diff --git a/poky/documentation/ref-manual/terms.rst b/poky/documentation/ref-manual/terms.rst
new file mode 100644
index 0000000..c07dd4b
--- /dev/null
+++ b/poky/documentation/ref-manual/terms.rst
@@ -0,0 +1,390 @@
+.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
+
+*******************
+Yocto Project Terms
+*******************
+
+Following is a list of terms and definitions users new to the Yocto Project
+development environment might find helpful. While some of these terms are
+universal, the list includes them just in case:
+
+.. glossary::
+
+   :term:`Append Files`
+      Files that append build information to a recipe file.  Append files are
+      known as BitBake append files and ``.bbappend`` files. The OpenEmbedded
+      build system expects every append file to have a corresponding recipe
+      (``.bb``) file. Furthermore, the append file and corresponding recipe file
+      must use the same root filename.  The filenames can differ only in the
+      file type suffix used (e.g. ``formfactor_0.0.bb`` and
+      ``formfactor_0.0.bbappend``).
+
+      Information in append files extends or overrides the information in the
+      similarly-named recipe file. For an example of an append file in use, see
+      the ":ref:`dev-manual/common-tasks:Using .bbappend Files in
+      Your Layer`" section in the Yocto Project Development Tasks Manual.
+
+      When you name an append file, you can use the "``%``" wildcard character
+      to allow for matching recipe names. For example, suppose you have an
+      append file named as follows:
+      ::
+      
+         busybox_1.21.%.bbappend
+
+      That append file
+      would match any ``busybox_1.21.``\ x\ ``.bb`` version of the recipe. So,
+      the append file would match any of the following recipe names:
+
+      .. code-block:: shell
+
+         busybox_1.21.1.bb
+         busybox_1.21.2.bb
+         busybox_1.21.3.bb
+         busybox_1.21.10.bb
+         busybox_1.21.25.bb
+
+      .. note::
+
+         The use of the "%" character is limited in that it only works
+         directly in front of the .bbappend portion of the append file's
+         name. You cannot use the wildcard character in any other location of
+         the name.
+
+   :term:`BitBake`
+      The task executor and scheduler used by the OpenEmbedded build system to
+      build images. For more information on BitBake, see the :doc:`BitBake User
+      Manual <bitbake:index>`.
+
+   :term:`Board Support Package (BSP)`
+      A group of drivers, definitions, and other components that provide support
+      for a specific hardware configuration. For more information on BSPs, see
+      the :doc:`/bsp-guide/index`.
+
+   :term:`Build Directory`
+      This term refers to the area used by the OpenEmbedded build system for
+      builds. The area is created when you ``source`` the setup environment
+      script that is found in the Source Directory
+      (i.e. :ref:`ref-manual/structure:\`\`oe-init-build-env\`\``). The
+      :term:`TOPDIR` variable points to the Build Directory.
+
+      You have a lot of flexibility when creating the Build Directory.
+      Following are some examples that show how to create the directory.  The
+      examples assume your :term:`Source Directory` is named ``poky``:
+
+         -  Create the Build Directory inside your Source Directory and let
+            the name of the Build Directory default to ``build``:
+
+            .. code-block:: shell
+
+               $ cd $HOME/poky
+               $ source oe-init-build-env
+
+         -  Create the Build Directory inside your home directory and
+            specifically name it ``test-builds``:
+
+            .. code-block:: shell
+
+               $ cd $HOME
+               $ source poky/oe-init-build-env test-builds
+
+         -  Provide a directory path and specifically name the Build
+            Directory. Any intermediate folders in the pathname must exist.
+            This next example creates a Build Directory named
+            ``YP-POKYVERSION`` in your home directory within the existing
+            directory ``mybuilds``:
+
+            .. code-block:: shell
+
+               $ cd $HOME
+               $ source $HOME/poky/oe-init-build-env $HOME/mybuilds/YP-POKYVERSION
+
+      .. note::
+
+         By default, the Build Directory contains :term:`TMPDIR`, which is a
+         temporary directory the build system uses for its work. ``TMPDIR`` cannot
+         be under NFS. Thus, by default, the Build Directory cannot be under
+         NFS. However, if you need the Build Directory to be under NFS, you can
+         set this up by setting ``TMPDIR`` in your ``local.conf`` file to use a local
+         drive. Doing so effectively separates ``TMPDIR`` from :term:`TOPDIR`, which is the
+         Build Directory.
