reset upstream subtrees to HEAD
Reset the following subtrees on HEAD:
poky: 8217b477a1(master)
meta-xilinx: 64aa3d35ae(master)
meta-openembedded: 0435c9e193(master)
meta-raspberrypi: 490a4441ac(master)
meta-security: cb6d1c85ee(master)
Squashed patches:
meta-phosphor: drop systemd 239 patches
meta-phosphor: mrw-api: use correct install path
Change-Id: I268e2646d9174ad305630c6bbd3fbc1a6105f43d
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.xml b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.xml
index a84b2bc..aca6741 100644
--- a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.xml
+++ b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.xml
@@ -3,7 +3,7 @@
[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >
<!-- Dummy chapter -->
-<chapter id='ref-variables-glos'>
+<chapter id='ref-bb-variables-glos'>
<title>Variables Glossary</title>
@@ -34,29 +34,29 @@
</itemizedlist>
</note>
-<glossary id='ref-variables-glossary'>
+<glossary id='ref-bb-variables-glossary'>
<para>
- <link linkend='var-ASSUME_PROVIDED'>A</link>
- <link linkend='var-B'>B</link>
- <link linkend='var-CACHE'>C</link>
- <link linkend='var-DEFAULT_PREFERENCE'>D</link>
- <link linkend='var-EXCLUDE_FROM_WORLD'>E</link>
- <link linkend='var-FAKEROOT'>F</link>
- <link linkend='var-GITDIR'>G</link>
- <link linkend='var-HGDIR'>H</link>
-<!-- <link linkend='var-ICECC_DISABLED'>I</link> -->
+ <link linkend='var-bb-ASSUME_PROVIDED'>A</link>
+ <link linkend='var-bb-B'>B</link>
+ <link linkend='var-bb-CACHE'>C</link>
+ <link linkend='var-bb-DEFAULT_PREFERENCE'>D</link>
+ <link linkend='var-bb-EXCLUDE_FROM_WORLD'>E</link>
+ <link linkend='var-bb-FAKEROOT'>F</link>
+ <link linkend='var-bb-GITDIR'>G</link>
+ <link linkend='var-bb-HGDIR'>H</link>
+ <link linkend='var-bb-INHERIT'>I</link>
<!-- <link linkend='var-glossary-j'>J</link> -->
<!-- <link linkend='var-KARCH'>K</link> -->
- <link linkend='var-LAYERDEPENDS'>L</link>
- <link linkend='var-MIRRORS'>M</link>
+ <link linkend='var-bb-LAYERDEPENDS'>L</link>
+ <link linkend='var-bb-MIRRORS'>M</link>
<!-- <link linkend='var-glossary-n'>N</link> -->
- <link linkend='var-OVERRIDES'>O</link>
- <link linkend='var-P4DIR'>P</link>
+ <link linkend='var-bb-OVERRIDES'>O</link>
+ <link linkend='var-bb-P4DIR'>P</link>
<!-- <link linkend='var-QMAKE_PROFILES'>Q</link> -->
- <link linkend='var-RDEPENDS'>R</link>
- <link linkend='var-SECTION'>S</link>
- <link linkend='var-T'>T</link>
+ <link linkend='var-bb-RDEPENDS'>R</link>
+ <link linkend='var-bb-SECTION'>S</link>
+ <link linkend='var-bb-T'>T</link>
<!-- <link linkend='var-UBOOT_CONFIG'>U</link> -->
<!-- <link linkend='var-glossary-v'>V</link> -->
<!-- <link linkend='var-WARN_QA'>W</link> -->
@@ -65,13 +65,13 @@
<!-- <link linkend='var-glossary-z'>Z</link>-->
</para>
- <glossdiv id='var-glossary-a'><title>A</title>
+ <glossdiv id='var-bb-glossary-a'><title>A</title>
- <glossentry id='var-ASSUME_PROVIDED'><glossterm>ASSUME_PROVIDED</glossterm>
+ <glossentry id='var-bb-ASSUME_PROVIDED'><glossterm>ASSUME_PROVIDED</glossterm>
<glossdef>
<para>
Lists recipe names
- (<link linkend='var-PN'><filename>PN</filename></link>
+ (<link linkend='var-bb-PN'><filename>PN</filename></link>
values) BitBake does not attempt to build.
Instead, BitBake assumes these recipes have already been
built.
@@ -91,9 +91,9 @@
</glossdiv>
- <glossdiv id='var-glossary-b'><title>B</title>
+ <glossdiv id='var-bb-glossary-b'><title>B</title>
- <glossentry id='var-B'><glossterm>B</glossterm>
+ <glossentry id='var-bb-B'><glossterm>B</glossterm>
<glossdef>
<para>
The directory in which BitBake executes functions
@@ -102,7 +102,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_ALLOWED_NETWORKS'><glossterm>BB_ALLOWED_NETWORKS</glossterm>
+ <glossentry id='var-bb-BB_ALLOWED_NETWORKS'><glossterm>BB_ALLOWED_NETWORKS</glossterm>
<glossdef>
<para>
Specifies a space-delimited list of hosts that the fetcher
@@ -111,7 +111,7 @@
<itemizedlist>
<listitem><para>
This host list is only used if
- <link linkend='var-BB_NO_NETWORK'><filename>BB_NO_NETWORK</filename></link>
+ <link linkend='var-bb-BB_NO_NETWORK'><filename>BB_NO_NETWORK</filename></link>
is either not set or set to "0".
</para></listitem>
<listitem><para>
@@ -151,13 +151,13 @@
</itemizedlist>
Using <filename>BB_ALLOWED_NETWORKS</filename> in
conjunction with
- <link linkend='var-PREMIRRORS'><filename>PREMIRRORS</filename></link>
+ <link linkend='var-bb-PREMIRRORS'><filename>PREMIRRORS</filename></link>
is very useful.
Adding the host you want to use to
<filename>PREMIRRORS</filename> results in the source code
being fetched from an allowed location and avoids raising
an error when a host that is not allowed is in a
- <link linkend='var-SRC_URI'><filename>SRC_URI</filename></link>
+ <link linkend='var-bb-SRC_URI'><filename>SRC_URI</filename></link>
statement.
This is because the fetcher does not attempt to use the
host listed in <filename>SRC_URI</filename> after a
@@ -167,7 +167,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_CONSOLELOG'><glossterm>BB_CONSOLELOG</glossterm>
+ <glossentry id='var-bb-BB_CONSOLELOG'><glossterm>BB_CONSOLELOG</glossterm>
<glossdef>
<para>
Specifies the path to a log file into which BitBake's user
@@ -176,7 +176,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_CURRENTTASK'><glossterm>BB_CURRENTTASK</glossterm>
+ <glossentry id='var-bb-BB_CURRENTTASK'><glossterm>BB_CURRENTTASK</glossterm>
<glossdef>
<para>
Contains the name of the currently running task.
@@ -186,7 +186,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_DANGLINGAPPENDS_WARNONLY'><glossterm>BB_DANGLINGAPPENDS_WARNONLY</glossterm>
+ <glossentry id='var-bb-BB_DANGLINGAPPENDS_WARNONLY'><glossterm>BB_DANGLINGAPPENDS_WARNONLY</glossterm>
<glossdef>
<para>
Defines how BitBake handles situations where an append
@@ -208,7 +208,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_DEFAULT_TASK'><glossterm>BB_DEFAULT_TASK</glossterm>
+ <glossentry id='var-bb-BB_DEFAULT_TASK'><glossterm>BB_DEFAULT_TASK</glossterm>
<glossdef>
<para>
The default task to use when none is specified (e.g.
@@ -219,7 +219,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_DISKMON_DIRS'><glossterm>BB_DISKMON_DIRS</glossterm>
+ <glossentry id='var-bb-BB_DISKMON_DIRS'><glossterm>BB_DISKMON_DIRS</glossterm>
<glossdef>
<para>
Monitors disk space and available inodes during the build
@@ -245,7 +245,7 @@
build when a threshold is broken.
