diff --git a/meta-security/recipes-ids/aide/aide_0.17.3.bb b/meta-security/recipes-ids/aide/aide_0.17.3.bb
index 522cd85..fbfa8a7 100644
--- a/meta-security/recipes-ids/aide/aide_0.17.3.bb
+++ b/meta-security/recipes-ids/aide/aide_0.17.3.bb
@@ -25,7 +25,7 @@
 PACKAGECONFIG[mhash] = "--with-mhash, --without-mhash, libmhash, libmhash"
 PACKAGECONFIG[e2fsattrs] = "--with-e2fsattrs, --without-e2fsattrs, e2fsprogs, e2fsprogs"
 
-do_install_append () {
+do_install:append () {
     install -d ${D}${libdir}/${PN}/logs   
     install -d ${D}${sysconfdir}   
     install ${WORKDIR}/aide.conf ${D}${sysconfdir}/
@@ -33,9 +33,9 @@
 
 CONF_FILE = "${sysconfdir}/aide.conf"
 
-FILES_${PN} += "${libdir}/${PN} ${sysconfdir}/aide.conf"
+FILES:${PN} += "${libdir}/${PN} ${sysconfdir}/aide.conf"
 
-pkg_postinst_ontarget_${PN} () {
+pkg_postinst_ontarget:${PN} () {
     /usr/bin/aide -i
 }
 RDPENDS_${PN} = "bison, libpcre"
diff --git a/meta-security/recipes-ids/crowdsec/crowdsec_1.1.1.bb b/meta-security/recipes-ids/crowdsec/crowdsec_1.1.1.bb
new file mode 100644
index 0000000..887c75d
--- /dev/null
+++ b/meta-security/recipes-ids/crowdsec/crowdsec_1.1.1.bb
@@ -0,0 +1,42 @@
+SUMMARY = "CrowdSec is a free, modern & collaborative behavior detection engine, coupled with a global IP reputation network."
+
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://src/import/LICENSE;md5=105e75b680b2ab82fa5718661b41f3bf"
+
+SRC_URI = "git://github.com/crowdsecurity/crowdsec.git;branch=master"
+SRCREV = "73e0bbaf93070f4a640eb5a22212b5dcf26699de"
+
+DEPENDS = "jq-native"
+
+GO_IMPORT = "import"
+
+inherit go
+
+S = "${WORKDIR}/git"
+
+do_compile() {
+    export GOARCH="${TARGET_GOARCH}"
+    export GOROOT="${STAGING_LIBDIR_NATIVE}/${TARGET_SYS}/go"
+
+    # Pass the needed cflags/ldflags so that cgo
+    # can find the needed headers files and libraries
+    export CGO_ENABLED="1"
+    export CFLAGS=""
+    export LDFLAGS=""
+    export CGO_CFLAGS="${BUILDSDK_CFLAGS} --sysroot=${STAGING_DIR_TARGET}"
+    export CGO_LDFLAGS="${BUILDSDK_LDFLAGS} --sysroot=${STAGING_DIR_TARGET}"
+
+    cd ${S}/src/import
+    oe_runmake release
+}
+
+do_install_ () {
+   chmod +x -R --silent ${B}/pkg
+}
+
+
+INSANE_SKIP:${PN} = "already-stripped"
+INSANE_SKIP:${PN}-dev = "ldflags"
+
+RDEPENDS:${PN} = "go"
+RDEPENDS:${PN}-dev = "bash"
diff --git a/meta-security/recipes-ids/ossec/ossec-hids_3.6.0.bb b/meta-security/recipes-ids/ossec/ossec-hids_3.6.0.bb
index 778278b..309ca52 100644
--- a/meta-security/recipes-ids/ossec/ossec-hids_3.6.0.bb
+++ b/meta-security/recipes-ids/ossec/ossec-hids_3.6.0.bb
@@ -44,7 +44,7 @@
   install -m 640 ${D}/${sysconfdir}/ossec-init.conf ${D}/var/ossec/${sysconfdir}/ossec-init.conf
 }
 
-pkg_postinst_ontarget_${PN} () {
+pkg_postinst_ontarget:${PN} () {
     DIR="/var/ossec"
 
     usermod -g ossec -G ossec -a root
@@ -157,9 +157,9 @@
 }
 
 USERADD_PACKAGES = "${PN}"
-USERADD_PARAM_${PN} = "--system --home-dir /var/ossec -g ossec --shell /bin/false ossec"
-GROUPADD_PARAM_${PN} = "--system ossec"
+USERADD_PARAM:${PN} = "--system --home-dir /var/ossec -g ossec --shell /bin/false ossec"
+GROUPADD_PARAM:${PN} = "--system ossec"
 
-RDEPENDS_${PN} = "openssl bash"
+RDEPENDS:${PN} = "openssl bash"
 
-COMPATIBLE_HOST_libc-musl = "null"
+COMPATIBLE_HOST:libc-musl = "null"
diff --git a/meta-security/recipes-ids/samhain/samhain-client.bb b/meta-security/recipes-ids/samhain/samhain-client.bb
index 0f53a8c..2b99e20 100644
--- a/meta-security/recipes-ids/samhain/samhain-client.bb
+++ b/meta-security/recipes-ids/samhain/samhain-client.bb
@@ -8,5 +8,5 @@
         --with-port=${SAMHAIN_PORT} \
         "
 
-RDEPENDS_${PN} = "acl zlib attr bash"
-RCONFLICTS_${PN} = "samhain-standalone"
+RDEPENDS:${PN} = "acl zlib attr bash"
+RCONFLICTS:${PN} = "samhain-standalone"
diff --git a/meta-security/recipes-ids/samhain/samhain-server.bb b/meta-security/recipes-ids/samhain/samhain-server.bb
index e7a3aa6..51bce07 100644
--- a/meta-security/recipes-ids/samhain/samhain-server.bb
+++ b/meta-security/recipes-ids/samhain/samhain-server.bb
@@ -10,7 +10,7 @@
 
 TARGET_CC_ARCH += "${LDFLAGS}"
 
-do_install_append() {
+do_install:append() {
     if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
         install -d ${D}${sysconfdir}/tmpfiles.d
         install -m 0644 ${WORKDIR}/samhain-server-volatiles.conf \
@@ -25,5 +25,5 @@
         init/samhain.startLSB ${D}/var/lib/samhain
 }
 
-RDEPENDS_${PN} += "gmp bash perl"
-RCONFLICTS_${PN} = "samhain-standalone"
+RDEPENDS:${PN} += "gmp bash perl"
+RCONFLICTS:${PN} = "samhain-standalone"
diff --git a/meta-security/recipes-ids/samhain/samhain-standalone.bb b/meta-security/recipes-ids/samhain/samhain-standalone.bb
index 4fed9e9..445cb99 100644
--- a/meta-security/recipes-ids/samhain/samhain-standalone.bb
+++ b/meta-security/recipes-ids/samhain/samhain-standalone.bb
@@ -6,7 +6,7 @@
 
 PROVIDES += "samhain"
 
-SYSTEMD_SERVICE_${PN} = "samhain.service"
+SYSTEMD_SERVICE:${PN} = "samhain.service"
 
 inherit ptest
 
@@ -18,7 +18,7 @@
 	oe_runmake "$@"
 }
 
-do_install_append() {
+do_install:append() {
     ln -sf ${INITSCRIPT_NAME} ${D}${sysconfdir}/init.d/samhain
 }
 
@@ -27,5 +27,5 @@
 	install ${S}/cutest ${D}${PTEST_PATH}
 }
 
-RPROVIDES_${PN} += "samhain"
-RCONFLICTS_${PN} = "samhain-client samhain-server"
+RPROVIDES:${PN} += "samhain"
+RCONFLICTS:${PN} = "samhain-client samhain-server"
diff --git a/meta-security/recipes-ids/samhain/samhain.inc b/meta-security/recipes-ids/samhain/samhain.inc
index 0148e46..97f5f2d 100644
--- a/meta-security/recipes-ids/samhain/samhain.inc
+++ b/meta-security/recipes-ids/samhain/samhain.inc
@@ -37,7 +37,7 @@
 INITSCRIPT_PARAMS ?= "defaults"
 
 SYSTEMD_PACKAGES = "${PN}"
-SYSTEMD_SERVICE_${PN} = "${INITSCRIPT_NAME}.service"
+SYSTEMD_SERVICE:${PN} = "${INITSCRIPT_NAME}.service"
 SYSTEMD_AUTO_ENABLE = "disable"
 
 # mode mapping:
@@ -67,23 +67,23 @@
 PACKAGECONFIG[audit] = "ac_cv_header_auparse_h=yes,ac_cv_header_auparse_h=no,audit"
 PACKAGECONFIG[ps] = "--with-ps-path=${base_bindir}/ps,,,procps"
 
-EXTRA_OEMAKE_append_aarch64 = " CPPFLAGS+=-DCONFIG_ARCH_AARCH64=1"
-EXTRA_OEMAKE_append_mips64 = " CPPFLAGS+=-DCONFIG_ARCH_MIPS64=1"
+EXTRA_OEMAKE:append:aarch64 = " CPPFLAGS+=-DCONFIG_ARCH_AARCH64=1"
+EXTRA_OEMAKE:append:mips64 = " CPPFLAGS+=-DCONFIG_ARCH_MIPS64=1"
 
 do_unpack_samhain() {
     cd ${WORKDIR}
     tar -xzvf samhain-${PV}.tar.gz
 }
 
-python do_unpack_append() {
+python do_unpack:append() {
     bb.build.exec_func('do_unpack_samhain', d)
 }
 
-do_configure_prepend_arm() {
+do_configure:prepend:arm() {
     export sh_cv___va_copy=yes
 }
 
