poky: subtree update:0ac99625bf..796be0593a
Alexander Kanavin (31):
netbase: upgrade 6.1 -> 6.2
meson: upgrade 0.55.1 -> 0.56.0
vulkan-samples: update to latest revision
libcap: update 2.44 -> 2.45
bind: upgrade 9.16.7 -> 9.16.9
quota: upgrade 4.05 -> 4.06
pango: upgrade 1.46.2 -> 1.48.0
elfutils: upgrade 0.181 -> 0.182
ifupdown: upgrade 0.8.35 -> 0.8.36
createrepo-c: upgrade 0.16.1 -> 0.16.2
acpica: upgrade 20200925 -> 20201113
grep: upgrade 3.5 -> 3.6
man-pages: upgrade 5.08 -> 5.09
stress-ng: upgrade 0.11.23 -> 0.11.24
libhandy: upgrade 1.0.1 -> 1.0.2
piglit: upgrade to latest revision
xkbcomp: upgrade 1.4.3 -> 1.4.4
lz4: upgrade 1.9.2 -> 1.9.3
bison: upgrade 3.7.3 -> 3.7.4
python3-setuptools-scm: fix upstream version check
cantarell-fonts: update 0.0.25 -> 0.201
meta/lib/oe/reproducible.py: gitsm:// works just as fine as git:// for timestamps
llvm: fix reproducibility
ruby: fix reproducibility
webkitgtk: fix reproducibility
ffmpeg: fix reproducibility
piglit: fix reproducibility
serf: do not install the static library
llvm: sort the lists in generated source reproducibibly
kea: fix reproducibility
poky.conf: do not write current date into distro version, use git hash instead
Andrej Valek (1):
kernel-dummy: fix executing unexpected tasks
Anuj Mittal (1):
releases.rst: add gatesgarth to current releases
Brett Warren (1):
libffi: add patch to revert clang VFP workaround
Chandana kalluri (1):
populate_sdk_ext: use SDK_CUSTOM_TEPLATECONF variable to enable custom templateconf.cfg
Changqing Li (1):
buildtools-tarball: add wic dependency into extended buildtools
Diego Sueiro (2):
modutils-initscripts: Fix modules.dep creation when USE_DEPMOD="0"
initscripts: Change execution order between checkroot and modutils
Dmitry Baryshkov (2):
linux-firmware: upgrade 20201022 -> 20201118
linux-firmware: package ath11k firmware
Fabio Berton (1):
mesa: Update 20.2.1 -> 20.2.4
Gratian Crisan (1):
kernel-module-split.bbclass: fix kernel modules getting marked as CONFFILES
Jack Mitchell (3):
Revert "connman: set service to conflict with systemd-networkd"
systemd-conf: add PACKAGECONFIG to enable/disable auto ethernet DHCP
systemd-conf: match ethernet interfaces by type rather than globbing
Joshua Watt (2):
bitbake: hashserv: client: Fix AF_UNIX path length limits
bitbake: hashserv: Fix broken AF_UNIX path length limit
Kai Kang (2):
systemd-systemctl-native: capable to call without argument
systemd.bbclass: update command to check systemctl available
Kevin Hao (1):
tune-octeontx2.inc: Add tune for Marvell OCTEON TX2 core
Li Wang (2):
qemu: CVE-2020-29129 CVE-2020-29130
qemu: CVE-2020-25624
Luca Boccassi (1):
dbus: move messagebus user to dbus-common package
Michael Halstead (1):
releases: conf: add link to 3.1.4, update to include 3.1.4
Nicolas Dechesne (19):
sphinx: add .vscode in .gitignore
{dev,kernel,sdk}-manual: replace hardcoded release version with &DISTRO;
sphinx: replace bitbake labels with references to corresponding title
brief-yoctoprojectqs: replace labels with references to section title
dev-manual: replace labels with references to section title
ref-manual: replace labels with references to section title
sdk-manual: replace labels with references to section title
overview-manual: remove unused labels
dev-manual: remove unused labels
sphinx: rename top level document in each manual
sphinx: use absolute paths for :doc: references
test-manual: remove 'test-manual' from filenames
toaster-manual: remove 'toaster-manual' from filenames
dev-manual: remove 'dev-manual' from filenames
kernel-dev: remove 'kernel-dev' from filenames
profile-manual: remove 'profile-manual' from filenames
overview-manual: remove 'overview-manual' from filenames
sdk-manual: remove 'sdk' from filenames
ref-manual: remove 'ref' from filenames
Paul Barker (5):
documentation: Simplify yocto_wiki links
documentation: Simplify yocto_git links