Subsequent warnings are issued as
defined by the
- <link linkend='var-BB_DISKMON_WARNINTERVAL'>BB_DISKMON_WARNINTERVAL</link> variable,
+ <link linkend='var-bb-BB_DISKMON_WARNINTERVAL'>BB_DISKMON_WARNINTERVAL</link> variable,
which must be defined.
<dir> is:
@@ -275,7 +275,7 @@
BB_DISKMON_DIRS = "ABORT,${TMPDIR},,100K"
</literallayout>
The first example works only if you also set
- the <link linkend='var-BB_DISKMON_WARNINTERVAL'><filename>BB_DISKMON_WARNINTERVAL</filename></link> variable.
+ the <link linkend='var-bb-BB_DISKMON_WARNINTERVAL'><filename>BB_DISKMON_WARNINTERVAL</filename></link> variable.
This example causes the build system to immediately
abort when either the disk space in <filename>${TMPDIR}</filename> drops
below 1 Gbyte or the available free inodes drops below
@@ -309,7 +309,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_DISKMON_WARNINTERVAL'><glossterm>BB_DISKMON_WARNINTERVAL</glossterm>
+ <glossentry id='var-bb-BB_DISKMON_WARNINTERVAL'><glossterm>BB_DISKMON_WARNINTERVAL</glossterm>
<glossdef>
<para>
Defines the disk space and free inode warning intervals.
@@ -319,7 +319,7 @@
If you are going to use the
<filename>BB_DISKMON_WARNINTERVAL</filename> variable, you must
also use the
- <link linkend='var-BB_DISKMON_DIRS'><filename>BB_DISKMON_DIRS</filename></link> variable
+ <link linkend='var-bb-BB_DISKMON_DIRS'><filename>BB_DISKMON_DIRS</filename></link> variable
and define its action as "WARN".
During the build, subsequent warnings are issued each time
disk space or number of free inodes further reduces by
@@ -374,7 +374,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_ENV_WHITELIST'><glossterm>BB_ENV_WHITELIST</glossterm>
+ <glossentry id='var-bb-BB_ENV_WHITELIST'><glossterm>BB_ENV_WHITELIST</glossterm>
<glossdef>
<para>
Specifies the internal whitelist of variables to allow
@@ -382,11 +382,11 @@
datastore.
If the value of this variable is not specified
(which is the default), the following list is used:
- <link linkend='var-BBPATH'><filename>BBPATH</filename></link>,
- <link linkend='var-BB_PRESERVE_ENV'><filename>BB_PRESERVE_ENV</filename></link>,
- <link linkend='var-BB_ENV_WHITELIST'><filename>BB_ENV_WHITELIST</filename></link>,
+ <link linkend='var-bb-BBPATH'><filename>BBPATH</filename></link>,
+ <link linkend='var-bb-BB_PRESERVE_ENV'><filename>BB_PRESERVE_ENV</filename></link>,
+ <link linkend='var-bb-BB_ENV_WHITELIST'><filename>BB_ENV_WHITELIST</filename></link>,
and
- <link linkend='var-BB_ENV_EXTRAWHITE'><filename>BB_ENV_EXTRAWHITE</filename></link>.
+ <link linkend='var-bb-BB_ENV_EXTRAWHITE'><filename>BB_ENV_EXTRAWHITE</filename></link>.
<note>
You must set this variable in the external environment
in order for it to work.
@@ -395,7 +395,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_ENV_EXTRAWHITE'><glossterm>BB_ENV_EXTRAWHITE</glossterm>
+ <glossentry id='var-bb-BB_ENV_EXTRAWHITE'><glossterm>BB_ENV_EXTRAWHITE</glossterm>
<glossdef>
<para>
Specifies an additional set of variables to allow through
@@ -403,7 +403,7 @@
datastore.
This list of variables are on top of the internal list
set in
- <link linkend='var-BB_ENV_WHITELIST'><filename>BB_ENV_WHITELIST</filename></link>.
+ <link linkend='var-bb-BB_ENV_WHITELIST'><filename>BB_ENV_WHITELIST</filename></link>.
<note>
You must set this variable in the external
environment in order for it to work.
@@ -412,22 +412,22 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_FETCH_PREMIRRORONLY'><glossterm>BB_FETCH_PREMIRRORONLY</glossterm>
+ <glossentry id='var-bb-BB_FETCH_PREMIRRORONLY'><glossterm>BB_FETCH_PREMIRRORONLY</glossterm>
<glossdef>
<para>
When set to "1", causes BitBake's fetcher module to only
search
- <link linkend='var-PREMIRRORS'><filename>PREMIRRORS</filename></link>
+ <link linkend='var-bb-PREMIRRORS'><filename>PREMIRRORS</filename></link>
for files.
BitBake will not search the main
- <link linkend='var-SRC_URI'><filename>SRC_URI</filename></link>
+ <link linkend='var-bb-SRC_URI'><filename>SRC_URI</filename></link>
or
- <link linkend='var-MIRRORS'><filename>MIRRORS</filename></link>.
+ <link linkend='var-bb-MIRRORS'><filename>MIRRORS</filename></link>.
</para>
</glossdef>
</glossentry>
- <glossentry id='var-BB_FILENAME'><glossterm>BB_FILENAME</glossterm>
+ <glossentry id='var-bb-BB_FILENAME'><glossterm>BB_FILENAME</glossterm>
<glossdef>
<para>
Contains the filename of the recipe that owns the currently
@@ -440,12 +440,12 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_GENERATE_MIRROR_TARBALLS'><glossterm>BB_GENERATE_MIRROR_TARBALLS</glossterm>
+ <glossentry id='var-bb-BB_GENERATE_MIRROR_TARBALLS'><glossterm>BB_GENERATE_MIRROR_TARBALLS</glossterm>
<glossdef>
<para>
Causes tarballs of the Git repositories, including the
Git metadata, to be placed in the
- <link linkend='var-DL_DIR'><filename>DL_DIR</filename></link>
+ <link linkend='var-bb-DL_DIR'><filename>DL_DIR</filename></link>
directory.
Anyone wishing to create a source mirror would want to
enable this variable.
@@ -461,7 +461,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_HASHCONFIG_WHITELIST'><glossterm>BB_HASHCONFIG_WHITELIST</glossterm>
+ <glossentry id='var-bb-BB_HASHCONFIG_WHITELIST'><glossterm>BB_HASHCONFIG_WHITELIST</glossterm>
<glossdef>
<para>
Lists variables that are excluded from base configuration
@@ -485,7 +485,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_HASHBASE_WHITELIST'><glossterm>BB_HASHBASE_WHITELIST</glossterm>
+ <glossentry id='var-bb-BB_HASHBASE_WHITELIST'><glossterm>BB_HASHBASE_WHITELIST</glossterm>
<glossdef>
<para>
Lists variables that are excluded from checksum and
@@ -500,7 +500,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_HASHCHECK_FUNCTION'><glossterm>BB_HASHCHECK_FUNCTION</glossterm>
+ <glossentry id='var-bb-BB_HASHCHECK_FUNCTION'><glossterm>BB_HASHCHECK_FUNCTION</glossterm>
<glossdef>
<para>
Specifies the name of the function to call during the
@@ -524,7 +524,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_INVALIDCONF'><glossterm>BB_INVALIDCONF</glossterm>
+ <glossentry id='var-bb-BB_INVALIDCONF'><glossterm>BB_INVALIDCONF</glossterm>
<glossdef>
<para>
Used in combination with the
@@ -539,11 +539,11 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_LOGFMT'><glossterm>BB_LOGFMT</glossterm>
+ <glossentry id='var-bb-BB_LOGFMT'><glossterm>BB_LOGFMT</glossterm>
<glossdef>
<para>
Specifies the name of the log files saved into
- <filename>${</filename><link linkend='var-T'><filename>T</filename></link><filename>}</filename>.
+ <filename>${</filename><link linkend='var-bb-T'><filename>T</filename></link><filename>}</filename>.