-do_configure_prepend_aarch64() {
+do_configure:prepend:aarch64() {
     export sh_cv___va_copy=yes
 }
 
@@ -91,7 +91,7 @@
 # use the prefix --oldincludedir=/usr/include which is not
 # recognized by Samhain's configure script and would invariably
 # throw back the error "unrecognized option: --oldincludedir=/usr/include"
-do_configure_prepend () {
+do_configure:prepend () {
     cat << EOF > ${S}/config-site.${BP}
 ssp_cv_lib=no
 sh_cv_va_copy=yes
@@ -124,13 +124,13 @@
 	${EXTRA_OECONF}
 }
 
-do_compile_prepend_libc-musl () {
+do_compile:prepend:libc-musl () {
 	sed -i 's/^#define HAVE_MALLOC_H.*//' ${B}/config.h
 }
 
 # Install the init script, it's default file, and the extraneous
 # documentation.
-do_install_append () {
+do_install:append () {
 	oe_runmake install DESTDIR='${D}' INSTALL=install-boot
 
 	install -D -m 755 ${WORKDIR}/${INITSCRIPT_NAME}.init \
@@ -165,4 +165,4 @@
 	rm -rf ${D}${localstatedir}/log
 }
 
-FILES_${PN} += "${systemd_system_unitdir}"
+FILES:${PN} += "${systemd_system_unitdir}"
diff --git a/meta-security/recipes-ids/suricata/files/0001-af-packet-fix-build-on-recent-Linux-kernels.patch b/meta-security/recipes-ids/suricata/files/0001-af-packet-fix-build-on-recent-Linux-kernels.patch
deleted file mode 100644
index 530568b..0000000
--- a/meta-security/recipes-ids/suricata/files/0001-af-packet-fix-build-on-recent-Linux-kernels.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From b37554e0bc3cf383e6547c5c6a69c6f6849c09e3 Mon Sep 17 00:00:00 2001
-From: Eric Leblond <eric@regit.org>
-Date: Wed, 17 Jul 2019 12:35:12 +0200
-Subject: [PATCH] af-packet: fix build on recent Linux kernels
-
-Upstream-Status: Backport
-Signed-off-by: Armin kuster <akuster808@gmail.com>
----
- src/source-af-packet.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
-Index: suricata-4.1.5/src/source-af-packet.c
-===================================================================
---- suricata-4.1.5.orig/src/source-af-packet.c
-+++ suricata-4.1.5/src/source-af-packet.c
-@@ -68,6 +68,10 @@
- #include <linux/sockios.h>
- #endif
- 
-+#if HAVE_LINUX_SOCKIOS_H
-+#include <linux/sockios.h>
-+#endif
-+
- #ifdef HAVE_PACKET_EBPF
- #include "util-ebpf.h"
- #include <bpf/libbpf.h>
diff --git a/meta-security/recipes-ids/suricata/files/no_libhtp_build.patch b/meta-security/recipes-ids/suricata/files/no_libhtp_build.patch
deleted file mode 100644
index 2ebf021..0000000
--- a/meta-security/recipes-ids/suricata/files/no_libhtp_build.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-Upstream-Status: Inappropriate [configuration]
-
-Signed-of_by: Armin Kuster <akuster808@gmail.com>
-
-Index: suricata-2.0.5/Makefile.am
-===================================================================
---- suricata-2.0.5.orig/Makefile.am
-+++ suricata-2.0.5/Makefile.am
-@@ -5,7 +5,7 @@ ACLOCAL_AMFLAGS = -I m4
- EXTRA_DIST = ChangeLog COPYING LICENSE suricata.yaml.in \
-              classification.config threshold.config \
-              reference.config
--SUBDIRS = $(HTP_DIR) src qa rules doc contrib scripts
-+SUBDIRS = src qa rules doc contrib scripts
- 
- CLEANFILES = stamp-h[0-9]*
- 
-Index: suricata-2.0.5/Makefile.in
-===================================================================
---- suricata-2.0.5.orig/Makefile.in
-+++ suricata-2.0.5/Makefile.in
-@@ -229,7 +229,6 @@ HAVE_PCAP_CONFIG = @HAVE_PCAP_CONFIG@
- HAVE_PKG_CONFIG = @HAVE_PKG_CONFIG@
- HAVE_PYTHON_CONFIG = @HAVE_PYTHON_CONFIG@
- HAVE_WGET = @HAVE_WGET@
--HTP_DIR = @HTP_DIR@
- HTP_LDADD = @HTP_LDADD@
- INSTALL = @INSTALL@
- INSTALL_DATA = @INSTALL_DATA@
-@@ -369,7 +368,7 @@ EXTRA_DIST = ChangeLog COPYING LICENSE s
-              classification.config threshold.config \
-              reference.config
- 
--SUBDIRS = $(HTP_DIR) src qa rules doc contrib scripts
-+SUBDIRS = src qa rules doc contrib scripts
- CLEANFILES = stamp-h[0-9]*
- all: config.h
- 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
diff --git a/meta-security/recipes-ids/suricata/files/run-ptest b/meta-security/recipes-ids/suricata/files/run-ptest
deleted file mode 100644
index 666ba9c..0000000
--- a/meta-security/recipes-ids/suricata/files/run-ptest
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/sh
-
-suricata -u
diff --git a/meta-security/recipes-ids/suricata/files/suricata.service b/meta-security/recipes-ids/suricata/files/suricata.service
deleted file mode 100644
index a99a76e..0000000
--- a/meta-security/recipes-ids/suricata/files/suricata.service
+++ /dev/null
@@ -1,20 +0,0 @@
-[Unit]
-Description=Suricata IDS/IDP daemon
-After=network.target
-Requires=network.target
-Documentation=man:suricata(8) man:suricatasc(8)
-Documentation=https://redmine.openinfosecfoundation.org/projects/suricata/wiki
-
-[Service]
-Type=simple
-CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_RAW
-RestrictAddressFamilies=
-ExecStart=/usr/bin/suricata -c /etc/suricata/suricata.yaml eth0
-ExecReload=/bin/kill -HUP $MAINPID
-PrivateTmp=yes
-ProtectHome=yes
-ProtectSystem=yes
-
-[Install]
-WantedBy=multi-user.target
-
diff --git a/meta-security/recipes-ids/suricata/files/suricata.yaml b/meta-security/recipes-ids/suricata/files/suricata.yaml
deleted file mode 100644
index 8d06a27..0000000
--- a/meta-security/recipes-ids/suricata/files/suricata.yaml
+++ /dev/null
@@ -1,1326 +0,0 @@
-%YAML 1.1
----
-
-# Suricata configuration file. In addition to the comments describing all
-# options in this file, full documentation can be found at:
-# https://redmine.openinfosecfoundation.org/projects/suricata/wiki/Suricatayaml
-
-
-# Number of packets allowed to be processed simultaneously.  Default is a
-# conservative 1024. A higher number will make sure CPU's/CPU cores will be
-# more easily kept busy, but may negatively impact caching.
-#
-# If you are using the CUDA pattern matcher (mpm-algo: ac-cuda), different rules
-# apply. In that case try something like 60000 or more. This is because the CUDA
-# pattern matcher buffers and scans as many packets as possible in parallel.
-#max-pending-packets: 1024
-
-# Runmode the engine should use. Please check --list-runmodes to get the available
-# runmodes for each packet acquisition method. Defaults to "autofp" (auto flow pinned
-# load balancing).
-#runmode: autofp
-
-# Specifies the kind of flow load balancer used by the flow pinned autofp mode.
-#
-# Supported schedulers are:
-#
-# round-robin       - Flows assigned to threads in a round robin fashion.
-# active-packets    - Flows assigned to threads that have the lowest number of
-#                     unprocessed packets (default).
-# hash              - Flow alloted usihng the address hash. More of a random
-#                     technique. Was the default in Suricata 1.2.1 and older.
-#
-#autofp-scheduler: active-packets
-
-# If suricata box is a router for the sniffed networks, set it to 'router'. If
-# it is a pure sniffing setup, set it to 'sniffer-only'.
-# If set to auto, the variable is internally switch to 'router' in IPS mode
-# and 'sniffer-only' in IDS mode.
-# This feature is currently only used by the reject* keywords.
-host-mode: auto
-
-# Run suricata as user and group.
-#run-as:
-#  user: suri
-#  group: suri
-
-# Default pid file.
-# Will use this file if no --pidfile in command options.
-#pid-file: /var/run/suricata.pid
-
-# Daemon working directory
-# Suricata will change directory to this one if provided
-# Default: "/"
-#daemon-directory: "/"
-
-# Preallocated size for packet. Default is 1514 which is the classical
-# size for pcap on ethernet. You should adjust this value to the highest
-# packet size (MTU + hardware header) on your system.
-#default-packet-size: 1514
-
-# The default logging directory.  Any log or output file will be
-# placed here if its not specified with a full path name.  This can be
-# overridden with the -l command line parameter.
-default-log-dir: /var/log/suricata/
-
-# Unix command socket can be used to pass commands to suricata.
-# An external tool can then connect to get information from suricata
-# or trigger some modifications of the engine. Set enabled to yes
-# to activate the feature. You can use the filename variable to set
-# the file name of the socket.
-unix-command:
-  enabled: no
-  #filename: custom.socket
-
-# Configure the type of alert (and other) logging you would like.
-outputs:
-
-  # a line based alerts log similar to Snort's fast.log
-  - fast:
-      enabled: yes
-      filename: fast.log
-      append: yes
-      #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
-
-  # Extensible Event Format (nicknamed EVE) event log in JSON format
-  - eve-log:
-      enabled: yes
-      type: file #file|syslog|unix_dgram|unix_stream
-      filename: eve.json
-      # the following are valid when type: syslog above
-      #identity: "suricata"
-      #facility: local5
-      #level: Info ## possible levels: Emergency, Alert, Critical,
-                   ## Error, Warning, Notice, Info, Debug
-      types:
-        - alert
-        - http:
-            extended: yes     # enable this for extended logging information
-            # custom allows additional http fields to be included in eve-log
-            # the example below adds three additional fields when uncommented
-            #custom: [Accept-Encoding, Accept-Language, Authorization]
-        - dns
-        - tls:
-            extended: yes     # enable this for extended logging information
-        - files:
-            force-magic: no   # force logging magic on all logged files
-            force-md5: no     # force logging of md5 checksums
-        #- drop
-        - ssh
-
-  # alert output for use with Barnyard2
-  - unified2-alert:
-      enabled: yes
-      filename: unified2.alert
-
-      # File size limit.  Can be specified in kb, mb, gb.  Just a number
-      # is parsed as bytes.
-      #limit: 32mb
-
-      # Sensor ID field of unified2 alerts.
-      #sensor-id: 0
-
-      # HTTP X-Forwarded-For support by adding the unified2 extra header that
-      # will contain the actual client IP address or by overwriting the source
-      # IP address (helpful when inspecting traffic that is being reversed
-      # proxied).
-      xff:
-        enabled: no
-        # Two operation modes are available, "extra-data" and "overwrite". Note
-        # that in the "overwrite" mode, if the reported IP address in the HTTP
-        # X-Forwarded-For header is of a different version of the packet
-        # received, it will fall-back to "extra-data" mode.
-        mode: extra-data
-        # Header name were the actual IP address will be reported, if more than
-        # one IP address is present, the last IP address will be the one taken
-        # into consideration.
