poky: subtree update:0ac99625bf..796be0593a
Alexander Kanavin (31):
netbase: upgrade 6.1 -> 6.2
meson: upgrade 0.55.1 -> 0.56.0
vulkan-samples: update to latest revision
libcap: update 2.44 -> 2.45
bind: upgrade 9.16.7 -> 9.16.9
quota: upgrade 4.05 -> 4.06
pango: upgrade 1.46.2 -> 1.48.0
elfutils: upgrade 0.181 -> 0.182
ifupdown: upgrade 0.8.35 -> 0.8.36
createrepo-c: upgrade 0.16.1 -> 0.16.2
acpica: upgrade 20200925 -> 20201113
grep: upgrade 3.5 -> 3.6
man-pages: upgrade 5.08 -> 5.09
stress-ng: upgrade 0.11.23 -> 0.11.24
libhandy: upgrade 1.0.1 -> 1.0.2
piglit: upgrade to latest revision
xkbcomp: upgrade 1.4.3 -> 1.4.4
lz4: upgrade 1.9.2 -> 1.9.3
bison: upgrade 3.7.3 -> 3.7.4
python3-setuptools-scm: fix upstream version check
cantarell-fonts: update 0.0.25 -> 0.201
meta/lib/oe/reproducible.py: gitsm:// works just as fine as git:// for timestamps
llvm: fix reproducibility
ruby: fix reproducibility
webkitgtk: fix reproducibility
ffmpeg: fix reproducibility
piglit: fix reproducibility
serf: do not install the static library
llvm: sort the lists in generated source reproducibibly
kea: fix reproducibility
poky.conf: do not write current date into distro version, use git hash instead
Andrej Valek (1):
kernel-dummy: fix executing unexpected tasks
Anuj Mittal (1):
releases.rst: add gatesgarth to current releases
Brett Warren (1):
libffi: add patch to revert clang VFP workaround
Chandana kalluri (1):
populate_sdk_ext: use SDK_CUSTOM_TEPLATECONF variable to enable custom templateconf.cfg
Changqing Li (1):
buildtools-tarball: add wic dependency into extended buildtools
Diego Sueiro (2):
modutils-initscripts: Fix modules.dep creation when USE_DEPMOD="0"
initscripts: Change execution order between checkroot and modutils
Dmitry Baryshkov (2):
linux-firmware: upgrade 20201022 -> 20201118
linux-firmware: package ath11k firmware
Fabio Berton (1):
mesa: Update 20.2.1 -> 20.2.4
Gratian Crisan (1):
kernel-module-split.bbclass: fix kernel modules getting marked as CONFFILES
Jack Mitchell (3):
Revert "connman: set service to conflict with systemd-networkd"
systemd-conf: add PACKAGECONFIG to enable/disable auto ethernet DHCP
systemd-conf: match ethernet interfaces by type rather than globbing
Joshua Watt (2):
bitbake: hashserv: client: Fix AF_UNIX path length limits
bitbake: hashserv: Fix broken AF_UNIX path length limit
Kai Kang (2):
systemd-systemctl-native: capable to call without argument
systemd.bbclass: update command to check systemctl available
Kevin Hao (1):
tune-octeontx2.inc: Add tune for Marvell OCTEON TX2 core
Li Wang (2):
qemu: CVE-2020-29129 CVE-2020-29130
qemu: CVE-2020-25624
Luca Boccassi (1):
dbus: move messagebus user to dbus-common package
Michael Halstead (1):
releases: conf: add link to 3.1.4, update to include 3.1.4
Nicolas Dechesne (19):
sphinx: add .vscode in .gitignore
{dev,kernel,sdk}-manual: replace hardcoded release version with &DISTRO;
sphinx: replace bitbake labels with references to corresponding title
brief-yoctoprojectqs: replace labels with references to section title
dev-manual: replace labels with references to section title
ref-manual: replace labels with references to section title
sdk-manual: replace labels with references to section title
overview-manual: remove unused labels
dev-manual: remove unused labels
sphinx: rename top level document in each manual
sphinx: use absolute paths for :doc: references
test-manual: remove 'test-manual' from filenames
toaster-manual: remove 'toaster-manual' from filenames
dev-manual: remove 'dev-manual' from filenames
kernel-dev: remove 'kernel-dev' from filenames
profile-manual: remove 'profile-manual' from filenames
overview-manual: remove 'overview-manual' from filenames
sdk-manual: remove 'sdk' from filenames
ref-manual: remove 'ref' from filenames
Paul Barker (5):
documentation: Simplify yocto_wiki links
documentation: Simplify yocto_git links
ref-manual: Simplify oe_git links
poky.conf: Add opensuseleap-15.2 and fedora-33 to tested distros
poky.conf: Drop fedora-30 from tested distros
Peter Kjellerstedt (2):
pseudo: Simplify pseudo_client_ignore_path_chroot()
bitbake.conf: Add all layers (from BBLAYERS) to PSEUDO_IGNORE_PATHS
Richard Purdie (8):
lz4: Use the new branch naming from upstream
Revert "bitbake.conf: Add all layers (from BBLAYERS) to PSEUDO_IGNORE_PATHS"
build-appliance-image: Update to master head revision
bitbake: Revert "fetch2: use relative symlinks for anything pulled from PREMIRRORS"
build-appliance-image: Update to master head revision
metadata_scm: Fix signature handling of METADATA_REVISION and METADATA_BRANCH
poky: Set SDK_VERSION explicitly
build-appliance-image: Update to master head revision
Ross Burton (9):
oeqa/devtool: use Yocto mirror for pv-1.5.3 tarball
image_types: remove obsolete tar comment
image_types: sort tarball file listings
package_manager/ipk: neaten OPKGLIBDIR logic
ldconfig-native: don't write auxiliary cache
package_manager/ipk: improve remove_packaging_data
oeqa/selftest/containerimage: update for improved cleanup
coreutils: add SUSE-specific issues to CVE whitelist
bitbake: msg: use safe YAML loader
Sinan Kaya (1):
poky-tiny: enable section removal
Tomasz Dziendzielski (1):
pseudo: Update to print PSEUDO_LOGFILE in abort message on path mismatches
sangeeta jain (1):
meta/lib/oeqa/manual/oe-core.json: Update test_bitbake_devshell
zangrc (3):
libinput: upgrade 1.16.3 -> 1.16.4
lighttpd: upgrade 1.4.55 -> 1.4.56
sysstat: upgrade 12.4.0 -> 12.4.1
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I65f2f1c9d44433f3e62609240012c42256679b51
diff --git a/poky/documentation/overview-manual/concepts.rst b/poky/documentation/overview-manual/concepts.rst
new file mode 100644
index 0000000..8fbbabb
--- /dev/null
+++ b/poky/documentation/overview-manual/concepts.rst
@@ -0,0 +1,2134 @@
+.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
+
+**********************
+Yocto Project Concepts
+**********************
+
+This chapter provides explanations for Yocto Project concepts that go
+beyond the surface of "how-to" information and reference (or look-up)
+material. Concepts such as components, the :term:`OpenEmbedded Build System`
+workflow,
+cross-development toolchains, shared state cache, and so forth are
+explained.
+
+Yocto Project Components
+========================
+
+The :term:`BitBake` task executor
+together with various types of configuration files form the
+:term:`OpenEmbedded-Core (OE-Core)`. This section
+overviews these components by describing their use and how they
+interact.
+
+BitBake handles the parsing and execution of the data files. The data
+itself is of various types:
+
+- *Recipes:* Provides details about particular pieces of software.
+
+- *Class Data:* Abstracts common build information (e.g. how to build a
+ Linux kernel).
+
+- *Configuration Data:* Defines machine-specific settings, policy
+ decisions, and so forth. Configuration data acts as the glue to bind
+ everything together.
+
+BitBake knows how to combine multiple data sources together and refers
+to each data source as a layer. For information on layers, see the
+":ref:`dev-manual/common-tasks:understanding and creating layers`"
+section of the Yocto Project Development Tasks Manual.
+
+Following are some brief details on these core components. For
+additional information on how these components interact during a build,
+see the
+":ref:`overview-manual/concepts:openembedded build system concepts`"
+section.
+
+BitBake
+-------
+
+BitBake is the tool at the heart of the :term:`OpenEmbedded Build System`
+and is responsible
+for parsing the :term:`Metadata`, generating
+a list of tasks from it, and then executing those tasks.
+
+This section briefly introduces BitBake. If you want more information on
+BitBake, see the :doc:`BitBake User Manual <bitbake:index>`.
+
+To see a list of the options BitBake supports, use either of the
+following commands:
+::
+
+ $ bitbake -h
+ $ bitbake --help
+
+The most common usage for BitBake is ``bitbake recipename``, where
+``recipename`` is the name of the recipe you want to build (referred
+to as the "target"). The target often equates to the first part of a
+recipe's filename (e.g. "foo" for a recipe named ``foo_1.3.0-r0.bb``).
+So, to process the ``matchbox-desktop_1.2.3.bb`` recipe file, you might
+type the following:
+::
+
+ $ bitbake matchbox-desktop
+
+Several different
+versions of ``matchbox-desktop`` might exist. BitBake chooses the one
+selected by the distribution configuration. You can get more details
+about how BitBake chooses between different target versions and
+providers in the
+":ref:`Preferences <bitbake:bitbake-user-manual/bitbake-user-manual-execution:preferences>`" section
+of the BitBake User Manual.
+
+BitBake also tries to execute any dependent tasks first. So for example,
+before building ``matchbox-desktop``, BitBake would build a cross
+compiler and ``glibc`` if they had not already been built.
+
+A useful BitBake option to consider is the ``-k`` or ``--continue``
+option. This option instructs BitBake to try and continue processing the
+job as long as possible even after encountering an error. When an error
+occurs, the target that failed and those that depend on it cannot be
+remade. However, when you use this option other dependencies can still
+be processed.
+
+Recipes
+-------
+
+Files that have the ``.bb`` suffix are "recipes" files. In general, a
+recipe contains information about a single piece of software. This
+information includes the location from which to download the unaltered
+source, any source patches to be applied to that source (if needed),
+which special configuration options to apply, how to compile the source
+files, and how to package the compiled output.
+
+The term "package" is sometimes used to refer to recipes. However, since
+the word "package" is used for the packaged output from the OpenEmbedded
+build system (i.e. ``.ipk`` or ``.deb`` files), this document avoids
+using the term "package" when referring to recipes.
+
+Classes
+-------
+
+Class files (``.bbclass``) contain information that is useful to share
+between recipes files. An example is the
+:ref:`autotools <ref-classes-autotools>` class,
+which contains common settings for any application that Autotools uses.
+The ":ref:`ref-manual/classes:Classes`" chapter in the
+Yocto Project Reference Manual provides details about classes and how to
+use them.
+
+Configurations
+--------------
+
+The configuration files (``.conf``) define various configuration
+variables that govern the OpenEmbedded build process. These files fall
+into several areas that define machine configuration options,
+distribution configuration options, compiler tuning options, general
+common configuration options, and user configuration options in
+``conf/local.conf``, which is found in the :term:`Build Directory`.