By default, the <filename>BB_LOGFMT</filename> variable
is undefined and the log file names get created using the
following form:
@@ -556,7 +556,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_NICE_LEVEL'><glossterm>BB_NICE_LEVEL</glossterm>
+ <glossentry id='var-bb-BB_NICE_LEVEL'><glossterm>BB_NICE_LEVEL</glossterm>
<glossdef>
<para>
Allows BitBake to run at a specific priority
@@ -564,13 +564,13 @@
System permissions usually mean that BitBake can reduce its
priority but not raise it again.
See
- <link linkend='var-BB_TASK_NICE_LEVEL'><filename>BB_TASK_NICE_LEVEL</filename></link>
+ <link linkend='var-bb-BB_TASK_NICE_LEVEL'><filename>BB_TASK_NICE_LEVEL</filename></link>
for additional information.
</para>
</glossdef>
</glossentry>
- <glossentry id='var-BB_NO_NETWORK'><glossterm>BB_NO_NETWORK</glossterm>
+ <glossentry id='var-bb-BB_NO_NETWORK'><glossterm>BB_NO_NETWORK</glossterm>
<glossdef>
<para>
Disables network access in the BitBake fetcher modules.
@@ -587,7 +587,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_NUMBER_THREADS'><glossterm>BB_NUMBER_THREADS</glossterm>
+ <glossentry id='var-bb-BB_NUMBER_THREADS'><glossterm>BB_NUMBER_THREADS</glossterm>
<glossdef>
<para>
The maximum number of tasks BitBake should run in parallel
@@ -599,7 +599,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_NUMBER_PARSE_THREADS'><glossterm>BB_NUMBER_PARSE_THREADS</glossterm>
+ <glossentry id='var-bb-BB_NUMBER_PARSE_THREADS'><glossterm>BB_NUMBER_PARSE_THREADS</glossterm>
<glossdef>
<para>
Sets the number of threads BitBake uses when parsing.
@@ -609,7 +609,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_ORIGENV'><glossterm>BB_ORIGENV</glossterm>
+ <glossentry id='var-bb-BB_ORIGENV'><glossterm>BB_ORIGENV</glossterm>
<glossdef>
<para>
Contains a copy of the original external environment in
@@ -625,7 +625,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_PRESERVE_ENV'><glossterm>BB_PRESERVE_ENV</glossterm>
+ <glossentry id='var-bb-BB_PRESERVE_ENV'><glossterm>BB_PRESERVE_ENV</glossterm>
<glossdef>
<para>
Disables whitelisting and instead allows all variables
@@ -639,12 +639,12 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_RUNFMT'><glossterm>BB_RUNFMT</glossterm>
+ <glossentry id='var-bb-BB_RUNFMT'><glossterm>BB_RUNFMT</glossterm>
<glossdef>
<para>
Specifies the name of the executable script files
(i.e. run files) saved into
- <filename>${</filename><link linkend='var-T'><filename>T</filename></link><filename>}</filename>.
+ <filename>${</filename><link linkend='var-bb-T'><filename>T</filename></link><filename>}</filename>.
By default, the <filename>BB_RUNFMT</filename> variable
is undefined and the run file names get created using the
following form:
@@ -657,7 +657,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_RUNTASK'><glossterm>BB_RUNTASK</glossterm>
+ <glossentry id='var-bb-BB_RUNTASK'><glossterm>BB_RUNTASK</glossterm>
<glossdef>
<para>
Contains the name of the currently executing task.
@@ -669,7 +669,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_SCHEDULER'><glossterm>BB_SCHEDULER</glossterm>
+ <glossentry id='var-bb-BB_SCHEDULER'><glossterm>BB_SCHEDULER</glossterm>
<glossdef>
<para>
Selects the name of the scheduler to use for the
@@ -695,7 +695,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_SCHEDULERS'><glossterm>BB_SCHEDULERS</glossterm>
+ <glossentry id='var-bb-BB_SCHEDULERS'><glossterm>BB_SCHEDULERS</glossterm>
<glossdef>
<para>
Defines custom schedulers to import.
@@ -705,13 +705,13 @@
<para>
For information how to select a scheduler, see the
- <link linkend='var-BB_SCHEDULER'><filename>BB_SCHEDULER</filename></link>
+ <link linkend='var-bb-BB_SCHEDULER'><filename>BB_SCHEDULER</filename></link>
variable.
</para>
</glossdef>
</glossentry>
- <glossentry id='var-BB_SETSCENE_DEPVALID'><glossterm>BB_SETSCENE_DEPVALID</glossterm>
+ <glossentry id='var-bb-BB_SETSCENE_DEPVALID'><glossterm>BB_SETSCENE_DEPVALID</glossterm>
<glossdef>
<para>
Specifies a function BitBake calls that determines
@@ -731,7 +731,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_SETSCENE_VERIFY_FUNCTION2'><glossterm>BB_SETSCENE_VERIFY_FUNCTION2</glossterm>
+ <glossentry id='var-bb-BB_SETSCENE_VERIFY_FUNCTION2'><glossterm>BB_SETSCENE_VERIFY_FUNCTION2</glossterm>
<glossdef>
<para>
Specifies a function to call that verifies the list of
@@ -752,7 +752,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_SIGNATURE_EXCLUDE_FLAGS'><glossterm>BB_SIGNATURE_EXCLUDE_FLAGS</glossterm>
+ <glossentry id='var-bb-BB_SIGNATURE_EXCLUDE_FLAGS'><glossterm>BB_SIGNATURE_EXCLUDE_FLAGS</glossterm>
<glossdef>
<para>
Lists variable flags (varflags)
@@ -771,7 +771,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_SIGNATURE_HANDLER'><glossterm>BB_SIGNATURE_HANDLER</glossterm>
+ <glossentry id='var-bb-BB_SIGNATURE_HANDLER'><glossterm>BB_SIGNATURE_HANDLER</glossterm>
<glossdef>
<para>
Defines the name of the signature handler BitBake uses.
@@ -790,7 +790,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_SRCREV_POLICY'><glossterm>BB_SRCREV_POLICY</glossterm>
+ <glossentry id='var-bb-BB_SRCREV_POLICY'><glossterm>BB_SRCREV_POLICY</glossterm>
<glossdef>
<para>
Defines the behavior of the fetcher when it interacts with
@@ -817,7 +817,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_STAMP_POLICY'><glossterm>BB_STAMP_POLICY</glossterm>
+ <glossentry id='var-bb-BB_STAMP_POLICY'><glossterm>BB_STAMP_POLICY</glossterm>
<glossdef>
<para>
Defines the mode used for how timestamps of stamp files
@@ -836,7 +836,7 @@
<listitem><para><emphasis>whitelist</emphasis> -
Identical to "full" mode except timestamp
comparisons are made for recipes listed in the
- <link linkend='var-BB_STAMP_WHITELIST'><filename>BB_STAMP_WHITELIST</filename></link>
+ <link linkend='var-bb-BB_STAMP_WHITELIST'><filename>BB_STAMP_WHITELIST</filename></link>
variable.
</para></listitem>
</itemizedlist>
@@ -848,19 +848,19 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_STAMP_WHITELIST'><glossterm>BB_STAMP_WHITELIST</glossterm>
+ <glossentry id='var-bb-BB_STAMP_WHITELIST'><glossterm>BB_STAMP_WHITELIST</glossterm>
<glossdef>
<para>
Lists files whose stamp file timestamps are compared when
the stamp policy mode is set to "whitelist".
For information on stamp policies, see the
- <link linkend='var-BB_STAMP_POLICY'><filename>BB_STAMP_POLICY</filename></link>
+ <link linkend='var-bb-BB_STAMP_POLICY'><filename>BB_STAMP_POLICY</filename></link>
variable.
</para>
</glossdef>
</glossentry>
- <glossentry id='var-BB_STRICT_CHECKSUM'><glossterm>BB_STRICT_CHECKSUM</glossterm>
+ <glossentry id='var-bb-BB_STRICT_CHECKSUM'><glossterm>BB_STRICT_CHECKSUM</glossterm>
<glossdef>
<para>
Sets a more strict checksum mechanism for non-local URLs.
