reset upstream subtrees to yocto 2.6
Reset the following subtrees on thud HEAD:
poky: 87e3a9739d
meta-openembedded: 6094ae18c8
meta-security: 31dc4e7532
meta-raspberrypi: a48743dc36
meta-xilinx: c42016e2e6
Also re-apply backports that didn't make it into thud:
poky:
17726d0 systemd-systemctl-native: handle Install wildcards
meta-openembedded:
4321a5d libtinyxml2: update to 7.0.1
042f0a3 libcereal: Add native and nativesdk classes
e23284f libcereal: Allow empty package
030e8d4 rsyslog: curl-less build with fmhttp PACKAGECONFIG
179a1b9 gtest: update to 1.8.1
Squashed OpenBMC subtree compatibility updates:
meta-aspeed:
Brad Bishop (1):
aspeed: add yocto 2.6 compatibility
meta-ibm:
Brad Bishop (1):
ibm: prepare for yocto 2.6
meta-ingrasys:
Brad Bishop (1):
ingrasys: set layer compatibility to yocto 2.6
meta-openpower:
Brad Bishop (1):
openpower: set layer compatibility to yocto 2.6
meta-phosphor:
Brad Bishop (3):
phosphor: set layer compatibility to thud
phosphor: libgpg-error: drop patches
phosphor: react to fitimage artifact rename
Ed Tanous (4):
Dropbear: upgrade options for latest upgrade
yocto2.6: update openssl options
busybox: remove upstream watchdog patch
systemd: Rebase CONFIG_CGROUP_BPF patch
Change-Id: I7b1fe71cca880d0372a82d94b5fd785323e3a9e7
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-spl-zynq-init.inc b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-spl-zynq-init.inc
index 9cf09ff..cf8b9b7 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-spl-zynq-init.inc
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-spl-zynq-init.inc
@@ -64,10 +64,8 @@
d.setVar("SPL_BINARY", "")
if providesbin and d.getVar("SOC_FAMILY") in ["zynqmp"]:
- # depend on the pmu-firmware build
- d.appendVar("DEPENDS", " virtual/pmu-firmware")
# determine the path relative to the source tree
- relpath = os.path.relpath(d.expand("${DEPLOY_DIR_IMAGE}/pmu-${MACHINE}.bin"), d.getVar("S"))
+ relpath = os.path.relpath(d.expand("${PMU_FIRMWARE_DEPLOY_DIR}/${PMU_FIRMWARE_IMAGE_NAME}.bin"), d.getVar("S"))
# setup PMU Firmware path via MAKEFLAGS
d.appendVar("EXTRA_OEMAKE", " CONFIG_PMUFW_INIT_FILE=\"{0}\"".format(relpath))
}