ref-manual: Simplify oe_git links
poky.conf: Add opensuseleap-15.2 and fedora-33 to tested distros
poky.conf: Drop fedora-30 from tested distros
Peter Kjellerstedt (2):
pseudo: Simplify pseudo_client_ignore_path_chroot()
bitbake.conf: Add all layers (from BBLAYERS) to PSEUDO_IGNORE_PATHS
Richard Purdie (8):
lz4: Use the new branch naming from upstream
Revert "bitbake.conf: Add all layers (from BBLAYERS) to PSEUDO_IGNORE_PATHS"
build-appliance-image: Update to master head revision
bitbake: Revert "fetch2: use relative symlinks for anything pulled from PREMIRRORS"
build-appliance-image: Update to master head revision
metadata_scm: Fix signature handling of METADATA_REVISION and METADATA_BRANCH
poky: Set SDK_VERSION explicitly
build-appliance-image: Update to master head revision
Ross Burton (9):
oeqa/devtool: use Yocto mirror for pv-1.5.3 tarball
image_types: remove obsolete tar comment
image_types: sort tarball file listings
package_manager/ipk: neaten OPKGLIBDIR logic
ldconfig-native: don't write auxiliary cache
package_manager/ipk: improve remove_packaging_data
oeqa/selftest/containerimage: update for improved cleanup
coreutils: add SUSE-specific issues to CVE whitelist
bitbake: msg: use safe YAML loader
Sinan Kaya (1):
poky-tiny: enable section removal
Tomasz Dziendzielski (1):
pseudo: Update to print PSEUDO_LOGFILE in abort message on path mismatches
sangeeta jain (1):
meta/lib/oeqa/manual/oe-core.json: Update test_bitbake_devshell
zangrc (3):
libinput: upgrade 1.16.3 -> 1.16.4
lighttpd: upgrade 1.4.55 -> 1.4.56
sysstat: upgrade 12.4.0 -> 12.4.1
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I65f2f1c9d44433f3e62609240012c42256679b51
diff --git a/poky/documentation/ref-manual/tasks.rst b/poky/documentation/ref-manual/tasks.rst
new file mode 100644
index 0000000..9fe1c29
--- /dev/null
+++ b/poky/documentation/ref-manual/tasks.rst
@@ -0,0 +1,844 @@
+.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
+
+*****
+Tasks
+*****
+
+Tasks are units of execution for BitBake. Recipes (``.bb`` files) use
+tasks to complete configuring, compiling, and packaging software. This
+chapter provides a reference of the tasks defined in the OpenEmbedded
+build system.
+
+Normal Recipe Build Tasks
+=========================
+
+The following sections describe normal tasks associated with building a
+recipe. For more information on tasks and dependencies, see the
+":ref:`Tasks <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:tasks>`" and
+":ref:`Dependencies <bitbake:bitbake-user-manual/bitbake-user-manual-execution:dependencies>`" sections in the
+BitBake User Manual.
+
+.. _ref-tasks-build:
+
+``do_build``
+------------
+
+The default task for all recipes. This task depends on all other normal
+tasks required to build a recipe.
+
+.. _ref-tasks-compile:
+
+``do_compile``
+--------------
+
+Compiles the source code. This task runs with the current working
+directory set to ``${``\ :term:`B`\ ``}``.
+
+The default behavior of this task is to run the ``oe_runmake`` function
+if a makefile (``Makefile``, ``makefile``, or ``GNUmakefile``) is found.
+If no such file is found, the ``do_compile`` task does nothing.
+
+.. _ref-tasks-compile_ptest_base:
+
+``do_compile_ptest_base``
+-------------------------
+
+Compiles the runtime test suite included in the software being built.
+
+.. _ref-tasks-configure:
+
+``do_configure``
+----------------
+
+Configures the source by enabling and disabling any build-time and
+configuration options for the software being built. The task runs with
+the current working directory set to ``${``\ :term:`B`\ ``}``.
+
+The default behavior of this task is to run ``oe_runmake clean`` if a
+makefile (``Makefile``, ``makefile``, or ``GNUmakefile``) is found and
+:term:`CLEANBROKEN` is not set to "1". If no such
+file is found or the ``CLEANBROKEN`` variable is set to "1", the
+``do_configure`` task does nothing.