+
+   :term:`Build Host`
+      The system used to build images in a Yocto Project Development
+      environment. The build system is sometimes referred to as the development
+      host.
+
+   :term:`Classes`
+      Files that provide for logic encapsulation and inheritance so that
+      commonly used patterns can be defined once and then easily used in
+      multiple recipes. For reference information on the Yocto Project classes,
+      see the ":ref:`ref-manual/classes:Classes`" chapter. Class files end with the
+      ``.bbclass`` filename extension.
+
+   :term:`Configuration File`
+      Files that hold global definitions of variables, user-defined variables,
+      and hardware configuration information. These files tell the OpenEmbedded
+      build system what to build and what to put into the image to support a
+      particular platform.
+
+      Configuration files end with a ``.conf`` filename extension. The
+      :file:`conf/local.conf` configuration file in the :term:`Build Directory`
+      contains user-defined variables that affect every build. The
+      :file:`meta-poky/conf/distro/poky.conf` configuration file defines Yocto
+      "distro" configuration variables used only when building with this
+      policy. Machine configuration files, which are located throughout the
+      :term:`Source Directory`, define variables for specific hardware and are
+      only used when building for that target (e.g. the
+      :file:`machine/beaglebone.conf` configuration file defines variables for
+      the Texas Instruments ARM Cortex-A8 development board).
+
+   :term:`Container Layer`
+      Layers that hold other layers. An example of a container layer is
+      OpenEmbedded's `meta-openembedded
+      <https://github.com/openembedded/meta-openembedded>`_ layer. The
+      ``meta-openembedded`` layer contains many ``meta-*`` layers.
+
+   :term:`Cross-Development Toolchain`
+      In general, a cross-development toolchain is a collection of software
+      development tools and utilities that run on one architecture and allow you
+      to develop software for a different, or targeted, architecture. These
+      toolchains contain cross-compilers, linkers, and debuggers that are
+      specific to the target architecture.
+
+      The Yocto Project supports two different cross-development toolchains:
+
+      - A toolchain only used by and within BitBake when building an image for a
+        target architecture.
+
+      - A relocatable toolchain used outside of BitBake by developers when
+        developing applications that will run on a targeted device.
+
+      Creation of these toolchains is simple and automated. For information on
+      toolchain concepts as they apply to the Yocto Project, see the
+      ":ref:`overview-manual/concepts:Cross-Development
+      Toolchain Generation`" section in the Yocto Project Overview and Concepts
+      Manual. You can also find more information on using the relocatable
+      toolchain in the :doc:`/sdk-manual/index` manual.
+
+   :term:`Extensible Software Development Kit (eSDK)`
+      A custom SDK for application developers. This eSDK allows developers to
+      incorporate their library and programming changes back into the image to
+      make their code available to other application developers.
+
+      For information on the eSDK, see the :doc:`/sdk-manual/index` manual.
+
+   :term:`Image`
+      An image is an artifact of the BitBake build process given a collection of
+      recipes and related Metadata. Images are the binary output that run on
+      specific hardware or QEMU and are used for specific use-cases. For a list
+      of the supported image types that the Yocto Project provides, see the
+      ":ref:`ref-manual/images:Images`" chapter.
+
+   :term:`Layer`
+      A collection of related recipes. Layers allow you to consolidate related
+      metadata to customize your build. Layers also isolate information used
+      when building for multiple architectures.  Layers are hierarchical in
+      their ability to override previous specifications. You can include any
+      number of available layers from the Yocto Project and customize the build
+      by adding your layers after them. You can search the Layer Index for
+      layers used within Yocto Project.