-        header: X-Forwarded-For 
-
-  # a line based log of HTTP requests (no alerts)
-  - http-log:
-      enabled: yes
-      filename: http.log
-      append: yes
-      #extended: yes     # enable this for extended logging information
-      #custom: yes       # enabled the custom logging format (defined by customformat)
-      #customformat: "%{%D-%H:%M:%S}t.%z %{X-Forwarded-For}i %H %m %h %u %s %B %a:%p -> %A:%P"
-      #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
-
-  # a line based log of TLS handshake parameters (no alerts)
-  - tls-log:
-      enabled: no  # Log TLS connections.
-      filename: tls.log # File to store TLS logs.
-      append: yes
-      #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
-      #extended: yes # Log extended information like fingerprint
-      certs-log-dir: certs # directory to store the certificates files
-
-  # a line based log of DNS requests and/or replies (no alerts)
-  - dns-log:
-      enabled: no
-      filename: dns.log
-      append: yes
-      #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
-
-  # a line based log to used with pcap file study.
-  # this module is dedicated to offline pcap parsing (empty output
-  # if used with another kind of input). It can interoperate with
-  # pcap parser like wireshark via the suriwire plugin.
-  - pcap-info:
-      enabled: no
-
-  # Packet log... log packets in pcap format. 2 modes of operation: "normal"
-  # and "sguil".
-  #
-  # In normal mode a pcap file "filename" is created in the default-log-dir,
-  # or are as specified by "dir". In Sguil mode "dir" indicates the base directory.
-  # In this base dir the pcaps are created in th directory structure Sguil expects:
-  #
-  # $sguil-base-dir/YYYY-MM-DD/$filename.<timestamp>
-  #
-  # By default all packets are logged except:
-  # - TCP streams beyond stream.reassembly.depth
-  # - encrypted streams after the key exchange
-  #
-  - pcap-log:
-      enabled:  no
-      filename: log.pcap
-
-      # File size limit.  Can be specified in kb, mb, gb.  Just a number
-      # is parsed as bytes.
-      limit: 1000mb
-
-      # If set to a value will enable ring buffer mode. Will keep Maximum of "max-files" of size "limit"
-      max-files: 2000
-
-      mode: normal # normal or sguil.
-      #sguil-base-dir: /nsm_data/
-      #ts-format: usec # sec or usec second format (default) is filename.sec usec is filename.sec.usec
-      use-stream-depth: no #If set to "yes" packets seen after reaching stream inspection depth are ignored. "no" logs all packets
-
-  # a full alerts log containing much information for signature writers
-  # or for investigating suspected false positives.
-  - alert-debug:
-      enabled: no
-      filename: alert-debug.log
-      append: yes
-      #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
-
-  # alert output to prelude (http://www.prelude-technologies.com/) only
-  # available if Suricata has been compiled with --enable-prelude
-  - alert-prelude:
-      enabled: no
-      profile: suricata
-      log-packet-content: no
-      log-packet-header: yes
-
-  # Stats.log contains data from various counters of the suricata engine.
-  # The interval field (in seconds) tells after how long output will be written
-  # on the log file.
-  - stats:
-      enabled: yes
-      filename: stats.log
-      interval: 8
-
-  # a line based alerts log similar to fast.log into syslog
-  - syslog:
-      enabled: no
-      # reported identity to syslog. If ommited the program name (usually
-      # suricata) will be used.
-      #identity: "suricata"
-      facility: local5
-      #level: Info ## possible levels: Emergency, Alert, Critical,
-                   ## Error, Warning, Notice, Info, Debug
-
-  # a line based information for dropped packets in IPS mode
-  - drop:
-      enabled: no
-      filename: drop.log
-      append: yes
-      #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
-
-  # output module to store extracted files to disk
-  #
-  # The files are stored to the log-dir in a format "file.<id>" where <id> is
-  # an incrementing number starting at 1. For each file "file.<id>" a meta
-  # file "file.<id>.meta" is created.
-  #
-  # File extraction depends on a lot of things to be fully done:
-  # - stream reassembly depth. For optimal results, set this to 0 (unlimited)
-  # - http request / response body sizes. Again set to 0 for optimal results.
-  # - rules that contain the "filestore" keyword.
-  - file-store:
-      enabled: no       # set to yes to enable
-      log-dir: files    # directory to store the files
-      force-magic: no   # force logging magic on all stored files
-      force-md5: no     # force logging of md5 checksums
-      #waldo: file.waldo # waldo file to store the file_id across runs
-
-  # output module to log files tracked in a easily parsable json format
-  - file-log:
-      enabled: no
-      filename: files-json.log
-      append: yes
-      #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
-
-      force-magic: no   # force logging magic on all logged files
-      force-md5: no     # force logging of md5 checksums
-
-# Magic file. The extension .mgc is added to the value here.
-#magic-file: /usr/share/file/magic
-magic-file: /usr/share/misc/magic.mgc
-
-# When running in NFQ inline mode, it is possible to use a simulated
-# non-terminal NFQUEUE verdict.
-# This permit to do send all needed packet to suricata via this a rule:
-#        iptables -I FORWARD -m mark ! --mark $MARK/$MASK -j NFQUEUE
-# And below, you can have your standard filtering ruleset. To activate
-# this mode, you need to set mode to 'repeat'
-# If you want packet to be sent to another queue after an ACCEPT decision
-# set mode to 'route' and set next-queue value.
-# On linux >= 3.1, you can set batchcount to a value > 1 to improve performance
-# by processing several packets before sending a verdict (worker runmode only).
-# On linux >= 3.6, you can set the fail-open option to yes to have the kernel
-# accept the packet if suricata is not able to keep pace.
-nfq:
-#  mode: accept
-#  repeat-mark: 1
-#  repeat-mask: 1
-#  route-queue: 2
-#  batchcount: 20
-#  fail-open: yes
-
-#nflog support
-nflog:
-    # netlink multicast group
-    # (the same as the iptables --nflog-group param)
-    # Group 0 is used by the kernel, so you can't use it
-  - group: 2
-    # netlink buffer size
-    buffer-size: 18432
-    # put default value here
-  - group: default
-    # set number of packet to queue inside kernel
-    qthreshold: 1
-    # set the delay before flushing packet in the queue inside kernel
-    qtimeout: 100
-    # netlink max buffer size
-    max-size: 20000
-
-# af-packet support
-# Set threads to > 1 to use PACKET_FANOUT support
-af-packet:
-  - interface: eth0
-    # Number of receive threads (>1 will enable experimental flow pinned
-    # runmode)
-    threads: 1
-    # Default clusterid.  AF_PACKET will load balance packets based on flow.
-    # All threads/processes that will participate need to have the same
-    # clusterid.
-    cluster-id: 99
-    # Default AF_PACKET cluster type. AF_PACKET can load balance per flow or per hash.
-    # This is only supported for Linux kernel > 3.1
-    # possible value are:
-    #  * cluster_round_robin: round robin load balancing
-    #  * cluster_flow: all packets of a given flow are send to the same socket
-    #  * cluster_cpu: all packets treated in kernel by a CPU are send to the same socket
-    cluster-type: cluster_flow
-    # In some fragmentation case, the hash can not be computed. If "defrag" is set
-    # to yes, the kernel will do the needed defragmentation before sending the packets.
-    defrag: yes
-    # To use the ring feature of AF_PACKET, set 'use-mmap' to yes
-    use-mmap: yes
-    # Ring size will be computed with respect to max_pending_packets and number
-    # of threads. You can set manually the ring size in number of packets by setting
-    # the following value. If you are using flow cluster-type and have really network
-    # intensive single-flow you could want to set the ring-size independantly of the number
-    # of threads:
-    #ring-size: 2048
-    # On busy system, this could help to set it to yes to recover from a packet drop
-    # phase. This will result in some packets (at max a ring flush) being non treated.
-    #use-emergency-flush: yes
-    # recv buffer size, increase value could improve performance
-    # buffer-size: 32768
-    # Set to yes to disable promiscuous mode
-    # disable-promisc: no
-    # Choose checksum verification mode for the interface. At the moment
-    # of the capture, some packets may be with an invalid checksum due to
-    # offloading to the network card of the checksum computation.
-    # Possible values are:
-    #  - kernel: use indication sent by kernel for each packet (default)
-    #  - yes: checksum validation is forced
-    #  - no: checksum validation is disabled
-    #  - auto: suricata uses a statistical approach to detect when
-    #  checksum off-loading is used.
-    # Warning: 'checksum-validation' must be set to yes to have any validation
-    #checksum-checks: kernel
-    # BPF filter to apply to this interface. The pcap filter syntax apply here.
-    #bpf-filter: port 80 or udp
-    # You can use the following variables to activate AF_PACKET tap od IPS mode.
-    # If copy-mode is set to ips or tap, the traffic coming to the current
-    # interface will be copied to the copy-iface interface. If 'tap' is set, the
-    # copy is complete. If 'ips' is set, the packet matching a 'drop' action
-    # will not be copied.
-    #copy-mode: ips
-    #copy-iface: eth1
-  - interface: eth1
-    threads: 1
-    cluster-id: 98
-    cluster-type: cluster_flow
-    defrag: yes
-    # buffer-size: 32768
-    # disable-promisc: no
-  # Put default values here
-  - interface: default
-    #threads: 2
-    #use-mmap: yes
-
-legacy:
-  uricontent: enabled
-
-# You can specify a threshold config file by setting "threshold-file"
-# to the path of the threshold config file:
-# threshold-file: /etc/suricata/threshold.config
-
-# The detection engine builds internal groups of signatures. The engine
-# allow us to specify the profile to use for them, to manage memory on an
-# efficient way keeping a good performance. For the profile keyword you
-# can use the words "low", "medium", "high" or "custom". If you use custom
-# make sure to define the values at "- custom-values" as your convenience.
-# Usually you would prefer medium/high/low.
-#
-# "sgh mpm-context", indicates how the staging should allot mpm contexts for
-# the signature groups.  "single" indicates the use of a single context for