+
+.. _ref-tasks-configure_ptest_base:
+
+``do_configure_ptest_base``
+---------------------------
+
+Configures the runtime test suite included in the software being built.
+
+.. _ref-tasks-deploy:
+
+``do_deploy``
+-------------
+
+Writes output files that are to be deployed to
+``${``\ :term:`DEPLOY_DIR_IMAGE`\ ``}``. The
+task runs with the current working directory set to
+``${``\ :term:`B`\ ``}``.
+
+Recipes implementing this task should inherit the
+:ref:`deploy <ref-classes-deploy>` class and should write the output
+to ``${``\ :term:`DEPLOYDIR`\ ``}``, which is not to be
+confused with ``${DEPLOY_DIR}``. The ``deploy`` class sets up
+``do_deploy`` as a shared state (sstate) task that can be accelerated
+through sstate use. The sstate mechanism takes care of copying the
+output from ``${DEPLOYDIR}`` to ``${DEPLOY_DIR_IMAGE}``.
+
+.. note::
+
+ Do not write the output directly to ``${DEPLOY_DIR_IMAGE}``, as this causes
+ the sstate mechanism to malfunction.
+
+The ``do_deploy`` task is not added as a task by default and
+consequently needs to be added manually. If you want the task to run
+after :ref:`ref-tasks-compile`, you can add it by doing
+the following:
+::
+
+ addtask deploy after do_compile
+
+Adding ``do_deploy`` after other tasks works the same way.
+
+.. note::
+
+ You do not need to add ``before do_build`` to the ``addtask`` command
+ (though it is harmless), because the ``base`` class contains the following:
+ ::
+
+ do_build[recrdeptask] += "do_deploy"
+
+
+ See the ":ref:`bitbake-user-manual/bitbake-user-manual-execution:dependencies`"
+ section in the BitBake User Manual for more information.
+
+If the ``do_deploy`` task re-executes, any previous output is removed
+(i.e. "cleaned").
+
+.. _ref-tasks-fetch:
+
+``do_fetch``
+------------
+
+Fetches the source code. This task uses the
+:term:`SRC_URI` variable and the argument's prefix to
+determine the correct :ref:`fetcher <bitbake:bitbake-user-manual/bitbake-user-manual-fetching:fetchers>`
+module.
+
+.. _ref-tasks-image:
+
+``do_image``
+------------
+
+Starts the image generation process. The ``do_image`` task runs after
+the OpenEmbedded build system has run the
+:ref:`ref-tasks-rootfs` task during which packages are
+identified for installation into the image and the root filesystem is
+created, complete with post-processing.
+
+The ``do_image`` task performs pre-processing on the image through the
+:term:`IMAGE_PREPROCESS_COMMAND` and
+dynamically generates supporting ``do_image_*`` tasks as needed.
+
+For more information on image creation, see the ":ref:`overview-manual/concepts:image generation`"
+section in the Yocto Project Overview and Concepts Manual.
+
+.. _ref-tasks-image-complete:
+
+``do_image_complete``
+---------------------
+
+Completes the image generation process. The ``do_image_complete`` task
+runs after the OpenEmbedded build system has run the
+:ref:`ref-tasks-image` task during which image
+pre-processing occurs and through dynamically generated ``do_image_*``
+tasks the image is constructed.
+
+The ``do_image_complete`` task performs post-processing on the image
+through the
+:term:`IMAGE_POSTPROCESS_COMMAND`.
+
+For more information on image creation, see the
+":ref:`overview-manual/concepts:image generation`"
+section in the Yocto Project Overview and Concepts Manual.
+
+.. _ref-tasks-install:
+
+``do_install``
+--------------
+
+Copies files that are to be packaged into the holding area
+``${``\ :term:`D`\ ``}``. This task runs with the current
+working directory set to ``${``\ :term:`B`\ ``}``, which is the
+compilation directory. The ``do_install`` task, as well as other tasks
+that either directly or indirectly depend on the installed files (e.g.
+:ref:`ref-tasks-package`, ``do_package_write_*``, and
+:ref:`ref-tasks-rootfs`), run under
+:ref:`fakeroot <overview-manual/concepts:fakeroot and pseudo>`.
+
+.. note::
+
+ When installing files, be careful not to set the owner and group IDs
+ of the installed files to unintended values. Some methods of copying
+ files, notably when using the recursive ``cp`` command, can preserve
+ the UID and/or GID of the original file, which is usually not what
+ you want. The ``host-user-contaminated`` QA check checks for files
+ that probably have the wrong ownership.