+
+      For introductory information on layers, see the
+      ":ref:`overview-manual/yp-intro:The Yocto Project Layer
+      Model`" section in the Yocto Project Overview and Concepts Manual. For
+      more detailed information on layers, see the
+      ":ref:`dev-manual/common-tasks:Understanding and Creating
+      Layers`" section in the Yocto Project Development Tasks Manual. For a
+      discussion specifically on BSP Layers, see the ":ref:`bsp-guide/bsp:BSP
+      Layers`" section in the Yocto Project Board Support Packages (BSP)
+      Developer's Guide.
+
+   :term:`Metadata`
+      A key element of the Yocto Project is the Metadata that
+      is used to construct a Linux distribution and is contained in the
+      files that the :term:`OpenEmbedded Build System`
+      parses when building an image. In general, Metadata includes recipes,
+      configuration files, and other information that refers to the build
+      instructions themselves, as well as the data used to control what
+      things get built and the effects of the build. Metadata also includes
+      commands and data used to indicate what versions of software are
+      used, from where they are obtained, and changes or additions to the
+      software itself (patches or auxiliary files) that are used to fix
+      bugs or customize the software for use in a particular situation.
+      OpenEmbedded-Core is an important set of validated metadata.
+
+      In the context of the kernel ("kernel Metadata"), the term refers to
+      the kernel config fragments and features contained in the
+      :yocto_git:`yocto-kernel-cache </yocto-kernel-cache>`
+      Git repository.
+
+   :term:`OpenEmbedded-Core (OE-Core)`
+      OE-Core is metadata comprised of
+      foundational recipes, classes, and associated files that are meant to
+      be common among many different OpenEmbedded-derived systems,
+      including the Yocto Project. OE-Core is a curated subset of an
+      original repository developed by the OpenEmbedded community that has
+      been pared down into a smaller, core set of continuously validated
+      recipes. The result is a tightly controlled and an quality-assured
+      core set of recipes.
+
+      You can see the Metadata in the ``meta`` directory of the Yocto
+      Project :yocto_git:`Source Repositories </poky>`.
+
+   :term:`OpenEmbedded Build System`
+      The build system specific to the Yocto
+      Project. The OpenEmbedded build system is based on another project
+      known as "Poky", which uses :term:`BitBake` as the task
+      executor. Throughout the Yocto Project documentation set, the
+      OpenEmbedded build system is sometimes referred to simply as "the
+      build system". If other build systems, such as a host or target build
+      system are referenced, the documentation clearly states the
+      difference.
+
+      .. note::
+
+         For some historical information about Poky, see the :term:`Poky` term.
+
+   :term:`Package`
+      In the context of the Yocto Project, this term refers to a
+      recipe's packaged output produced by BitBake (i.e. a "baked recipe").
+      A package is generally the compiled binaries produced from the
+      recipe's sources. You "bake" something by running it through BitBake.
+
+      It is worth noting that the term "package" can, in general, have
+      subtle meanings. For example, the packages referred to in the
+      ":ref:`ref-manual/system-requirements:required packages for the build host`"
+      section are compiled binaries that, when installed, add functionality to
+      your Linux distribution.
+
+      Another point worth noting is that historically within the Yocto
+      Project, recipes were referred to as packages - thus, the existence
+      of several BitBake variables that are seemingly mis-named, (e.g.
+      :term:`PR`, :term:`PV`, and
+      :term:`PE`).
+
+   :term:`Package Groups`
+      Arbitrary groups of software Recipes. You use
+      package groups to hold recipes that, when built, usually accomplish a
+      single task. For example, a package group could contain the recipes
+      for a company's proprietary or value-add software. Or, the package
+      group could contain the recipes that enable graphics. A package group
+      is really just another recipe. Because package group files are
+      recipes, they end with the ``.bb`` filename extension.
+
+   :term:`Poky`
+      Poky, which is pronounced *Pock*-ee, is a reference embedded
+      distribution and a reference test configuration. Poky provides the
+      following:
+
+      -  A base-level functional distro used to illustrate how to customize
+         a distribution.
+
+      -  A means by which to test the Yocto Project components (i.e. Poky
+         is used to validate the Yocto Project).
+
+      -  A vehicle through which you can download the Yocto Project.
+
+      Poky is not a product level distro. Rather, it is a good starting
+      point for customization.