+
+
+Layers
+======
+
+Layers are repositories that contain related metadata (i.e. sets of
+instructions) that tell the OpenEmbedded build system how to build a
+target. Yocto Project's `layer model <#the-yocto-project-layer-model>`__
+facilitates collaboration, sharing, customization, and reuse within the
+Yocto Project development environment. Layers logically separate
+information for your project. For example, you can use a layer to hold
+all the configurations for a particular piece of hardware. Isolating
+hardware-specific configurations allows you to share other metadata by
+using a different layer where that metadata might be common across
+several pieces of hardware.
+
+Many layers exist that work in the Yocto Project development
+environment. The `Yocto Project Curated Layer
+Index <https://www.yoctoproject.org/software-overview/layers/>`__
+and `OpenEmbedded Layer
+Index <http://layers.openembedded.org/layerindex/branch/master/layers/>`__
+both contain layers from which you can use or leverage.
+
+By convention, layers in the Yocto Project follow a specific form.
+Conforming to a known structure allows BitBake to make assumptions
+during builds on where to find types of metadata. You can find
+procedures and learn about tools (i.e. ``bitbake-layers``) for creating
+layers suitable for the Yocto Project in the
+":ref:`dev-manual/common-tasks:understanding and creating layers`"
+section of the Yocto Project Development Tasks Manual.
+
+OpenEmbedded Build System Concepts
+==================================
+
+This section takes a more detailed look inside the build process used by
+the :term:`OpenEmbedded Build System`,
+which is the build
+system specific to the Yocto Project. At the heart of the build system
+is BitBake, the task executor.
+
+The following diagram represents the high-level workflow of a build. The
+remainder of this section expands on the fundamental input, output,
+process, and metadata logical blocks that make up the workflow.
+
+.. image:: figures/YP-flow-diagram.png
+ :align: center
+
+In general, the build's workflow consists of several functional areas:
+
+- *User Configuration:* metadata you can use to control the build
+ process.
+
+- *Metadata Layers:* Various layers that provide software, machine, and
+ distro metadata.
+
+- *Source Files:* Upstream releases, local projects, and SCMs.
+
+- *Build System:* Processes under the control of
+ :term:`BitBake`. This block expands
+ on how BitBake fetches source, applies patches, completes
+ compilation, analyzes output for package generation, creates and
+ tests packages, generates images, and generates cross-development
+ tools.
+
+- *Package Feeds:* Directories containing output packages (RPM, DEB or
+ IPK), which are subsequently used in the construction of an image or
+ Software Development Kit (SDK), produced by the build system. These
+ feeds can also be copied and shared using a web server or other means
+ to facilitate extending or updating existing images on devices at
+ runtime if runtime package management is enabled.
+
+- *Images:* Images produced by the workflow.
+
+- *Application Development SDK:* Cross-development tools that are
+ produced along with an image or separately with BitBake.
+
+User Configuration
+------------------
+
+User configuration helps define the build. Through user configuration,
+you can tell BitBake the target architecture for which you are building
+the image, where to store downloaded source, and other build properties.
+
+The following figure shows an expanded representation of the "User
+Configuration" box of the `general workflow
+figure <#general-workflow-figure>`__:
+
+.. image:: figures/user-configuration.png
+ :align: center
+
+BitBake needs some basic configuration files in order to complete a
+build. These files are ``*.conf`` files. The minimally necessary ones
+reside as example files in the ``build/conf`` directory of the
+:term:`Source Directory`. For simplicity,
+this section refers to the Source Directory as the "Poky Directory."
+
+When you clone the :term:`Poky` Git repository
+or you download and unpack a Yocto Project release, you can set up the
+Source Directory to be named anything you want. For this discussion, the
+cloned repository uses the default name ``poky``.
+
+.. note::
+
+ The Poky repository is primarily an aggregation of existing
+ repositories. It is not a canonical upstream source.
+
+The ``meta-poky`` layer inside Poky contains a ``conf`` directory that
+has example configuration files. These example files are used as a basis
+for creating actual configuration files when you source
+:ref:`structure-core-script`, which is the
+build environment script.
+
+Sourcing the build environment script creates a
+:term:`Build Directory` if one does not
+already exist. BitBake uses the Build Directory for all its work during
+builds. The Build Directory has a ``conf`` directory that contains
+default versions of your ``local.conf`` and ``bblayers.conf``
+configuration files. These default configuration files are created only
+if versions do not already exist in the Build Directory at the time you
+source the build environment setup script.
+
+Because the Poky repository is fundamentally an aggregation of existing
+repositories, some users might be familiar with running the
+:ref:`structure-core-script` script in the context of separate
+:term:`OpenEmbedded-Core (OE-Core)` and BitBake
+repositories rather than a single Poky repository. This discussion
+assumes the script is executed from within a cloned or unpacked version
+of Poky.
+
+Depending on where the script is sourced, different sub-scripts are
+called to set up the Build Directory (Yocto or OpenEmbedded).
+Specifically, the script ``scripts/oe-setup-builddir`` inside the poky
+directory sets up the Build Directory and seeds the directory (if
+necessary) with configuration files appropriate for the Yocto Project
+development environment.
+
+.. note::
+
+ The
+ scripts/oe-setup-builddir
+ script uses the
+ ``$TEMPLATECONF``
+ variable to determine which sample configuration files to locate.
+
+The ``local.conf`` file provides many basic variables that define a
+build environment. Here is a list of a few. To see the default
+configurations in a ``local.conf`` file created by the build environment
+script, see the
+:yocto_git:`local.conf.sample </poky/tree/meta-poky/conf/local.conf.sample>`
+in the ``meta-poky`` layer:
+
+- *Target Machine Selection:* Controlled by the
+ :term:`MACHINE` variable.
+
+- *Download Directory:* Controlled by the
+ :term:`DL_DIR` variable.
+
+- *Shared State Directory:* Controlled by the
+ :term:`SSTATE_DIR` variable.
+
+- *Build Output:* Controlled by the
+ :term:`TMPDIR` variable.
+
+- *Distribution Policy:* Controlled by the
+ :term:`DISTRO` variable.
+
+- *Packaging Format:* Controlled by the
+ :term:`PACKAGE_CLASSES`
+ variable.
+
+- *SDK Target Architecture:* Controlled by the
+ :term:`SDKMACHINE` variable.
+
+- *Extra Image Packages:* Controlled by the
+ :term:`EXTRA_IMAGE_FEATURES`
+ variable.
+
+.. note::
+
+ Configurations set in the
+ conf/local.conf
+ file can also be set in the
+ conf/site.conf
+ and
+ conf/auto.conf
+ configuration files.
+
+The ``bblayers.conf`` file tells BitBake what layers you want considered
+during the build. By default, the layers listed in this file include
+layers minimally needed by the build system. However, you must manually
+add any custom layers you have created. You can find more information on
+working with the ``bblayers.conf`` file in the
+":ref:`dev-manual/common-tasks:enabling your layer`"
+section in the Yocto Project Development Tasks Manual.
+
+The files ``site.conf`` and ``auto.conf`` are not created by the
+environment initialization script. If you want the ``site.conf`` file,
+you need to create that yourself. The ``auto.conf`` file is typically
+created by an autobuilder:
+
+- *site.conf:* You can use the ``conf/site.conf`` configuration
+ file to configure multiple build directories. For example, suppose
+ you had several build environments and they shared some common
+ features. You can set these default build properties here. A good
+ example is perhaps the packaging format to use through the
+ :term:`PACKAGE_CLASSES`
+ variable.
+
+ One useful scenario for using the ``conf/site.conf`` file is to
+ extend your :term:`BBPATH` variable
+ to include the path to a ``conf/site.conf``. Then, when BitBake looks
+ for Metadata using ``BBPATH``, it finds the ``conf/site.conf`` file
+ and applies your common configurations found in the file. To override
+ configurations in a particular build directory, alter the similar
+ configurations within that build directory's ``conf/local.conf``
+ file.
+
+- *auto.conf:* The file is usually created and written to by an
+ autobuilder. The settings put into the file are typically the same as
+ you would find in the ``conf/local.conf`` or the ``conf/site.conf``
+ files.
+
+You can edit all configuration files to further define any particular
+build environment. This process is represented by the "User
+Configuration Edits" box in the figure.
+
+When you launch your build with the ``bitbake target`` command, BitBake
+sorts out the configurations to ultimately define your build
+environment. It is important to understand that the
+:term:`OpenEmbedded Build System` reads the
+configuration files in a specific order: ``site.conf``, ``auto.conf``,
+and ``local.conf``. And, the build system applies the normal assignment
+statement rules as described in the
+":doc:`bitbake:bitbake-user-manual/bitbake-user-manual-metadata`" chapter
+of the BitBake User Manual. Because the files are parsed in a specific
+order, variable assignments for the same variable could be affected. For
+example, if the ``auto.conf`` file and the ``local.conf`` set variable1
+to different values, because the build system parses ``local.conf``
+after ``auto.conf``, variable1 is assigned the value from the
+``local.conf`` file.
+
+Metadata, Machine Configuration, and Policy Configuration
+---------------------------------------------------------
+
+The previous section described the user configurations that define
+BitBake's global behavior. This section takes a closer look at the
+layers the build system uses to further control the build. These layers
+provide Metadata for the software, machine, and policies.
+
+In general, three types of layer input exists. You can see them below
+the "User Configuration" box in the `general workflow
+figure <#general-workflow-figure>`__:
+
+- *Metadata (.bb + Patches):* Software layers containing
+ user-supplied recipe files, patches, and append files. A good example
+ of a software layer might be the
+ `meta-qt5 layer <https://github.com/meta-qt5/meta-qt5>`__ from
+ the `OpenEmbedded Layer
+ Index <http://layers.openembedded.org/layerindex/branch/master/layers/>`__.
+ This layer is for version 5.0 of the popular
+ `Qt <https://wiki.qt.io/About_Qt>`__ cross-platform application
+ development framework for desktop, embedded and mobile.
+
+- *Machine BSP Configuration:* Board Support Package (BSP) layers (i.e.
+ "BSP Layer" in the following figure) providing machine-specific
+ configurations. This type of information is specific to a particular
+ target architecture. A good example of a BSP layer from the `Poky
+ Reference Distribution <#gs-reference-distribution-poky>`__ is the
+ :yocto_git:`meta-yocto-bsp </poky/tree/meta-yocto-bsp>`
+ layer.
+
+- *Policy Configuration:* Distribution Layers (i.e. "Distro Layer" in
+ the following figure) providing top-level or general policies for the
+ images or SDKs being built for a particular distribution. For
+ example, in the Poky Reference Distribution the distro layer is the
+ :yocto_git:`meta-poky </poky/tree/meta-poky>`
+ layer. Within the distro layer is a ``conf/distro`` directory that
+ contains distro configuration files (e.g.
+ :yocto_git:`poky.conf </poky/tree/meta-poky/conf/distro/poky.conf>`
+ that contain many policy configurations for the Poky distribution.
+
+The following figure shows an expanded representation of these three
+layers from the `general workflow figure <#general-workflow-figure>`__:
+
+.. image:: figures/layer-input.png
+ :align: center
+
+In general, all layers have a similar structure. They all contain a
+licensing file (e.g. ``COPYING.MIT``) if the layer is to be distributed,
+a ``README`` file as good practice and especially if the layer is to be
+distributed, a configuration directory, and recipe directories. You can
+learn about the general structure for layers used with the Yocto Project
+in the
+":ref:`dev-manual/common-tasks:creating your own layer`"
+section in the
+Yocto Project Development Tasks Manual. For a general discussion on
+layers and the many layers from which you can draw, see the
+"`Layers <#overview-layers>`__" and "`The Yocto Project Layer
+Model <#the-yocto-project-layer-model>`__" sections both earlier in this
+manual.