-# all the signature group heads.  "full" indicates a mpm-context for each
-# group head.  "auto" lets the engine decide the distribution of contexts
-# based on the information the engine gathers on the patterns from each
-# group head.
-#
-# The option inspection-recursion-limit is used to limit the recursive calls
-# in the content inspection code.  For certain payload-sig combinations, we
-# might end up taking too much time in the content inspection code.
-# If the argument specified is 0, the engine uses an internally defined
-# default limit.  On not specifying a value, we use no limits on the recursion.
-detect-engine:
-  - profile: medium
-  - custom-values:
-      toclient-src-groups: 2
-      toclient-dst-groups: 2
-      toclient-sp-groups: 2
-      toclient-dp-groups: 3
-      toserver-src-groups: 2
-      toserver-dst-groups: 4
-      toserver-sp-groups: 2
-      toserver-dp-groups: 25
-  - sgh-mpm-context: auto
-  - inspection-recursion-limit: 3000
-  # When rule-reload is enabled, sending a USR2 signal to the Suricata process
-  # will trigger a live rule reload. Experimental feature, use with care.
-  #- rule-reload: true
-  # If set to yes, the loading of signatures will be made after the capture
-  # is started. This will limit the downtime in IPS mode.
-  #- delayed-detect: yes
-
-# Suricata is multi-threaded. Here the threading can be influenced.
-threading:
-  # On some cpu's/architectures it is beneficial to tie individual threads
-  # to specific CPU's/CPU cores. In this case all threads are tied to CPU0,
-  # and each extra CPU/core has one "detect" thread.
-  #
-  # On Intel Core2 and Nehalem CPU's enabling this will degrade performance.
-  #
-  set-cpu-affinity: no
-  # Tune cpu affinity of suricata threads. Each family of threads can be bound
-  # on specific CPUs.
-  cpu-affinity:
-    - management-cpu-set:
-        cpu: [ 0 ]  # include only these cpus in affinity settings
-    - receive-cpu-set:
-        cpu: [ 0 ]  # include only these cpus in affinity settings
-    - decode-cpu-set:
-        cpu: [ 0, 1 ]
-        mode: "balanced"
-    - stream-cpu-set:
-        cpu: [ "0-1" ]
-    - detect-cpu-set:
-        cpu: [ "all" ]
-        mode: "exclusive" # run detect threads in these cpus
-        # Use explicitely 3 threads and don't compute number by using
-        # detect-thread-ratio variable:
-        # threads: 3
-        prio:
-          low: [ 0 ]
-          medium: [ "1-2" ]
-          high: [ 3 ]
-          default: "medium"
-    - verdict-cpu-set:
-        cpu: [ 0 ]
-        prio:
-          default: "high"
-    - reject-cpu-set:
-        cpu: [ 0 ]
-        prio:
-          default: "low"
-    - output-cpu-set:
-        cpu: [ "all" ]
-        prio:
-           default: "medium"
-  #
-  # By default Suricata creates one "detect" thread per available CPU/CPU core.
-  # This setting allows controlling this behaviour. A ratio setting of 2 will
-  # create 2 detect threads for each CPU/CPU core. So for a dual core CPU this
-  # will result in 4 detect threads. If values below 1 are used, less threads
-  # are created. So on a dual core CPU a setting of 0.5 results in 1 detect
-  # thread being created. Regardless of the setting at a minimum 1 detect
-  # thread will always be created.
-  #
-  detect-thread-ratio: 1.5
-
-# Cuda configuration.
-cuda:
-  # The "mpm" profile.  On not specifying any of these parameters, the engine's
-  # internal default values are used, which are same as the ones specified in
-  # in the default conf file.
-  mpm:
-    # The minimum length required to buffer data to the gpu.
-    # Anything below this is MPM'ed on the CPU.
-    # Can be specified in kb, mb, gb.  Just a number indicates it's in bytes.
-    # A value of 0 indicates there's no limit.
-    data-buffer-size-min-limit: 0
-    # The maximum length for data that we would buffer to the gpu.
-    # Anything over this is MPM'ed on the CPU.
-    # Can be specified in kb, mb, gb.  Just a number indicates it's in bytes.
-    data-buffer-size-max-limit: 1500
-    # The ring buffer size used by the CudaBuffer API to buffer data.
-    cudabuffer-buffer-size: 500mb
-    # The max chunk size that can be sent to the gpu in a single go.
-    gpu-transfer-size: 50mb
-    # The timeout limit for batching of packets in microseconds.
-    batching-timeout: 2000
-    # The device to use for the mpm.  Currently we don't support load balancing
-    # on multiple gpus.  In case you have multiple devices on your system, you
-    # can specify the device to use, using this conf.  By default we hold 0, to
-    # specify the first device cuda sees.  To find out device-id associated with
-    # the card(s) on the system run "suricata --list-cuda-cards".
-    device-id: 0
-    # No of Cuda streams used for asynchronous processing. All values > 0 are valid.
-    # For this option you need a device with Compute Capability > 1.0.
-    cuda-streams: 2
-
-# Select the multi pattern algorithm you want to run for scan/search the
-# in the engine. The supported algorithms are b2g, b2gc, b2gm, b3g, wumanber,
-# ac and ac-gfbs.
-#
-# The mpm you choose also decides the distribution of mpm contexts for
-# signature groups, specified by the conf - "detect-engine.sgh-mpm-context".
-# Selecting "ac" as the mpm would require "detect-engine.sgh-mpm-context"
-# to be set to "single", because of ac's memory requirements, unless the
-# ruleset is small enough to fit in one's memory, in which case one can
-# use "full" with "ac".  Rest of the mpms can be run in "full" mode.
-#
-# There is also a CUDA pattern matcher (only available if Suricata was
-# compiled with --enable-cuda: b2g_cuda. Make sure to update your
-# max-pending-packets setting above as well if you use b2g_cuda.
-
-mpm-algo: ac
-
-# The memory settings for hash size of these algorithms can vary from lowest
-# (2048) - low (4096) - medium (8192) - high (16384) - higher (32768) - max
-# (65536). The bloomfilter sizes of these algorithms can vary from low (512) -
-# medium (1024) - high (2048).
-#
-# For B2g/B3g algorithms, there is a support for two different scan/search
-# algorithms. For B2g the scan algorithms are B2gScan & B2gScanBNDMq, and
-# search algorithms are B2gSearch & B2gSearchBNDMq. For B3g scan algorithms
-# are B3gScan & B3gScanBNDMq, and search algorithms are B3gSearch &
-# B3gSearchBNDMq.
-#
-# For B2g the different scan/search algorithms and, hash and bloom
-# filter size settings. For B3g the different scan/search algorithms and, hash
-# and bloom filter size settings. For wumanber the hash and bloom filter size
-# settings.
-
-pattern-matcher:
-  - b2gc:
-      search-algo: B2gSearchBNDMq
-      hash-size: low
-      bf-size: medium
-  - b2gm:
-      search-algo: B2gSearchBNDMq
-      hash-size: low
-      bf-size: medium
-  - b2g:
-      search-algo: B2gSearchBNDMq
-      hash-size: low
-      bf-size: medium
-  - b3g:
-      search-algo: B3gSearchBNDMq
-      hash-size: low
-      bf-size: medium
-  - wumanber:
-      hash-size: low
-      bf-size: medium
-
-# Defrag settings:
-
-defrag:
-  memcap: 32mb
-  hash-size: 65536
-  trackers: 65535 # number of defragmented flows to follow
-  max-frags: 65535 # number of fragments to keep (higher than trackers)
-  prealloc: yes
-  timeout: 60
-
-# Enable defrag per host settings
-#  host-config:
-#
-#    - dmz:
-#        timeout: 30
-#        address: [192.168.1.0/24, 127.0.0.0/8, 1.1.1.0/24, 2.2.2.0/24, "1.1.1.1", "2.2.2.2", "::1"]
-#
-#    - lan:
-#        timeout: 45
-#        address:
-#          - 192.168.0.0/24
-#          - 192.168.10.0/24
-#          - 172.16.14.0/24
-
-# Flow settings:
-# By default, the reserved memory (memcap) for flows is 32MB. This is the limit
-# for flow allocation inside the engine. You can change this value to allow
-# more memory usage for flows.
-# The hash-size determine the size of the hash used to identify flows inside
-# the engine, and by default the value is 65536.
-# At the startup, the engine can preallocate a number of flows, to get a better
-# performance. The number of flows preallocated is 10000 by default.
-# emergency-recovery is the percentage of flows that the engine need to
-# prune before unsetting the emergency state. The emergency state is activated
-# when the memcap limit is reached, allowing to create new flows, but
-# prunning them with the emergency timeouts (they are defined below).
-# If the memcap is reached, the engine will try to prune flows
-# with the default timeouts. If it doens't find a flow to prune, it will set
-# the emergency bit and it will try again with more agressive timeouts.
-# If that doesn't work, then it will try to kill the last time seen flows
-# not in use.
-# The memcap can be specified in kb, mb, gb.  Just a number indicates it's
-# in bytes.
-
-flow:
-  memcap: 64mb
-  hash-size: 65536
-  prealloc: 10000
-  emergency-recovery: 30
-
-# This option controls the use of vlan ids in the flow (and defrag)
-# hashing. Normally this should be enabled, but in some (broken)
-# setups where both sides of a flow are not tagged with the same vlan
-# tag, we can ignore the vlan id's in the flow hashing.
-vlan:
-  use-for-tracking: true
-
-# Specific timeouts for flows. Here you can specify the timeouts that the
-# active flows will wait to transit from the current state to another, on each
-# protocol. The value of "new" determine the seconds to wait after a hanshake or
-# stream startup before the engine free the data of that flow it doesn't
-# change the state to established (usually if we don't receive more packets
-# of that flow). The value of "established" is the amount of
-# seconds that the engine will wait to free the flow if it spend that amount
-# without receiving new packets or closing the connection. "closed" is the
-# amount of time to wait after a flow is closed (usually zero).
-#
-# There's an emergency mode that will become active under attack circumstances,
-# making the engine to check flow status faster. This configuration variables
-# use the prefix "emergency-" and work similar as the normal ones.
-# Some timeouts doesn't apply to all the protocols, like "closed", for udp and
-# icmp.
-
-flow-timeouts:
-
-  default:
-    new: 30
-    established: 300
-    closed: 0
-    emergency-new: 10
-    emergency-established: 100
-    emergency-closed: 0
-  tcp:
-    new: 60
-    established: 3600
-    closed: 120
-    emergency-new: 10
-    emergency-established: 300
-    emergency-closed: 20
-  udp:
-    new: 30
-    established: 300
-    emergency-new: 10
-    emergency-established: 100
-  icmp:
-    new: 30
-    established: 300
-    emergency-new: 10
