/htmgt_cfgdata.C                      |   2 +
+ src/usr/hwpf/hwp/start_payload/start_payload.C     | 212 +++++++++++++++++++++
+ .../common/xmltohb/attribute_types_hb.xml          |   2 +
+ 4 files changed, 218 insertions(+), 2 deletions(-)
+
+diff --git a/src/include/usr/ipmi/ipmiif.H b/src/include/usr/ipmi/ipmiif.H
+index 9dfd8ee63..5416ddca0 100644
+--- a/src/include/usr/ipmi/ipmiif.H
++++ b/src/include/usr/ipmi/ipmiif.H
+@@ -251,8 +251,8 @@ namespace IPMI
+     inline const command_t set_sel_time(void)
+     { return std::make_pair(NETFUN_STORAGE, 0x49); }
+ 
+-    inline const command_t read_fru_data(void)
+-    { return std::make_pair(NETFUN_STORAGE, 0x11); }
++	inline const command_t read_fru_data(void)
++	{ return std::make_pair(NETFUN_STORAGE, 0x11); }	
+ 
+     inline const command_t write_fru_data(void)
+     { return std::make_pair(NETFUN_STORAGE, 0x12); }
+diff --git a/src/usr/htmgt/htmgt_cfgdata.C b/src/usr/htmgt/htmgt_cfgdata.C
+index 19e7b21bf..7c42abdb6 100644
+--- a/src/usr/htmgt/htmgt_cfgdata.C
++++ b/src/usr/htmgt/htmgt_cfgdata.C
+@@ -1025,6 +1025,8 @@ void getApssMessageData(uint8_t* o_data,
+     ATTR_ADC_CHANNEL_OFFSETS_type offset;
+     sys->tryGetAttr<ATTR_ADC_CHANNEL_OFFSETS>(offset);
+ 
++    TMGT_INF("getApssMessageData: gain is %d, offset is %d", gain[15], offset[15]); //jim
++
+     CPPASSERT(sizeof(function) == sizeof(ground));
+     CPPASSERT(sizeof(function) == sizeof(gain));
+     CPPASSERT(sizeof(function) == sizeof(offset));
+diff --git a/src/usr/hwpf/hwp/start_payload/start_payload.C b/src/usr/hwpf/hwp/start_payload/start_payload.C
+index 5d7865a12..ad155f19e 100644
+--- a/src/usr/hwpf/hwp/start_payload/start_payload.C
++++ b/src/usr/hwpf/hwp/start_payload/start_payload.C
+@@ -88,6 +88,7 @@
+ #include    <algorithm>
+ #include    <config.h>
+ #include    <ipmi/ipmiwatchdog.H>
++#include    <ipmi/ipmiif.H> //jim
+ #include    <vpd/vpd_if.H>
+ 
+ #include    <hwpf/hwpf_reasoncodes.H>
+@@ -95,6 +96,7 @@
+ //  Uncomment these files as they become available:
+ // #include    "host_start_payload/host_start_payload.H"
+ 
++
+ namespace   START_PAYLOAD
+ {
+ 
+@@ -277,6 +279,214 @@ errlHndl_t setMaxPstate ( void )
+ }
+ #endif
+ 
++//jim-start
++enum
++{
++PWS_1600 = 0,
++PWS_1000 = 1,
++PWS_1200 = 2,
++PWS_UNKNOWN = 0xFE,
++};
++
++uint8_t getPSUFRUFromIPMICommands(void)
++{
++	errlHndl_t l_err = NULL;
++	uint8_t* frudata = new uint8_t[120];
++	size_t len = 4;
++	uint8_t fru_header_version = 0;
++	uint8_t j = 0, loop_break = 0, read_offset = 0;
++	
++	//create request data buffer
++	uint8_t* data = new uint8_t[len];
++	
++	IPMI::completion_code cc = IPMI::CC_UNKBAD;
++	
++	data[0] = 60; //try to read from PWS1. 60-PWS1, 61-PWS2
++	data[1] = 0x0;  
++	data[2] = 0x0;  
++	data[3] = 8;  
++	l_err = IPMI::sendrecv(IPMI::read_fru_data(), cc, len, data);
++	
++	for (uint8_t i = 0; i <= 8; i++ )
++	fru_header_version = data[1] & 0xF; //normal should be 0x01.