+
+ Safe methods for installing files include the following:
+
+ - The ``install`` utility. This utility is the preferred method.
+
+ - The ``cp`` command with the "--no-preserve=ownership" option.
+
+ - The ``tar`` command with the "--no-same-owner" option. See the
+ ``bin_package.bbclass`` file in the ``meta/classes`` directory of
+ the :term:`Source Directory` for an example.
+
+.. _ref-tasks-install_ptest_base:
+
+``do_install_ptest_base``
+-------------------------
+
+Copies the runtime test suite files from the compilation directory to a
+holding area.
+
+.. _ref-tasks-package:
+
+``do_package``
+--------------
+
+Analyzes the content of the holding area
+``${``\ :term:`D`\ ``}`` and splits the content into subsets
+based on available packages and files. This task makes use of the
+:term:`PACKAGES` and :term:`FILES`
+variables.
+
+The ``do_package`` task, in conjunction with the
+:ref:`ref-tasks-packagedata` task, also saves some
+important package metadata. For additional information, see the
+:term:`PKGDESTWORK` variable and the
+":ref:`overview-manual/concepts:automatically added runtime dependencies`"
+section in the Yocto Project Overview and Concepts Manual.
+
+.. _ref-tasks-package_qa:
+
+``do_package_qa``
+-----------------
+
+Runs QA checks on packaged files. For more information on these checks,
+see the :ref:`insane <ref-classes-insane>` class.
+
+.. _ref-tasks-package_write_deb:
+
+``do_package_write_deb``
+------------------------
+
+Creates Debian packages (i.e. ``*.deb`` files) and places them in the
+``${``\ :term:`DEPLOY_DIR_DEB`\ ``}`` directory in
+the package feeds area. For more information, see the
+":ref:`overview-manual/concepts:package feeds`" section in
+the Yocto Project Overview and Concepts Manual.
+
+.. _ref-tasks-package_write_ipk:
+
+``do_package_write_ipk``
+------------------------
+
+Creates IPK packages (i.e. ``*.ipk`` files) and places them in the
+``${``\ :term:`DEPLOY_DIR_IPK`\ ``}`` directory in
+the package feeds area. For more information, see the
+":ref:`overview-manual/concepts:package feeds`" section in
+the Yocto Project Overview and Concepts Manual.
+
+.. _ref-tasks-package_write_rpm:
+
+``do_package_write_rpm``
+------------------------
+
+Creates RPM packages (i.e. ``*.rpm`` files) and places them in the
+``${``\ :term:`DEPLOY_DIR_RPM`\ ``}`` directory in
+the package feeds area. For more information, see the
+":ref:`overview-manual/concepts:package feeds`" section in
+the Yocto Project Overview and Concepts Manual.
+
+.. _ref-tasks-package_write_tar:
+
+``do_package_write_tar``
+------------------------
+
+Creates tarballs and places them in the
+``${``\ :term:`DEPLOY_DIR_TAR`\ ``}`` directory in
+the package feeds area. For more information, see the
+":ref:`overview-manual/concepts:package feeds`" section in
+the Yocto Project Overview and Concepts Manual.
+
+.. _ref-tasks-packagedata:
+
+``do_packagedata``
+------------------
+
+Saves package metadata generated by the
+:ref:`ref-tasks-package` task in
+:term:`PKGDATA_DIR` to make it available globally.
+
+.. _ref-tasks-patch:
+
+``do_patch``
+------------
+
+Locates patch files and applies them to the source code.
+
+After fetching and unpacking source files, the build system uses the
+recipe's :term:`SRC_URI` statements
+to locate and apply patch files to the source code.
+
+.. note::
+
+ The build system uses the :term:`FILESPATH` variable to determine the
+ default set of directories when searching for patches.
+
+Patch files, by default, are ``*.patch`` and ``*.diff`` files created
+and kept in a subdirectory of the directory holding the recipe file. For
+example, consider the
+:yocto_git:`bluez5 </poky/tree/meta/recipes-connectivity/bluez5>`
+recipe from the OE-Core layer (i.e. ``poky/meta``):
+::
+
+ poky/meta/recipes-connectivity/bluez5
+
+This recipe has two patch files located here:
+::
+
+ poky/meta/recipes-connectivity/bluez5/bluez5
+
+In the ``bluez5`` recipe, the ``SRC_URI`` statements point to the source
+and patch files needed to build the package.