+
+If you explored the previous links, you discovered some areas where many
+layers that work with the Yocto Project exist. The :yocto_git:`Source
+Repositories <>` also shows layers categorized under "Yocto Metadata Layers."
+
+.. note::
+
+ Layers exist in the Yocto Project Source Repositories that cannot be
+ found in the OpenEmbedded Layer Index. These layers are either
+ deprecated or experimental in nature.
+
+BitBake uses the ``conf/bblayers.conf`` file, which is part of the user
+configuration, to find what layers it should be using as part of the
+build.
+
+Distro Layer
+~~~~~~~~~~~~
+
+The distribution layer provides policy configurations for your
+distribution. Best practices dictate that you isolate these types of
+configurations into their own layer. Settings you provide in
+``conf/distro/distro.conf`` override similar settings that BitBake finds
+in your ``conf/local.conf`` file in the Build Directory.
+
+The following list provides some explanation and references for what you
+typically find in the distribution layer:
+
+- *classes:* Class files (``.bbclass``) hold common functionality that
+ can be shared among recipes in the distribution. When your recipes
+ inherit a class, they take on the settings and functions for that
+ class. You can read more about class files in the
+ ":ref:`ref-manual/classes:Classes`" chapter of the Yocto
+ Reference Manual.
+
+- *conf:* This area holds configuration files for the layer
+ (``conf/layer.conf``), the distribution
+ (``conf/distro/distro.conf``), and any distribution-wide include
+ files.
+
+- *recipes-*:* Recipes and append files that affect common
+ functionality across the distribution. This area could include
+ recipes and append files to add distribution-specific configuration,
+ initialization scripts, custom image recipes, and so forth. Examples
+ of ``recipes-*`` directories are ``recipes-core`` and
+ ``recipes-extra``. Hierarchy and contents within a ``recipes-*``
+ directory can vary. Generally, these directories contain recipe files
+ (``*.bb``), recipe append files (``*.bbappend``), directories that
+ are distro-specific for configuration files, and so forth.
+
+BSP Layer
+~~~~~~~~~
+
+The BSP Layer provides machine configurations that target specific
+hardware. Everything in this layer is specific to the machine for which
+you are building the image or the SDK. A common structure or form is
+defined for BSP layers. You can learn more about this structure in the
+:doc:`/bsp-guide/index`.
+
+.. note::
+
+ In order for a BSP layer to be considered compliant with the Yocto
+ Project, it must meet some structural requirements.
+
+The BSP Layer's configuration directory contains configuration files for
+the machine (``conf/machine/machine.conf``) and, of course, the layer
+(``conf/layer.conf``).
+
+The remainder of the layer is dedicated to specific recipes by function:
+``recipes-bsp``, ``recipes-core``, ``recipes-graphics``,
+``recipes-kernel``, and so forth. Metadata can exist for multiple
+formfactors, graphics support systems, and so forth.
+
+.. note::
+
+ While the figure shows several
+ recipes-\*
+ directories, not all these directories appear in all BSP layers.
+
+Software Layer
+~~~~~~~~~~~~~~
+
+The software layer provides the Metadata for additional software
+packages used during the build. This layer does not include Metadata
+that is specific to the distribution or the machine, which are found in
+their respective layers.
+
+This layer contains any recipes, append files, and patches, that your
+project needs.
+
+Sources
+-------
+
+In order for the OpenEmbedded build system to create an image or any
+target, it must be able to access source files. The `general workflow
+figure <#general-workflow-figure>`__ represents source files using the
+"Upstream Project Releases", "Local Projects", and "SCMs (optional)"
+boxes. The figure represents mirrors, which also play a role in locating
+source files, with the "Source Materials" box.
+
+The method by which source files are ultimately organized is a function
+of the project. For example, for released software, projects tend to use
+tarballs or other archived files that can capture the state of a release
+guaranteeing that it is statically represented. On the other hand, for a
+project that is more dynamic or experimental in nature, a project might
+keep source files in a repository controlled by a Source Control Manager
+(SCM) such as Git. Pulling source from a repository allows you to
+control the point in the repository (the revision) from which you want
+to build software. Finally, a combination of the two might exist, which
+would give the consumer a choice when deciding where to get source
+files.
+
+BitBake uses the :term:`SRC_URI`
+variable to point to source files regardless of their location. Each
+recipe must have a ``SRC_URI`` variable that points to the source.
+
+Another area that plays a significant role in where source files come
+from is pointed to by the
+:term:`DL_DIR` variable. This area is
+a cache that can hold previously downloaded source. You can also
+instruct the OpenEmbedded build system to create tarballs from Git
+repositories, which is not the default behavior, and store them in the
+``DL_DIR`` by using the
+:term:`BB_GENERATE_MIRROR_TARBALLS`
+variable.
+
+Judicious use of a ``DL_DIR`` directory can save the build system a trip
+across the Internet when looking for files. A good method for using a
+download directory is to have ``DL_DIR`` point to an area outside of
+your Build Directory. Doing so allows you to safely delete the Build
+Directory if needed without fear of removing any downloaded source file.
+
+The remainder of this section provides a deeper look into the source
+files and the mirrors. Here is a more detailed look at the source file
+area of the `general workflow figure <#general-workflow-figure>`__:
+
+.. image:: figures/source-input.png
+ :align: center
+
+Upstream Project Releases
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Upstream project releases exist anywhere in the form of an archived file
+(e.g. tarball or zip file). These files correspond to individual
+recipes. For example, the figure uses specific releases each for
+BusyBox, Qt, and Dbus. An archive file can be for any released product
+that can be built using a recipe.
+
+Local Projects
+~~~~~~~~~~~~~~
+
+Local projects are custom bits of software the user provides. These bits
+reside somewhere local to a project - perhaps a directory into which the
+user checks in items (e.g. a local directory containing a development
+source tree used by the group).
+
+The canonical method through which to include a local project is to use
+the :ref:`externalsrc <ref-classes-externalsrc>`
+class to include that local project. You use either the ``local.conf``
+or a recipe's append file to override or set the recipe to point to the
+local directory on your disk to pull in the whole source tree.
+
+Source Control Managers (Optional)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Another place from which the build system can get source files is with
+:ref:`fetchers <bitbake:bitbake-user-manual/bitbake-user-manual-fetching:fetchers>` employing various Source
+Control Managers (SCMs) such as Git or Subversion. In such cases, a
+repository is cloned or checked out. The
+:ref:`ref-tasks-fetch` task inside
+BitBake uses the :term:`SRC_URI`
+variable and the argument's prefix to determine the correct fetcher
+module.
+
+.. note::
+
+ For information on how to have the OpenEmbedded build system generate
+ tarballs for Git repositories and place them in the
+ DL_DIR
+ directory, see the :term:`BB_GENERATE_MIRROR_TARBALLS`
+ variable in the Yocto Project Reference Manual.
+
+When fetching a repository, BitBake uses the
+:term:`SRCREV` variable to determine
+the specific revision from which to build.
+
+Source Mirror(s)
+~~~~~~~~~~~~~~~~
+
+Two kinds of mirrors exist: pre-mirrors and regular mirrors. The
+:term:`PREMIRRORS` and
+:term:`MIRRORS` variables point to
+these, respectively. BitBake checks pre-mirrors before looking upstream
+for any source files. Pre-mirrors are appropriate when you have a shared
+directory that is not a directory defined by the
+:term:`DL_DIR` variable. A Pre-mirror
+typically points to a shared directory that is local to your
+organization.
+
+Regular mirrors can be any site across the Internet that is used as an
+alternative location for source code should the primary site not be
+functioning for some reason or another.
+
+Package Feeds
+-------------
+
+When the OpenEmbedded build system generates an image or an SDK, it gets
+the packages from a package feed area located in the
+:term:`Build Directory`. The `general
+workflow figure <#general-workflow-figure>`__ shows this package feeds
+area in the upper-right corner.
+
+This section looks a little closer into the package feeds area used by
+the build system. Here is a more detailed look at the area:
+
+.. image:: figures/package-feeds.png
+ :align: center
+
+Package feeds are an intermediary step in the build process. The
+OpenEmbedded build system provides classes to generate different package
+types, and you specify which classes to enable through the
+:term:`PACKAGE_CLASSES`
+variable. Before placing the packages into package feeds, the build
+process validates them with generated output quality assurance checks
+through the :ref:`insane <ref-classes-insane>`
+class.
+
+The package feed area resides in the Build Directory. The directory the
+build system uses to temporarily store packages is determined by a
+combination of variables and the particular package manager in use. See
+the "Package Feeds" box in the illustration and note the information to
+the right of that area. In particular, the following defines where
+package files are kept:
+
+- :term:`DEPLOY_DIR`: Defined as
+ ``tmp/deploy`` in the Build Directory.
+
+- ``DEPLOY_DIR_*``: Depending on the package manager used, the package
+ type sub-folder. Given RPM, IPK, or DEB packaging and tarball
+ creation, the
+ :term:`DEPLOY_DIR_RPM`,
+ :term:`DEPLOY_DIR_IPK`,
+ :term:`DEPLOY_DIR_DEB`, or
+ :term:`DEPLOY_DIR_TAR`,
+ variables are used, respectively.
+
+- :term:`PACKAGE_ARCH`: Defines
+ architecture-specific sub-folders. For example, packages could exist
+ for the i586 or qemux86 architectures.
+
+BitBake uses the
+:ref:`do_package_write_* <ref-tasks-package_write_deb>`
+tasks to generate packages and place them into the package holding area
+(e.g. ``do_package_write_ipk`` for IPK packages). See the
+":ref:`ref-tasks-package_write_deb`",
+":ref:`ref-tasks-package_write_ipk`",
+":ref:`ref-tasks-package_write_rpm`",
+and
+":ref:`ref-tasks-package_write_tar`"
+sections in the Yocto Project Reference Manual for additional
+information. As an example, consider a scenario where an IPK packaging
+manager is being used and package architecture support for both i586 and
+qemux86 exist. Packages for the i586 architecture are placed in
+``build/tmp/deploy/ipk/i586``, while packages for the qemux86
+architecture are placed in ``build/tmp/deploy/ipk/qemux86``.
+
+BitBake Tool
+------------
+
+The OpenEmbedded build system uses
+:term:`BitBake` to produce images and
+Software Development Kits (SDKs). You can see from the `general workflow
+figure <#general-workflow-figure>`__, the BitBake area consists of
+several functional areas. This section takes a closer look at each of
+those areas.
+
+.. note::
+
+ Separate documentation exists for the BitBake tool. See the
+ BitBake User Manual
+ for reference material on BitBake.
+
+Source Fetching
+~~~~~~~~~~~~~~~
+
+The first stages of building a recipe are to fetch and unpack the source
+code:
+
+.. image:: figures/source-fetching.png
+ :align: center
+
+The :ref:`ref-tasks-fetch` and
+:ref:`ref-tasks-unpack` tasks fetch
+the source files and unpack them into the
+:term:`Build Directory`.
+
+.. note::
+
+ For every local file (e.g.