@@ -871,7 +871,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_TASK_IONICE_LEVEL'><glossterm>BB_TASK_IONICE_LEVEL</glossterm>
+ <glossentry id='var-bb-BB_TASK_IONICE_LEVEL'><glossterm>BB_TASK_IONICE_LEVEL</glossterm>
<glossdef>
<para>
Allows adjustment of a task's Input/Output priority.
@@ -882,7 +882,7 @@
variable to adjust the I/O priority of these tasks.
<note>
This variable works similarly to the
- <link linkend='var-BB_TASK_NICE_LEVEL'><filename>BB_TASK_NICE_LEVEL</filename></link>
+ <link linkend='var-bb-BB_TASK_NICE_LEVEL'><filename>BB_TASK_NICE_LEVEL</filename></link>
variable except with a task's I/O priorities.
</note>
</para>
@@ -921,7 +921,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_TASK_NICE_LEVEL'><glossterm>BB_TASK_NICE_LEVEL</glossterm>
+ <glossentry id='var-bb-BB_TASK_NICE_LEVEL'><glossterm>BB_TASK_NICE_LEVEL</glossterm>
<glossdef>
<para>
Allows specific tasks to change their priority
@@ -940,7 +940,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_TASKHASH'><glossterm>BB_TASKHASH</glossterm>
+ <glossentry id='var-bb-BB_TASKHASH'><glossterm>BB_TASKHASH</glossterm>
<glossdef>
<para>
Within an executing task, this variable holds the hash
@@ -950,7 +950,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_VERBOSE_LOGS'><glossterm>BB_VERBOSE_LOGS</glossterm>
+ <glossentry id='var-bb-BB_VERBOSE_LOGS'><glossterm>BB_VERBOSE_LOGS</glossterm>
<glossdef>
<para>
Controls how verbose BitBake is during builds.
@@ -960,7 +960,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BB_WORKERCONTEXT'><glossterm>BB_WORKERCONTEXT</glossterm>
+ <glossentry id='var-bb-BB_WORKERCONTEXT'><glossterm>BB_WORKERCONTEXT</glossterm>
<glossdef>
<para>
Specifies if the current context is executing a task.
@@ -973,7 +973,7 @@
</glossentry>
- <glossentry id='var-BBCLASSEXTEND'><glossterm>BBCLASSEXTEND</glossterm>
+ <glossentry id='var-bb-BBCLASSEXTEND'><glossterm>BBCLASSEXTEND</glossterm>
<glossdef>
<para>
Allows you to extend a recipe so that it builds variants
@@ -1009,7 +1009,7 @@
<filename>_class-native</filename>.
For example, to generate a native version of a recipe,
a
- <link linkend='var-DEPENDS'><filename>DEPENDS</filename></link>
+ <link linkend='var-bb-DEPENDS'><filename>DEPENDS</filename></link>
on "foo" is rewritten to a <filename>DEPENDS</filename>
on "foo-native".
</para>
@@ -1028,7 +1028,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBDEBUG'><glossterm>BBDEBUG</glossterm>
+ <glossentry id='var-bb-BBDEBUG'><glossterm>BBDEBUG</glossterm>
<glossdef>
<para>
Sets the BitBake debug output level to a specific value
@@ -1042,7 +1042,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBFILE_COLLECTIONS'><glossterm>BBFILE_COLLECTIONS</glossterm>
+ <glossentry id='var-bb-BBFILE_COLLECTIONS'><glossterm>BBFILE_COLLECTIONS</glossterm>
<glossdef>
<para>Lists the names of configured layers.
These names are used to find the other <filename>BBFILE_*</filename>
@@ -1053,10 +1053,10 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBFILE_PATTERN'><glossterm>BBFILE_PATTERN</glossterm>
+ <glossentry id='var-bb-BBFILE_PATTERN'><glossterm>BBFILE_PATTERN</glossterm>
<glossdef>
<para>Variable that expands to match files from
- <link linkend='var-BBFILES'><filename>BBFILES</filename></link>
+ <link linkend='var-bb-BBFILES'><filename>BBFILES</filename></link>
in a particular layer.
This variable is used in the <filename>conf/layer.conf</filename> file and must
be suffixed with the name of the specific layer (e.g.
@@ -1064,7 +1064,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBFILE_PRIORITY'><glossterm>BBFILE_PRIORITY</glossterm>
+ <glossentry id='var-bb-BBFILE_PRIORITY'><glossterm>BBFILE_PRIORITY</glossterm>
<glossdef>
<para>Assigns the priority for recipe files in each layer.</para>
<para>This variable is useful in situations where the same recipe appears in
@@ -1074,7 +1074,7 @@
letting you control the precedence for the multiple layers.
The precedence established through this variable stands regardless of a
recipe's version
- (<link linkend='var-PV'><filename>PV</filename></link> variable).
+ (<link linkend='var-bb-PV'><filename>PV</filename></link> variable).
For example, a layer that has a recipe with a higher <filename>PV</filename> value but for
which the <filename>BBFILE_PRIORITY</filename> is set to have a lower precedence still has a
lower precedence.</para>
@@ -1083,7 +1083,7 @@
For example, the value 6 has a higher precedence than the value 5.
If not specified, the <filename>BBFILE_PRIORITY</filename> variable is set based on layer
dependencies (see the
- <filename><link linkend='var-LAYERDEPENDS'>LAYERDEPENDS</link></filename> variable for
+ <filename><link linkend='var-bb-LAYERDEPENDS'>LAYERDEPENDS</link></filename> variable for
more information.
The default priority, if unspecified
for a layer with no dependencies, is the lowest defined priority + 1
@@ -1095,7 +1095,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBFILES'><glossterm>BBFILES</glossterm>
+ <glossentry id='var-bb-BBFILES'><glossterm>BBFILES</glossterm>
<glossdef>
<para>
A space-separated list of recipe files BitBake uses to
@@ -1113,7 +1113,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBINCLUDED'><glossterm>BBINCLUDED</glossterm>
+ <glossentry id='var-bb-BBINCLUDED'><glossterm>BBINCLUDED</glossterm>
<glossdef>
<para>
Contains a space-separated list of all of all files that
@@ -1123,7 +1123,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBINCLUDELOGS'><glossterm>BBINCLUDELOGS</glossterm>
+ <glossentry id='var-bb-BBINCLUDELOGS'><glossterm>BBINCLUDELOGS</glossterm>
<glossdef>
<para>
If set to a value, enables printing the task log when
@@ -1132,11 +1132,11 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBINCLUDELOGS_LINES'><glossterm>BBINCLUDELOGS_LINES</glossterm>
+ <glossentry id='var-bb-BBINCLUDELOGS_LINES'><glossterm>BBINCLUDELOGS_LINES</glossterm>
<glossdef>
<para>
If
- <link linkend='var-BBINCLUDELOGS'><filename>BBINCLUDELOGS</filename></link>
+ <link linkend='var-bb-BBINCLUDELOGS'><filename>BBINCLUDELOGS</filename></link>
is set, specifies the maximum number of lines from the
task log file to print when reporting a failed task.
If you do not set <filename>BBINCLUDELOGS_LINES</filename>,
@@ -1145,7 +1145,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBLAYERS'><glossterm>BBLAYERS</glossterm>
+ <glossentry id='var-bb-BBLAYERS'><glossterm>BBLAYERS</glossterm>
<glossdef>
<para>Lists the layers to enable during the build.
This variable is defined in the <filename>bblayers.conf</filename> configuration
@@ -1166,7 +1166,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBLAYERS_FETCH_DIR'><glossterm>BBLAYERS_FETCH_DIR</glossterm>
+ <glossentry id='var-bb-BBLAYERS_FETCH_DIR'><glossterm>BBLAYERS_FETCH_DIR</glossterm>
<glossdef>
<para>
Sets the base location where layers are stored.
@@ -1178,7 +1178,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBMASK'><glossterm>BBMASK</glossterm>
+ <glossentry id='var-bb-BBMASK'><glossterm>BBMASK</glossterm>
<glossdef>
<para>
Prevents BitBake from processing recipes and recipe
@@ -1236,7 +1236,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBMULTICONFIG'><glossterm>BBMULTICONFIG</glossterm>
+ <glossentry id='var-bb-BBMULTICONFIG'><glossterm>BBMULTICONFIG</glossterm>
<info>
BBMULTICONFIG[doc] = "Enables BitBake to perform multiple configuration builds and lists each separate configuration (multiconfig)."