+
+.. note::
+
+ In the case for the ``bluez5_5.48.bb`` recipe, the ``SRC_URI`` statements
+ are from an include file ``bluez5.inc``.
+
+As mentioned earlier, the build system treats files whose file types are
+``.patch`` and ``.diff`` as patch files. However, you can use the
+"apply=yes" parameter with the ``SRC_URI`` statement to indicate any
+file as a patch file:
+::
+
+ SRC_URI = " \
+ git://path_to_repo/some_package \
+ file://file;apply=yes \
+ "
+
+Conversely, if you have a directory full of patch files and you want to
+exclude some so that the ``do_patch`` task does not apply them during
+the patch phase, you can use the "apply=no" parameter with the
+``SRC_URI`` statement:
+::
+
+ SRC_URI = " \
+ git://path_to_repo/some_package \
+ file://path_to_lots_of_patch_files \
+ file://path_to_lots_of_patch_files/patch_file5;apply=no \
+ "
+
+In the
+previous example, assuming all the files in the directory holding the
+patch files end with either ``.patch`` or ``.diff``, every file would be
+applied as a patch by default except for the ``patch_file5`` patch.
+
+You can find out more about the patching process in the
+":ref:`overview-manual/concepts:patching`" section in
+the Yocto Project Overview and Concepts Manual and the
+":ref:`dev-manual/common-tasks:patching code`" section in the
+Yocto Project Development Tasks Manual.
+
+.. _ref-tasks-populate_lic:
+
+``do_populate_lic``
+-------------------
+
+Writes license information for the recipe that is collected later when
+the image is constructed.
+
+.. _ref-tasks-populate_sdk:
+
+``do_populate_sdk``
+-------------------
+
+Creates the file and directory structure for an installable SDK. See the
+":ref:`overview-manual/concepts:sdk generation`"
+section in the Yocto Project Overview and Concepts Manual for more
+information.
+
+.. _ref-tasks-populate_sdk_ext:
+
+``do_populate_sdk_ext``
+-----------------------
+
+Creates the file and directory structure for an installable extensible
+SDK (eSDK). See the ":ref:`overview-manual/concepts:sdk generation`"
+section in the Yocto Project Overview and Concepts Manual for more
+information.
+
+
+.. _ref-tasks-populate_sysroot:
+
+``do_populate_sysroot``
+-----------------------
+
+Stages (copies) a subset of the files installed by the
+:ref:`ref-tasks-install` task into the appropriate
+sysroot. For information on how to access these files from other
+recipes, see the :term:`STAGING_DIR* <STAGING_DIR_HOST>` variables.
+Directories that would typically not be needed by other recipes at build
+time (e.g. ``/etc``) are not copied by default.
+
+For information on what directories are copied by default, see the
+:term:`SYSROOT_DIRS* <SYSROOT_DIRS>` variables. You can change
+these variables inside your recipe if you need to make additional (or
+fewer) directories available to other recipes at build time.
+
+The ``do_populate_sysroot`` task is a shared state (sstate) task, which
+means that the task can be accelerated through sstate use. Realize also
+that if the task is re-executed, any previous output is removed (i.e.
+"cleaned").
+
+.. _ref-tasks-prepare_recipe_sysroot:
+
+``do_prepare_recipe_sysroot``
+-----------------------------
+
+Installs the files into the individual recipe specific sysroots (i.e.
+``recipe-sysroot`` and ``recipe-sysroot-native`` under
+``${``\ :term:`WORKDIR`\ ``}`` based upon the
+dependencies specified by :term:`DEPENDS`). See the
+":ref:`staging <ref-classes-staging>`" class for more information.
+
+.. _ref-tasks-rm_work:
+
+``do_rm_work``
+--------------
+
+Removes work files after the OpenEmbedded build system has finished with
+them. You can learn more by looking at the
+":ref:`rm_work.bbclass <ref-classes-rm-work>`" section.
+
+.. _ref-tasks-unpack:
+
+``do_unpack``
+-------------
+
+Unpacks the source code into a working directory pointed to by
+``${``\ :term:`WORKDIR`\ ``}``. The :term:`S`
+variable also plays a role in where unpacked source files ultimately
+reside. For more information on how source files are unpacked, see the
+":ref:`overview-manual/concepts:source fetching`"
+section in the Yocto Project Overview and Concepts Manual and also see
+the ``WORKDIR`` and ``S`` variable descriptions.