-    emergency-established: 100
-
-# Stream engine settings. Here the TCP stream tracking and reassembly
-# engine is configured.
-#
-# stream:
-#   memcap: 32mb                # Can be specified in kb, mb, gb.  Just a
-#                               # number indicates it's in bytes.
-#   checksum-validation: yes    # To validate the checksum of received
-#                               # packet. If csum validation is specified as
-#                               # "yes", then packet with invalid csum will not
-#                               # be processed by the engine stream/app layer.
-#                               # Warning: locally generated trafic can be
-#                               # generated without checksum due to hardware offload
-#                               # of checksum. You can control the handling of checksum
-#                               # on a per-interface basis via the 'checksum-checks'
-#                               # option
-#   prealloc-sessions: 2k       # 2k sessions prealloc'd per stream thread
-#   midstream: false            # don't allow midstream session pickups
-#   async-oneside: false        # don't enable async stream handling
-#   inline: no                  # stream inline mode
-#   max-synack-queued: 5        # Max different SYN/ACKs to queue
-#
-#   reassembly:
-#     memcap: 64mb              # Can be specified in kb, mb, gb.  Just a number
-#                               # indicates it's in bytes.
-#     depth: 1mb                # Can be specified in kb, mb, gb.  Just a number
-#                               # indicates it's in bytes.
-#     toserver-chunk-size: 2560 # inspect raw stream in chunks of at least
-#                               # this size.  Can be specified in kb, mb,
-#                               # gb.  Just a number indicates it's in bytes.
-#                               # The max acceptable size is 4024 bytes.
-#     toclient-chunk-size: 2560 # inspect raw stream in chunks of at least
-#                               # this size.  Can be specified in kb, mb,
-#                               # gb.  Just a number indicates it's in bytes.
-#                               # The max acceptable size is 4024 bytes.
-#     randomize-chunk-size: yes # Take a random value for chunk size around the specified value.
-#                               # This lower the risk of some evasion technics but could lead
-#                               # detection change between runs. It is set to 'yes' by default.
-#     randomize-chunk-range: 10 # If randomize-chunk-size is active, the value of chunk-size is
-#                               # a random value between (1 - randomize-chunk-range/100)*randomize-chunk-size
-#                               # and (1 + randomize-chunk-range/100)*randomize-chunk-size. Default value
-#                               # of randomize-chunk-range is 10.
-#
-#     raw: yes                  # 'Raw' reassembly enabled or disabled.
-#                               # raw is for content inspection by detection
-#                               # engine.
-#
-#     chunk-prealloc: 250       # Number of preallocated stream chunks. These
-#                               # are used during stream inspection (raw).
-#     segments:                 # Settings for reassembly segment pool.
-#       - size: 4               # Size of the (data)segment for a pool
-#         prealloc: 256         # Number of segments to prealloc and keep
-#                               # in the pool.
-#
-stream:
-  memcap: 32mb
-  checksum-validation: yes      # reject wrong csums
-  inline: auto                  # auto will use inline mode in IPS mode, yes or no set it statically
-  reassembly:
-    memcap: 128mb
-    depth: 1mb                  # reassemble 1mb into a stream
-    toserver-chunk-size: 2560
-    toclient-chunk-size: 2560
-    randomize-chunk-size: yes
-    #randomize-chunk-range: 10
-    #raw: yes
-    #chunk-prealloc: 250
-    #segments:
-    #  - size: 4
-    #    prealloc: 256
-    #  - size: 16
-    #    prealloc: 512
-    #  - size: 112
-    #    prealloc: 512
-    #  - size: 248
-    #    prealloc: 512
-    #  - size: 512
-    #    prealloc: 512
-    #  - size: 768
-    #    prealloc: 1024
-    #  - size: 1448
-    #    prealloc: 1024
-    #  - size: 65535
-    #    prealloc: 128
-
-# Host table:
-#
-# Host table is used by tagging and per host thresholding subsystems.
-#
-host:
-  hash-size: 4096
-  prealloc: 1000
-  memcap: 16777216
-
-# Logging configuration.  This is not about logging IDS alerts, but
-# IDS output about what its doing, errors, etc.
-logging:
-
-  # The default log level, can be overridden in an output section.
-  # Note that debug level logging will only be emitted if Suricata was
-  # compiled with the --enable-debug configure option.
-  #
-  # This value is overriden by the SC_LOG_LEVEL env var.
-  default-log-level: notice
-
-  # The default output format.  Optional parameter, should default to
-  # something reasonable if not provided.  Can be overriden in an
-  # output section.  You can leave this out to get the default.
-  #
-  # This value is overriden by the SC_LOG_FORMAT env var.
-  #default-log-format: "[%i] %t - (%f:%l) <%d> (%n) -- "
-
-  # A regex to filter output.  Can be overridden in an output section.
-  # Defaults to empty (no filter).
-  #
-  # This value is overriden by the SC_LOG_OP_FILTER env var.
-  default-output-filter:
-
-  # Define your logging outputs.  If none are defined, or they are all
-  # disabled you will get the default - console output.
-  outputs:
-  - console:
-      enabled: yes
-  - file:
-      enabled: no
-      filename: /var/log/suricata.log
-  - syslog:
-      enabled: yes
-      facility: local5
-      format: "[%i] <%d> -- "
-
-# Tilera mpipe configuration. for use on Tilera TILE-Gx.
-mpipe:
-
-  # Load balancing modes: "static", "dynamic", "sticky", or "round-robin".
-  load-balance: dynamic
-
-  # Number of Packets in each ingress packet queue. Must be 128, 512, 2028 or 65536
-  iqueue-packets: 2048
-
-  # List of interfaces we will listen on.
-  inputs:
-  - interface: xgbe2
-  - interface: xgbe3
-  - interface: xgbe4
-
-
-  # Relative weight of memory for packets of each mPipe buffer size.
-  stack:
-    size128: 0
-    size256: 9
-    size512: 0
-    size1024: 0
-    size1664: 7
-    size4096: 0
-    size10386: 0
-    size16384: 0
-
-# PF_RING configuration. for use with native PF_RING support
-# for more info see http://www.ntop.org/PF_RING.html
-pfring:
-  - interface: eth0
-    # Number of receive threads (>1 will enable experimental flow pinned
-    # runmode)
-    threads: 1
-
-    # Default clusterid.  PF_RING will load balance packets based on flow.
-    # All threads/processes that will participate need to have the same
-    # clusterid.
-    cluster-id: 99
-
-    # Default PF_RING cluster type. PF_RING can load balance per flow or per hash.
-    # This is only supported in versions of PF_RING > 4.1.1.
-    cluster-type: cluster_flow
-    # bpf filter for this interface
-    #bpf-filter: tcp
-    # Choose checksum verification mode for the interface. At the moment
-    # of the capture, some packets may be with an invalid checksum due to
-    # offloading to the network card of the checksum computation.
-    # Possible values are:
-    #  - rxonly: only compute checksum for packets received by network card.
-    #  - yes: checksum validation is forced
-    #  - no: checksum validation is disabled
-    #  - auto: suricata uses a statistical approach to detect when
-    #  checksum off-loading is used. (default)
-    # Warning: 'checksum-validation' must be set to yes to have any validation
-    #checksum-checks: auto
-  # Second interface
-  #- interface: eth1
-  #  threads: 3
-  #  cluster-id: 93
-  #  cluster-type: cluster_flow
-  # Put default values here
-  - interface: default
-    #threads: 2
-
-pcap:
-  - interface: eth0
-    # On Linux, pcap will try to use mmaped capture and will use buffer-size
-    # as total of memory used by the ring. So set this to something bigger
-    # than 1% of your bandwidth.
-    #buffer-size: 16777216
-    #bpf-filter: "tcp and port 25"
-    # Choose checksum verification mode for the interface. At the moment
-    # of the capture, some packets may be with an invalid checksum due to
-    # offloading to the network card of the checksum computation.
-    # Possible values are:
-    #  - yes: checksum validation is forced
-    #  - no: checksum validation is disabled
-    #  - auto: suricata uses a statistical approach to detect when
-    #  checksum off-loading is used. (default)
-    # Warning: 'checksum-validation' must be set to yes to have any validation
-    #checksum-checks: auto
-    # With some accelerator cards using a modified libpcap (like myricom), you
-    # may want to have the same number of capture threads as the number of capture
-    # rings. In this case, set up the threads variable to N to start N threads
-    # listening on the same interface.
-    #threads: 16
-    # set to no to disable promiscuous mode:
-    #promisc: no
-    # set snaplen, if not set it defaults to MTU if MTU can be known
-    # via ioctl call and to full capture if not.
-    #snaplen: 1518
-  # Put default values here
-  - interface: default
-    #checksum-checks: auto
-
-pcap-file:
-  # Possible values are:
-  #  - yes: checksum validation is forced
-  #  - no: checksum validation is disabled
-  #  - auto: suricata uses a statistical approach to detect when
-  #  checksum off-loading is used. (default)
-  # Warning: 'checksum-validation' must be set to yes to have checksum tested
-  checksum-checks: auto
-
-# For FreeBSD ipfw(8) divert(4) support.
-# Please make sure you have ipfw_load="YES" and ipdivert_load="YES"
-# in /etc/loader.conf or kldload'ing the appropriate kernel modules.
-# Additionally, you need to have an ipfw rule for the engine to see
-# the packets from ipfw.  For Example:
-#
-#   ipfw add 100 divert 8000 ip from any to any
-#
-# The 8000 above should be the same number you passed on the command
-# line, i.e. -d 8000
-#
-ipfw:
-
-  # Reinject packets at the specified ipfw rule number.  This config
-  # option is the ipfw rule number AT WHICH rule processing continues
-  # in the ipfw processing system after the engine has finished
-  # inspecting the packet for acceptance.  If no rule number is specified,
-  # accepted packets are reinjected at the divert rule which they entered
-  # and IPFW rule processing continues.  No check is done to verify
-  # this will rule makes sense so care must be taken to avoid loops in ipfw.
-  #
-  ## The following example tells the engine to reinject packets