</info>
@@ -1275,7 +1275,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBPATH'><glossterm>BBPATH</glossterm>
+ <glossentry id='var-bb-BBPATH'><glossterm>BBPATH</glossterm>
<glossdef>
<para>
Used by BitBake to locate class
@@ -1302,7 +1302,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBSERVER'><glossterm>BBSERVER</glossterm>
+ <glossentry id='var-bb-BBSERVER'><glossterm>BBSERVER</glossterm>
<glossdef>
<para>
Points to the server that runs memory-resident BitBake.
@@ -1312,7 +1312,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBTARGETS'><glossterm>BBTARGETS</glossterm>
+ <glossentry id='var-bb-BBTARGETS'><glossterm>BBTARGETS</glossterm>
<glossdef>
<para>
Allows you to use a configuration file to add to the list
@@ -1321,14 +1321,14 @@
</glossdef>
</glossentry>
- <glossentry id='var-BBVERSIONS'><glossterm>BBVERSIONS</glossterm>
+ <glossentry id='var-bb-BBVERSIONS'><glossterm>BBVERSIONS</glossterm>
<glossdef>
<para>
Allows a single recipe to build multiple versions of a
project from a single recipe file.
You also able to specify conditional metadata
using the
- <link linkend='var-OVERRIDES'><filename>OVERRIDES</filename></link>
+ <link linkend='var-bb-OVERRIDES'><filename>OVERRIDES</filename></link>
mechanism for a single version or for an optionally named
range of versions.
</para>
@@ -1342,7 +1342,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BITBAKE_UI'><glossterm>BITBAKE_UI</glossterm>
+ <glossentry id='var-bb-BITBAKE_UI'><glossterm>BITBAKE_UI</glossterm>
<glossdef>
<para>
Used to specify the UI module to use when running BitBake.
@@ -1356,7 +1356,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BUILDNAME'><glossterm>BUILDNAME</glossterm>
+ <glossentry id='var-bb-BUILDNAME'><glossterm>BUILDNAME</glossterm>
<glossdef>
<para>
A name assigned to the build.
@@ -1366,7 +1366,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-BZRDIR'><glossterm>BZRDIR</glossterm>
+ <glossentry id='var-bb-BZRDIR'><glossterm>BZRDIR</glossterm>
<glossdef>
<para>
The directory in which files checked out of a Bazaar
@@ -1377,9 +1377,9 @@
</glossdiv>
- <glossdiv id='var-glossary-c'><title>C</title>
+ <glossdiv id='var-bb-glossary-c'><title>C</title>
- <glossentry id='var-CACHE'><glossterm>CACHE</glossterm>
+ <glossentry id='var-bb-CACHE'><glossterm>CACHE</glossterm>
<glossdef>
<para>
Specifies the directory BitBake uses to store a cache
@@ -1389,7 +1389,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-CVSDIR'><glossterm>CVSDIR</glossterm>
+ <glossentry id='var-bb-CVSDIR'><glossterm>CVSDIR</glossterm>
<glossdef>
<para>
The directory in which files checked out under the
@@ -1400,9 +1400,9 @@
</glossdiv>
- <glossdiv id='var-glossary-d'><title>D</title>
+ <glossdiv id='var-bb-glossary-d'><title>D</title>
- <glossentry id='var-DEFAULT_PREFERENCE'><glossterm>DEFAULT_PREFERENCE</glossterm>
+ <glossentry id='var-bb-DEFAULT_PREFERENCE'><glossterm>DEFAULT_PREFERENCE</glossterm>
<glossdef>
<para>
Specifies a weak bias for recipe selection priority.
@@ -1413,20 +1413,20 @@
piece of software.
Using the variable in this way causes the stable version
of the recipe to build by default in the absence of
- <filename><link linkend='var-PREFERRED_VERSION'>PREFERRED_VERSION</link></filename>
+ <filename><link linkend='var-bb-PREFERRED_VERSION'>PREFERRED_VERSION</link></filename>
being used to build the development version.
</para>
<note>
The bias provided by <filename>DEFAULT_PREFERENCE</filename>
is weak and is overridden by
- <filename><link linkend='var-BBFILE_PRIORITY'>BBFILE_PRIORITY</link></filename>
+ <filename><link linkend='var-bb-BBFILE_PRIORITY'>BBFILE_PRIORITY</link></filename>
if that variable is different between two layers
that contain different versions of the same recipe.
</note>
</glossdef>
</glossentry>
- <glossentry id='var-DEPENDS'><glossterm>DEPENDS</glossterm>
+ <glossentry id='var-bb-DEPENDS'><glossterm>DEPENDS</glossterm>
<glossdef>
<para>
Lists a recipe's build-time dependencies
@@ -1451,13 +1451,13 @@
<para>
For information on runtime dependencies, see the
- <link linkend='var-RDEPENDS'><filename>RDEPENDS</filename></link>
+ <link linkend='var-bb-RDEPENDS'><filename>RDEPENDS</filename></link>
variable.
</para>
</glossdef>
</glossentry>
- <glossentry id='var-DESCRIPTION'><glossterm>DESCRIPTION</glossterm>
+ <glossentry id='var-bb-DESCRIPTION'><glossterm>DESCRIPTION</glossterm>
<glossdef>
<para>
A long description for the recipe.
@@ -1465,7 +1465,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-DL_DIR'><glossterm>DL_DIR</glossterm>
+ <glossentry id='var-bb-DL_DIR'><glossterm>DL_DIR</glossterm>
<glossdef>
<para>
The central download directory used by the build process to
@@ -1474,7 +1474,7 @@
suitable for mirroring for everything except Git
repositories.
If you want tarballs of Git repositories, use the
- <link linkend='var-BB_GENERATE_MIRROR_TARBALLS'><filename>BB_GENERATE_MIRROR_TARBALLS</filename></link>
+ <link linkend='var-bb-BB_GENERATE_MIRROR_TARBALLS'><filename>BB_GENERATE_MIRROR_TARBALLS</filename></link>
variable.
</para>
</glossdef>
@@ -1482,9 +1482,9 @@
</glossentry>
</glossdiv>
- <glossdiv id='var-glossary-e'><title>E</title>
+ <glossdiv id='var-bb-glossary-e'><title>E</title>
- <glossentry id='var-EXCLUDE_FROM_WORLD'><glossterm>EXCLUDE_FROM_WORLD</glossterm>
+ <glossentry id='var-bb-EXCLUDE_FROM_WORLD'><glossterm>EXCLUDE_FROM_WORLD</glossterm>
<glossdef>
<para>
Directs BitBake to exclude a recipe from world builds (i.e.
@@ -1512,9 +1512,9 @@
</glossdiv>
- <glossdiv id='var-glossary-f'><title>F</title>
+ <glossdiv id='var-bb-glossary-f'><title>F</title>
- <glossentry id='var-FAKEROOT'><glossterm>FAKEROOT</glossterm>
+ <glossentry id='var-bb-FAKEROOT'><glossterm>FAKEROOT</glossterm>
<glossdef>
<para>
Contains the command to use when running a shell script
@@ -1527,19 +1527,19 @@
</glossdef>
</glossentry>
- <glossentry id='var-FAKEROOTBASEENV'><glossterm>FAKEROOTBASEENV</glossterm>
+ <glossentry id='var-bb-FAKEROOTBASEENV'><glossterm>FAKEROOTBASEENV</glossterm>
<glossdef>
<para>
Lists environment variables to set when executing
the command defined by
- <link linkend='var-FAKEROOTCMD'><filename>FAKEROOTCMD</filename></link>
+ <link linkend='var-bb-FAKEROOTCMD'><filename>FAKEROOTCMD</filename></link>
that starts the bitbake-worker process
in the fakeroot environment.