++	TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "fru header version is %x", fru_header_version);
++	delete[] data;	
++	
++	if((l_err == NULL) && (cc == IPMI::CC_OK) && (fru_header_version == 1))
++	{		
++		TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "could get FRU from PWS1");
++
++		while ((l_err == NULL) && (loop_break == 0) && (read_offset < 100))
++		{			
++		//create request data buffer
++		len = 4; //must set len every time
++		uint8_t* data = new uint8_t[len];
++	
++		IPMI::completion_code cc = IPMI::CC_UNKBAD;
++	
++		data[0] = 60;  //read from PWS1
++		data[1] = read_offset;  
++		data[2] = 0x0;  
++		data[3] = 8;  
++		l_err = IPMI::sendrecv(IPMI::read_fru_data(), cc, len, data);
++		
++		if (cc != IPMI::CC_OK) loop_break = 1;
++		
++		read_offset += 8;
++		for (uint8_t i = 1; i <= 8; i++ )
++			{
++			frudata[j] = data[i];
++			j++;
++			}
++		delete[] data;	
++		}
++		
++
++	}
++	else	
++	{
++		TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "could get FRU from PWS2");
++
++		while ((l_err == NULL) && (loop_break == 0) && (read_offset < 100))
++		{			
++		//create request data buffer
++		len = 4;//must set len every time
++		uint8_t* data = new uint8_t[len];
++	
++		IPMI::completion_code cc = IPMI::CC_UNKBAD;
++	
++		data[0] = 61;  //read from PWS2
++		data[1] = read_offset;  
++		data[2] = 0x0;  
++		data[3] = 8;  
++		l_err = IPMI::sendrecv(IPMI::read_fru_data(), cc, len, data);
++		
++		if (cc != IPMI::CC_OK) loop_break = 1;
++		
++		read_offset += 8;
++		for (uint8_t i = 1; i <= 8; i++ )
++			{
++			frudata[j] = data[i];
++			j++;
++			}	
++		delete[] data;
++		}
++		
++	}
++
++	uint8_t product_info_offset, manufacture_name_offset, manufacture_name_length, product_name_offset, product_name_length; 
++	uint8_t product_partnumber_offset, product_partnumber_length;
++	uint8_t fru_offset, powerSupplyFru = PWS_UNKNOWN;
++	uint8_t pws1600[] = {'P','W','S','-','1','K','6','2','A','-','1','R'};
++	uint8_t pws1000[] = {'P','W','S','-','1','K','0','2','A','-','1','R'};
++	uint8_t pws1200[] = {'P','W','S','-','1','K','2','2','A','-','1','R'};
++
++	//code to calculate product part number size and offset. should use structure. refer to FRU spec.		
++	product_info_offset = frudata[4] * 8;
++	manufacture_name_offset = product_info_offset + 3;
++	manufacture_name_length = frudata[manufacture_name_offset] & 0x3F;
++	product_name_offset = manufacture_name_offset + manufacture_name_length + 1;
++	product_name_length = frudata[product_name_offset] & 0x3F;
++	product_partnumber_offset = product_name_offset + product_name_length + 1;
++	product_partnumber_length = frudata[product_partnumber_offset] & 0x3F;
++	TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "product_partnumber_length is %x", product_partnumber_length);
++	fru_offset = product_partnumber_offset + 1;
++	
++	if (product_partnumber_length == 12)
++	{
++		for (uint8_t i = 0; pws1600[i] == frudata[fru_offset + i] ; i ++)
++			if (i == 11)
++			powerSupplyFru = PWS_1600;
++		
++		for (uint8_t i = 0; pws1000[i] == frudata[fru_offset + i] ; i ++)
++			if (i == 11)
++			powerSupplyFru = PWS_1000;
++		
++		for (uint8_t i = 0; pws1200[i] == frudata[fru_offset + i] ; i ++)
++			if (i == 11)
++			powerSupplyFru = PWS_1200;
++	}
++	else	
++		powerSupplyFru = PWS_UNKNOWN;
++
++	TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "powerSupplyFru is %x", powerSupplyFru);
++	
++	return powerSupplyFru;
++
++}
++//find apss channel number from XML.