-  # back into the ipfw firewall AT rule number 5500:
-  #
-  # ipfw-reinjection-rule-number: 5500
-
-# Set the default rule path here to search for the files.
-# if not set, it will look at the current working dir
-default-rule-path: /etc/suricata/rules
-rule-files:
- - botcc.rules
- - ciarmy.rules
- - compromised.rules
- - drop.rules
- - dshield.rules
- - emerging-activex.rules
- - emerging-attack_response.rules
- - emerging-chat.rules
- - emerging-current_events.rules
- - emerging-dns.rules
- - emerging-dos.rules
- - emerging-exploit.rules
- - emerging-ftp.rules
- - emerging-games.rules
- - emerging-icmp_info.rules
-# - emerging-icmp.rules
- - emerging-imap.rules
- - emerging-inappropriate.rules
- - emerging-malware.rules
- - emerging-misc.rules
- - emerging-mobile_malware.rules
- - emerging-netbios.rules
- - emerging-p2p.rules
- - emerging-policy.rules
- - emerging-pop3.rules
- - emerging-rpc.rules
- - emerging-scada.rules
- - emerging-scan.rules
- - emerging-shellcode.rules
- - emerging-smtp.rules
- - emerging-snmp.rules
- - emerging-sql.rules
- - emerging-telnet.rules
- - emerging-tftp.rules
- - emerging-trojan.rules
- - emerging-user_agents.rules
- - emerging-voip.rules
- - emerging-web_client.rules
- - emerging-web_server.rules
- - emerging-web_specific_apps.rules
- - emerging-worm.rules
- - tor.rules
- - decoder-events.rules # available in suricata sources under rules dir
- - stream-events.rules  # available in suricata sources under rules dir
- - http-events.rules    # available in suricata sources under rules dir
- - smtp-events.rules    # available in suricata sources under rules dir
- - dns-events.rules     # available in suricata sources under rules dir
- - tls-events.rules     # available in suricata sources under rules dir
-
-classification-file: /etc/suricata/classification.config
-reference-config-file: /etc/suricata/reference.config
-
-# Holds variables that would be used by the engine.
-vars:
-
-  # Holds the address group vars that would be passed in a Signature.
-  # These would be retrieved during the Signature address parsing stage.
-  address-groups:
-
-    HOME_NET: "[192.168.0.0/16,10.0.0.0/8,172.16.0.0/12]"
-
-    EXTERNAL_NET: "!$HOME_NET"
-
-    HTTP_SERVERS: "$HOME_NET"
-
-    SMTP_SERVERS: "$HOME_NET"
-
-    SQL_SERVERS: "$HOME_NET"
-
-    DNS_SERVERS: "$HOME_NET"
-
-    TELNET_SERVERS: "$HOME_NET"
-
-    AIM_SERVERS: "$EXTERNAL_NET"
-
-    DNP3_SERVER: "$HOME_NET"
-
-    DNP3_CLIENT: "$HOME_NET"
-
-    MODBUS_CLIENT: "$HOME_NET"
-
-    MODBUS_SERVER: "$HOME_NET"
-
-    ENIP_CLIENT: "$HOME_NET"
-
-    ENIP_SERVER: "$HOME_NET"
-
-  # Holds the port group vars that would be passed in a Signature.
-  # These would be retrieved during the Signature port parsing stage.
-  port-groups:
-
-    HTTP_PORTS: "80"
-
-    SHELLCODE_PORTS: "!80"
-
-    ORACLE_PORTS: 1521
-
-    SSH_PORTS: 22
-
-    DNP3_PORTS: 20000
-
-# Set the order of alerts bassed on actions
-# The default order is pass, drop, reject, alert
-action-order:
-  - pass
-  - drop
-  - reject
-  - alert
-
-# IP Reputation
-#reputation-categories-file: /etc/suricata/iprep/categories.txt
-#default-reputation-path: /etc/suricata/iprep
-#reputation-files:
-# - reputation.list
-
-# Host specific policies for defragmentation and TCP stream
-# reassembly.  The host OS lookup is done using a radix tree, just
-# like a routing table so the most specific entry matches.
-host-os-policy:
-  # Make the default policy windows.
-  windows: [0.0.0.0/0]
-  bsd: []
-  bsd-right: []
-  old-linux: []
-  linux: [10.0.0.0/8, 192.168.1.100, "8762:2352:6241:7245:E000:0000:0000:0000"]
-  old-solaris: []
-  solaris: ["::1"]
-  hpux10: []
-  hpux11: []
-  irix: []
-  macos: []
-  vista: []
-  windows2k3: []
-
-
-# Limit for the maximum number of asn1 frames to decode (default 256)
-asn1-max-frames: 256
-
-# When run with the option --engine-analysis, the engine will read each of
-# the parameters below, and print reports for each of the enabled sections
-# and exit.  The reports are printed to a file in the default log dir
-# given by the parameter "default-log-dir", with engine reporting
-# subsection below printing reports in its own report file.
-engine-analysis:
-  # enables printing reports for fast-pattern for every rule.
-  rules-fast-pattern: yes
-  # enables printing reports for each rule
-  rules: yes
-
-#recursion and match limits for PCRE where supported
-pcre:
-  match-limit: 3500
-  match-limit-recursion: 1500
-
-# Holds details on the app-layer. The protocols section details each protocol.
-# Under each protocol, the default value for detection-enabled and "
-# parsed-enabled is yes, unless specified otherwise.
-# Each protocol covers enabling/disabling parsers for all ipprotos
-# the app-layer protocol runs on.  For example "dcerpc" refers to the tcp
-# version of the protocol as well as the udp version of the protocol.
-# The option "enabled" takes 3 values - "yes", "no", "detection-only".
-# "yes" enables both detection and the parser, "no" disables both, and
-# "detection-only" enables detection only(parser disabled).
-app-layer:
-  protocols:
-    tls:
-      enabled: yes
-      detection-ports:
-        dp: 443
-
-      #no-reassemble: yes
-    dcerpc:
-      enabled: yes
-    ftp:
-      enabled: yes
-    ssh:
-      enabled: yes
-    smtp:
-      enabled: yes
-    imap:
-      enabled: detection-only
-    msn:
-      enabled: detection-only
-    smb:
-      enabled: yes
-      detection-ports:
-        dp: 139
-    # smb2 detection is disabled internally inside the engine.
-    #smb2:
-    #  enabled: yes
-    dns:
-      # memcaps. Globally and per flow/state.
-      #global-memcap: 16mb
-      #state-memcap: 512kb
-
-      # How many unreplied DNS requests are considered a flood.
-      # If the limit is reached, app-layer-event:dns.flooded; will match.
-      #request-flood: 500
-
-      tcp:
-        enabled: yes
-        detection-ports:
-          dp: 53
-      udp:
-        enabled: yes
-        detection-ports:
-          dp: 53
-    http:
-      enabled: yes
-      # memcap: 64mb
-
-      ###########################################################################
-      # Configure libhtp.
-      #
-      #
-      # default-config:           Used when no server-config matches
-      #   personality:            List of personalities used by default
-      #   request-body-limit:     Limit reassembly of request body for inspection
-      #                           by http_client_body & pcre /P option.
-      #   response-body-limit:    Limit reassembly of response body for inspection
-      #                           by file_data, http_server_body & pcre /Q option.
-      #   double-decode-path:     Double decode path section of the URI
-      #   double-decode-query:    Double decode query section of the URI
-      #
-      # server-config:            List of server configurations to use if address matches
-      #   address:                List of ip addresses or networks for this block
-      #   personalitiy:           List of personalities used by this block
-      #   request-body-limit:     Limit reassembly of request body for inspection
-      #                           by http_client_body & pcre /P option.
-      #   response-body-limit:    Limit reassembly of response body for inspection
-      #                           by file_data, http_server_body & pcre /Q option.
-      #   double-decode-path:     Double decode path section of the URI
-      #   double-decode-query:    Double decode query section of the URI
-      #
-      #   uri-include-all:        Include all parts of the URI. By default the
-      #                           'scheme', username/password, hostname and port
-      #                           are excluded. Setting this option to true adds
-      #                           all of them to the normalized uri as inspected
-      #                           by http_uri, urilen, pcre with /U and the other
-      #                           keywords that inspect the normalized uri.
-      #                           Note that this does not affect http_raw_uri.
-      #                           Also, note that including all was the default in
-      #                           1.4 and 2.0beta1.
-      #
-      #   meta-field-limit:       Hard size limit for request and response size
-      #                           limits. Applies to request line and headers,
-      #                           response line and headers. Does not apply to
-      #                           request or response bodies. Default is 18k.
-      #                           If this limit is reached an event is raised.
-      #
-      # Currently Available Personalities:
-      #   Minimal
-      #   Generic
-      #   IDS (default)
-      #   IIS_4_0
-      #   IIS_5_0
-      #   IIS_5_1
-      #   IIS_6_0
-      #   IIS_7_0
-      #   IIS_7_5
-      #   Apache_2
-      ###########################################################################
-      libhtp:
-
-         default-config:
-           personality: IDS
-
-           # Can be specified in kb, mb, gb.  Just a number indicates
-           # it's in bytes.
-           request-body-limit: 3072
-           response-body-limit: 3072
-
-           # inspection limits
-           request-body-minimal-inspect-size: 32kb
-           request-body-inspect-window: 4kb
-           response-body-minimal-inspect-size: 32kb
-           response-body-inspect-window: 4kb
-           # Take a random value for inspection sizes around the specified value.
-           # This lower the risk of some evasion technics but could lead
-           # detection change between runs. It is set to 'yes' by default.
-           #randomize-inspection-sizes: yes
-           # If randomize-inspection-sizes is active, the value of various
-           # inspection size will be choosen in the [1 - range%, 1 + range%]
-           # range
-           # Default value of randomize-inspection-range is 10.
-           #randomize-inspection-range: 10
-
-           # decoding
-           double-decode-path: no
-           double-decode-query: no
-
-         server-config:
-
-           #- apache:
-           #    address: [192.168.1.0/24, 127.0.0.0/8, "::1"]
-           #    personality: Apache_2
-           #    # Can be specified in kb, mb, gb.  Just a number indicates
-           #    # it's in bytes.
-           #    request-body-limit: 4096
-           #    response-body-limit: 4096
-           #    double-decode-path: no
-           #    double-decode-query: no
-
-           #- iis7:
-           #    address:
-           #      - 192.168.0.0/24