</para>
</glossdef>
</glossentry>
- <glossentry id='var-FAKEROOTCMD'><glossterm>FAKEROOTCMD</glossterm>
+ <glossentry id='var-bb-FAKEROOTCMD'><glossterm>FAKEROOTCMD</glossterm>
<glossdef>
<para>
Contains the command that starts the bitbake-worker
@@ -1548,7 +1548,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-FAKEROOTDIRS'><glossterm>FAKEROOTDIRS</glossterm>
+ <glossentry id='var-bb-FAKEROOTDIRS'><glossterm>FAKEROOTDIRS</glossterm>
<glossdef>
<para>
Lists directories to create before running a task in
@@ -1557,33 +1557,33 @@
</glossdef>
</glossentry>
- <glossentry id='var-FAKEROOTENV'><glossterm>FAKEROOTENV</glossterm>
+ <glossentry id='var-bb-FAKEROOTENV'><glossterm>FAKEROOTENV</glossterm>
<glossdef>
<para>
Lists environment variables to set when running a task
in the fakeroot environment.
For additional information on environment variables and
the fakeroot environment, see the
- <link linkend='var-FAKEROOTBASEENV'><filename>FAKEROOTBASEENV</filename></link>
+ <link linkend='var-bb-FAKEROOTBASEENV'><filename>FAKEROOTBASEENV</filename></link>
variable.
</para>
</glossdef>
</glossentry>
- <glossentry id='var-FAKEROOTNOENV'><glossterm>FAKEROOTNOENV</glossterm>
+ <glossentry id='var-bb-FAKEROOTNOENV'><glossterm>FAKEROOTNOENV</glossterm>
<glossdef>
<para>
Lists environment variables to set when running a task
that is not in the fakeroot environment.
For additional information on environment variables and
the fakeroot environment, see the
- <link linkend='var-FAKEROOTENV'><filename>FAKEROOTENV</filename></link>
+ <link linkend='var-bb-FAKEROOTENV'><filename>FAKEROOTENV</filename></link>
variable.
</para>
</glossdef>
</glossentry>
- <glossentry id='var-FETCHCMD'><glossterm>FETCHCMD</glossterm>
+ <glossentry id='var-bb-FETCHCMD'><glossterm>FETCHCMD</glossterm>
<glossdef>
<para>
Defines the command the BitBake fetcher module
@@ -1595,7 +1595,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-FILE'><glossterm>FILE</glossterm>
+ <glossentry id='var-bb-FILE'><glossterm>FILE</glossterm>
<glossdef>
<para>
Points at the current file.
@@ -1607,7 +1607,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-FILESPATH'><glossterm>FILESPATH</glossterm>
+ <glossentry id='var-bb-FILESPATH'><glossterm>FILESPATH</glossterm>
<glossdef>
<para>
Specifies directories BitBake uses when searching for
@@ -1625,9 +1625,9 @@
</glossdiv>
- <glossdiv id='var-glossary-g'><title>G</title>
+ <glossdiv id='var-bb-glossary-g'><title>G</title>
- <glossentry id='var-GITDIR'><glossterm>GITDIR</glossterm>
+ <glossentry id='var-bb-GITDIR'><glossterm>GITDIR</glossterm>
<glossdef>
<para>
The directory in which a local copy of a Git repository
@@ -1639,9 +1639,9 @@
</glossdiv>
- <glossdiv id='var-glossary-h'><title>H</title>
+ <glossdiv id='var-bb-glossary-h'><title>H</title>
- <glossentry id='var-HGDIR'><glossterm>HGDIR</glossterm>
+ <glossentry id='var-bb-HGDIR'><glossterm>HGDIR</glossterm>
<glossdef>
<para>
The directory in which files checked out of a Mercurial
@@ -1650,7 +1650,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-HOMEPAGE'><glossterm>HOMEPAGE</glossterm>
+ <glossentry id='var-bb-HOMEPAGE'><glossterm>HOMEPAGE</glossterm>
<glossdef>
<para>Website where more information about the software the recipe is building
can be found.</para>
@@ -1659,9 +1659,9 @@
</glossdiv>
- <glossdiv id='var-glossary-i'><title>I</title>
+ <glossdiv id='var-bb-glossary-i'><title>I</title>
- <glossentry id='var-INHERIT'><glossterm>INHERIT</glossterm>
+ <glossentry id='var-bb-INHERIT'><glossterm>INHERIT</glossterm>
<glossdef>
<para>
Causes the named class or classes to be inherited globally.
@@ -1691,15 +1691,15 @@
</glossdiv>
-->
- <glossdiv id='var-glossary-l'><title>L</title>
+ <glossdiv id='var-bb-glossary-l'><title>L</title>
- <glossentry id='var-LAYERDEPENDS'><glossterm>LAYERDEPENDS</glossterm>
+ <glossentry id='var-bb-LAYERDEPENDS'><glossterm>LAYERDEPENDS</glossterm>
<glossdef>
<para>Lists the layers, separated by spaces, upon which this recipe depends.
Optionally, you can specify a specific layer version for a dependency
by adding it to the end of the layer name with a colon, (e.g. "anotherlayer:3"
to be compared against
- <link linkend='var-LAYERVERSION'><filename>LAYERVERSION</filename></link><filename>_anotherlayer</filename>
+ <link linkend='var-bb-LAYERVERSION'><filename>LAYERVERSION</filename></link><filename>_anotherlayer</filename>
in this case).
BitBake produces an error if any dependency is missing or
the version numbers do not match exactly (if specified).</para>
@@ -1710,7 +1710,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-LAYERDIR'><glossterm>LAYERDIR</glossterm>
+ <glossentry id='var-bb-LAYERDIR'><glossterm>LAYERDIR</glossterm>
<glossdef>
<para>When used inside the <filename>layer.conf</filename> configuration
file, this variable provides the path of the current layer.
@@ -1719,22 +1719,22 @@
</glossdef>
</glossentry>
- <glossentry id='var-LAYERDIR_RE'><glossterm>LAYERDIR_RE</glossterm>
+ <glossentry id='var-bb-LAYERDIR_RE'><glossterm>LAYERDIR_RE</glossterm>
<glossdef>
<para>When used inside the <filename>layer.conf</filename> configuration
file, this variable provides the path of the current layer,
escaped for use in a regular expression
- (<link linkend='var-BBFILE_PATTERN'><filename>BBFILE_PATTERN</filename></link>).
+ (<link linkend='var-bb-BBFILE_PATTERN'><filename>BBFILE_PATTERN</filename></link>).
This variable is not available outside of <filename>layer.conf</filename>
and references are expanded immediately when parsing of the file completes.</para>
</glossdef>
</glossentry>
- <glossentry id='var-LAYERVERSION'><glossterm>LAYERVERSION</glossterm>
+ <glossentry id='var-bb-LAYERVERSION'><glossterm>LAYERVERSION</glossterm>
<glossdef>
<para>Optionally specifies the version of a layer as a single number.
You can use this variable within
- <link linkend='var-LAYERDEPENDS'><filename>LAYERDEPENDS</filename></link>
+ <link linkend='var-bb-LAYERDEPENDS'><filename>LAYERDEPENDS</filename></link>
for another layer in order to depend on a specific version
of the layer.</para>
<para>
@@ -1744,7 +1744,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-LICENSE'><glossterm>LICENSE</glossterm>
+ <glossentry id='var-bb-LICENSE'><glossterm>LICENSE</glossterm>
<glossdef>
<para>
The list of source licenses for the recipe.
@@ -1754,9 +1754,9 @@
</glossdiv>
- <glossdiv id='var-glossary-m'><title>M</title>
+ <glossdiv id='var-bb-glossary-m'><title>M</title>
- <glossentry id='var-MIRRORS'><glossterm>MIRRORS</glossterm>
+ <glossentry id='var-bb-MIRRORS'><glossterm>MIRRORS</glossterm>
<glossdef>
<para>
Specifies additional paths from which BitBake gets source code.
@@ -1764,14 +1764,14 @@
tries the local download directory.