+ file://
+ ) that is part of a recipe's
+ SRC_URI
+ statement, the OpenEmbedded build system takes a checksum of the file
+ for the recipe and inserts the checksum into the signature for the
+ do_fetch
+ task. If any local file has been modified, the
+ do_fetch
+ task and all tasks that depend on it are re-executed.
+
+By default, everything is accomplished in the Build Directory, which has
+a defined structure. For additional general information on the Build
+Directory, see the ":ref:`structure-core-build`" section in
+the Yocto Project Reference Manual.
+
+Each recipe has an area in the Build Directory where the unpacked source
+code resides. The :term:`S` variable points
+to this area for a recipe's unpacked source code. The name of that
+directory for any given recipe is defined from several different
+variables. The preceding figure and the following list describe the
+Build Directory's hierarchy:
+
+- :term:`TMPDIR`: The base directory
+ where the OpenEmbedded build system performs all its work during the
+ build. The default base directory is the ``tmp`` directory.
+
+- :term:`PACKAGE_ARCH`: The
+ architecture of the built package or packages. Depending on the
+ eventual destination of the package or packages (i.e. machine
+ architecture, :term:`Build Host`, SDK, or
+ specific machine), ``PACKAGE_ARCH`` varies. See the variable's
+ description for details.
+
+- :term:`TARGET_OS`: The operating
+ system of the target device. A typical value would be "linux" (e.g.
+ "qemux86-poky-linux").
+
+- :term:`PN`: The name of the recipe used
+ to build the package. This variable can have multiple meanings.
+ However, when used in the context of input files, ``PN`` represents
+ the name of the recipe.
+
+- :term:`WORKDIR`: The location
+ where the OpenEmbedded build system builds a recipe (i.e. does the
+ work to create the package).
+
+ - :term:`PV`: The version of the
+ recipe used to build the package.
+
+ - :term:`PR`: The revision of the
+ recipe used to build the package.
+
+- :term:`S`: Contains the unpacked source
+ files for a given recipe.
+
+ - :term:`BPN`: The name of the recipe
+ used to build the package. The ``BPN`` variable is a version of
+ the ``PN`` variable but with common prefixes and suffixes removed.
+
+ - :term:`PV`: The version of the
+ recipe used to build the package.
+
+.. note::
+
+ In the previous figure, notice that two sample hierarchies exist: one
+ based on package architecture (i.e.
+ PACKAGE_ARCH
+ ) and one based on a machine (i.e.
+ MACHINE
+ ). The underlying structures are identical. The differentiator being
+ what the OpenEmbedded build system is using as a build target (e.g.
+ general architecture, a build host, an SDK, or a specific machine).
+
+Patching
+~~~~~~~~
+
+Once source code is fetched and unpacked, BitBake locates patch files
+and applies them to the source files:
+
+.. image:: figures/patching.png
+ :align: center
+
+The :ref:`ref-tasks-patch` task uses a
+recipe's :term:`SRC_URI` statements
+and the :term:`FILESPATH` variable
+to locate applicable patch files.
+
+Default processing for patch files assumes the files have either
+``*.patch`` or ``*.diff`` file types. You can use ``SRC_URI`` parameters
+to change the way the build system recognizes patch files. See the
+:ref:`ref-tasks-patch` task for more
+information.
+
+BitBake finds and applies multiple patches for a single recipe in the
+order in which it locates the patches. The ``FILESPATH`` variable
+defines the default set of directories that the build system uses to
+search for patch files. Once found, patches are applied to the recipe's
+source files, which are located in the
+:term:`S` directory.
+
+For more information on how the source directories are created, see the
+"`Source Fetching <#source-fetching-dev-environment>`__" section. For
+more information on how to create patches and how the build system
+processes patches, see the
+":ref:`dev-manual/common-tasks:patching code`"
+section in the
+Yocto Project Development Tasks Manual. You can also see the
+":ref:`sdk-manual/extensible:use \`\`devtool modify\`\` to modify the source of an existing component`"
+section in the Yocto Project Application Development and the Extensible
+Software Development Kit (SDK) manual and the
+":ref:`kernel-dev/common:using traditional kernel development to patch the kernel`"
+section in the Yocto Project Linux Kernel Development Manual.
+
+Configuration, Compilation, and Staging
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+After source code is patched, BitBake executes tasks that configure and
+compile the source code. Once compilation occurs, the files are copied
+to a holding area (staged) in preparation for packaging:
+
+.. image:: figures/configuration-compile-autoreconf.png
+ :align: center
+
+This step in the build process consists of the following tasks:
+
+- :ref:`ref-tasks-prepare_recipe_sysroot`:
+ This task sets up the two sysroots in
+ ``${``\ :term:`WORKDIR`\ ``}``
+ (i.e. ``recipe-sysroot`` and ``recipe-sysroot-native``) so that
+ during the packaging phase the sysroots can contain the contents of
+ the
+ :ref:`ref-tasks-populate_sysroot`
+ tasks of the recipes on which the recipe containing the tasks
+ depends. A sysroot exists for both the target and for the native
+ binaries, which run on the host system.
+
+- *do_configure*: This task configures the source by enabling and
+ disabling any build-time and configuration options for the software
+ being built. Configurations can come from the recipe itself as well
+ as from an inherited class. Additionally, the software itself might
+ configure itself depending on the target for which it is being built.
+
+ The configurations handled by the
+ :ref:`ref-tasks-configure` task
+ are specific to configurations for the source code being built by the
+ recipe.
+
+ If you are using the
+ :ref:`autotools <ref-classes-autotools>` class,
+ you can add additional configuration options by using the
+ :term:`EXTRA_OECONF` or
+ :term:`PACKAGECONFIG_CONFARGS`
+ variables. For information on how this variable works within that
+ class, see the
+ :ref:`autotools <ref-classes-autotools>` class
+ :yocto_git:`here </poky/tree/meta/classes/autotools.bbclass>`.
+
+- *do_compile*: Once a configuration task has been satisfied,
+ BitBake compiles the source using the
+ :ref:`ref-tasks-compile` task.
+ Compilation occurs in the directory pointed to by the
+ :term:`B` variable. Realize that the
+ ``B`` directory is, by default, the same as the
+ :term:`S` directory.
+
+- *do_install*: After compilation completes, BitBake executes the
+ :ref:`ref-tasks-install` task.
+ This task copies files from the ``B`` directory and places them in a
+ holding area pointed to by the :term:`D`
+ variable. Packaging occurs later using files from this holding
+ directory.
+
+Package Splitting
+~~~~~~~~~~~~~~~~~
+
+After source code is configured, compiled, and staged, the build system
+analyzes the results and splits the output into packages:
+
+.. image:: figures/analysis-for-package-splitting.png
+ :align: center
+
+The :ref:`ref-tasks-package` and
+:ref:`ref-tasks-packagedata`
+tasks combine to analyze the files found in the
+:term:`D` directory and split them into
+subsets based on available packages and files. Analysis involves the
+following as well as other items: splitting out debugging symbols,
+looking at shared library dependencies between packages, and looking at
+package relationships.
+
+The ``do_packagedata`` task creates package metadata based on the
+analysis such that the build system can generate the final packages. The
+:ref:`ref-tasks-populate_sysroot`
+task stages (copies) a subset of the files installed by the
+:ref:`ref-tasks-install` task into
+the appropriate sysroot. Working, staged, and intermediate results of
+the analysis and package splitting process use several areas:
+
+- :term:`PKGD`: The destination
+ directory (i.e. ``package``) for packages before they are split into
+ individual packages.
+
+- :term:`PKGDESTWORK`: A
+ temporary work area (i.e. ``pkgdata``) used by the ``do_package``
+ task to save package metadata.
+
+- :term:`PKGDEST`: The parent
+ directory (i.e. ``packages-split``) for packages after they have been
+ split.
+
+- :term:`PKGDATA_DIR`: A shared,
+ global-state directory that holds packaging metadata generated during
+ the packaging process. The packaging process copies metadata from
+ ``PKGDESTWORK`` to the ``PKGDATA_DIR`` area where it becomes globally
+ available.
+
+- :term:`STAGING_DIR_HOST`:
+ The path for the sysroot for the system on which a component is built
+ to run (i.e. ``recipe-sysroot``).
+
+- :term:`STAGING_DIR_NATIVE`:
+ The path for the sysroot used when building components for the build
+ host (i.e. ``recipe-sysroot-native``).
+
+- :term:`STAGING_DIR_TARGET`:
+ The path for the sysroot used when a component that is built to
+ execute on a system and it generates code for yet another machine
+ (e.g. cross-canadian recipes).
+
+The :term:`FILES` variable defines the
+files that go into each package in
+:term:`PACKAGES`. If you want
+details on how this is accomplished, you can look at
+:yocto_git:`package.bbclass </poky/tree/meta/classes/package.bbclass>`.
+
+Depending on the type of packages being created (RPM, DEB, or IPK), the
+:ref:`do_package_write_* <ref-tasks-package_write_deb>`
+task creates the actual packages and places them in the Package Feed
+area, which is ``${TMPDIR}/deploy``. You can see the "`Package
+Feeds <#package-feeds-dev-environment>`__" section for more detail on
+that part of the build process.
+
+.. note::
+
+ Support for creating feeds directly from the
+ deploy/\*
+ directories does not exist. Creating such feeds usually requires some
+ kind of feed maintenance mechanism that would upload the new packages
+ into an official package feed (e.g. the Ångström distribution). This
+ functionality is highly distribution-specific and thus is not
+ provided out of the box.
+
+Image Generation
+~~~~~~~~~~~~~~~~
+
+Once packages are split and stored in the Package Feeds area, the build
+system uses BitBake to generate the root filesystem image:
+
+.. image:: figures/image-generation.png
+ :align: center
+
+The image generation process consists of several stages and depends on
+several tasks and variables. The
+:ref:`ref-tasks-rootfs` task creates
+the root filesystem (file and directory structure) for an image. This
+task uses several key variables to help create the list of packages to
+actually install:
+
+- :term:`IMAGE_INSTALL`: Lists
+ out the base set of packages from which to install from the Package
+ Feeds area.
+
+- :term:`PACKAGE_EXCLUDE`:
+ Specifies packages that should not be installed into the image.
+
+- :term:`IMAGE_FEATURES`:
+ Specifies features to include in the image. Most of these features
+ map to additional packages for installation.
+
+- :term:`PACKAGE_CLASSES`:
+ Specifies the package backend (e.g. RPM, DEB, or IPK) to use and
+ consequently helps determine where to locate packages within the
+ Package Feeds area.
+
+- :term:`IMAGE_LINGUAS`:
+ Determines the language(s) for which additional language support
+ packages are installed.
+
+- :term:`PACKAGE_INSTALL`:
+ The final list of packages passed to the package manager for
+ installation into the image.
+
+With :term:`IMAGE_ROOTFS`
+pointing to the location of the filesystem under construction and the
+``PACKAGE_INSTALL`` variable providing the final list of packages to
+install, the root file system is created.
+
+Package installation is under control of the package manager (e.g.
+dnf/rpm, opkg, or apt/dpkg) regardless of whether or not package
+management is enabled for the target. At the end of the process, if
+package management is not enabled for the target, the package manager's
+data files are deleted from the root filesystem. As part of the final
+stage of package installation, post installation scripts that are part
+of the packages are run. Any scripts that fail to run on the build host
+are run on the target when the target system is first booted. If you are
+using a
+:ref:`read-only root filesystem <dev-manual/common-tasks:creating a read-only root filesystem>`,
+all the post installation scripts must succeed on the build host during
+the package installation phase since the root filesystem on the target
+is read-only.