++enum
++{
++V12_SENSE = 0,
++PROC0_POWER = 1,
++PROC1_POWER = 2,
++PCIE_PROC0_POWER = 5,
++PCIE_PROC1_POWER = 6,	
++TOTAL_SYSTEM_POWER = 15,	
++};	
++
++void setAPSSGainOffsetFromPWSInfo(void)
++{
++	TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "before load OCC");
++
++	//Get Gain/Offset ATTR
++	TARGETING::Target* sys = NULL;
++	targetService().getTopLevelTarget(sys);
++
++	ATTR_ADC_CHANNEL_GAINS_type gain;
++	sys->tryGetAttr<ATTR_ADC_CHANNEL_GAINS>(gain);
++
++	ATTR_ADC_CHANNEL_OFFSETS_type offset;
++	sys->tryGetAttr<ATTR_ADC_CHANNEL_OFFSETS>(offset);
++
++	TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "gain is %d, offset is %d", gain[15], offset[15]);
++
++	//Note that the function/ APSS channel ids can be indirect. I've hardcoded here, you will need to look at the XML to find the channel/function number that matches
++	//const uint8_t SYS_CHANNEL = 15; //APSS Channel 15 is sys power, ie the gain/offset we need to tweak
++
++	//Get power supply data from BMC
++	uint8_t powerSupplyFru = getPSUFRUFromIPMICommands();
++	
++	switch(powerSupplyFru)
++	{
++	case PWS_1600: //PWS-1K62A-1R (1600W):
++	gain[TOTAL_SYSTEM_POWER] = 67800;
++	offset[TOTAL_SYSTEM_POWER] = 0;
++	break;
++
++	case PWS_1000: //PWS-1K02A-1R (1000W):
++	gain[TOTAL_SYSTEM_POWER] = 41500;
++	offset[TOTAL_SYSTEM_POWER] = 0;
++	break;
++
++	case PWS_1200: //PWS-1K22A-1R (1200W):
++	gain[TOTAL_SYSTEM_POWER] = 50000; 
++	offset[TOTAL_SYSTEM_POWER] = 0;
++	break;
++
++	default:
++	//Do nothing, leave defaults
++	//Gen error for user attention?
++	break;
++	}
++
++	//Now write the attributes back so they get picked up by OCC code
++	if (!sys->trySetAttr<ATTR_ADC_CHANNEL_GAINS>(gain))
++	{
++	//unlikely, crash
++	//Emit failing trace/console data
++	TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "set gain failed");
++	assert(0);
++	}
++
++	if (!sys->trySetAttr<ATTR_ADC_CHANNEL_OFFSETS>(offset))
++	{
++	//unlikely, crash
++	//Emit failing trace/console data
++	TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "set offset failed");
++	assert(0);
++	}
++}
+ //
+ //  Wrapper function to call host_runtime_setup
+ //
+@@ -318,6 +528,8 @@ void*    call_host_runtime_setup( void    *io_pArgs )
+             break;
+         }
+ 
++	setAPSSGainOffsetFromPWSInfo(); //jim add code before activate OCC. START_OCC_DURING_BOOT is defined in config.
++
+         bool l_activateOCC = is_avp_load();
+ 
+ #ifdef CONFIG_START_OCC_DURING_BOOT
+diff --git a/src/usr/targeting/common/xmltohb/attribute_types_hb.xml b/src/usr/targeting/common/xmltohb/attribute_types_hb.xml
+index c4eb6603d..64a0c9bae 100644
+--- a/src/usr/targeting/common/xmltohb/attribute_types_hb.xml
++++ b/src/usr/targeting/common/xmltohb/attribute_types_hb.xml
+@@ -747,6 +747,7 @@
+     </simpleType>
+     <persistency>non-volatile</persistency>
+     <readable/>
++    <writeable/>
+ </attribute>
+ 
+ <attribute>
+@@ -758,6 +759,7 @@
+     </simpleType>
+     <persistency>non-volatile</persistency>
+     <readable/>
++    <writeable/>
+ </attribute>
+ 
+ <attribute>
+-- 
+2.16.2.windows.1
+
diff --git a/openpower/patches/p8dtu-patches/hostboot-p8/0012-Set-OPAL_MODEL-to-p8dtu1u-or-p8dtu2u-for-1U-and-2U-s.patch b/openpower/patches/p8dtu-patches/hostboot-p8/0012-Set-OPAL_MODEL-to-p8dtu1u-or-p8dtu2u-for-1U-and-2U-s.patch
new file mode 100644
index 0000000..bc4f492
--- /dev/null
+++ b/openpower/patches/p8dtu-patches/hostboot-p8/0012-Set-OPAL_MODEL-to-p8dtu1u-or-p8dtu2u-for-1U-and-2U-s.patch
@@ -0,0 +1,118 @@
+From 1e6bb450cf94fc3ade70f82703e6c57a30bbebaa Mon Sep 17 00:00:00 2001
+From: Jim Yuan <jim.yuan@supermicro.com>
+Date: Wed, 10 Aug 2016 10:41:32 -0700
+Subject: [PATCH 12/14] Set OPAL_MODEL to p8dtu1u or p8dtu2u for 1U and 2U
+ system.