+
+Manually Called Tasks
+=====================
+
+These tasks are typically manually triggered (e.g. by using the
+``bitbake -c`` command-line option):
+
+.. _ref-tasks-checkpkg:
+
+``do_checkpkg``
+---------------
+
+Provides information about the recipe including its upstream version and
+status. The upstream version and status reveals whether or not a version
+of the recipe exists upstream and a status of not updated, updated, or
+unknown.
+
+To check the upstream version and status of a recipe, use the following
+devtool commands:
+::
+
+ $ devtool latest-version
+ $ devtool check-upgrade-status
+
+See the ":ref:`ref-manual/devtool-reference:\`\`devtool\`\` quick reference`"
+chapter for more information on
+``devtool``. See the ":ref:`devtool-checking-on-the-upgrade-status-of-a-recipe`"
+section for information on checking the upgrade status of a recipe.
+
+To build the ``checkpkg`` task, use the ``bitbake`` command with the
+"-c" option and task name:
+::
+
+ $ bitbake core-image-minimal -c checkpkg
+
+By default, the results are stored in :term:`$LOG_DIR <LOG_DIR>` (e.g.
+``$BUILD_DIR/tmp/log``).
+
+.. _ref-tasks-checkuri:
+
+``do_checkuri``
+---------------
+
+Validates the :term:`SRC_URI` value.
+
+.. _ref-tasks-clean:
+
+``do_clean``
+------------
+
+Removes all output files for a target from the
+:ref:`ref-tasks-unpack` task forward (i.e. ``do_unpack``,
+:ref:`ref-tasks-configure`,
+:ref:`ref-tasks-compile`,
+:ref:`ref-tasks-install`, and
+:ref:`ref-tasks-package`).
+
+You can run this task using BitBake as follows:
+::
+
+ $ bitbake -c clean recipe
+
+Running this task does not remove the
+:ref:`sstate <overview-manual/concepts:shared state cache>` cache files.
+Consequently, if no changes have been made and the recipe is rebuilt
+after cleaning, output files are simply restored from the sstate cache.
+If you want to remove the sstate cache files for the recipe, you need to
+use the :ref:`ref-tasks-cleansstate` task instead
+(i.e. ``bitbake -c cleansstate`` recipe).
+
+.. _ref-tasks-cleanall:
+
+``do_cleanall``
+---------------
+
+Removes all output files, shared state
+(:ref:`sstate <overview-manual/concepts:shared state cache>`) cache, and
+downloaded source files for a target (i.e. the contents of
+:term:`DL_DIR`). Essentially, the ``do_cleanall`` task is
+identical to the :ref:`ref-tasks-cleansstate` task
+with the added removal of downloaded source files.
+
+You can run this task using BitBake as follows:
+::
+
+ $ bitbake -c cleanall recipe
+
+Typically, you would not normally use the ``cleanall`` task. Do so only
+if you want to start fresh with the :ref:`ref-tasks-fetch`
+task.
+
+.. _ref-tasks-cleansstate:
+
+``do_cleansstate``
+------------------
+
+Removes all output files and shared state
+(:ref:`sstate <overview-manual/concepts:shared state cache>`) cache for a
+target. Essentially, the ``do_cleansstate`` task is identical to the
+:ref:`ref-tasks-clean` task with the added removal of
+shared state (:ref:`sstate <overview-manual/concepts:shared state cache>`)
+cache.
+
+You can run this task using BitBake as follows:
+::
+
+ $ bitbake -c cleansstate recipe
+
+When you run the ``do_cleansstate`` task, the OpenEmbedded build system
+no longer uses any sstate. Consequently, building the recipe from
+scratch is guaranteed.
+
+.. note::
+
+ The ``do_cleansstate`` task cannot remove sstate from a remote sstate
+ mirror. If you need to build a target from scratch using remote mirrors, use
+ the "-f" option as follows:
+ ::
+
+ $ bitbake -f -c do_cleansstate target
+
+
+.. _ref-tasks-devpyshell:
+
+``do_devpyshell``
+-----------------
+
+Starts a shell in which an interactive Python interpreter allows you to
+interact with the BitBake build environment. From within this shell, you
+can directly examine and set bits from the data store and execute
+functions as if within the BitBake environment. See the ":ref:`dev-manual/common-tasks:using a development python shell`" section in
+the Yocto Project Development Tasks Manual for more information about
+using ``devpyshell``.