-           #      - 192.168.10.0/24
-           #    personality: IIS_7_0
-           #    # Can be specified in kb, mb, gb.  Just a number indicates
-           #    # it's in bytes.
-           #    request-body-limit: 4096
-           #    response-body-limit: 4096
-           #    double-decode-path: no
-           #    double-decode-query: no
-
-# Profiling settings. Only effective if Suricata has been built with the
-# the --enable-profiling configure flag.
-#
-profiling:
-  # Run profiling for every xth packet. The default is 1, which means we
-  # profile every packet. If set to 1000, one packet is profiled for every
-  # 1000 received.
-  #sample-rate: 1000
-
-  # rule profiling
-  rules:
-
-    # Profiling can be disabled here, but it will still have a
-    # performance impact if compiled in.
-    enabled: yes
-    filename: rule_perf.log
-    append: yes
-
-    # Sort options: ticks, avgticks, checks, matches, maxticks
-    sort: avgticks
-
-    # Limit the number of items printed at exit.
-    limit: 100
-
-  # per keyword profiling
-  keywords:
-    enabled: yes
-    filename: keyword_perf.log
-    append: yes
-
-  # packet profiling
-  packets:
-
-    # Profiling can be disabled here, but it will still have a
-    # performance impact if compiled in.
-    enabled: yes
-    filename: packet_stats.log
-    append: yes
-
-    # per packet csv output
-    csv:
-
-      # Output can be disabled here, but it will still have a
-      # performance impact if compiled in.
-      enabled: no
-      filename: packet_stats.csv
-
-  # profiling of locking. Only available when Suricata was built with
-  # --enable-profiling-locks.
-  locks:
-    enabled: no
-    filename: lock_stats.log
-    append: yes
-
-# Suricata core dump configuration. Limits the size of the core dump file to
-# approximately max-dump. The actual core dump size will be a multiple of the
-# page size. Core dumps that would be larger than max-dump are truncated. On
-# Linux, the actual core dump size may be a few pages larger than max-dump.
-# Setting max-dump to 0 disables core dumping.
-# Setting max-dump to 'unlimited' will give the full core dump file.
-# On 32-bit Linux, a max-dump value >= ULONG_MAX may cause the core dump size
-# to be 'unlimited'.
-
-coredump:
-  max-dump: unlimited
-
-napatech:
-    # The Host Buffer Allowance for all streams
-    # (-1 = OFF, 1 - 100 = percentage of the host buffer that can be held back)
-    hba: -1
-
-    # use_all_streams set to "yes" will query the Napatech service for all configured
-    # streams and listen on all of them. When set to "no" the streams config array
-    # will be used.
-    use-all-streams: yes
-
-    # The streams to listen on
-    streams: [1, 2, 3]
-
-# Includes.  Files included here will be handled as if they were
-# inlined in this configuration file.
-#include: include1.yaml
-#include: include2.yaml
diff --git a/meta-security/recipes-ids/suricata/files/tmpfiles.suricata b/meta-security/recipes-ids/suricata/files/tmpfiles.suricata
deleted file mode 100644
index fbf3784..0000000
--- a/meta-security/recipes-ids/suricata/files/tmpfiles.suricata
+++ /dev/null
@@ -1,2 +0,0 @@
-#Type Path        Mode UID  GID  Age Argument
-d /var/log/suricata 0755 root root
diff --git a/meta-security/recipes-ids/suricata/files/volatiles.03_suricata b/meta-security/recipes-ids/suricata/files/volatiles.03_suricata
deleted file mode 100644
index 4627bd3..0000000
--- a/meta-security/recipes-ids/suricata/files/volatiles.03_suricata
+++ /dev/null
@@ -1,2 +0,0 @@
-# <type> <owner> <group> <mode> <path> <linksource>
-d root root 0755 /var/log/suricata none
diff --git a/meta-security/recipes-ids/suricata/libhtp_0.5.36.bb b/meta-security/recipes-ids/suricata/libhtp_0.5.36.bb
deleted file mode 100644
index 8305f70..0000000
--- a/meta-security/recipes-ids/suricata/libhtp_0.5.36.bb
+++ /dev/null
@@ -1,15 +0,0 @@
-SUMMARY = "LibHTP is a security-aware parser for the HTTP protocol and the related bits and pieces."
-
-require suricata.inc
-
-LIC_FILES_CHKSUM = "file://../LICENSE;beginline=1;endline=2;md5=c70d8d3310941dcdfcd1e02800a1f548"
-
-DEPENDS = "zlib"
-
-inherit autotools pkgconfig
-
-CFLAGS += "-D_DEFAULT_SOURCE"
-
-S = "${WORKDIR}/suricata-${VER}/${BPN}"
-
-RDEPENDS_${PN} += "zlib"
diff --git a/meta-security/recipes-ids/suricata/python3-suricata-update_1.2.1.bb b/meta-security/recipes-ids/suricata/python3-suricata-update_1.2.1.bb
deleted file mode 100644
index bbdce69..0000000
--- a/meta-security/recipes-ids/suricata/python3-suricata-update_1.2.1.bb
+++ /dev/null
@@ -1,17 +0,0 @@
-SUMMARY = "The tool for updating your Suricata rules. "
-HOMEPAGE = "http://suricata-ids.org/"
-SECTION = "security Monitor/Admin"
-LICENSE = "GPLv2"
-
-LIC_FILES_CHKSUM = "file://LICENSE;beginline=1;endline=2;md5=c70d8d3310941dcdfcd1e02800a1f548"
-
-SRCREV = "50e857f75e576e239d8306a6ac55946a1ce252a6"
-SRC_URI = "git://github.com/OISF/suricata-update;branch='master-1.2.x'"
-
-S = "${WORKDIR}/git"
-
-inherit python3native python3targetconfig setuptools3
-
-RDEPENDS_${PN} = "python3-pyyaml python3-logging python3-compression"
-
-BBCLASSEXTEND = "native nativesdk"
diff --git a/meta-security/recipes-ids/suricata/suricata.inc b/meta-security/recipes-ids/suricata/suricata.inc
deleted file mode 100644
index 1ce0d74..0000000
--- a/meta-security/recipes-ids/suricata/suricata.inc
+++ /dev/null
@@ -1,8 +0,0 @@
-HOMEPAGE = "http://suricata-ids.org/"
-SECTION = "security Monitor/Admin"
-LICENSE = "GPLv2"
-
-VER = "4.1.10"
-SRC_URI = "http://www.openinfosecfoundation.org/download/suricata-${VER}.tar.gz"
-
-SRC_URI[sha256sum] = "4013cb13a2f3f7854328cf072319bba41896fad86d6b85b1cff4004f82aa7276"
diff --git a/meta-security/recipes-ids/suricata/suricata_4.1.10.bb b/meta-security/recipes-ids/suricata/suricata_4.1.10.bb
deleted file mode 100644
index bf08843..0000000
--- a/meta-security/recipes-ids/suricata/suricata_4.1.10.bb
+++ /dev/null
@@ -1,99 +0,0 @@
-SUMMARY = "The Suricata Engine is an Open Source Next Generation Intrusion Detection and Prevention Engine"
-
-require suricata.inc
-
-LIC_FILES_CHKSUM = "file://LICENSE;beginline=1;endline=2;md5=c70d8d3310941dcdfcd1e02800a1f548"
-
-SRC_URI += " \
-    file://volatiles.03_suricata \
-    file://tmpfiles.suricata \
-    file://suricata.yaml \
-    file://suricata.service \
-    file://run-ptest \
-    "
-
-UPSTREAM_CHECK_URI = "www.openinfosecfoundation.org/download"
-
-inherit autotools-brokensep pkgconfig python3-dir systemd ptest
-
-CFLAGS += "-D_DEFAULT_SOURCE -fcommon"
-
-CACHED_CONFIGUREVARS = "ac_cv_header_htp_htp_h=yes ac_cv_lib_htp_htp_conn_create=yes \
-                        ac_cv_path_HAVE_WGET=no ac_cv_path_HAVE_CURL=no "
-
-EXTRA_OECONF += " --disable-debug \
-    --enable-non-bundled-htp \
-    --disable-gccmarch-native \
-    --disable-suricata-update \
-    "
-
-PACKAGECONFIG ??= "htp jansson file pcre yaml pcap cap-ng net nfnetlink nss nspr"
-PACKAGECONFIG_append = " ${@bb.utils.contains('DISTRO_FEATURES', 'ptest', 'unittests', '', d)}"
-
-PACKAGECONFIG[htp] = "--with-libhtp-includes=${STAGING_INCDIR} --with-libhtp-libraries=${STAGING_LIBDIR}, ,libhtp,"
-PACKAGECONFIG[pcre] = "--with-libpcre-includes=${STAGING_INCDIR} --with-libpcre-libraries=${STAGING_LIBDIR}, ,libpcre ," 
-PACKAGECONFIG[yaml] = "--with-libyaml-includes=${STAGING_INCDIR} --with-libyaml-libraries=${STAGING_LIBDIR}, ,libyaml ,"
-PACKAGECONFIG[pcap] = "--with-libpcap-includes=${STAGING_INCDIR} --with-libpcap-libraries=${STAGING_LIBDIR}, ,libpcap ," 
-PACKAGECONFIG[cap-ng] = "--with-libcap_ng-includes=${STAGING_INCDIR} --with-libcap_ng-libraries=${STAGING_LIBDIR}, ,libcap-ng , "
-PACKAGECONFIG[net] = "--with-libnet-includes=${STAGING_INCDIR} --with-libnet-libraries=${STAGING_LIBDIR}, , libnet," 
-PACKAGECONFIG[nfnetlink] = "--with-libnfnetlink-includes=${STAGING_INCDIR} --with-libnfnetlink-libraries=${STAGING_LIBDIR}, ,libnfnetlink ,"
-PACKAGECONFIG[nfq] = "--enable-nfqueue, --disable-nfqueue,libnetfilter-queue,"
-
-PACKAGECONFIG[jansson] = "--with-libjansson-includes=${STAGING_INCDIR} --with-libjansson-libraries=${STAGING_LIBDIR},,jansson, jansson"
-PACKAGECONFIG[file] = ",,file, file"
-PACKAGECONFIG[nss] = "--with-libnss-includes=${STAGING_INCDIR} --with-libnss-libraries=${STAGING_LIBDIR}, nss, nss," 
-PACKAGECONFIG[nspr] = "--with-libnspr-includes=${STAGING_INCDIR} --with-libnspr-libraries=${STAGING_LIBDIR}, nspr, nspr," 
-PACKAGECONFIG[python] = "--enable-python, --disable-python, python3, python3" 
-PACKAGECONFIG[unittests] = "--enable-unittests, --disable-unittests," 
-
-export logdir = "${localstatedir}/log"
-
-do_install_append () {
-
-    install -d ${D}${sysconfdir}/suricata
-
-    oe_runmake install-conf DESTDIR=${D}
-
-    oe_runmake install-rules DESTDIR=${D}
-
-    install -d ${D}${sysconfdir}/suricata ${D}${sysconfdir}/default/volatiles
-    install -m 0644 ${WORKDIR}/volatiles.03_suricata  ${D}${sysconfdir}/default/volatiles/03_suricata
-
-    install -m 0644 ${S}/threshold.config ${D}${sysconfdir}/suricata
-
-    if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
-        install -d ${D}${sysconfdir}/tmpfiles.d
-        install -m 0644 ${WORKDIR}/tmpfiles.suricata ${D}${sysconfdir}/tmpfiles.d/suricata.conf
-
-        install -d ${D}${systemd_unitdir}/system
-        sed  -e s:/etc:${sysconfdir}:g \
-             -e s:/var/run:/run:g \
-             -e s:/var:${localstatedir}:g \
-             -e s:/usr/bin:${bindir}:g \
-             -e s:/bin/kill:${base_bindir}/kill:g \
-             -e s:/usr/lib:${libdir}:g \
-             ${WORKDIR}/suricata.service > ${D}${systemd_unitdir}/system/suricata.service
-    fi
-
-    # Remove /var/run as it is created on startup
-    rm -rf ${D}${localstatedir}/run
-
-}
-
-pkg_postinst_ontarget_${PN} () {
-if command -v systemd-tmpfiles >/dev/null; then
-    systemd-tmpfiles --create ${sysconfdir}/tmpfiles.d/suricata.conf
-elif [ -e ${sysconfdir}/init.d/populate-volatile.sh ]; then
-    ${sysconfdir}/init.d/populate-volatile.sh update
-fi
-}
-
-SYSTEMD_PACKAGES = "${PN}"
-
-PACKAGES =+ "${PN}-socketcontrol"
-FILES_${PN} += "${systemd_unitdir} ${sysconfdir}/tmpfiles.d"
-FILES_${PN}-socketcontrol = "${bindir}/suricatasc ${PYTHON_SITEPACKAGES_DIR}"
-
-CONFFILES_${PN} = "${sysconfdir}/suricata/suricata.yaml"
-
-RDEPENDS_${PN}-python = "python"
diff --git a/meta-security/recipes-ids/tripwire/tripwire_2.4.3.7.bb b/meta-security/recipes-ids/tripwire/tripwire_2.4.3.7.bb
index 36e5d00..3a9bc1d 100644
--- a/meta-security/recipes-ids/tripwire/tripwire_2.4.3.7.bb
+++ b/meta-security/recipes-ids/tripwire/tripwire_2.4.3.7.bb
@@ -60,18 +60,18 @@
     install -m 0644 ${WORKDIR}/tripwire.txt ${D}${docdir}/${BPN}
 }
 