+
+The final stages of the ``do_rootfs`` task handle post processing. Post
+processing includes creation of a manifest file and optimizations.
+
+The manifest file (``.manifest``) resides in the same directory as the
+root filesystem image. This file lists out, line-by-line, the installed
+packages. The manifest file is useful for the
+:ref:`testimage <ref-classes-testimage*>` class,
+for example, to determine whether or not to run specific tests. See the
+:term:`IMAGE_MANIFEST`
+variable for additional information.
+
+Optimizing processes that are run across the image include ``mklibs``,
+``prelink``, and any other post-processing commands as defined by the
+:term:`ROOTFS_POSTPROCESS_COMMAND`
+variable. The ``mklibs`` process optimizes the size of the libraries,
+while the ``prelink`` process optimizes the dynamic linking of shared
+libraries to reduce start up time of executables.
+
+After the root filesystem is built, processing begins on the image
+through the :ref:`ref-tasks-image`
+task. The build system runs any pre-processing commands as defined by
+the
+:term:`IMAGE_PREPROCESS_COMMAND`
+variable. This variable specifies a list of functions to call before the
+build system creates the final image output files.
+
+The build system dynamically creates ``do_image_*`` tasks as needed,
+based on the image types specified in the
+:term:`IMAGE_FSTYPES` variable.
+The process turns everything into an image file or a set of image files
+and can compress the root filesystem image to reduce the overall size of
+the image. The formats used for the root filesystem depend on the
+``IMAGE_FSTYPES`` variable. Compression depends on whether the formats
+support compression.
+
+As an example, a dynamically created task when creating a particular
+image type would take the following form:
+::
+
+ do_image_type
+
+So, if the type
+as specified by the ``IMAGE_FSTYPES`` were ``ext4``, the dynamically
+generated task would be as follows:
+::
+
+ do_image_ext4
+
+The final task involved in image creation is the
+:ref:`do_image_complete <ref-tasks-image-complete>`
+task. This task completes the image by applying any image post
+processing as defined through the
+:term:`IMAGE_POSTPROCESS_COMMAND`
+variable. The variable specifies a list of functions to call once the
+build system has created the final image output files.
+
+.. note::
+
+ The entire image generation process is run under
+ Pseudo. Running under Pseudo ensures that the files in the root filesystem
+ have correct ownership.
+
+SDK Generation
+~~~~~~~~~~~~~~
+
+The OpenEmbedded build system uses BitBake to generate the Software
+Development Kit (SDK) installer scripts for both the standard SDK and
+the extensible SDK (eSDK):
+
+.. image:: figures/sdk-generation.png
+ :align: center
+
+.. note::
+
+ For more information on the cross-development toolchain generation,
+ see the ":ref:`overview-manual/concepts:cross-development toolchain generation`"
+ section. For information on advantages gained when building a
+ cross-development toolchain using the do_populate_sdk task, see the
+ ":ref:`sdk-manual/appendix-obtain:building an sdk installer`" section in
+ the Yocto Project Application Development and the Extensible Software
+ Development Kit (eSDK) manual.
+
+Like image generation, the SDK script process consists of several stages
+and depends on many variables. The
+:ref:`ref-tasks-populate_sdk`
+and
+:ref:`ref-tasks-populate_sdk_ext`
+tasks use these key variables to help create the list of packages to
+actually install. For information on the variables listed in the figure,
+see the "`Application Development SDK <#sdk-dev-environment>`__"
+section.
+
+The ``do_populate_sdk`` task helps create the standard SDK and handles
+two parts: a target part and a host part. The target part is the part
+built for the target hardware and includes libraries and headers. The
+host part is the part of the SDK that runs on the
+:term:`SDKMACHINE`.
+
+The ``do_populate_sdk_ext`` task helps create the extensible SDK and
+handles host and target parts differently than its counter part does for
+the standard SDK. For the extensible SDK, the task encapsulates the
+build system, which includes everything needed (host and target) for the
+SDK.
+
+Regardless of the type of SDK being constructed, the tasks perform some
+cleanup after which a cross-development environment setup script and any
+needed configuration files are created. The final output is the
+Cross-development toolchain installation script (``.sh`` file), which
+includes the environment setup script.
+
+Stamp Files and the Rerunning of Tasks
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+For each task that completes successfully, BitBake writes a stamp file
+into the :term:`STAMPS_DIR`
+directory. The beginning of the stamp file's filename is determined by
+the :term:`STAMP` variable, and the end
+of the name consists of the task's name and current `input
+checksum <#overview-checksums>`__.
+
+.. note::
+
+ This naming scheme assumes that
+ BB_SIGNATURE_HANDLER
+ is "OEBasicHash", which is almost always the case in current
+ OpenEmbedded.
+
+To determine if a task needs to be rerun, BitBake checks if a stamp file
+with a matching input checksum exists for the task. If such a stamp file
+exists, the task's output is assumed to exist and still be valid. If the
+file does not exist, the task is rerun.
+
+.. note::
+
+ The stamp mechanism is more general than the shared state (sstate)
+ cache mechanism described in the "`Setscene Tasks and Shared
+ State <#setscene-tasks-and-shared-state>`__" section. BitBake avoids
+ rerunning any task that has a valid stamp file, not just tasks that
+ can be accelerated through the sstate cache.
+
+ However, you should realize that stamp files only serve as a marker
+ that some work has been done and that these files do not record task
+ output. The actual task output would usually be somewhere in
+ :term:`TMPDIR` (e.g. in some
+ recipe's :term:`WORKDIR`.) What
+ the sstate cache mechanism adds is a way to cache task output that
+ can then be shared between build machines.
+
+Since ``STAMPS_DIR`` is usually a subdirectory of ``TMPDIR``, removing
+``TMPDIR`` will also remove ``STAMPS_DIR``, which means tasks will
+properly be rerun to repopulate ``TMPDIR``.
+
+If you want some task to always be considered "out of date", you can
+mark it with the :ref:`nostamp <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:variable flags>`
+varflag. If some other task depends on such a task, then that task will
+also always be considered out of date, which might not be what you want.
+
+For details on how to view information about a task's signature, see the
+":ref:`dev-manual/common-tasks:viewing task variable dependencies`"
+section in the Yocto Project Development Tasks Manual.
+
+Setscene Tasks and Shared State
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The description of tasks so far assumes that BitBake needs to build
+everything and no available prebuilt objects exist. BitBake does support
+skipping tasks if prebuilt objects are available. These objects are
+usually made available in the form of a shared state (sstate) cache.
+
+.. note::
+
+ For information on variables affecting sstate, see the
+ :term:`SSTATE_DIR`
+ and
+ :term:`SSTATE_MIRRORS`
+ variables.
+
+The idea of a setscene task (i.e ``do_``\ taskname\ ``_setscene``) is a
+version of the task where instead of building something, BitBake can
+skip to the end result and simply place a set of files into specific
+locations as needed. In some cases, it makes sense to have a setscene
+task variant (e.g. generating package files in the
+:ref:`do_package_write_* <ref-tasks-package_write_deb>`
+task). In other cases, it does not make sense (e.g. a
+:ref:`ref-tasks-patch` task or a
+:ref:`ref-tasks-unpack` task) since
+the work involved would be equal to or greater than the underlying task.
+
+In the build system, the common tasks that have setscene variants are
+:ref:`ref-tasks-package`,
+``do_package_write_*``,
+:ref:`ref-tasks-deploy`,
+:ref:`ref-tasks-packagedata`, and
+:ref:`ref-tasks-populate_sysroot`.
+Notice that these tasks represent most of the tasks whose output is an
+end result.
+
+The build system has knowledge of the relationship between these tasks
+and other preceding tasks. For example, if BitBake runs
+``do_populate_sysroot_setscene`` for something, it does not make sense
+to run any of the ``do_fetch``, ``do_unpack``, ``do_patch``,
+``do_configure``, ``do_compile``, and ``do_install`` tasks. However, if
+``do_package`` needs to be run, BitBake needs to run those other tasks.
+
+It becomes more complicated if everything can come from an sstate cache
+because some objects are simply not required at all. For example, you do
+not need a compiler or native tools, such as quilt, if nothing exists to
+compile or patch. If the ``do_package_write_*`` packages are available
+from sstate, BitBake does not need the ``do_package`` task data.
+
+To handle all these complexities, BitBake runs in two phases. The first
+is the "setscene" stage. During this stage, BitBake first checks the
+sstate cache for any targets it is planning to build. BitBake does a
+fast check to see if the object exists rather than a complete download.
+If nothing exists, the second phase, which is the setscene stage,
+completes and the main build proceeds.
+
+If objects are found in the sstate cache, the build system works
+backwards from the end targets specified by the user. For example, if an
+image is being built, the build system first looks for the packages
+needed for that image and the tools needed to construct an image. If
+those are available, the compiler is not needed. Thus, the compiler is
+not even downloaded. If something was found to be unavailable, or the
+download or setscene task fails, the build system then tries to install
+dependencies, such as the compiler, from the cache.
+
+The availability of objects in the sstate cache is handled by the
+function specified by the
+:term:`bitbake:BB_HASHCHECK_FUNCTION`
+variable and returns a list of available objects. The function specified
+by the
+:term:`bitbake:BB_SETSCENE_DEPVALID`
+variable is the function that determines whether a given dependency
+needs to be followed, and whether for any given relationship the
+function needs to be passed. The function returns a True or False value.
+
+Images
+------
+
+The images produced by the build system are compressed forms of the root
+filesystem and are ready to boot on a target device. You can see from
+the `general workflow figure <#general-workflow-figure>`__ that BitBake
+output, in part, consists of images. This section takes a closer look at
+this output:
+
+.. image:: figures/images.png
+ :align: center
+
+.. note::
+
+ For a list of example images that the Yocto Project provides, see the
+ ":doc:`/ref-manual/images`" chapter in the Yocto Project Reference
+ Manual.
+
+The build process writes images out to the :term:`Build Directory`
+inside the
+``tmp/deploy/images/machine/`` folder as shown in the figure. This
+folder contains any files expected to be loaded on the target device.
+The :term:`DEPLOY_DIR` variable
+points to the ``deploy`` directory, while the
+:term:`DEPLOY_DIR_IMAGE`
+variable points to the appropriate directory containing images for the
+current configuration.
+
+- kernel-image: A kernel binary file. The
+ :term:`KERNEL_IMAGETYPE`
+ variable determines the naming scheme for the kernel image file.
+ Depending on this variable, the file could begin with a variety of
+ naming strings. The ``deploy/images/``\ machine directory can contain
+ multiple image files for the machine.
+
+- root-filesystem-image: Root filesystems for the target device (e.g.
+ ``*.ext3`` or ``*.bz2`` files). The
+ :term:`IMAGE_FSTYPES`
+ variable determines the root filesystem image type. The
+ ``deploy/images/``\ machine directory can contain multiple root
+ filesystems for the machine.
+
+- kernel-modules: Tarballs that contain all the modules built for the
+ kernel. Kernel module tarballs exist for legacy purposes and can be
+ suppressed by setting the
+ :term:`MODULE_TARBALL_DEPLOY`
+ variable to "0". The ``deploy/images/``\ machine directory can
+ contain multiple kernel module tarballs for the machine.