If that location fails, the build system tries locations
defined by
- <link linkend='var-PREMIRRORS'><filename>PREMIRRORS</filename></link>,
+ <link linkend='var-bb-PREMIRRORS'><filename>PREMIRRORS</filename></link>,
the upstream source, and then locations specified by
<filename>MIRRORS</filename> in that order.
</para>
</glossdef>
</glossentry>
- <glossentry id='var-MULTI_PROVIDER_WHITELIST'><glossterm>MULTI_PROVIDER_WHITELIST</glossterm>
+ <glossentry id='var-bb-MULTI_PROVIDER_WHITELIST'><glossterm>MULTI_PROVIDER_WHITELIST</glossterm>
<glossdef>
<para>
Allows you to suppress BitBake warnings caused when
@@ -1804,9 +1804,9 @@
</glossdiv>
-->
- <glossdiv id='var-glossary-o'><title>O</title>
+ <glossdiv id='var-bb-glossary-o'><title>O</title>
- <glossentry id='var-OVERRIDES'><glossterm>OVERRIDES</glossterm>
+ <glossentry id='var-bb-OVERRIDES'><glossterm>OVERRIDES</glossterm>
<glossdef>
<para>
BitBake uses <filename>OVERRIDES</filename> to control
@@ -1829,9 +1829,9 @@
</glossentry>
</glossdiv>
- <glossdiv id='var-glossary-p'><title>P</title>
+ <glossdiv id='var-bb-glossary-p'><title>P</title>
- <glossentry id='var-P4DIR'><glossterm>P4DIR</glossterm>
+ <glossentry id='var-bb-P4DIR'><glossterm>P4DIR</glossterm>
<glossdef>
<para>
The directory in which a local copy of a Perforce depot
@@ -1840,14 +1840,14 @@
</glossdef>
</glossentry>
- <glossentry id='var-PACKAGES'><glossterm>PACKAGES</glossterm>
+ <glossentry id='var-bb-PACKAGES'><glossterm>PACKAGES</glossterm>
<glossdef>
<para>The list of packages the recipe creates.
</para>
</glossdef>
</glossentry>
- <glossentry id='var-PACKAGES_DYNAMIC'><glossterm>PACKAGES_DYNAMIC</glossterm>
+ <glossentry id='var-bb-PACKAGES_DYNAMIC'><glossterm>PACKAGES_DYNAMIC</glossterm>
<glossdef>
<para>
A promise that your recipe satisfies runtime dependencies
@@ -1856,7 +1856,7 @@
does not actually satisfy the dependencies, it only states that
they should be satisfied.
For example, if a hard, runtime dependency
- (<link linkend='var-RDEPENDS'><filename>RDEPENDS</filename></link>)
+ (<link linkend='var-bb-RDEPENDS'><filename>RDEPENDS</filename></link>)
of another package is satisfied during the build
through the <filename>PACKAGES_DYNAMIC</filename>
variable, but a package with the module name is never actually
@@ -1865,7 +1865,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-PE'><glossterm>PE</glossterm>
+ <glossentry id='var-bb-PE'><glossterm>PE</glossterm>
<glossdef>
<para>
The epoch of the recipe.
@@ -1877,7 +1877,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-PERSISTENT_DIR'><glossterm>PERSISTENT_DIR</glossterm>
+ <glossentry id='var-bb-PERSISTENT_DIR'><glossterm>PERSISTENT_DIR</glossterm>
<glossdef>
<para>
Specifies the directory BitBake uses to store data that
@@ -1889,7 +1889,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-PF'><glossterm>PF</glossterm>
+ <glossentry id='var-bb-PF'><glossterm>PF</glossterm>
<glossdef>
<para>
Specifies the recipe or package name and includes all version and revision
@@ -1899,27 +1899,27 @@
</glossdef>
</glossentry>
- <glossentry id='var-PN'><glossterm>PN</glossterm>
+ <glossentry id='var-bb-PN'><glossterm>PN</glossterm>
<glossdef>
<para>The recipe name.</para>
</glossdef>
</glossentry>
- <glossentry id='var-PR'><glossterm>PR</glossterm>
+ <glossentry id='var-bb-PR'><glossterm>PR</glossterm>
<glossdef>
<para>The revision of the recipe.
</para>
</glossdef>
</glossentry>
- <glossentry id='var-PREFERRED_PROVIDER'><glossterm>PREFERRED_PROVIDER</glossterm>
+ <glossentry id='var-bb-PREFERRED_PROVIDER'><glossterm>PREFERRED_PROVIDER</glossterm>
<glossdef>
<para>
Determines which recipe should be given preference when
multiple recipes provide the same item.
You should always suffix the variable with the name of the
provided item, and you should set it to the
- <link linkend='var-PN'><filename>PN</filename></link>
+ <link linkend='var-bb-PN'><filename>PN</filename></link>
of the recipe to which you want to give precedence.
Some examples:
<literallayout class='monospaced'>
@@ -1931,14 +1931,14 @@
</glossdef>
</glossentry>
- <glossentry id='var-PREFERRED_PROVIDERS'><glossterm>PREFERRED_PROVIDERS</glossterm>
+ <glossentry id='var-bb-PREFERRED_PROVIDERS'><glossterm>PREFERRED_PROVIDERS</glossterm>
<glossdef>
<para>
Determines which recipe should be given preference for
cases where multiple recipes provide the same item.
Functionally,
<filename>PREFERRED_PROVIDERS</filename> is identical to
- <link linkend='var-PREFERRED_PROVIDER'><filename>PREFERRED_PROVIDER</filename></link>.
+ <link linkend='var-bb-PREFERRED_PROVIDER'><filename>PREFERRED_PROVIDER</filename></link>.
However, the <filename>PREFERRED_PROVIDERS</filename>
variable lets you define preferences for multiple
situations using the following form:
@@ -1954,15 +1954,15 @@
</glossdef>
</glossentry>
- <glossentry id='var-PREFERRED_VERSION'><glossterm>PREFERRED_VERSION</glossterm>
+ <glossentry id='var-bb-PREFERRED_VERSION'><glossterm>PREFERRED_VERSION</glossterm>
<glossdef>
<para>
If there are multiple versions of recipes available, this
variable determines which recipe should be given preference.
You must always suffix the variable with the
- <link linkend='var-PN'><filename>PN</filename></link>
+ <link linkend='var-bb-PN'><filename>PN</filename></link>
you want to select, and you should set
- <link linkend='var-PV'><filename>PV</filename></link>
+ <link linkend='var-bb-PV'><filename>PV</filename></link>
accordingly for precedence.
</para>
@@ -1989,7 +1989,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-PREMIRRORS'><glossterm>PREMIRRORS</glossterm>
+ <glossentry id='var-bb-PREMIRRORS'><glossterm>PREMIRRORS</glossterm>
<glossdef>
<para>
Specifies additional paths from which BitBake gets source code.
@@ -1998,7 +1998,7 @@
If that location fails, the build system tries locations
defined by <filename>PREMIRRORS</filename>, the upstream
source, and then locations specified by
- <link linkend='var-MIRRORS'><filename>MIRRORS</filename></link>
+ <link linkend='var-bb-MIRRORS'><filename>MIRRORS</filename></link>
in that order.
</para>
@@ -2022,20 +2022,20 @@
</glossdef>
</glossentry>
- <glossentry id='var-PROVIDES'><glossterm>PROVIDES</glossterm>
+ <glossentry id='var-bb-PROVIDES'><glossterm>PROVIDES</glossterm>
<glossdef>
<para>
A list of aliases by which a particular recipe can be
known.
By default, a recipe's own
- <filename><link linkend='var-PN'>PN</link></filename>
+ <filename><link linkend='var-bb-PN'>PN</link></filename>
is implicitly already in its <filename>PROVIDES</filename>
list.
If a recipe uses <filename>PROVIDES</filename>, the
additional aliases are synonyms for the recipe and can
be useful satisfying dependencies of other recipes during
the build as specified by
- <filename><link linkend='var-DEPENDS'>DEPENDS</link></filename>.
+ <filename><link linkend='var-bb-DEPENDS'>DEPENDS</link></filename>.