-do_install_ptest_append () {
+do_install_ptest:append () {
 	install -d ${D}${PTEST_PATH}/tests
 	cp -a ${S}/src/test-harness/* ${D}${PTEST_PATH}
 	sed -i -e 's@../../../../bin@${sbindir}@'  ${D}${PTEST_PATH}/twtools.pm
 }
 
-FILES_${PN} += "${libdir} ${docdir}/${PN}/*"
-FILES_${PN}-dbg += "${sysconfdir}/${PN}/.debug"
-FILES_${PN}-staticdev += "${localstatedir}/lib/${PN}/lib*.a"
-FILES_${PN}-ptest += "${PTEST_PATH}/tests "
+FILES:${PN} += "${libdir} ${docdir}/${PN}/*"
+FILES:${PN}-dbg += "${sysconfdir}/${PN}/.debug"
+FILES:${PN}-staticdev += "${localstatedir}/lib/${PN}/lib*.a"
+FILES:${PN}-ptest += "${PTEST_PATH}/tests "
 
-RDEPENDS_${PN} += " perl nano msmtp cronie"
-RDEPENDS_${PN}-ptest = " perl lib-perl perl-modules "
+RDEPENDS:${PN} += " perl nano msmtp cronie"
+RDEPENDS:${PN}-ptest = " perl lib-perl perl-modules "
 
 PNBLACKLIST[tripwire] ?= "Upsteram project appears to be abondoned, fails to build with gcc11"