+
+Signed-off-by: Jim Yuan <jim.yuan@supermicro.com>
+---
+ src/usr/hwpf/hwp/start_payload/start_payload.C     | 66 +++++++++++++++++++++-
+ .../common/xmltohb/attribute_types_hb.xml          |  1 +
+ 2 files changed, 66 insertions(+), 1 deletion(-)
+
+diff --git a/src/usr/hwpf/hwp/start_payload/start_payload.C b/src/usr/hwpf/hwp/start_payload/start_payload.C
+index ad155f19e..80e62a0b6 100644
+--- a/src/usr/hwpf/hwp/start_payload/start_payload.C
++++ b/src/usr/hwpf/hwp/start_payload/start_payload.C
+@@ -89,6 +89,8 @@
+ #include    <config.h>
+ #include    <ipmi/ipmiwatchdog.H>
+ #include    <ipmi/ipmiif.H> //jim
++#include	<string.h> //jim
++
+ #include    <vpd/vpd_if.H>
+ 
+ #include    <hwpf/hwpf_reasoncodes.H>
+@@ -487,6 +489,67 @@ void setAPSSGainOffsetFromPWSInfo(void)
+ 	assert(0);
+ 	}
+ }
++
++
++void setOpalMode (void)
++{
++
++ uint8_t riser_id = 0 ;
++ errlHndl_t l_err = NULL; 
++ size_t len = 4;
++ 
++ //create request data buffer
++ uint8_t* data = new uint8_t[len];
++ 
++ IPMI::completion_code cc = IPMI::CC_UNKBAD;
++ 
++ data[0] = 0x3;  
++ data[1] = 0x70;  
++ data[2] = 0x1;  
++ data[3] = 0x2;  //offset 0x2 for UIO info
++ l_err = IPMI::sendrecv(IPMI::master_readwrite(), cc, len, data);
++ 
++ if( l_err == NULL )
++ {
++	 if( cc == IPMI::CC_OK )
++	 {
++	 riser_id = data[0];
++	 }
++	 
++	 delete[] data;
++ }
++
++ATTR_OPAL_MODEL_type l_model = {0};
++
++TARGETING::Target* sys = NULL;
++targetService().getTopLevelTarget(sys);
++
++sys->tryGetAttr<TARGETING::ATTR_OPAL_MODEL>(l_model);
++TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "OPAL Mode is %s", l_model);
++TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "Riser ID is %d", riser_id);
++
++if (riser_id == 0x9)
++	{
++	TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "1U OPAL Mode");
++	strcpy (l_model, "supermicro,p8dtu1u");
++
++	}
++else  //(riser_id == 0x19)
++	{
++	TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "2U OPAL Mode");
++	strcpy (l_model, "supermicro,p8dtu2u");
++	}
++
++if (!sys->trySetAttr<TARGETING::ATTR_OPAL_MODEL>(l_model))
++	{
++	TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "set OPAL Mode failed");
++	assert(0);
++	}
++
++sys->tryGetAttr<TARGETING::ATTR_OPAL_MODEL>(l_model);
++TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "after set, OPAL Mode is %s", l_model);
++
++}
+ //
+ //  Wrapper function to call host_runtime_setup
+ //
+@@ -529,7 +592,8 @@ void*    call_host_runtime_setup( void    *io_pArgs )
+         }
+ 
+ 	setAPSSGainOffsetFromPWSInfo(); //jim add code before activate OCC. START_OCC_DURING_BOOT is defined in config.
+-
++	setOpalMode(); //jim
++	
+         bool l_activateOCC = is_avp_load();
+ 
+ #ifdef CONFIG_START_OCC_DURING_BOOT
+diff --git a/src/usr/targeting/common/xmltohb/attribute_types_hb.xml b/src/usr/targeting/common/xmltohb/attribute_types_hb.xml
+index 64a0c9bae..3cfdb9aa0 100644
+--- a/src/usr/targeting/common/xmltohb/attribute_types_hb.xml
++++ b/src/usr/targeting/common/xmltohb/attribute_types_hb.xml
+@@ -966,6 +966,7 @@
+     </simpleType>
+     <persistency>non-volatile</persistency>
+     <readable/>
++    <writeable/>
+ </attribute>
+ 
+ <attribute>
+-- 
+2.16.2.windows.1
+
diff --git a/openpower/patches/p8dtu-patches/hostboot-p8/0013-enable-TPM-required-sensor.patch b/openpower/patches/p8dtu-patches/hostboot-p8/0013-enable-TPM-required-sensor.patch
new file mode 100644
index 0000000..64709c0
--- /dev/null
+++ b/openpower/patches/p8dtu-patches/hostboot-p8/0013-enable-TPM-required-sensor.patch
@@ -0,0 +1,26 @@
+From db0d855457974d520d829259f56488e6c896be0e Mon Sep 17 00:00:00 2001
+From: Jim Yuan <jim.yuan@supermicro.com>
+Date: Thu, 27 Oct 2016 10:42:48 -0700
+Subject: [PATCH 13/14] enable TPM required sensor.