+
+- bootloaders: If applicable to the target machine, bootloaders
+ supporting the image. The ``deploy/images/``\ machine directory can
+ contain multiple bootloaders for the machine.
+
+- symlinks: The ``deploy/images/``\ machine folder contains a symbolic
+ link that points to the most recently built file for each machine.
+ These links might be useful for external scripts that need to obtain
+ the latest version of each file.
+
+Application Development SDK
+---------------------------
+
+In the `general workflow figure <#general-workflow-figure>`__, the
+output labeled "Application Development SDK" represents an SDK. The SDK
+generation process differs depending on whether you build an extensible
+SDK (e.g. ``bitbake -c populate_sdk_ext`` imagename) or a standard SDK
+(e.g. ``bitbake -c populate_sdk`` imagename). This section takes a
+closer look at this output:
+
+.. image:: figures/sdk.png
+ :align: center
+
+The specific form of this output is a set of files that includes a
+self-extracting SDK installer (``*.sh``), host and target manifest
+files, and files used for SDK testing. When the SDK installer file is
+run, it installs the SDK. The SDK consists of a cross-development
+toolchain, a set of libraries and headers, and an SDK environment setup
+script. Running this installer essentially sets up your
+cross-development environment. You can think of the cross-toolchain as
+the "host" part because it runs on the SDK machine. You can think of the
+libraries and headers as the "target" part because they are built for
+the target hardware. The environment setup script is added so that you
+can initialize the environment before using the tools.
+
+.. note::
+
+ - The Yocto Project supports several methods by which you can set up
+ this cross-development environment. These methods include
+ downloading pre-built SDK installers or building and installing
+ your own SDK installer.
+
+ - For background information on cross-development toolchains in the
+ Yocto Project development environment, see the "`Cross-Development
+ Toolchain Generation <#cross-development-toolchain-generation>`__"
+ section.
+
+ - For information on setting up a cross-development environment, see
+ the :doc:`/sdk-manual/index` manual.
+
+All the output files for an SDK are written to the ``deploy/sdk`` folder
+inside the :term:`Build Directory` as
+shown in the previous figure. Depending on the type of SDK, several
+variables exist that help configure these files. The following list
+shows the variables associated with an extensible SDK:
+
+- :term:`DEPLOY_DIR`: Points to
+ the ``deploy`` directory.
+
+- :term:`SDK_EXT_TYPE`:
+ Controls whether or not shared state artifacts are copied into the
+ extensible SDK. By default, all required shared state artifacts are
+ copied into the SDK.
+
+- :term:`SDK_INCLUDE_PKGDATA`:
+ Specifies whether or not packagedata is included in the extensible
+ SDK for all recipes in the "world" target.
+
+- :term:`SDK_INCLUDE_TOOLCHAIN`:
+ Specifies whether or not the toolchain is included when building the
+ extensible SDK.
+
+- :term:`SDK_LOCAL_CONF_WHITELIST`:
+ A list of variables allowed through from the build system
+ configuration into the extensible SDK configuration.
+
+- :term:`SDK_LOCAL_CONF_BLACKLIST`:
+ A list of variables not allowed through from the build system
+ configuration into the extensible SDK configuration.
+
+- :term:`SDK_INHERIT_BLACKLIST`:
+ A list of classes to remove from the
+ :term:`INHERIT` value globally
+ within the extensible SDK configuration.
+
+This next list, shows the variables associated with a standard SDK:
+
+- :term:`DEPLOY_DIR`: Points to
+ the ``deploy`` directory.
+
+- :term:`SDKMACHINE`: Specifies
+ the architecture of the machine on which the cross-development tools
+ are run to create packages for the target hardware.
+
+- :term:`SDKIMAGE_FEATURES`:
+ Lists the features to include in the "target" part of the SDK.
+
+- :term:`TOOLCHAIN_HOST_TASK`:
+ Lists packages that make up the host part of the SDK (i.e. the part
+ that runs on the ``SDKMACHINE``). When you use
+ ``bitbake -c populate_sdk imagename`` to create the SDK, a set of
+ default packages apply. This variable allows you to add more
+ packages.
+
+- :term:`TOOLCHAIN_TARGET_TASK`:
+ Lists packages that make up the target part of the SDK (i.e. the part
+ built for the target hardware).
+
+- :term:`SDKPATH`: Defines the
+ default SDK installation path offered by the installation script.
+
+- :term:`SDK_HOST_MANIFEST`:
+ Lists all the installed packages that make up the host part of the
+ SDK. This variable also plays a minor role for extensible SDK
+ development as well. However, it is mainly used for the standard SDK.
+
+- :term:`SDK_TARGET_MANIFEST`:
+ Lists all the installed packages that make up the target part of the
+ SDK. This variable also plays a minor role for extensible SDK
+ development as well. However, it is mainly used for the standard SDK.
+
+Cross-Development Toolchain Generation
+======================================
+
+The Yocto Project does most of the work for you when it comes to
+creating :ref:`sdk-manual/intro:the cross-development toolchain`. This
+section provides some technical background on how cross-development
+toolchains are created and used. For more information on toolchains, you
+can also see the :doc:`/sdk-manual/index` manual.
+
+In the Yocto Project development environment, cross-development
+toolchains are used to build images and applications that run on the
+target hardware. With just a few commands, the OpenEmbedded build system
+creates these necessary toolchains for you.
+
+The following figure shows a high-level build environment regarding
+toolchain construction and use.
+
+.. image:: figures/cross-development-toolchains.png
+ :align: center
+
+Most of the work occurs on the Build Host. This is the machine used to
+build images and generally work within the the Yocto Project
+environment. When you run
+:term:`BitBake` to create an image, the
+OpenEmbedded build system uses the host ``gcc`` compiler to bootstrap a
+cross-compiler named ``gcc-cross``. The ``gcc-cross`` compiler is what
+BitBake uses to compile source files when creating the target image. You
+can think of ``gcc-cross`` simply as an automatically generated
+cross-compiler that is used internally within BitBake only.
+
+.. note::
+
+ The extensible SDK does not use
+ gcc-cross-canadian
+ since this SDK ships a copy of the OpenEmbedded build system and the
+ sysroot within it contains
+ gcc-cross
+ .
+
+The chain of events that occurs when the standard toolchain is bootstrapped:
+::
+
+ binutils-cross -> linux-libc-headers -> gcc-cross -> libgcc-initial -> glibc -> libgcc -> gcc-runtime
+
+- ``gcc``: The compiler, GNU Compiler Collection (GCC).
+
+- ``binutils-cross``: The binary utilities needed in order
+ to run the ``gcc-cross`` phase of the bootstrap operation and build the
+ headers for the C library.
+
+- ``linux-libc-headers``: Headers needed for the cross-compiler and C library build.
+
+- ``libgcc-initial``: An initial version of the gcc support library needed
+ to bootstrap ``glibc``.
+
+- ``libgcc``: The final version of the gcc support library which
+ can only be built once there is a C library to link against.
+
+- ``glibc``: The GNU C Library.
+
+- ``gcc-cross``: The final stage of the bootstrap process for the
+ cross-compiler. This stage results in the actual cross-compiler that
+ BitBake uses when it builds an image for a targeted device.
+
+ This tool is a "native" tool (i.e. it is designed to run on
+ the build host).
+
+- ``gcc-runtime``: Runtime libraries resulting from the toolchain
+ bootstrapping process. This tool produces a binary that consists of
+ the runtime libraries need for the targeted device.
+
+You can use the OpenEmbedded build system to build an installer for the
+relocatable SDK used to develop applications. When you run the
+installer, it installs the toolchain, which contains the development
+tools (e.g., ``gcc-cross-canadian``, ``binutils-cross-canadian``, and
+other ``nativesdk-*`` tools), which are tools native to the SDK (i.e.
+native to :term:`SDK_ARCH`), you
+need to cross-compile and test your software. The figure shows the
+commands you use to easily build out this toolchain. This
+cross-development toolchain is built to execute on the
+:term:`SDKMACHINE`, which might or
+might not be the same machine as the Build Host.
+
+.. note::
+
+ If your target architecture is supported by the Yocto Project, you
+ can take advantage of pre-built images that ship with the Yocto
+ Project and already contain cross-development toolchain installers.
+
+Here is the bootstrap process for the relocatable toolchain:
+::
+
+ gcc -> binutils-crosssdk -> gcc-crosssdk-initial -> linux-libc-headers -> glibc-initial -> nativesdk-glibc -> gcc-crosssdk -> gcc-cross-canadian
+
+- ``gcc``: The build host's GNU Compiler Collection (GCC).
+
+- ``binutils-crosssdk``: The bare minimum binary utilities needed in
+ order to run the ``gcc-crosssdk-initial`` phase of the bootstrap
+ operation.
+
+- ``gcc-crosssdk-initial``: An early stage of the bootstrap process for
+ creating the cross-compiler. This stage builds enough of the
+ ``gcc-crosssdk`` and supporting pieces so that the final stage of the
+ bootstrap process can produce the finished cross-compiler. This tool
+ is a "native" binary that runs on the build host.
+
+- ``linux-libc-headers``: Headers needed for the cross-compiler.
+
+- ``glibc-initial``: An initial version of the Embedded GLIBC needed to
+ bootstrap ``nativesdk-glibc``.
+
+- ``nativesdk-glibc``: The Embedded GLIBC needed to bootstrap the
+ ``gcc-crosssdk``.
+
+- ``gcc-crosssdk``: The final stage of the bootstrap process for the
+ relocatable cross-compiler. The ``gcc-crosssdk`` is a transitory
+ compiler and never leaves the build host. Its purpose is to help in
+ the bootstrap process to create the eventual ``gcc-cross-canadian``
+ compiler, which is relocatable. This tool is also a "native" package
+ (i.e. it is designed to run on the build host).
+
+- ``gcc-cross-canadian``: The final relocatable cross-compiler. When
+ run on the :term:`SDKMACHINE`,
+ this tool produces executable code that runs on the target device.
+ Only one cross-canadian compiler is produced per architecture since
+ they can be targeted at different processor optimizations using
+ configurations passed to the compiler through the compile commands.
+ This circumvents the need for multiple compilers and thus reduces the
+ size of the toolchains.
+
+.. note::
+
+ For information on advantages gained when building a
+ cross-development toolchain installer, see the
+ ":ref:`sdk-manual/appendix-obtain:building an sdk installer`" appendix
+ in the Yocto Project Application Development and the
+ Extensible Software Development Kit (eSDK) manual.
+
+Shared State Cache
+==================
+
+By design, the OpenEmbedded build system builds everything from scratch
+unless :term:`BitBake` can determine
+that parts do not need to be rebuilt. Fundamentally, building from
+scratch is attractive as it means all parts are built fresh and no
+possibility of stale data exists that can cause problems. When
+developers hit problems, they typically default back to building from
+scratch so they have a know state from the start.
+
+Building an image from scratch is both an advantage and a disadvantage
+to the process. As mentioned in the previous paragraph, building from
+scratch ensures that everything is current and starts from a known
+state. However, building from scratch also takes much longer as it
+generally means rebuilding things that do not necessarily need to be
+rebuilt.
+
+The Yocto Project implements shared state code that supports incremental
+builds. The implementation of the shared state code answers the
+following questions that were fundamental roadblocks within the
+OpenEmbedded incremental build support system:
+
+- What pieces of the system have changed and what pieces have not
+ changed?