+
+.. _ref-tasks-devshell:
+
+``do_devshell``
+---------------
+
+Starts a shell whose environment is set up for development, debugging,
+or both. See the ":ref:`dev-manual/common-tasks:using a development shell`" section in the
+Yocto Project Development Tasks Manual for more information about using
+``devshell``.
+
+.. _ref-tasks-listtasks:
+
+``do_listtasks``
+----------------
+
+Lists all defined tasks for a target.
+
+.. _ref-tasks-package_index:
+
+``do_package_index``
+--------------------
+
+Creates or updates the index in the :ref:`overview-manual/concepts:package feeds` area.
+
+.. note::
+
+ This task is not triggered with the ``bitbake -c`` command-line option as
+ are the other tasks in this section. Because this task is specifically for
+ the ``package-index`` recipe, you run it using ``bitbake package-index``.
+
+Image-Related Tasks
+===================
+
+The following tasks are applicable to image recipes.
+
+.. _ref-tasks-bootimg:
+
+``do_bootimg``
+--------------
+
+Creates a bootable live image. See the
+:term:`IMAGE_FSTYPES` variable for additional
+information on live image types.
+
+.. _ref-tasks-bundle_initramfs:
+
+``do_bundle_initramfs``
+-----------------------
+
+Combines an initial RAM disk (initramfs) image and kernel together to
+form a single image. The
+:term:`CONFIG_INITRAMFS_SOURCE` variable
+has some more information about these types of images.
+
+.. _ref-tasks-rootfs:
+
+``do_rootfs``
+-------------
+
+Creates the root filesystem (file and directory structure) for an image.
+See the ":ref:`overview-manual/concepts:image generation`"
+section in the Yocto Project Overview and Concepts Manual for more
+information on how the root filesystem is created.
+
+.. _ref-tasks-testimage:
+
+``do_testimage``
+----------------
+
+Boots an image and performs runtime tests within the image. For
+information on automatically testing images, see the
+":ref:`dev-manual/common-tasks:performing automated runtime testing`"
+section in the Yocto Project Development Tasks Manual.
+
+.. _ref-tasks-testimage_auto:
+
+``do_testimage_auto``
+---------------------
+
+Boots an image and performs runtime tests within the image immediately
+after it has been built. This task is enabled when you set
+:term:`TESTIMAGE_AUTO` equal to "1".
+
+For information on automatically testing images, see the
+":ref:`dev-manual/common-tasks:performing automated runtime testing`"
+section in the Yocto Project Development Tasks Manual.
+
+Kernel-Related Tasks
+====================
+
+The following tasks are applicable to kernel recipes. Some of these
+tasks (e.g. the :ref:`ref-tasks-menuconfig` task) are
+also applicable to recipes that use Linux kernel style configuration
+such as the BusyBox recipe.
+
+.. _ref-tasks-compile_kernelmodules:
+
+``do_compile_kernelmodules``
+----------------------------
+
+Runs the step that builds the kernel modules (if needed). Building a
+kernel consists of two steps: 1) the kernel (``vmlinux``) is built, and
+2) the modules are built (i.e. ``make modules``).
+
+.. _ref-tasks-diffconfig:
+
+``do_diffconfig``
+-----------------
+
+When invoked by the user, this task creates a file containing the
+differences between the original config as produced by
+:ref:`ref-tasks-kernel_configme` task and the
+changes made by the user with other methods (i.e. using
+(:ref:`ref-tasks-kernel_menuconfig`). Once the
+file of differences is created, it can be used to create a config
+fragment that only contains the differences. You can invoke this task
+from the command line as follows:
+::
+
+ $ bitbake linux-yocto -c diffconfig
+
+For more information, see the
+":ref:`kernel-dev/common:creating configuration fragments`"
+section in the Yocto Project Linux Kernel Development Manual.
+
+.. _ref-tasks-kernel_checkout:
+
+``do_kernel_checkout``
+----------------------
+
+Converts the newly unpacked kernel source into a form with which the
+OpenEmbedded build system can work. Because the kernel source can be
+fetched in several different ways, the ``do_kernel_checkout`` task makes
+sure that subsequent tasks are given a clean working tree copy of the
+kernel with the correct branches checked out.