+
+Signed-off-by: Jim Yuan <jim.yuan@supermicro.com>
+---
+ src/usr/targeting/common/xmltohb/attribute_types_hb.xml | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/usr/targeting/common/xmltohb/attribute_types_hb.xml b/src/usr/targeting/common/xmltohb/attribute_types_hb.xml
+index 3cfdb9aa0..84536fbb4 100644
+--- a/src/usr/targeting/common/xmltohb/attribute_types_hb.xml
++++ b/src/usr/targeting/common/xmltohb/attribute_types_hb.xml
+@@ -1200,7 +1200,7 @@
+     </enumerator>
+     <enumerator>
+         <name>TPM_REQUIRED</name>
+-        <value>0xFFFF</value>
++        <value>0xCC03</value>
+     </enumerator>
+ </enumerationType>
+ 
+-- 
+2.16.2.windows.1
+
diff --git a/openpower/patches/p8dtu-patches/hostboot-p8/0014-add-gain-and-offset-for-1300w-48V-DC-power-supply.patch b/openpower/patches/p8dtu-patches/hostboot-p8/0014-add-gain-and-offset-for-1300w-48V-DC-power-supply.patch
new file mode 100644
index 0000000..fe5d816
--- /dev/null
+++ b/openpower/patches/p8dtu-patches/hostboot-p8/0014-add-gain-and-offset-for-1300w-48V-DC-power-supply.patch
@@ -0,0 +1,56 @@
+From a3283c6922dee8ebfb3ea9ac7d22047e6e7bca00 Mon Sep 17 00:00:00 2001
+From: Jim Yuan <jim.yuan@supermicro.com>
+Date: Tue, 9 May 2017 14:34:56 -0700
+Subject: [PATCH 14/14] add gain and offset for 1300w 48V DC power supply.
+
+Signed-off-by: Jim Yuan <jim.yuan@supermicro.com>
+---
+ src/usr/hwpf/hwp/start_payload/start_payload.C | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+diff --git a/src/usr/hwpf/hwp/start_payload/start_payload.C b/src/usr/hwpf/hwp/start_payload/start_payload.C
+index 80e62a0b6..309122785 100644
+--- a/src/usr/hwpf/hwp/start_payload/start_payload.C
++++ b/src/usr/hwpf/hwp/start_payload/start_payload.C
+@@ -287,6 +287,7 @@ enum
+ PWS_1600 = 0,
+ PWS_1000 = 1,
+ PWS_1200 = 2,
++PWS_1300 = 3,
+ PWS_UNKNOWN = 0xFE,
+ };
+ 
+@@ -382,6 +383,7 @@ uint8_t getPSUFRUFromIPMICommands(void)
+ 	uint8_t pws1600[] = {'P','W','S','-','1','K','6','2','A','-','1','R'};
+ 	uint8_t pws1000[] = {'P','W','S','-','1','K','0','2','A','-','1','R'};
+ 	uint8_t pws1200[] = {'P','W','S','-','1','K','2','2','A','-','1','R'};
++	uint8_t pws1300[] = {'P','W','S','-','1','K','3','0','D','-','1','R'};
+ 
+ 	//code to calculate product part number size and offset. should use structure. refer to FRU spec.		
+ 	product_info_offset = frudata[4] * 8;
+@@ -407,6 +409,10 @@ uint8_t getPSUFRUFromIPMICommands(void)
+ 		for (uint8_t i = 0; pws1200[i] == frudata[fru_offset + i] ; i ++)
+ 			if (i == 11)
+ 			powerSupplyFru = PWS_1200;
++
++		for (uint8_t i = 0; pws1300[i] == frudata[fru_offset + i] ; i ++)
++			if (i == 11)
++			powerSupplyFru = PWS_1300;
+ 	}
+ 	else	
+ 		powerSupplyFru = PWS_UNKNOWN;
+@@ -466,6 +472,11 @@ void setAPSSGainOffsetFromPWSInfo(void)
+ 	offset[TOTAL_SYSTEM_POWER] = 0;
+ 	break;
+ 
++	case PWS_1300: //PWS-1K30D-1R (1300W 48V AC):
++	gain[TOTAL_SYSTEM_POWER] = 51900; 
++	offset[TOTAL_SYSTEM_POWER] = 0;
++	break;
++
+ 	default:
+ 	//Do nothing, leave defaults
+ 	//Gen error for user attention?
+-- 
+2.16.2.windows.1
+