+
+      .. note::
+
+         Poky began as an open-source project initially developed by
+         OpenedHand. OpenedHand developed Poky from the existing
+         OpenEmbedded build system to create a commercially supportable
+         build system for embedded Linux. After Intel Corporation acquired
+         OpenedHand, the poky project became the basis for the Yocto
+         Project's build system.
+
+   :term:`Recipe`
+      A set of instructions for building packages. A recipe
+      describes where you get source code, which patches to apply, how to
+      configure the source, how to compile it and so on. Recipes also
+      describe dependencies for libraries or for other recipes. Recipes
+      represent the logical unit of execution, the software to build, the
+      images to build, and use the ``.bb`` file extension.
+
+   :term:`Reference Kit`
+      A working example of a system, which includes a
+      :term:`BSP<Board Support Package (BSP)>` as well as a
+      :term:`build host<Build Host>` and other components, that can
+      work on specific hardware.
+
+   :term:`Source Directory`
+     This term refers to the directory structure
+     created as a result of creating a local copy of the ``poky`` Git
+     repository ``git://git.yoctoproject.org/poky`` or expanding a
+     released ``poky`` tarball.
+
+     .. note::
+
+        Creating a local copy of the
+        poky
+        Git repository is the recommended method for setting up your
+        Source Directory.
+
+     Sometimes you might hear the term "poky directory" used to refer to
+     this directory structure.
+
+     .. note::
+
+        The OpenEmbedded build system does not support file or directory
+        names that contain spaces. Be sure that the Source Directory you
+        use does not contain these types of names.
+
+     The Source Directory contains BitBake, Documentation, Metadata and
+     other files that all support the Yocto Project. Consequently, you
+     must have the Source Directory in place on your development system in
+     order to do any development using the Yocto Project.
+
+     When you create a local copy of the Git repository, you can name the
+     repository anything you like. Throughout much of the documentation,
+     "poky" is used as the name of the top-level folder of the local copy
+     of the poky Git repository. So, for example, cloning the ``poky`` Git
+     repository results in a local Git repository whose top-level folder
+     is also named "poky".
+
+     While it is not recommended that you use tarball expansion to set up
+     the Source Directory, if you do, the top-level directory name of the
+     Source Directory is derived from the Yocto Project release tarball.
+     For example, downloading and unpacking
+     :yocto_dl:`/releases/yocto/&DISTRO_REL_TAG;/&YOCTO_POKY;.tar.bz2`
+     results in a Source Directory whose root folder is named ``poky``.
+
+     It is important to understand the differences between the Source
+     Directory created by unpacking a released tarball as compared to
+     cloning ``git://git.yoctoproject.org/poky``. When you unpack a
+     tarball, you have an exact copy of the files based on the time of
+     release - a fixed release point. Any changes you make to your local
+     files in the Source Directory are on top of the release and will
+     remain local only. On the other hand, when you clone the ``poky`` Git
+     repository, you have an active development repository with access to
+     the upstream repository's branches and tags. In this case, any local
+     changes you make to the local Source Directory can be later applied
+     to active development branches of the upstream ``poky`` Git
+     repository.
+
+     For more information on concepts related to Git repositories,
+     branches, and tags, see the
+     ":ref:`overview-manual/development-environment:repositories, tags, and branches`"
+     section in the Yocto Project Overview and Concepts Manual.
+
+   :term:`Task`
+      A unit of execution for BitBake (e.g.
+      :ref:`ref-tasks-compile`,
+      :ref:`ref-tasks-fetch`,
+      :ref:`ref-tasks-patch`, and so forth).
+
+   :term:`Toaster`
+      A web interface to the Yocto Project's :term:`OpenEmbedded Build System`.
+      The interface enables you to
+      configure and run your builds. Information about builds is collected
+      and stored in a database. For information on Toaster, see the
+      :doc:`/toaster-manual/index`.
+
+   :term:`Upstream`
+      A reference to source code or repositories that are not
+      local to the development system but located in a master area that is
+      controlled by the maintainer of the source code. For example, in
+      order for a developer to work on a particular piece of code, they
+      need to first get a copy of it from an "upstream" source.