</para>
<para>
@@ -2059,7 +2059,7 @@
virtual target in <filename>PROVIDES</filename>.
Recipes that depend on the functionality in question can
include the virtual target in
- <link linkend='var-DEPENDS'><filename>DEPENDS</filename></link>
+ <link linkend='var-bb-DEPENDS'><filename>DEPENDS</filename></link>
to leave the choice of provider open.
</para>
@@ -2072,11 +2072,11 @@
</glossdef>
</glossentry>
- <glossentry id='var-PRSERV_HOST'><glossterm>PRSERV_HOST</glossterm>
+ <glossentry id='var-bb-PRSERV_HOST'><glossterm>PRSERV_HOST</glossterm>
<glossdef>
<para>
The network based
- <link linkend='var-PR'><filename>PR</filename></link>
+ <link linkend='var-bb-PR'><filename>PR</filename></link>
service host and port.
</para>
@@ -2094,7 +2094,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-PV'><glossterm>PV</glossterm>
+ <glossentry id='var-bb-PV'><glossterm>PV</glossterm>
<glossdef>
<para>The version of the recipe.
</para>
@@ -2108,9 +2108,9 @@
</glossdiv>
-->
- <glossdiv id='var-glossary-r'><title>R</title>
+ <glossdiv id='var-bb-glossary-r'><title>R</title>
- <glossentry id='var-RDEPENDS'><glossterm>RDEPENDS</glossterm>
+ <glossentry id='var-bb-RDEPENDS'><glossterm>RDEPENDS</glossterm>
<glossdef>
<para>
Lists a package's runtime dependencies (i.e. other packages)
@@ -2165,13 +2165,13 @@
<para>
For information on build-time dependencies, see the
- <link linkend='var-DEPENDS'><filename>DEPENDS</filename></link>
+ <link linkend='var-bb-DEPENDS'><filename>DEPENDS</filename></link>
variable.
</para>
</glossdef>
</glossentry>
- <glossentry id='var-REPODIR'><glossterm>REPODIR</glossterm>
+ <glossentry id='var-bb-REPODIR'><glossterm>REPODIR</glossterm>
<glossdef>
<para>
The directory in which a local copy of a
@@ -2181,14 +2181,14 @@
</glossdef>
</glossentry>
- <glossentry id='var-RPROVIDES'><glossterm>RPROVIDES</glossterm>
+ <glossentry id='var-bb-RPROVIDES'><glossterm>RPROVIDES</glossterm>
<glossdef>
<para>
A list of package name aliases that a package also provides.
These aliases are useful for satisfying runtime dependencies
of other packages both during the build and on the target
(as specified by
- <filename><link linkend='var-RDEPENDS'>RDEPENDS</link></filename>).
+ <filename><link linkend='var-bb-RDEPENDS'>RDEPENDS</link></filename>).
</para>
<para>
As with all package-controlling variables, you must always
@@ -2201,7 +2201,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-RRECOMMENDS'><glossterm>RRECOMMENDS</glossterm>
+ <glossentry id='var-bb-RRECOMMENDS'><glossterm>RRECOMMENDS</glossterm>
<glossdef>
<para>
A list of packages that extends the usability of a package
@@ -2210,7 +2210,7 @@
packages in order to successfully build, but needs them for
the extended usability.
To specify runtime dependencies for packages, see the
- <filename><link linkend='var-RDEPENDS'>RDEPENDS</link></filename>
+ <filename><link linkend='var-bb-RDEPENDS'>RDEPENDS</link></filename>
variable.
</para>
@@ -2243,15 +2243,15 @@
</glossdiv>
- <glossdiv id='var-glossary-s'><title>S</title>
+ <glossdiv id='var-bb-glossary-s'><title>S</title>
- <glossentry id='var-SECTION'><glossterm>SECTION</glossterm>
+ <glossentry id='var-bb-SECTION'><glossterm>SECTION</glossterm>
<glossdef>
<para>The section in which packages should be categorized.</para>
</glossdef>
</glossentry>
- <glossentry id='var-SRC_URI'><glossterm>SRC_URI</glossterm>
+ <glossentry id='var-bb-SRC_URI'><glossterm>SRC_URI</glossterm>
<glossdef>
<para>
The list of source files - local or remote.
@@ -2272,7 +2272,7 @@
the metadata,
from the local machine.
The path is relative to the
- <link linkend='var-FILESPATH'><filename>FILESPATH</filename></link>
+ <link linkend='var-bb-FILESPATH'><filename>FILESPATH</filename></link>
variable.</para></listitem>
<listitem><para><emphasis><filename>bzr://</filename> -</emphasis> Fetches files from a
Bazaar revision control repository.</para></listitem>
@@ -2322,7 +2322,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-SRCDATE'><glossterm>SRCDATE</glossterm>
+ <glossentry id='var-bb-SRCDATE'><glossterm>SRCDATE</glossterm>
<glossdef>
<para>
The date of the source code used to build the package.
@@ -2331,7 +2331,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-SRCREV'><glossterm>SRCREV</glossterm>
+ <glossentry id='var-bb-SRCREV'><glossterm>SRCREV</glossterm>
<glossdef>
<para>
The revision of the source code used to build the package.
@@ -2344,13 +2344,13 @@
</glossdef>
</glossentry>
- <glossentry id='var-SRCREV_FORMAT'><glossterm>SRCREV_FORMAT</glossterm>
+ <glossentry id='var-bb-SRCREV_FORMAT'><glossterm>SRCREV_FORMAT</glossterm>
<glossdef>
<para>
Helps construct valid
- <link linkend='var-SRCREV'><filename>SRCREV</filename></link>
+ <link linkend='var-bb-SRCREV'><filename>SRCREV</filename></link>
values when multiple source controlled URLs are used in
- <link linkend='var-SRC_URI'><filename>SRC_URI</filename></link>.
+ <link linkend='var-bb-SRC_URI'><filename>SRC_URI</filename></link>.
</para>
<para>
@@ -2371,7 +2371,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-STAMP'><glossterm>STAMP</glossterm>
+ <glossentry id='var-bb-STAMP'><glossterm>STAMP</glossterm>
<glossdef>
<para>
Specifies the base path used to create recipe stamp files.
@@ -2381,12 +2381,12 @@
</glossdef>
</glossentry>
- <glossentry id='var-STAMPCLEAN'><glossterm>STAMPCLEAN</glossterm>
+ <glossentry id='var-bb-STAMPCLEAN'><glossterm>STAMPCLEAN</glossterm>
<glossdef>
<para>
Specifies the base path used to create recipe stamp files.
Unlike the
- <link linkend='var-STAMP'><filename>STAMP</filename></link>
+ <link linkend='var-bb-STAMP'><filename>STAMP</filename></link>
variable, <filename>STAMPCLEAN</filename> can contain
wildcards to match the range of files a clean operation
should remove.
@@ -2396,7 +2396,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-SUMMARY'><glossterm>SUMMARY</glossterm>
+ <glossentry id='var-bb-SUMMARY'><glossterm>SUMMARY</glossterm>
<glossdef>
<para>
A short summary for the recipe, which is 72 characters or less.
@@ -2404,7 +2404,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-SVNDIR'><glossterm>SVNDIR</glossterm>
+ <glossentry id='var-bb-SVNDIR'><glossterm>SVNDIR</glossterm>
<glossdef>
<para>
The directory in which files checked out of a Subversion
@@ -2415,9 +2415,9 @@
</glossdiv>
- <glossdiv id='var-glossary-t'><title>T</title>
+ <glossdiv id='var-bb-glossary-t'><title>T</title>
- <glossentry id='var-T'><glossterm>T</glossterm>
+ <glossentry id='var-bb-T'><glossterm>T</glossterm>
<glossdef>
<para>Points to a directory were BitBake places
temporary files, which consist mostly of task logs and
@@ -2426,7 +2426,7 @@
</glossdef>
</glossentry>
- <glossentry id='var-TOPDIR'><glossterm>TOPDIR</glossterm>
+ <glossentry id='var-bb-TOPDIR'><glossterm>TOPDIR</glossterm>
<glossdef>
<para>
Points to the build directory.