+
+.. _ref-tasks-kernel_configcheck:
+
+``do_kernel_configcheck``
+-------------------------
+
+Validates the configuration produced by the
+:ref:`ref-tasks-kernel_menuconfig` task. The
+``do_kernel_configcheck`` task produces warnings when a requested
+configuration does not appear in the final ``.config`` file or when you
+override a policy configuration in a hardware configuration fragment.
+You can run this task explicitly and view the output by using the
+following command:
+::
+
+ $ bitbake linux-yocto -c kernel_configcheck -f
+
+For more information, see the
+":ref:`kernel-dev/common:validating configuration`"
+section in the Yocto Project Linux Kernel Development Manual.
+
+.. _ref-tasks-kernel_configme:
+
+``do_kernel_configme``
+----------------------
+
+After the kernel is patched by the :ref:`ref-tasks-patch`
+task, the ``do_kernel_configme`` task assembles and merges all the
+kernel config fragments into a merged configuration that can then be
+passed to the kernel configuration phase proper. This is also the time
+during which user-specified defconfigs are applied if present, and where
+configuration modes such as ``--allnoconfig`` are applied.
+
+.. _ref-tasks-kernel_menuconfig:
+
+``do_kernel_menuconfig``
+------------------------
+
+Invoked by the user to manipulate the ``.config`` file used to build a
+linux-yocto recipe. This task starts the Linux kernel configuration
+tool, which you then use to modify the kernel configuration.
+
+.. note::
+
+ You can also invoke this tool from the command line as follows:
+ ::
+
+ $ bitbake linux-yocto -c menuconfig
+
+
+See the ":ref:`kernel-dev/common:using \`\`menuconfig\`\``"
+section in the Yocto Project Linux Kernel Development Manual for more
+information on this configuration tool.
+
+.. _ref-tasks-kernel_metadata:
+
+``do_kernel_metadata``
+----------------------
+
+Collects all the features required for a given kernel build, whether the
+features come from :term:`SRC_URI` or from Git
+repositories. After collection, the ``do_kernel_metadata`` task
+processes the features into a series of config fragments and patches,
+which can then be applied by subsequent tasks such as
+:ref:`ref-tasks-patch` and
+:ref:`ref-tasks-kernel_configme`.
+
+.. _ref-tasks-menuconfig:
+
+``do_menuconfig``
+-----------------
+
+Runs ``make menuconfig`` for the kernel. For information on
+``menuconfig``, see the
+":ref:`kernel-dev/common:using \`\`menuconfig\`\``"
+section in the Yocto Project Linux Kernel Development Manual.
+
+.. _ref-tasks-savedefconfig:
+
+``do_savedefconfig``
+--------------------
+
+When invoked by the user, creates a defconfig file that can be used
+instead of the default defconfig. The saved defconfig contains the
+differences between the default defconfig and the changes made by the
+user using other methods (i.e. the
+:ref:`ref-tasks-kernel_menuconfig` task. You
+can invoke the task using the following command:
+::
+
+ $ bitbake linux-yocto -c savedefconfig
+
+.. _ref-tasks-shared_workdir:
+
+``do_shared_workdir``
+---------------------
+
+After the kernel has been compiled but before the kernel modules have
+been compiled, this task copies files required for module builds and
+which are generated from the kernel build into the shared work
+directory. With these copies successfully copied, the
+:ref:`ref-tasks-compile_kernelmodules` task
+can successfully build the kernel modules in the next step of the build.
+
+.. _ref-tasks-sizecheck:
+
+``do_sizecheck``
+----------------
+
+After the kernel has been built, this task checks the size of the
+stripped kernel image against
+:term:`KERNEL_IMAGE_MAXSIZE`. If that
+variable was set and the size of the stripped kernel exceeds that size,
+the kernel build produces a warning to that effect.
+
+.. _ref-tasks-strip:
+
+``do_strip``
+------------
+
+If ``KERNEL_IMAGE_STRIP_EXTRA_SECTIONS`` is defined, this task strips
+the sections named in that variable from ``vmlinux``. This stripping is
+typically used to remove nonessential sections such as ``.comment``
+sections from a size-sensitive configuration.
+
+.. _ref-tasks-validate_branches:
+
+``do_validate_branches``
+------------------------
+
+After the kernel is unpacked but before it is patched, this task makes
+sure that the machine and metadata branches as specified by the
+:term:`SRCREV` variables actually exist on the specified
+branches. If these branches do not exist and
+:term:`AUTOREV` is not being used, the
+``do_validate_branches`` task fails during the build.