+
+- How are changed pieces of software removed and replaced?
+
+- How are pre-built components that do not need to be rebuilt from
+ scratch used when they are available?
+
+For the first question, the build system detects changes in the "inputs"
+to a given task by creating a checksum (or signature) of the task's
+inputs. If the checksum changes, the system assumes the inputs have
+changed and the task needs to be rerun. For the second question, the
+shared state (sstate) code tracks which tasks add which output to the
+build process. This means the output from a given task can be removed,
+upgraded or otherwise manipulated. The third question is partly
+addressed by the solution for the second question assuming the build
+system can fetch the sstate objects from remote locations and install
+them if they are deemed to be valid.
+
+.. note::
+
+ - The build system does not maintain
+ :term:`PR` information as part of
+ the shared state packages. Consequently, considerations exist that
+ affect maintaining shared state feeds. For information on how the
+ build system works with packages and can track incrementing ``PR``
+ information, see the ":ref:`dev-manual/common-tasks:automatically incrementing a package version number`"
+ section in the Yocto Project Development Tasks Manual.
+
+ - The code in the build system that supports incremental builds is
+ not simple code. For techniques that help you work around issues
+ related to shared state code, see the
+ ":ref:`dev-manual/common-tasks:viewing metadata used to create the input signature of a shared state task`"
+ and
+ ":ref:`dev-manual/common-tasks:invalidating shared state to force a task to run`"
+ sections both in the Yocto Project Development Tasks Manual.
+
+The rest of this section goes into detail about the overall incremental
+build architecture, the checksums (signatures), and shared state.
+
+Overall Architecture
+--------------------
+
+When determining what parts of the system need to be built, BitBake
+works on a per-task basis rather than a per-recipe basis. You might
+wonder why using a per-task basis is preferred over a per-recipe basis.
+To help explain, consider having the IPK packaging backend enabled and
+then switching to DEB. In this case, the
+:ref:`ref-tasks-install` and
+:ref:`ref-tasks-package` task outputs
+are still valid. However, with a per-recipe approach, the build would
+not include the ``.deb`` files. Consequently, you would have to
+invalidate the whole build and rerun it. Rerunning everything is not the
+best solution. Also, in this case, the core must be "taught" much about
+specific tasks. This methodology does not scale well and does not allow
+users to easily add new tasks in layers or as external recipes without
+touching the packaged-staging core.
+
+Checksums (Signatures)
+----------------------
+
+The shared state code uses a checksum, which is a unique signature of a
+task's inputs, to determine if a task needs to be run again. Because it
+is a change in a task's inputs that triggers a rerun, the process needs
+to detect all the inputs to a given task. For shell tasks, this turns
+out to be fairly easy because the build process generates a "run" shell
+script for each task and it is possible to create a checksum that gives
+you a good idea of when the task's data changes.
+
+To complicate the problem, there are things that should not be included
+in the checksum. First, there is the actual specific build path of a
+given task - the :term:`WORKDIR`. It
+does not matter if the work directory changes because it should not
+affect the output for target packages. Also, the build process has the
+objective of making native or cross packages relocatable.
+
+.. note::
+
+ Both native and cross packages run on the
+ build host. However, cross packages generate output for the target
+ architecture.
+
+The checksum therefore needs to exclude ``WORKDIR``. The simplistic
+approach for excluding the work directory is to set ``WORKDIR`` to some
+fixed value and create the checksum for the "run" script.
+
+Another problem results from the "run" scripts containing functions that
+might or might not get called. The incremental build solution contains
+code that figures out dependencies between shell functions. This code is
+used to prune the "run" scripts down to the minimum set, thereby
+alleviating this problem and making the "run" scripts much more readable
+as a bonus.
+
+So far, solutions for shell scripts exist. What about Python tasks? The
+same approach applies even though these tasks are more difficult. The
+process needs to figure out what variables a Python function accesses
+and what functions it calls. Again, the incremental build solution
+contains code that first figures out the variable and function
+dependencies, and then creates a checksum for the data used as the input
+to the task.
+
+Like the ``WORKDIR`` case, situations exist where dependencies should be
+ignored. For these situations, you can instruct the build process to
+ignore a dependency by using a line like the following:
+::
+
+ PACKAGE_ARCHS[vardepsexclude] = "MACHINE"
+
+This example ensures that the :term:`PACKAGE_ARCHS` variable
+does not depend on the value of :term:`MACHINE`, even if it does
+reference it.
+
+Equally, there are cases where you need to add dependencies BitBake is
+not able to find. You can accomplish this by using a line like the
+following:
+::
+
+ PACKAGE_ARCHS[vardeps] = "MACHINE"
+
+This example explicitly
+adds the ``MACHINE`` variable as a dependency for ``PACKAGE_ARCHS``.
+
+As an example, consider a case with in-line Python where BitBake is not
+able to figure out dependencies. When running in debug mode (i.e. using
+``-DDD``), BitBake produces output when it discovers something for which
+it cannot figure out dependencies. The Yocto Project team has currently
+not managed to cover those dependencies in detail and is aware of the
+need to fix this situation.
+
+Thus far, this section has limited discussion to the direct inputs into
+a task. Information based on direct inputs is referred to as the
+"basehash" in the code. However, the question of a task's indirect
+inputs still exits - items already built and present in the
+:term:`Build Directory`. The checksum (or
+signature) for a particular task needs to add the hashes of all the
+tasks on which the particular task depends. Choosing which dependencies
+to add is a policy decision. However, the effect is to generate a master
+checksum that combines the basehash and the hashes of the task's
+dependencies.
+
+At the code level, a variety of ways exist by which both the basehash
+and the dependent task hashes can be influenced. Within the BitBake
+configuration file, you can give BitBake some extra information to help
+it construct the basehash. The following statement effectively results
+in a list of global variable dependency excludes (i.e. variables never
+included in any checksum):
+::
+
+ BB_HASHBASE_WHITELIST ?= "TMPDIR FILE PATH PWD BB_TASKHASH BBPATH DL_DIR \\
+ SSTATE_DIR THISDIR FILESEXTRAPATHS FILE_DIRNAME HOME LOGNAME SHELL TERM \\
+ USER FILESPATH STAGING_DIR_HOST STAGING_DIR_TARGET COREBASE PRSERV_HOST \\
+ PRSERV_DUMPDIR PRSERV_DUMPFILE PRSERV_LOCKDOWN PARALLEL_MAKE \\
+ CCACHE_DIR EXTERNAL_TOOLCHAIN CCACHE CCACHE_DISABLE LICENSE_PATH SDKPKGSUFFIX"
+
+The
+previous example excludes
+:term:`WORKDIR` since that variable
+is actually constructed as a path within
+:term:`TMPDIR`, which is on the
+whitelist.
+
+The rules for deciding which hashes of dependent tasks to include
+through dependency chains are more complex and are generally
+accomplished with a Python function. The code in
+``meta/lib/oe/sstatesig.py`` shows two examples of this and also
+illustrates how you can insert your own policy into the system if so
+desired. This file defines the two basic signature generators
+:term:`OpenEmbedded-Core (OE-Core)` uses: "OEBasic" and
+"OEBasicHash". By default, a dummy "noop" signature handler is enabled
+in BitBake. This means that behavior is unchanged from previous
+versions. OE-Core uses the "OEBasicHash" signature handler by default
+through this setting in the ``bitbake.conf`` file:
+::
+
+ BB_SIGNATURE_HANDLER ?= "OEBasicHash"
+
+The "OEBasicHash" ``BB_SIGNATURE_HANDLER`` is the same
+as the "OEBasic" version but adds the task hash to the `stamp
+files <#stamp-files-and-the-rerunning-of-tasks>`__. This results in any
+metadata change that changes the task hash, automatically causing the
+task to be run again. This removes the need to bump
+:term:`PR` values, and changes to metadata
+automatically ripple across the build.
+
+It is also worth noting that the end result of these signature
+generators is to make some dependency and hash information available to
+the build. This information includes:
+
+- ``BB_BASEHASH_task-``\ taskname: The base hashes for each task in the
+ recipe.
+
+- ``BB_BASEHASH_``\ filename\ ``:``\ taskname: The base hashes for each
+ dependent task.
+
+- ``BBHASHDEPS_``\ filename\ ``:``\ taskname: The task dependencies for
+ each task.
+
+- ``BB_TASKHASH``: The hash of the currently running task.
+
+Shared State
+------------
+
+Checksums and dependencies, as discussed in the previous section, solve
+half the problem of supporting a shared state. The other half of the
+problem is being able to use checksum information during the build and
+being able to reuse or rebuild specific components.
+
+The :ref:`sstate <ref-classes-sstate>` class is a
+relatively generic implementation of how to "capture" a snapshot of a
+given task. The idea is that the build process does not care about the
+source of a task's output. Output could be freshly built or it could be
+downloaded and unpacked from somewhere. In other words, the build
+process does not need to worry about its origin.
+
+Two types of output exist. One type is just about creating a directory
+in :term:`WORKDIR`. A good example is
+the output of either
+:ref:`ref-tasks-install` or
+:ref:`ref-tasks-package`. The other
+type of output occurs when a set of data is merged into a shared
+directory tree such as the sysroot.
+
+The Yocto Project team has tried to keep the details of the
+implementation hidden in ``sstate`` class. From a user's perspective,
+adding shared state wrapping to a task is as simple as this
+:ref:`ref-tasks-deploy` example taken
+from the :ref:`deploy <ref-classes-deploy>` class:
+::
+
+ DEPLOYDIR = "${WORKDIR}/deploy-${PN}"
+ SSTATETASKS += "do_deploy"
+ do_deploy[sstate-inputdirs] = "${DEPLOYDIR}"
+ do_deploy[sstate-outputdirs] = "${DEPLOY_DIR_IMAGE}"
+
+ python do_deploy_setscene () {
+ sstate_setscene(d)
+ }
+ addtask do_deploy_setscene
+ do_deploy[dirs] = "${DEPLOYDIR} ${B}"
+ do_deploy[stamp-extra-info] = "${MACHINE_ARCH}"
+
+The following list explains the previous example:
+
+- Adding "do_deploy" to ``SSTATETASKS`` adds some required
+ sstate-related processing, which is implemented in the
+ :ref:`sstate <ref-classes-sstate>` class, to
+ before and after the
+ :ref:`ref-tasks-deploy` task.
+
+- The ``do_deploy[sstate-inputdirs] = "${DEPLOYDIR}"`` declares that
+ ``do_deploy`` places its output in ``${DEPLOYDIR}`` when run normally
+ (i.e. when not using the sstate cache). This output becomes the input
+ to the shared state cache.
+
+- The ``do_deploy[sstate-outputdirs] = "${DEPLOY_DIR_IMAGE}"`` line
+ causes the contents of the shared state cache to be copied to
+ ``${DEPLOY_DIR_IMAGE}``.
+
+ .. note::
+
+ If ``do_deploy`` is not already in the shared state cache or if its input
+ checksum (signature) has changed from when the output was cached, the task
+ runs to populate the shared state cache, after which the contents of the
+ shared state cache is copied to ${:term:`DEPLOY_DIR_IMAGE`}. If
+ ``do_deploy`` is in the shared state cache and its signature indicates
+ that the cached output is still valid (i.e. if no relevant task inputs
+ have changed), then the contents of the shared state cache copies
+ directly to ${``DEPLOY_DIR_IMAGE``} by the ``do_deploy_setscene`` task
+ instead, skipping the ``do_deploy`` task.
+
+- The following task definition is glue logic needed to make the
+ previous settings effective:
+ ::
+
+ python do_deploy_setscene () {
+ sstate_setscene(d)
+ }
+ addtask do_deploy_setscene
+
+ ``sstate_setscene()`` takes the flags above as input and accelerates the ``do_deploy`` task
+ through the shared state cache if possible. If the task was
+ accelerated, ``sstate_setscene()`` returns True. Otherwise, it
+ returns False, and the normal ``do_deploy`` task runs. For more
+ information, see the ":ref:`setscene <bitbake:bitbake-user-manual/bitbake-user-manual-execution:setscene>`"
+ section in the BitBake User Manual.
+
+- The ``do_deploy[dirs] = "${DEPLOYDIR} ${B}"`` line creates
+ ``${DEPLOYDIR}`` and ``${B}`` before the ``do_deploy`` task runs, and
+ also sets the current working directory of ``do_deploy`` to ``${B}``.
+ For more information, see the ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-metadata:variable flags`"
+ section in the BitBake
+ User Manual.
+
+ .. note::
+
+ In cases where ``sstate-inputdirs`` and ``sstate-outputdirs`` would be
+ the same, you can use ``sstate-plaindirs``. For example, to preserve the
+ ${:term:`PKGD`} and ${:term:`PKGDEST`} output from the ``do_package``
+ task, use the following:
+ ::
+
+ do_package[sstate-plaindirs] = "${PKGD} ${PKGDEST}"
+
+
+- The ``do_deploy[stamp-extra-info] = "${MACHINE_ARCH}"`` line appends
+ extra metadata to the `stamp
+ file <#stamp-files-and-the-rerunning-of-tasks>`__. In this case, the
+ metadata makes the task specific to a machine's architecture. See
+ ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-execution:the task list`"
+ section in the BitBake User Manual for more information on the
+ ``stamp-extra-info`` flag.
+
+- ``sstate-inputdirs`` and ``sstate-outputdirs`` can also be used with
+ multiple directories. For example, the following declares
+ ``PKGDESTWORK`` and ``SHLIBWORK`` as shared state input directories,
+ which populates the shared state cache, and ``PKGDATA_DIR`` and
+ ``SHLIBSDIR`` as the corresponding shared state output directories:
+ ::
+
+ do_package[sstate-inputdirs] = "${PKGDESTWORK} ${SHLIBSWORKDIR}"
+ do_package[sstate-outputdirs] = "${PKGDATA_DIR} ${SHLIBSDIR}"
+
+- These methods also include the ability to take a lockfile when
+ manipulating shared state directory structures, for cases where file
+ additions or removals are sensitive:
+ ::
+
+ do_package[sstate-lockfile] = "${PACKAGELOCK}"
+
+Behind the scenes, the shared state code works by looking in
+:term:`SSTATE_DIR` and
+:term:`SSTATE_MIRRORS` for
+shared state files. Here is an example:
+::
+
+ SSTATE_MIRRORS ?= "\
+ file://.\* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+ file://.\* file:///some/local/dir/sstate/PATH"
+
+.. note::
+
+ The shared state directory (``SSTATE_DIR``) is organized into two-character
+ subdirectories, where the subdirectory names are based on the first two
+ characters of the hash.
+ If the shared state directory structure for a mirror has the same structure
+ as ``SSTATE_DIR``, you must specify "PATH" as part of the URI to enable the build
+ system to map to the appropriate subdirectory.
+
+The shared state package validity can be detected just by looking at the
+filename since the filename contains the task checksum (or signature) as
+described earlier in this section. If a valid shared state package is
+found, the build process downloads it and uses it to accelerate the
+task.
+
+The build processes use the ``*_setscene`` tasks for the task
+acceleration phase. BitBake goes through this phase before the main
+execution code and tries to accelerate any tasks for which it can find
+shared state packages. If a shared state package for a task is
+available, the shared state package is used. This means the task and any
+tasks on which it is dependent are not executed.
+
+As a real world example, the aim is when building an IPK-based image,
+only the
+:ref:`ref-tasks-package_write_ipk`
+tasks would have their shared state packages fetched and extracted.
+Since the sysroot is not used, it would never get extracted. This is
+another reason why a task-based approach is preferred over a
+recipe-based approach, which would have to install the output from every
+task.
+
+Automatically Added Runtime Dependencies
+========================================
+
+The OpenEmbedded build system automatically adds common types of runtime
+dependencies between packages, which means that you do not need to
+explicitly declare the packages using
+:term:`RDEPENDS`. Three automatic
+mechanisms exist (``shlibdeps``, ``pcdeps``, and ``depchains``) that
+handle shared libraries, package configuration (pkg-config) modules, and
+``-dev`` and ``-dbg`` packages, respectively. For other types of runtime
+dependencies, you must manually declare the dependencies.
+
+- ``shlibdeps``: During the
+ :ref:`ref-tasks-package` task of
+ each recipe, all shared libraries installed by the recipe are
+ located. For each shared library, the package that contains the
+ shared library is registered as providing the shared library. More
+ specifically, the package is registered as providing the
+ `soname <https://en.wikipedia.org/wiki/Soname>`__ of the library. The
+ resulting shared-library-to-package mapping is saved globally in
+ :term:`PKGDATA_DIR` by the
+ :ref:`ref-tasks-packagedata`
+ task.
+
+ Simultaneously, all executables and shared libraries installed by the
+ recipe are inspected to see what shared libraries they link against.
+ For each shared library dependency that is found, ``PKGDATA_DIR`` is
+ queried to see if some package (likely from a different recipe)
+ contains the shared library. If such a package is found, a runtime
+ dependency is added from the package that depends on the shared
+ library to the package that contains the library.
+
+ The automatically added runtime dependency also includes a version
+ restriction. This version restriction specifies that at least the
+ current version of the package that provides the shared library must
+ be used, as if "package (>= version)" had been added to ``RDEPENDS``.
+ This forces an upgrade of the package containing the shared library
+ when installing the package that depends on the library, if needed.
+
+ If you want to avoid a package being registered as providing a
+ particular shared library (e.g. because the library is for internal
+ use only), then add the library to
+ :term:`PRIVATE_LIBS` inside
+ the package's recipe.
+
+- ``pcdeps``: During the ``do_package`` task of each recipe, all
+ pkg-config modules (``*.pc`` files) installed by the recipe are
+ located. For each module, the package that contains the module is
+ registered as providing the module. The resulting module-to-package
+ mapping is saved globally in ``PKGDATA_DIR`` by the
+ ``do_packagedata`` task.
+
+ Simultaneously, all pkg-config modules installed by the recipe are
+ inspected to see what other pkg-config modules they depend on. A
+ module is seen as depending on another module if it contains a
+ "Requires:" line that specifies the other module. For each module
+ dependency, ``PKGDATA_DIR`` is queried to see if some package
+ contains the module. If such a package is found, a runtime dependency
+ is added from the package that depends on the module to the package
+ that contains the module.
+
+ .. note::
+
+ The
+ pcdeps
+ mechanism most often infers dependencies between
+ -dev
+ packages.
+
+- ``depchains``: If a package ``foo`` depends on a package ``bar``,
+ then ``foo-dev`` and ``foo-dbg`` are also made to depend on
+ ``bar-dev`` and ``bar-dbg``, respectively. Taking the ``-dev``
+ packages as an example, the ``bar-dev`` package might provide headers
+ and shared library symlinks needed by ``foo-dev``, which shows the
+ need for a dependency between the packages.
+
+ The dependencies added by ``depchains`` are in the form of
+ :term:`RRECOMMENDS`.
+
+ .. note::
+
+ By default, ``foo-dev`` also has an ``RDEPENDS``-style dependency on
+ ``foo``, because the default value of ``RDEPENDS_${PN}-dev`` (set in
+ bitbake.conf) includes "${PN}".
+
+ To ensure that the dependency chain is never broken, ``-dev`` and
+ ``-dbg`` packages are always generated by default, even if the
+ packages turn out to be empty. See the
+ :term:`ALLOW_EMPTY` variable
+ for more information.
+
+The ``do_package`` task depends on the ``do_packagedata`` task of each
+recipe in :term:`DEPENDS` through use
+of a ``[``\ :ref:`deptask <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:variable flags>`\ ``]``
+declaration, which guarantees that the required
+shared-library/module-to-package mapping information will be available
+when needed as long as ``DEPENDS`` has been correctly set.
+
+Fakeroot and Pseudo
+===================
+
+Some tasks are easier to implement when allowed to perform certain
+operations that are normally reserved for the root user (e.g.
+:ref:`ref-tasks-install`,
+:ref:`do_package_write* <ref-tasks-package_write_deb>`,
+:ref:`ref-tasks-rootfs`, and
+:ref:`do_image* <ref-tasks-image>`). For example,
+the ``do_install`` task benefits from being able to set the UID and GID
+of installed files to arbitrary values.
+
+One approach to allowing tasks to perform root-only operations would be
+to require :term:`BitBake` to run as
+root. However, this method is cumbersome and has security issues. The
+approach that is actually used is to run tasks that benefit from root
+privileges in a "fake" root environment. Within this environment, the
+task and its child processes believe that they are running as the root
+user, and see an internally consistent view of the filesystem. As long
+as generating the final output (e.g. a package or an image) does not
+require root privileges, the fact that some earlier steps ran in a fake
+root environment does not cause problems.
+
+The capability to run tasks in a fake root environment is known as
+"`fakeroot <http://man.he.net/man1/fakeroot>`__", which is derived from
+the BitBake keyword/variable flag that requests a fake root environment
+for a task.
+
+In the :term:`OpenEmbedded Build System`,
+the program that
+implements fakeroot is known as
+`Pseudo <https://www.yoctoproject.org/software-item/pseudo/>`__. Pseudo
+overrides system calls by using the environment variable ``LD_PRELOAD``,
+which results in the illusion of running as root. To keep track of
+"fake" file ownership and permissions resulting from operations that
+require root permissions, Pseudo uses an SQLite 3 database. This
+database is stored in
+``${``\ :term:`WORKDIR`\ ``}/pseudo/files.db``
+for individual recipes. Storing the database in a file as opposed to in
+memory gives persistence between tasks and builds, which is not
+accomplished using fakeroot.
+
+.. note::
+
+ If you add your own task that manipulates the same files or
+ directories as a fakeroot task, then that task also needs to run
+ under fakeroot. Otherwise, the task cannot run root-only operations,
+ and cannot see the fake file ownership and permissions set by the
+ other task. You need to also add a dependency on
+ virtual/fakeroot-native:do_populate_sysroot
+ , giving the following:
+ ::
+
+ fakeroot do_mytask () {
+ ...
+ }
+ do_mytask[depends] += "virtual/fakeroot-native:do_populate_sysroot"
+
+
+For more information, see the
+:term:`FAKEROOT* <bitbake:FAKEROOT>` variables in the
+BitBake User Manual. You can also reference the "`Why Not
+Fakeroot? <https://github.com/wrpseudo/pseudo/wiki/WhyNotFakeroot>`__"
+article for background information on Fakeroot and Pseudo.